Is SQL Developer 1.5.1.54.40 compatible with older versions of Oracle DB?

I have SQL Developer 1.2.1 on one machine (this has Oracle installed on the PC) and SQL Developer 1.5.1.54.40 on another (this does not have Oracle installed on it)
I have set the same 3 database environments on both versions using Basic connection. They have exactly the same Host IP addresses and Port numbers and service names. I am using the same logins and passwords on the PCs.
When I test these 3 connections on the PC with 1.2.1, the test is successful
When I test on the PC with 1.51, the test succeeds with one of the connections which is on Oracle 9i, and fails on the remaining 2 connections which are on Oracle 8i=The Failure message I get is: "+*Failure: Test Failed. Unsupported Oracle Database Version*+"

Unfortunately for your 8i DBs, there is a note in the [release notes|http://www.oracle.com/technology/products/database/sql_developer/files/relnotes_v151.html] that says:
The JDBC drivers shipped are 11g R1. This means that users will no longer be able to connect to an Oracle 8.1.7 database.
theFurryOne

Similar Messages

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.

I'm unable to open my Office Word for Mac. The message say's check with developer to make sure Microsoft Word works with this version of Mac OS X.
Orginally I downloaded OFFICE from the Apple Store App, so unable to reinstall as it suggest.

Which version of Office, 2004, 2008 or 2011
and
MS Office is not available from the App Store, so where did you get it?

Older versions of Oracle and Developer 2000

Can anyone tell me where I can get older versions of Oracle and Developer 2000.
I'm looking for older versions so I don't have to upgrade my computer to run Oracle 8i and Developer 6.0.
Thanks

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by richcw:
Can anyone tell me where I can get older versions of Oracle and Developer 2000.
I'm looking for older versions so I don't have to upgrade my computer to run Oracle 8i and Developer 6.0.
Thanks<HR></BLOCKQUOTE>
For Developer/2000 release 2.x, you can download from www.developer2000.com website.
Good luck
null

Sql Developer Data Modeler all domains lost after changing to version 3.0

I have two questions:
1. Sql Developer Data Modeler - is it still a separate product? Or is it only available as integrated within Sql Developer?
2. After opening a model created with Data Modeler 2.0 with the new integrated Data Modeler 3.0 I lost all my domain definitions. What can I do to avoid this? Any help would be appreciated.
Thanks in advance
Holger

Hi Holger,
Sql Developer Data Modeler - is it still a separate product? Or is it only available as integrated within Sql Developer?Standalone version is here http://www.oracle.com/technetwork/developer-tools/datamodeler/overview/index.html
2. After opening a model created with Data Modeler 2.0 with the new integrated Data Modeler 3.0 I lost all my domain definitions. What can I do to avoid this? Any help would be appreciated.Copy file defaultdomains.xml from DM 2.0 installation to "sqldeveloper\sqldeveloper\extensions\oracle.datamodeler\types" directory (if you use version in SQL Developer) or to
"datamodeler\datamodeler\types" if you use standalone DM 3.0.
Location of this directory can be set in preferences - it's called system types directory there - it contains: default domains, RDBMS sites, logical types and custom scripts.
Philip

SQL Developer tool sometimes does not display data with date type

run the following query using the sql developer tool -
select effective_date from table1 where id = 123;
(the effective_date is stored in the database as date.)
one record is returned with no date in the filed.
However, if I change the query to
select to_char(effective_date, 'mm/dd/yyyy') from table1 where id = 123;
one record is returned with effective date.
Why?
Thanks for your help.

First off, there is a dedicated SQL Developer forum where lots of the developers hang out. Those folks are way more knowledgable that we are about the tool.
That said, I have no problem displaying dates. Do you just have a problem with this particular query/ field/ table? Or does it affect all dates? What version of SQL Developer are you using? 1.1 is out now.
Justin

SQL Developer 3.x won't horizontal slide with 2 fingers

My SQL Developer 2.x allowed sliding left & right via 2-fingers. e.g. When looking at a large number of columns (data) in a table.
SQL Developer 3.x doesn't seem to have a way to enable this - or it doesn't work?
Is there a workaround or a way to get this working?

