SQL Express 2008 R2 and SQL 2005 Server SP1 in single Windows 2003 server
Hi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
Appreciate your help.
Sharon Lo
Hi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
There is no issue with installing multiple versions of SQL Server on a machine.I have SS 2005 ,2008 R2 and 2012 all on same machine and they work just fine. You can install all version instances side by side and all will work independently from
each other.
Now issue which might cause problem your SQL Server 2005 is SP1 which is a Blunder IMO. Please ASAP patch it to SP4 because you are running very old version of 2005 which is unsupported by Microsoft and also SP4 includes MANY fixes for SQLServer
2005. Applying SP4 will fix many issues and will bring you under Microsoft support.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles
Similar Messages
-
Issue with two SID installation in a Single Windows 2003 Server.
Hi,
When I install second installation in a same single machine where already One SID installed, first one is goes down.
But Database is working fine.....
Disp+Work.exe status first it goes to Yellow then goes down..
Kernal of First installation is already updated.
Disp+Work.exe ---> Develeoper_Trc detail is following..
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid TRN
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 159
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 6360
Thu Oct 30 16:22:26 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6360) [dpxxdisp.c 1254]
shared lib "dw_xml.dll" version 159 successfully loaded
shared lib "dw_xtc.dll" version 159 successfully loaded
shared lib "dw_stl.dll" version 159 successfully loaded
shared lib "dw_gui.dll" version 159 successfully loaded
shared lib "dw_mdm.dll" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Thu Oct 30 16:22:31 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5403]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ides_TRN_01 <
DpShMCreate: sizeof(wp_adm) 21008 (1616)
DpShMCreate: sizeof(tm_adm) 5912624 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EF60050, size: 6604928)
DpShMCreate: allocated sys_adm at 000000000EF60050
DpShMCreate: allocated wp_adm at 000000000EF62150
DpShMCreate: allocated tm_adm_list at 000000000EF67360
DpShMCreate: allocated tm_adm at 000000000EF673C0
DpShMCreate: allocated wp_ca_adm at 000000000F50ABF0
DpShMCreate: allocated appc_ca_adm at 000000000F5109B0
DpShMCreate: allocated comm_adm at 000000000F5128F0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F599580
DpShMCreate: allocated gw_adm at 000000000F599600
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F599630
DpShMCreate: allocated wall_adm at 000000000F599640
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 6764
argv[0] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[1] = E:\usr\sap\TRN\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64999
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=TRN
argv[7] = -DSAPMYNAME=ides_TRN_01
argv[8] = -DSAPPROFILE=E:\usr\sap\TRN\SYS\profile\TRN_DVEBMGS01_ides
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1656]
***LOG Q0K=> DpMsAttach, mscon ( ides) [dpxxdisp.c 11937]
DpStartStopMsg: send start message (myname is >ides_TRN_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu Oct 30 16:22:36 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 5 / sock 292
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:4516) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6764)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu Oct 30 16:23:11 2008
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:21 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Oct 30 10:53:21 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6800 Ended no 1 0 0
1 DIA 6796 Ended no 1 0 0
2 DIA 6760 Ended no 1 0 0
3 DIA 6772 Ended no 1 0 0
4 DIA 6896 Ended no 1 0 0
5 DIA 6848 Ended no 1 0 0
6 UPD 6860 Ended no 1 0 0
7 ENQ 6784 Ended no 1 0 0
8 BTC 6864 Ended no 1 0 0
9 BTC 6892 Ended no 1 0 0
10 BTC 6924 Ended no 1 0 0
11 SPO 6928 Ended no 1 0 0
12 UP2 6908 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 30 10:53:21 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Oct 30 10:53:21 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T13, U14, , gokul_ggn, 16:22:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Thu Oct 30 10:53:21 2008
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:26 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ides_TRN_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (6752) (SOFT_KILL)
Stop icman
killing process (6700) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 13
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
return errno (-17) to T13
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: hdl 5 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T13 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 5 in set0
SiSelNSet: set events of sock 292 to: ---
NiBufISelRemove: remove hdl 5 from set0
SiSelNRemove: removed sock 292 (pos=2)
SiSelNRemove: removed sock 292
NiSelIRemove: removed hdl 5
DpDelSocketInfo: del info for socket 5 (type=3)
NiICloseHandle: shutdown and close hdl 5 / sock 292
NiBufIClose: clear extension for hdl 5
dp_tm_adm[13].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1225364011/669000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 13
DpListInsert: insert elem 13 into tmadm_free_list (at begin)
DpListInsert: 188 elems in tmadm_free_list
DpListRemove: remove elem 13 from tmadm_inuse_list
DpListRemove: 13 elems in tmadm_inuse_list
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:6752 HANDLE:404)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:27 2008
NiISelect: TIMEOUT occured (1000ms)
Thu Oct 30 16:23:28 2008
[DpProcDied] Process died (PID:6752 HANDLE:404)
wait for end of icman
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:29 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:31 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:32 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:33 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:34 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:35 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:37 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:6700 HANDLE:412)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=437
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 30 16:23:38 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:6700 HANDLE:412)
[DpProcDied] Process died (PID:6764 HANDLE:388)
DpStartStopMsg: send stop message (myname is >ides_TRN_01 <)
NiIMyHostName: hostname = 'ides'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Oct 30 16:23:39 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12283]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 332 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 332 (pos=3)
SiSelNRemove: removed sock 332
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/13
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 332
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 6360) [dpxxdisp.c 10484]
Good Bye .....
