SQL error 9002 while Login SAP

Hi All,
Today we were upgrading ABAB and BASIS support pack . while the proccess was going we had an error "SQL error 9002 transaction log is full" after that session got terminate . now we unable to login SAP . We are getting this message "SQL error 9002 transaction log is full" at time of login . Now how do I login SAP and clear the transaction log. what is the solution of this problem .
Thanks in Advance
Jitendra Singh

Hello Jitendra,
whenever you usually do such type of basis tasks like patch upgrades and all it is preferable to switch off the logging so that transactional logs doesnt increase
I would recommed you to go to SQL server studio and change the automatic logging to simple...then you will not face any issues of transactional logs
but remember after your work is over switch automatic logging to full
Let me know of any questions
Rohit

Similar Messages

How do I troubleshoot "A non-SQL error occurred while requesting a connection from DSN ." errors?

Hello,
Last week we began seeing some timeout errors, but today there have been much more of them and I’m not sure how to proceed in troubleshooting.
We have 2 load balanced app servers:
Windows Server 2008 R2 (virtualized)
ColdFusion 8, Enterprise
And a database server:
Windows Server 2008 R2
SQL 2012
The error in “coldfusion-out.log” is:
A non-SQL error occurred while requesting a connection from <DSN>.
Timed out trying to establish connection
This only happens on one of the web servers, but it happens more frequently when the app servers is under a heavier load. Most of the day it works fine, but 4 or 5 times throughout the day we will have 1 – 15 requests timeout in a row(always varies), and then things will be fine again w/out restarting or doing anything.
The database server is much more powerful than the app server, and I don't believe the issue involves long running queries or the DB server being under heavy load.
I’m a DBA who is temporarily handling System Admin responsibilities, and I’m not sure how to further trouble shoot this. I just started some pings going from the app server to the database using IP and the listeners name. How else can I prepare for the next time it happens. What other logs should I be looking at to gain some insight? Are there PerfMon counters I could use to help troubleshoot?
Thanks for your help!

I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.

Error occurred while processing SAP SQL Tools for SQLServer (Database Copy)

Hello,
We are currently running ERP 6 EP4 support stacks 6. Two weeks ago we
refreshed our sandbox from QAS system and installed support stack 9 for
testing. Kernel was also upgraded from sp69 to sp137 as a part of the
support pack installation.
This week, I was asked to do another refresh of sandbox from the QAS system. As the
kernel was upgraded before to sp139, I copied back the previous kernel
file sp69 to the kernel folder and started refresh process as usual.
When I was running SAP for SQL, it ran successfully thorugh all the
steps but failed in the final steps with the following error logs:
=======================================================================
An error occurred while processing option SAP Toools for MS SQL Server
> Database Copy Completion( Last error reported by the step: System
call failed. Error 2 (The system cannot find the file specified. ) in
execution of system call 'CreateProcessAsUser' with parameter ( ,
NULL, Program Files/sapinst_instdir/MSS/CPY, &StartupInfo,
&ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64
\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450:
EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178:
EJS_Installer::invokeModuleCall() synxcchapp.cpp: 228:
CSyChildApplicationImpl::start(false) synxcchapp.cpp: 252:
CSyChildApplicationImpl::doStart() .). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.

I looked at the logs, very similar error to the one that I already posted:
ERROR      2011-07-08 09:29:49.861
           CJSlibModule::writeError_impl()
MUT-03025 Caught ESyException in Modulecall: At line 631 file synxcchapp.cpp
Call stack:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
TRACE      2011-07-08 09:29:49.861 [iaxxejsbas.hpp:488]
           EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR      2011-07-08 09:29:49.875 [sixxcstepexecute.cpp:971]
FCO-00011 The step doLI with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysLI|ind|ind|ind|ind|7|0|doLI was executed with status ERROR ( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'CreateProcessAsUser' with parameter (<token>, NULL, <command line for executable saplicense.exe, NULL, NULL, TRUE, 0x420, NULL, C:/Program Files/sapinst_instdir/MSS/CPY, &StartupInfo, &ProcessInfo), line (631) in file (synxcchapp.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-3_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcchapp.cpp: 228: CSyChildApplicationImpl::start(false)
synxcchapp.cpp: 252: CSyChildApplicationImpl::doStart()
TRACE      2011-07-08 09:29:49.886
Call block:CallBackInCaseOfAnErrorDuringStepExecution
    function:CallTheLogInquirer
is validator: true

Receiving SQL Error: INTERNAL_ERROR while executing the query

Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi Y

OSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers.