Bryan,
I made an Early Access release (not an official release) yesterday to make GeoRaptor available to someone in Europe who identified a bug that only shows itself if you try to change the zoom/pan percentage in preferences.
The bug is caused because I used String.format() in the code and the format string that is supplied (stored as a preference) contains a % symbol on its own which String.format() interprets as a format token and tries to associate the percentage value with it rather than the actual parameter. The bug release contains a changed preference string (the % is "escaped" to be %%). Trivial really. We don't have enough testers.
I have not heard that the fix worked (though it worked in my testing).
There was also a minor change to the way GeoRaptor's Java code accesses the database connection associated with a result set generated by an ad-hoc SQL statement or table grid as occasionally GeoRaptor lost the connection. I am hoping for some testing of these two things before pushing for a bug fix release to the current one in the public domain.
No other work has been commenced on the next release of GeoRaptor as I am writing a book and I have had little communications from any GeoRaptor user about what they would like in a release.
regards
Simon

SQL Developer 4.0 EA2 -- Cannot use OpenLDAP with LDAP connect option

Hi,
I've got OpenLDAP setup to work with my Oracle clients, to serve up TNS connect strings, in lieu of having tnsnames.ora files scattered about hundreds of servers.
This is working fine with 10g/11g, both full and instant clients, no problem.
Now, I'm trying to configure SQL Developer 4.0 EA2 working with it, as well.
When I attempt to do so, I'm able to select the "LDAP" option in "Connection Type", and the "LDAP Server" drop down list is correctly populated with my LDAP server, from ldap.ora.
However, when I select it, I get the following error:
Status : Failure -[LDAP: error code 32 - No Such Object]
Now, I've done some research, and I monitored the slapd.log file, which shows me the following:
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 ACCEPT from IP=192.168.125.1:63781 (IP=0.0.0.0:389)
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 BIND dn="" method=128
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 RESULT tag=97 err=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SRCH base="" scope=2 deref=0 filter="(objectClass=orclContext)"
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SEARCH RESULT tag=101 err=32 nentries=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=2 UNBIND
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 closed
Which is a lot more detail, but reflects the corresponding error code, (32 - No Such Object).
After doing some testing with ldapsearch, I've been able to replicate what SQL Developer is doing, and get the exact same error.
That ldapsearch command is:
ldapsearch -h einstein -p 389 -c -x -D "" -b "" "(objectClass=orclContext)"
Looking in the slapd.log file, I find an identical error to what is produced from SQL Developer.
Further, the query that SQL Developer wants to do can be successfully done with the following ldapsearch:
ldapsearch -h einstein -p 389 -c -x -D "" -b "dc=proquest,dc=com" "(objectClass=orclContext)"
So, it seems the problem is with the fact that SQL Developer is not supplying a search base.
I'm no LDAP expert, and I'm really not sure where to turn next....
Is there a SQL Developer option that allows me to set that search base? Is there a configuration I'm missing on the LDAP server configuration?
Thanks,
-Mark

Well, that didn't take long. I managed to find a solution to the problem.
It comes down to the fact that SQL Developer doesn't supply a search base, and my LDAP server didn't have a default search base defined.
When I edited slapd.conf (the OpenLDAP config file) and added a "defaultsearchbase" parameter, and bounced the LDAP server, everything started to work.
I now have a working configuration with OpenLDAP and SQL Developer.
I'll mark this discussion as closed.
-Mark

Oracle sql developer ....Debugging problem even with the proper rights

Hi all,sorry for raising this question in this forum.I dont see SQL Developer forum anywhere.
I am trying to debug my pl-sql procedure but unable to do it.I have been given all the debugging rights by the DBA (that is what he tells me ).
I do get the bug icon ,and I do click a break point ,but after clicking the bug button
I just get this message in the Debugging-log panel
Connecting to the database ahdb_t5.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1859' )
Please help
Thx

This is the message I get once I click the debug button (after few seconds)
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '10.2.46.58', '1957' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1

SQL Developer 4 EA1 - External Tool Parameter Prompt With Generic Name

I have an external tool (WinSCP - an FTP/SCP program) integrated into SQL Developer.
The tool is set up as follows:
Program Executable:
C:\Program Files (x86)\WinSCP\WinSCP.exe
Arguments:
/console /command "open scp://root:${promptl:label=Password}@${promptl:label=Server}" "cd /gers/live/adhoc/${promptl:label=CRM_Directory}" "put ${file.path}"
Run Directory:
C:\Program Files (x86)\WinSCP
In 3.2
Dialog Title: "Invoke Tool"
Prompt: "Password"
In 4.0 EA1
Dialog Title: "Invoke Tool"
Prompt: "Tool Argument Value:"