Please help out.
Thanks in Advance.
Regards,
Gokul CahndolaYes Finally I Got the solution.
please check
>r3trans -d To Check Conectivity between Apps and DB Server.
If 000 then its OK- mean connectivity is OK, in this case all work.
when I was installing Second system then tnsname.ora and listner file was creating and privios system entry was removed. DUE to that reasion First one goes down.
Solution:- Both system entry should be Listner and tnsname file. Then Both server will work.
**********THANKS TO "AC"**************
Regards,
Gokul Chandola -
BO XI R2 works better on windows 2003 server 32 bit or windows 2003 server 64 bit
Post Author: abdulachukatla
CA Forum: Authentication
I need one small clarification regarding Business Objects Enterprise Edition, kindly request you to provide the information on, whether BO XI E will work better on windows 2003 32bit server or windows 2003 64bit server.
Thanks in Advance
AbdulHello...aahh..MickyMouse
could you please provide some more details. I never saw that you have to login during the installation to anything !
Or are you trying to install a ServicePack for Rel.2 ?
Regards
-Seb. -
XServe running MS Windows 2003 server + MS SQL 2005
I am planning to deploy 3 XServes,
One running Windows 2003 Server + MS SQL 2005
the other 2 runnung Windows 2003 Server + MS Terminal Server
Wonder if there's anyone can share the experience for the above configuration?
Rgds,
chiacyDigging around Macbytes.com, I came across this article:
http://weblog.infoworld.com/enterprisemac/archives/2006/12/killtwowindow.html
To quote:
"I have tested, and continue to run in a production setting, two instances of Windows 2003 Server hosted by Parallels Desktop, running on OS X Server 10.4.8 on a 3 GHz Xserve. To skip to the punch line, it works, and it's as fast as all get-out."
HTH
Xserve Dual 2.3 GHz Mac OS X (10.3.9) -
Accessing a Windows 2003 Server
Hi; this question may have been dealt with already but I'm new here so please indulge me a bit. My office network runs on windows 2003 file server but I just got myself a MacBook Pro. I can see the file server but can't access it. I have MS Office for Mac 2004 installed (Student edition)
Should it be possible for me to access files on a file server that runs on windows 2003 server? If yes, what do I need to do on either my Mac or ask the admin to do on the server?
CheersI'm also running several Macs on a Windows Small Business Server (Windows Server 2003) and the only way I am able to pull up the files was to join each one of my Macs to the Windows Server's network domain. You have to do this through the Directory Utility in the Utilities folder. There is one draw back from what I can tell, and it's something that I need some help with. It seems that once a Mac (running Leopard) is joined to a Windows domain, it takes the log in process forever to finish. Logging into a Leopard Mac alone is pretty quick, but after joining the domain, logging into any of the Macs on the Windows domain takes over a minute. If anyone knows the answer to this one, I'm all ears.
-
Can i use sql server express 2008, 2012, and 2014 for commercial purpose?