SQL error 3127 while saving message in transaction crm_dno_monitor

Hi gurus,
I have configured the sap servic desk in solution manager SP13 with oracle database as 10.2.0.2.0.
I am able to post a messahe from help-->create support message and with dno_notif_create.
I am trying to configure automatic e-mail functionality. I have done the required configuration as per sapnote      .But when i am changing the message from New-->to In process and trying to save the tranaction...after some time the session terminates stating" Sql error 3125".
I have check the Dump in ST22 "DBIF_REPO_SQL_ERROR it states " no new opration allowed until the current finishes..."
Here are the work process log details -->
C actual OCI-type SQLT_CHR of OUT-variable 0 differs from cached statement (SQLT_AFC) ==> reparsing
C sc_p=0643626C,no=47,idc_p=0644ADFC,con=0,act=1,slen=184,smax=256,#vars=3,stmt=19FF9208,table=REPOLOAD
C prep=1,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=05AE0084
C IN : cols=3,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=86,vmax=32,bound=1,iobuf_p=19D42068,vda_p=1E446DC8
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=9,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=32,bound=1,iobuf_p=00000000,vda_p=1E448558
C       lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT "UNAM" , "UDAT" , "UTIME" , "L_DATALG" , "Q_DATALG" , "SDAT" , "STIME" , "MINOR_VERS" , "MAJO\
C R_VERS" FROM "REPOLOAD" WHERE "PROGNAME" = :A0 AND "R3STATE" = :A1 AND "MACH" = :A2 ;
Kindly help to solve this error
Thanks,
Rasesh

Hi Rasesh,
This error indicates you have some problem at the oracle level communication. I would suggest you to contact an Oracle DBA who would help you better solving this error.
Regards
val

SQL error "-911" while running background job

Hi Experts,
We are getting the below runtime error while a background job is run.
SQL error "-911" when accessing table "DD02L".
Error Text of the Database: "SQL0911N The current transaction has been rolled
back because of a deadlock or timeout. Reason code "2". SQLSTATE=40001 row=1"
The error is happening at a delete statement.
Please let me know what might be the reason of this error and how this can be resolved.
Thanks,
Jissa.

Hi,
The system is taking very long for processing delete statement.
can u send me ur code, so based on that i will give u some idea.
Ram.

SQL Error 12801 while aggregate creation

Hi All,
I created a new aggregate for my cube.When i started the job for filling it the jog got finished but the activated didnt got filled.Folloewing is the job log from SM37.
SQL Error: 12801
Error in SQL Statement:
Error in SQL Statement:
New aggregation for aggregate 45186SONE7709PY9DIWK9TY4J(ZFIA_C12) for InfoCube starte
SQL Error: 12801
Error in SQL Statement:
Error in SQL Statement:
Job finished
I have gone through SAP notes 159779 and 986631 but couldnt decide whether these are applicable as much of these relates to BASIS.Has anyone solved the above problem using these notes or any other notes or any other clue where am i going wrong.
Any help would be appreciated.
Ajay

Hello Ajay,
I'm having this very same problem these days, and I haven't been able to solve it yet. I tried to recreate the aggregate but still not working. Did you get to solve it?
I would appreciatte any kind of help.
Thanks,
Luis.

The sql error:25153 while executing the ListCube

Hi All,
I have loaded data successfully in to my cube it is showing success in RSMO, but while executing the list cube of fieldselection for output with char' it is giving error like " sql error:25153 "
. But when i chose only key figures it is showing the data. What could be the problem .Please reply needs urgently.
Thanks one & All in advance.

If your underlying RDBMS for BW is Oracle, this error message number is thrown for when an attempt is being made to use space in a temporary tablespace that has no datafiles defined. This could be that there truly are no datafiles defined or it could be that the default temporary tablespace isn't set to a valid temporary tablespace.
You will need to have access to your RDBMS in order to resolve this yourself. If not, then have your DBA or Basis person resolve it

SQL error 1562 while import client copy

hi basis guys,
1st of all i export the client thro scc8 of (my prod server) after that i copy the request in dev client.( i extend the table space also.) but
when i m import the client thro stms i m getting the following error
Main import
Transport request___: PRDKT00019
System______________: DEV
tp path             : tp
Version and Release: 305.12.78 46D
SQL error 1562 accessing GLPCA: ORA-01562: failed to extend rollback segment numbe
   SQL error 1631 accessing MHIO: ORA-01631: max # extents (300) reached in table SA
   sap_dext called with message no. 4:
DBE_INTERNALERROR
db call info
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    MHIO
keylen:     124
key:        500000000010294
retcode:    4
SQL error 1631 accessing : ORA-01631: max # extents (300) reached in table SA
   Main import
End date and time : 20061128194135
Ended with return code: ===> 12 <===
regds
pardeep yadav