Aces!!! You nailed it Gary...
Thank you.
I applied fixed noted in Re: Reduce SQLDeveloper memory footprint with JDK 1.7
For others, to summarize my changes.
product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
AddVMOption -XX:+UnlockExperimentalVMOptions
AddVMOption -XX:+UseG1GC
AddVMOption -XX:MaxGCPauseMillis=50
AddVMOption -XX:GCPauseIntervalMillis=200
AddVMOption -XX:MaxPermSize=128M
AddVMOption -Xms50M
AddVMOption -Xmx384M
AddVMOption -XX:MinHeapFreeRatio=10
AddVMOption -XX:MaxHeapFreeRatio=10
product\11.2.0\client_3\sqldeveloper\ide\bin\ide.conf
comment the following two lines as shown below
#AddVMOption -Xmx640M
#AddVMOption -Xms128M
Now SQL Developer runs at roughly 500 meg.
I guess the only thing I have left to ask others reviewing this would be if there is a way to get these memory values down without having much adverse impacts on SQL Developer based on newer JVM switches/functionalities.
The posts that drove these changes are old from a technologoical perspective :) 2010.
Tom

Download SQL Developer for Linux -- does it point to the Win version?

Hi everyone,
is it possible that the software behind the Linux version is the windows version instead?
--> Oracle SQL Developer 1.0, patch 1 (1.0.0.15.27)
--> --> http://www.oracle.com/technology/software/htdocs/sqllic.html?http://download.oracle.com/otn/java/sqldeveloper/sqldeveloper-1527-no-jre.zip
Best regards Georg

There are really just 3 different downloads - one for Windows that is bundled with the jre and tools.jar, another that is specific to Mac and the third is the unbundled release. The unbundled is for Windows users that already have a jdk 1.5 or for Linux users (who need to have or get a jdk 1.5). After initial feedback that it was difficult to decide which to select, we decided to list specific to your platform, even though that means a duplicate link behind the scenes.
-- Sharon

SQL Developer 3.0.04 generated scripts not compatible with Oracle 10g (XE)

HI,
I tried to do an export from one XE database (still 10g) to another XE database. (also 10g).
I tried to do a database copy as well as a separate export and import (by loading the file and running as a script).
Neither of them work without modifying the files as it seems that SQL Developer generates scripts that are only compatible with Oracle 11g.
- Create table contains "segment creation automatic"
- Storage clauses contain parts that are not compatible with 10g
I ran through the wizard several times but neither can I find an option to choose for compatibility with earlier versions of Oracle.
Checked the preferences screen as well.
Is this a well hidden option or is it not possible to make this work for 10g.
Extra : found workaround by removing the storage clause to the export. Is there another way that does not force me to remove the storage clause?
Edited by: kcaluwae on 24-jun-2011 6:03

I'm sure this is far from the supported way to fix this but, seeing that it's apparently an issue with the classpath or something in it, I hacked <sqldeveloper_install>\sqldeveloper\bin\sqldeveloper.bat and added [ORACLE_HOME]\jdbc\lib\ojdbc6.jar to the classpath. At least that gets me started with 3.0 and lets me create TNS connections.
I'd really appreciate a better solution, if any of you kind folks knows of something.
Thanks,
Kelly

SQL Developer "visits" each defined connection on startup

I am using SQL Developer 2.1.1.64. When I start it, it "visits" each defined connection. I'm using the term "visits" rather than "connects" because it doesn't auto-expand the entries in the Connections list, and it doesn't open up any SQL Worksheets. But it is DEFINITELY doing something which causes it to attempt to access each of the database servers (perhaps only to determine if a connection is possible).
Is there any way to turn this off?
The reason I ask: I have a number of connections pre-defined, for accessing customers' systems through a corporate VPN. Each time I access a customer system, the VPN prompts me to login and indicate a reason for access. I don't want to have to loop through all of those prompts every time I start SQL Developer.
Some of my colleagues are using older versions (1.2, 1.5), and they don't have this issue.