Good day,
I saw that the sql server express 2005 can be used for commercial purpose without buying additional license
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8df18025-fc2b-43c2-8476-532336ff09e3/sql-server-express-for-commercial-use?forum=sqlexpress
the question is can I do the same for sql server express 2008,2012, and 2014?
can I install and use sql server express 2008, 2012 and 2014 on an azure vm? specifically
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/
A0 instance
just an off topic question, is it required to pay to use sql server on virtual machines?
why is there a different pricing here
http://azure.microsoft.com/en-us/pricing/details/virtual-machines/#SqlHello,
Yes, you can use all versions SQL Server Express for commercial use. Please read more resources about it.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/01dbc5c3-b5fe-42d4-9eb9-91683cf8285b/can-any-commercial-application-that-uses-sql-server-express-freely-redistribute-the-sql-server?forum=sqlexpress
https://social.technet.microsoft.com/Forums/en-US/661ebf2e-ff2f-4dae-a8ae-e2179a764c09/sql-server-2012-express-in-commercial-product?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL express 2008 r2 on windows server 2003
install ends with the following error :
"MsiEnumRelatedProducts failed to enumerate products with UpgradeCode='{1B117BA7-5BC1-419E-820E-7D4F3F412C7B}'. Error code: 1610."Hi Hadi,
Did you reinstall your SQL Express 2008 R2 or you did a fresh installation? According to the error message "MsiEnumRelatedProducts failed to enumerate products with
UpgradeCode='{1B117BA7-5BC1-419E-820E-7D4F3F412C7B}'. Error code: 1610." , this issue is probably caused by that you tried to install SQL Server Express 2008 R2 with some components which had been installed.
So if you are going to reinstall the SQL Server 2008 R2, please try to remove the old SQL Server by the following steps, and reinstall the SQL Server Express 2008 R2
again:
1. Make sure you have administrative rights on the computer.
2. Uninstall the existing SQL Server 2008 and all the components from the control panel.
3. Backup the registry.
4. Delete the following keys in regedit:
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server
--HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSSQLServer
5. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall and delete all the sub-keys referencing SQL Server.
6. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and delete all the keys referencing SQL Server.
7. Rename all the SQL Server folders in the computer.
8. Reboot the machine
9. Install SQL Server again.
To further investigation, please collect the error messages logged into the setup log files which are located in the %Program files%\Microsoft SQL Server\100\Setup
bootstrap\Log\ folder.
You can send the logs to sqltnsp AT Microsoft.com (Please replace AT with @) with this format:
#Sample
Subject: MSDN/TechNet forum question: <Thread Title>
Attachments: <files>
Hi Grace,
ThreadURL:<URL>
<Additional information>
#End
For more information about how to View and Read SQL Server Setup Log Files, please see
http://msdn.microsoft.com/en-us/library/ms143702.aspx.
If you have any other questions, please feel free to ask.
Thanks,
Grace -
XL Reporter in Sap 8.8 PL 16running On Server 2008 R2 and SQL 2008 R2
Within the above environment (XL Reporter in Sap 8.8 PL 16 running On Server 2008 R2 and SQL 2008 R2)
Xl reporter is loading and appears to work fine until you look at the spreadsheet result
It is completely blank except for the titles
Yet Excel Macros and the attachment paths are defined correctly
As can be seen when we export any report to Excel successfully
I've had another consultant look at my setup carefully just to be sure
He can't figure out why
Anyone with similar results
I would appreciate any comments
Georges OstiguyEven something as simple as a list of BP 's and phone number gives a blank report
When my friend who knows xl reporter much more than I do tried, he managed to get the
BP numbers but nothing further
I then brought him to another server with the same configuration , same result
He then tried it on one of his own servers with similar config = same result
Server 2008 Standard R2 64bit
MSSQL 2008 R2
SAP 8.8 PL 16
Sample demo database
I don't get it -
Cannot find service {0}. Parameter name: SQLWriter SQL Express 2008 R2 SP2
Hi, installing SQL Express 2008 R2 SP2 onto Windows Server 2012 R2. I had previously removed SQL Express 2012 due to failed install due to incompatibility with our SAN. (I had uninstalled it via Programs & Features,
and also by following Shanky's tips. http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx).
This is what's in Detail log:
014-10-07 13:12:00 Slp: Parameter 5 : SqlEngineConfigAction_install_confignonrc
2014-10-07 13:12:00 Slp: Parameter 6 : 0x50806C41
014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL
Server.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2014-10-07 13:12:01 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141007_122920\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2014-10-07 13:12:02 Slp: Cannot find service {0}.
The SqlEngineConfigAction_install_confignonrc part is what is in the background before the
Cannot find service {0}. Parameter name: SQLWriter pops up.
And in Event Viewer:
Log Name: Application
Source: Microsoft-Windows-RestartManager
Date: 10/7/2014 1:11:48 PM
Event ID: 10010
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer:
Description:
Application 'C:\31f53f2e988a36f2c31e\x64\setup100.exe' (pid 688) cannot be restarted - Application SID does not match Conductor SID..