Hi,
       Extend the corresponding Tablespace in which the table MHIO resides and also increase the rollback segment.and try once more
Regards
Umesh K

Getting the following error message while login to OFA Analyst

Hi
I am getting the following error message while connecting to a OFA Analyst database and then I am not able to see any of the reports in OFA Analyst.
(MXXEQ35) RE.IWYD_Z70945 is not a valid RE.ENTRY
I think one of the report entry is corrupted in catalog but I am not sure how to restore/resolve it. Is there any way to resolve this problem ?
This is urgent Please let me know if any one have work around for this.
Thanks
Murugesan

See Note 230019.1 on Metalink for the solution to this problem.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

SQL Server 2012 Express error 9002 while restoring a backup from 2008

Hi all,
I have installed SQL Server 2012 Express on my laptop operating with win 8. Then I took the backup in my old laptop with SQL Server 2008R Express / Windows 7 and tried to restore it to the new one.
After it restored it produced an error messaging saying that restore failed. The error code was 9002 and it says due to NOTHING. I checked the log file it is a file of 1024 kb size, not big. When I installed the SQL 2012 I disabled the autogrowth of the
log file (exactly same setting as I had with 2008) The log is not big. I tried to further shrink, no change.
Moreover the db is already there with full records, I can manipulate it. Even take a back w/o problems. What is this issue? Is it resolved?
thanks

an error messaging saying that restore failed. The error code was 9002
and it says due to NOTHING. I
select *
from sys.messages
where message_id = 9002
=> "The transaction log for database '%ls' is full due to '%ls'. "
Is your disk may low on free space?
Olaf Helper
[ Blog] [ Xing] [ MVP]

Error occured while opening SAP Data servises

Hi When i open sap data services , attached error is coming . Kindly advice WR

Hi,
Refer the below notes
1826666 - Errors when logging in to Data Services Designer and License Manager
1812861 - Error: Base keycode for the Data Services platform was not found or has expired while launching Designer on node two in a Windows Cluster set up, SAP Data Services 14.x
as it is related to DS, i would request you to raise this type of issues in http://scn.sap.com/community/data-services

Getting SQL Error in BOBJ during SAP R/3 to XSD conversion

Hi ,
i an new to BOBJ, and doing some testing conversion from SAP database table to XSD i am getting follwoing error please help me to sort out this issue
13852 9292 RES-020148 03/08/2011 10:05:38 Query <Row> either selects from no object at all, or its SELECT produces <5> columns while the query output schema specifies
Thanks
Amit
Edited by: Amit Shivhare on Aug 3, 2011 4:36 PM

Hi,
then I would suggest you post your question into the EIM related forum.
regards
Ingo Hilgefort

Error # 2032 while opening SAP BI Query in Xcelsius using Direct connectivi

Hi Experts,
I have following set up -
Xcelsius Enterprise 2008 SP3
SAP BI EHP1 - SP5
Operating System - XP
SAP GUI 710.
I have two systems - 1. Internal IDES and 2. Client system
I open a Xcelsius and try to create a connection "SAP BW NetWeaver connection" in Xcelsius, I am prompted for login details.
1. When I give internal IDES system credentials, it logs me in and the queries are displayed and I can select any query without any error.
2. When I give client system credentials, it logs me in, and shows me the BW queries. Once I select any query, it gives me "Error # 2032"
RSPOR_T_PORTAL in SM30 is set properly as expected and explained in http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333393330333733303333%7D.do
Can anyone help me to resolve this issue?
Timely help would highly be appreciated!
Regards,
Rashmi

Hey there.
We've solved the problem on our test systems.
But we have got a special constellation. Our BW Portal is running on an other machine than the ABAP Stack.
Meaning, maybe it's not for all of you the solution.
But it was very simple in the end.
We've patched our System (ABAP and Java Stack) to SP6 (its now 7.01 SP6).
The reason was a missing rfc service that should have come with the SP5 patch. But it wasn't.
If the service is present could be tested with opening the following link:
http://<portalserver>/crossdomain.xml
Result shouldn't be the 404 page.
Please tell us if that was the solution for you, too.
Greetings

Error message while login

Hi ...
When i try to login to system through logon pad.i am getting popup box "SAP system message S" and i am not able to login to that particular system.
can you please provide the solution.
V.G.M. Dilip Kumar

Dear All,
please check the Sapgui version AND also the SAP kernel Patch level.
This is a known issue with an older Sapgui Patch level of the sapgui 7.10!
Please install the latest Sapgui patch 18. then you will see the right error messages in this popup.
Best Regards
Sven

SQL error 9002 while Login SAP

Similar Messages

Maybe you are looking for