Hi kilsen,
Laptop have 4 connections which are on local vm and 7 connections on local database.
Local database not started, only started database on vm at 192.168.0.211.
Data from wireshark after starting SQL Developer.
No.   Time         Source            Destination          Protocol Info
374 35.733516   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.4? Tell 192.168.0.199
375 36.233705   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.34? Tell 192.168.0.199
376 36.272571   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.2? Tell 192.168.0.199
377 37.233707   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.34? Tell 192.168.0.199
378 37.233756   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.2? Tell 192.168.0.199
379 37.387648   Dell_ac:3b:49         Broadcast             ARP      Who has 192.168.0.211? Tell 192.168.0.199
380 37.387816   Vmware_ac:de:2e       Dell_ac:3b:49         ARP      192.168.0.211 is at 00:0c:29:ac:de:2eIt's broadcasting every 10 to 30 seconds looking for my local vm destinations where IP addresses are 192.168.0.2 , 4, 34 and 211.
When i login to vm 211 connection, data from wireshark:
384 37.388488   192.168.0.199         192.168.0.211         TNS      Request, Connect (1), ConnectFrom my limited observations, laptop only broadcast for local vm IP addresses and do not actually send request to connect.
Indeed there is no visible side effects felt on my laptop.
Because of my VPN, I get prompted each time an application initially accesses a remote server+
which would mean that it indeed send request to connect for vpn connection.
Unable to test as i have no vpn connection.
Would be interesting if you can install wireshark and check it out.
HTH
Zack

Password change fails in SQL Developer with verify function...