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RestartManager" Guid="{0888E5EF-9B98-4695-979D-E92CE4247224}" />
<EventID>10010</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-10-07T20:11:48.532980400Z" />
<EventRecordID>4538</EventRecordID>
<Correlation />
<Execution ProcessID="732" ThreadID="2548" />
<Channel>Application</Channel>
<Computer></Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<RmUnsupportedRestartEvent xmlns="http://www.microsoft.com/2005/08/Windows/Reliability/RestartManager/">
<RmSessionId>0</RmSessionId>
<Pid>688</Pid>
<FullPath>C:\31f53f2e988a36f2c31e\x64\setup100.exe</FullPath>
<DisplayName>Managed SQL Server Installer</DisplayName>
<AppVersion>0</AppVersion>
<AppType>5</AppType>
<TSSessionId>2</TSSessionId>
<Status>67108865</Status>
<Reason>1</Reason>
</RmUnsupportedRestartEvent>
</UserData>
</Event>
Found one article saying you can get this if previous version not fully removed, and to do a repair of the previous version, but as I said I uninstalled it and followed all steps for cleanup, so nothing to repair.Here is the ERRORLOG file from C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log. At the bottom I am seeing the error you said before was a SAN issue. I had hoped that issue was only with
SQL 2012, but it appears it is even with 2008?
If that is still the issue, I'm trying to understand if by the articles, if the SAN conflict is an OS issue or an SQL issue? In other words, is it because the OS is Server 2012? Or would this still occur if I install SQL
2008 on Server 2008 R2? I don't know that they will be willing to upgrade the SAN, and I don't really want to fool with a .VHD (virtual disk) as a workaround speaks of.
If you're asking if I did this from your article: select startup account for Database Engine services as NT Authority\SYSTEM
, I don't recall what I did this last time. I was doing that the last few days, but I think I didn't switch it to that once, just to see if I would have success. I don't know if that was this last time or not when I switched it.
Is there anywhere I can check that after the fact?
014-10-08 12:53:09.84 Server Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-10-08 12:53:09.84 Server (c) Microsoft Corporation.
2014-10-08 12:53:09.84 Server All rights reserved.
2014-10-08 12:53:09.84 Server Server process ID is 2640.
2014-10-08 12:53:09.84 Server System Manufacturer: 'IBM', System Model: 'IBM System x -[7870AC1]-'.
2014-10-08 12:53:09.84 Server Authentication mode is WINDOWS-ONLY.
2014-10-08 12:53:09.84 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-10-08 12:53:09.84 Server This instance of SQL Server last reported using a process ID of 2848 at 10/8/2014 10:56:44 AM (local) 10/8/2014 5:56:44 PM (UTC). This is an informational message only; no user action is required.
2014-10-08 12:53:09.84 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-10-08 12:53:09.84 Server Command Line Startup Parameters:
-m SqlSetup
-f
-Q
-q SQL_Latin1_General_CP1_CI_AS
-T 4022
-T 4010
-T 3659
-T 3610
-T 902
-d c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf
-l c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf
2014-10-08 12:53:09.86 Server Warning: The server instance was started using minimal configuration startup option (-f). Starting an instance of SQL Server with minimal configuration places the server in single-user mode automatically.
After the server has been started with minimal configuration, you should change the appropriate server option value or values, stop, and then restart the server.
2014-10-08 12:53:09.86 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-10-08 12:53:09.86 Server Detected 16 CPUs. This is an informational message; no user action is required.
2014-10-08 12:53:10.00 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-10-08 12:53:10.01 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-10-08 12:53:10.01 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2014-10-08 12:53:10.03 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-10-08 12:53:10.05 Server Support for distributed transactions was not enabled for this instance of the Database Engine because it was started using the minimal configuration option. This is an informational message only. No
user action is required.
2014-10-08 12:53:10.06 spid7s Warning ******************
2014-10-08 12:53:10.06 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-10-08 12:53:10.06 spid7s Starting up database 'master'.
2014-10-08 12:53:10.08 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.08 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\master.mdf' because it was originally formatted with sector size 4096 and is now on a volume with sector
size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size.
2014-10-08 12:53:10.09 spid7s Error: 5178, Severity: 16, State: 1.
2014-10-08 12:53:10.09 spid7s Cannot use file 'c:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Template Data\mastlog.ldf' because it was originally formatted with sector size 4096 and is now on a volume with
sector size 2097152. Move the file to a volume with a sector size that is the same as or smaller than the original sector size. -
SQL Express 2008 R2 Error:15209 - An error occurred during encryption
I am trying to install SQL Server Express 2008 R2 but it keeps failing .