A couple of months ago I enforced a password verify function on our 11.2.0.3 databases and also one legacy 10.2.0.4 database.
At the time I tested on my account (which had elevated privileges...doh!).   Now some users are hitting expiry, they can't change it via SQL Developer.
If I create a user with 'create session' privilege and set their profile to one that uses the verify function (see both below), I then log in to SQL Developer (we have tried with versions 3.1 (Windows) and 3.2 (Linux) with same failure results.
BTW,.. the password verify function enforces the following:
password must be minimum of 8 characters
password must not be the same as the user name, or user name (1-100)
password must contain at least a single digit
password must contain at least a single character
1. Works = I log into the local server and run command line SQLPlus, type 'password' and update.   I can successfully change my password.
2. Fails = I log into the local server and run command line SQLPlus, type 'alter user <me> identified by <newpwd>;' I get:
TEST: SUTEMP > alter user sutemp identified by carport9999;
alter user sutemp identified by carport9999
ERROR at line 1:
ORA-28221: REPLACE not specified
This error is because the account does not have the 'alter user' privilege.   I'm okay with this, as I don't want our users having this privilege.
3. I start SQL Developer 3.2, type 'alter user <me> identified by <newpwd>;' I get the same ORA-28221 error as above.   That is fine, and as expected.
4. Now in SQL Developer, I type 'password', set a valid password, but I get 'Failed to change password' in the Script Output tab.
I have a database 'after servererror on database' trigger set, and querying the database table it is logging into, I see a record with a date stamp matching my failure with a server_error=28221 (the same as above).
So I'm wondering if I'm doing something wrong here, or if this is a bug in SQL Developer.   I don't want standard users having 'alter user' privileges, but I do want to enforce password verification.
I get the same result on three 11.2.0.3 databases (haven't tried any more but suspect same results for others) and one legacy 10.2.0.4 database, and using SQL Developer 3.1 and 3.2.
DBA_PROFILE used:
PROFILE
RESOURCE_NAME
RESOURCE LIMIT
CTRU
COMPOSITE_LIMIT
KERNEL     DEFAULT
CTRU
SESSIONS_PER_USER
KERNEL     10
CTRU
CPU_PER_SESSION
KERNEL     DEFAULT
CTRU
CPU_PER_CALL
KERNEL     DEFAULT
CTRU
LOGICAL_READS_PER_SESSION    KERNEL     DEFAULT
CTRU
LOGICAL_READS_PER_CALL
KERNEL     DEFAULT
CTRU
IDLE_TIME
KERNEL     DEFAULT
CTRU
CONNECT_TIME
KERNEL     DEFAULT
CTRU
PRIVATE_SGA
KERNEL     DEFAULT
CTRU
FAILED_LOGIN_ATTEMPTS
PASSWORD 10
CTRU
PASSWORD_LIFE_TIME
PASSWORD 180
CTRU
PASSWORD_REUSE_TIME
PASSWORD DEFAULT
CTRU
PASSWORD_REUSE_MAX
PASSWORD 5
CTRU
PASSWORD_VERIFY_FUNCTION     PASSWORD VERIFY_FUNCTION_11G
CTRU
PASSWORD_LOCK_TIME
PASSWORD .002
CTRU
PASSWORD_GRACE_TIME
PASSWORD 21
16 rows selected.
Verify Function used:
$ cat utlpwdmg.sql
Rem
Rem $Header: utlpwdmg.sql 02-aug-2006.08:18:05 asurpur Exp $
Rem
Rem utlpwdmg.sql
Rem
Rem Copyright (c) 2006, Oracle. All rights reserved.
Rem
Rem    NAME
Rem      utlpwdmg.sql - script for Default Password Resource Limits
Rem
Rem    DESCRIPTION
Rem      This is a script for enabling the password management features
Rem      by setting the default password resource limits.
Rem
Rem    NOTES
Rem      This file contains a function for minimum checking of password
Rem      complexity. This is more of a sample function that the customer
Rem      can use to develop the function for actual complexity checks that the
Rem      customer wants to make on the new password.
Rem
Rem    MODIFIED   (MM/DD/YY)
Rem    suren       05/09/13 - customise for NIHI use
Rem    asurpur     05/30/06 - fix - 5246666 beef up password complexity check
Rem    nireland    08/31/00 - Improve check for username=password. #1390553
Rem    nireland    06/28/00 - Fix null old password test. #1341892
Rem    asurpur     04/17/97 - Fix for bug479763
Rem    asurpur     12/12/96 - Changing the name of password_verify_function
Rem    asurpur     05/30/96 - New script for default password management
Rem    asurpur     05/30/96 - Created
Rem
-- This script sets the default password resource parameters
-- This script needs to be run to enable the password features.
-- However the default resource parameters can be changed based
-- on the need.
-- A default password complexity function is also provided.
-- This function makes the minimum complexity checks like
-- the minimum length of the password, password not same as the
-- username, etc. The user may enhance this function according to
-- the need.
-- This function must be created in SYS schema.
-- connect sys/<password> as sysdba before running the script
CREATE OR REPLACE FUNCTION verify_function_11G
(username varchar2,
password varchar2,
old_password varchar2)
RETURN boolean IS
   n boolean;
   m integer;
   differ integer;
   isdigit boolean;
   ischar boolean;
   ispunct boolean;
   db_name varchar2(40);
   digitarray varchar2(20);
   punctarray varchar2(25);
   chararray varchar2(52);
   i_char varchar2(10);
   simple_password varchar2(10);
   reverse_user varchar2(32);
BEGIN
   digitarray:= '0123456789';
   chararray:= 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ';
   -- Check for the minimum length of the password
   IF length(password) < 8 THEN
      raise_application_error(-20001, 'Password length less than 8');
   END IF;
   -- Check if the password is same as the username or username(1-100)
   IF NLS_LOWER(password) = NLS_LOWER(username) THEN
     raise_application_error(-20002, 'Password same as or similar to user');
   END IF;
   FOR i IN 1..100 LOOP
      i_char := to_char(i);
      if NLS_LOWER(username)|| i_char = NLS_LOWER(password) THEN
        raise_application_error(-20005, 'Password same as or similar to user name ');
      END IF;
    END LOOP;
   -- Check if the password contains at least one letter, one digit
   -- 1. Check for the digit
   isdigit:=FALSE;
   m := length(password);
   FOR i IN 1..10 LOOP
      FOR j IN 1..m LOOP
         IF substr(password,j,1) = substr(digitarray,i,1) THEN
            isdigit:=TRUE;
             GOTO findchar;
         END IF;
      END LOOP;
   END LOOP;
   IF isdigit = FALSE THEN
      raise_application_error(-20008, 'Password must contain at least one digit, one character');
   END IF;
   -- 2. Check for the character
   <<findchar>>
   ischar:=FALSE;
   FOR i IN 1..length(chararray) LOOP
      FOR j IN 1..m LOOP
         IF substr(password,j,1) = substr(chararray,i,1) THEN
            ischar:=TRUE;
             GOTO endsearch;
         END IF;
      END LOOP;
   END LOOP;
   IF ischar = FALSE THEN
      raise_application_error(-20009, 'Password must contain at least one digit, and one character');
   END IF;
   <<endsearch>>
   -- Check if the password differs from the previous password by at least
   -- 3 letters
   IF old_password IS NOT NULL THEN
     differ := length(old_password) - length(password);
     differ := abs(differ);
     IF differ < 3 THEN
       IF length(password) < length(old_password) THEN
         m := length(password);
       ELSE
         m := length(old_password);
       END IF;
       FOR i IN 1..m LOOP
         IF substr(password,i,1) != substr(old_password,i,1) THEN
           differ := differ + 1;
         END IF;
       END LOOP;
       IF differ < 3 THEN
         raise_application_error(-20011, 'Password should differ from the old password by at least 3 characters');
       END IF;
     END IF;
   END IF;
   -- Everything is fine; return TRUE ;
   RETURN(TRUE);
END;
alter profile ctru limit password_verify_function verify_function_11g;
alter profile default limit password_verify_function verify_function_11g;
alter profile web_and_it limit password_verify_function verify_function_11g;

okay,... I just saw another website which shows I should put in the 'replace <oldpwd>' clause in.
This works in SQL Developer:     alter user sutemp identified by carport999 replace garage999;
So why does the 'password' command fail?     (Developers: it would also be helpful to have the ORA- error displayed as opposed to 'Failed to change password')

I am not able to connect to database in sql developer.how to do?

I downloaded sqldeveloper 1.5.4.59.40. iam not able to establish connection to database. Can anyone tell me ?

Have you created a database (or have one you connect to)?
Have you created the Net Service connections for SQL Developer to use?
Does SQL Developer have access to this Net Serviice name?
Have you created the connections from SQL Developer?
Can you post an error message?
See
<br>
Oracle Database FAQs
</br>

Apex Listener 2.0.1 vs Sql Developer Administration 3.2.20.09 bugs

Apex Listener 2.0.1 / Sql Developer 3.2.20.09 / Apex 4.1.1
1. I'm using basic connection type with service name. Each time I connect to listener administration it is resetted to SID with default name as orcl.
2. Test Settings does not work in case hostname is localhost.
Database Settings apex:Cannot connect to APEX_PUBLIC_USER. Исключение ввода/вывода (input/output exception): The Network Adapter could not establish the connection>
At the same time it's working in defaults.xml:
<entry key="db.hostname">localhost</entry>I'm not sure why. Database and Apex Listener are installed on the same mashine. May be this can help:
<Warning> <Server> <x> <> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <> <BEA-002611> <Hostname "x", maps to multiple IP addresses: 10.110.x.x, 0:0:0:0:0:0:0:1> 3. I can see "Enable RESTful Services" action in (url http://docs.oracle.com/cd/E35137_01/appdev.32/e35117/intro.htm#autoId110)SQL Developer User's Guide. Still there is no such action in Sql Developer. Thus settings are always uploaded with enabled RESTful Services.
I see error
The pool named: apex_al does not existeach time I connect to Apex Listener Administration in case of RESTful Services is not configured during configuration of apex.war.
I can't find any restrictions for RESTful Services to be configured. So I think this error is unnecessary.
4. From sql developer User's Guide
Connect (context menu only): Connects to the Application Express Listener (see Connecting to Application Express Listener Server).Retrieve Settings, Upload Settings, and Launch URL are enabled when you connect to the Application Express Listener.>
administration settings are retrieved and displayed but still Retrieve Settings, Upload Settings, and Launch URL are disabled in context menu after connection.
I need to perform New Administration action to make them enabled.
Is this expected behavior ?
Is this all bugs or known features ?
Regards,
Igor

DB: V11.2
APEX V 4.2.3.00.08
APEX Listener: V2.0.5.287.04.27
SQLDeveloper: Version 3.2.20.09
OS WIndows 7 64 bit
I am trying to create a connection to a standalone Apex Listener installation via SQL Developer to manage the listener settings. I start a new connection and after entering the UN/PWD of the Listener Administrator I get the following error:
Authentication failed
"CANNOT CONNECT TO CONNECTION.
INVALID RESOURCE OWNER CREDENTIALS"
In the Standalone APEX Listener DOS window I'm getting the following error message:
SEVERE: The pool named: apex_al does not exist
So where do I even start to trouble shoot this???
I add a connection as follows:
Connection Name: Connection
Usename: adminlistener (pwd=adminlistener configured using command :java -jar apex.war user adminlistener "Listener Administrator")
HTTP radio button
Hostname: localhost
Port: 8080
Server Path: /apex
thanks in advance
Paul Platt

Is SQL Developer 1.5.1.54.40 compatible with older versions of Oracle DB?

Similar Messages

Maybe you are looking for