The computer is Windows 7 x64, all the latest service packs and updates installed.
The application is by Greatland, called Yearli (formerly called WinFiler).
Last year’s WinFiler, which was installed on this PC, used SQL 2008 Express (x86).
This year’s version is using R2 and attempted to install a new database.
I have since uninstalled last year’s database.
When I run the Yearli install, it first attempts to install SQL Express 2008 R2, but the install fails with this error at the end of ERRORLOG:
Error: 15209, Severity: 16, State: 1. "An error occurred during encryption."
I have been researching this for days. What I have done so far, based on MSKB and other user posts, is the following:
Changed the account for the SQL service from Local System to NETWORK SERVICE.
Add NETWORK SERVICE to the “Protect” folder with Full permission added.
Neither of these have worked. SQL appears to be installed, but the service will not start.
In the Windows System log I get this message:
The SQL Server (WFP_SS8E) service terminated with service-specific error The specified resource name cannot be found in the image file..
In the Windows Application log I get this message:
FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error,
and retry the operation.
The App log error is interesting because there is no E: drive on the system.
SFC /Scannow came up clean.
I don’t have any other ideas, so if anyone else does, I’d appreciate it.SQL appears to be installed, but the service will not start.
In the Windows System log I get this message:
The SQL Server (WFP_SS8E) service terminated with service-specific error The specified resource name cannot be found in the image file..
In the Windows Application log I get this message:
FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql10_main_t.obj.x86fre\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'. Diagnose and correct the operating system error,
and retry the operation.
Hi dfosbenner,
According to your description, SQL Server fails to start and you get the error message (Operating system error 2……) in Windows Application log. To work around this issue, you might have to change the path of the files by running the following scripts from
the command prompt. The example is to put MSDB files in C drive, you can change the path of the files to other drives.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE msdb MODIFY FILE ( NAME = MSDBData, FILENAME = 'C:\MSDBData.mdf');
ALTER DATABASE msdb MODIFY FILE ( NAME = MSDBLog, FILENAME = 'C:\MSDBLog.ldf');
go
exit;
NET STOP MSSQL$SQLEXPRESS
For more details, please review the following thread.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/54bbcac3-41c5-4a5d-a4f6-2669e538dc82/sqlserver-2008-express-install-error?forum=sqlexpress
Thanks,
Lydia Zhang -
SQL Express 2008 R2 will not start on Windows 7 Home
Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed. Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
no avail. Here is my log file.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2014-06-14 08:45:18.18 Server Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
Jun 17 2011 00:54:03
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 08:45:18.18 Server (c) Microsoft Corporation.
2014-06-14 08:45:18.18 Server All rights reserved.
2014-06-14 08:45:18.18 Server Server process ID is 8924.
2014-06-14 08:45:18.18 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 08:45:18.18 Server Authentication mode is MIXED.
2014-06-14 08:45:18.18 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 08:45:18.18 Server This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 08:45:18.18 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 08:45:18.18 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 08:45:18.18 Server Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 08:45:18.21 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 08:45:18.23 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 08:45:18.25 spid7s Starting up database 'master'.
2014-06-14 08:45:18.28 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 08:45:18.29 spid7s SQL Trace ID 1 was started by login "sa".
2014-06-14 08:45:18.29 spid7s Starting up database 'mssqlsystemresource'.
2014-06-14 08:45:18.30 spid7s The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid7s Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 08:45:18.32 spid10s Starting up database 'model'.
2014-06-14 08:45:18.32 spid7s Informational: No full-text supported languages found.
2014-06-14 08:45:18.32 spid7s Starting up database 'msdb'.
2014-06-14 08:45:18.33 Server Error: 17190, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 08:45:18.33 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 08:45:18.33 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 08:45:18.33 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 08:45:18.33 Server Error: 17826, Severity: 18, State: 3.
2014-06-14 08:45:18.33 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 08:45:18.33 Server Error: 17120, Severity: 16, State: 1.
2014-06-14 08:45:18.33 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-=-=-=-=-=-=-=-=-=-=
I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin. My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online. Since this
is Express, there is limited capabilities with the config tool.
I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
"Cannot Find Object or Property. [0x80042004]
SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
A check of the net user shows only the Administrator, Guest and my local login in Admin Account. net localgroups show these items.
*Administrators
*Distributed COM Users
*Event Log Readers
*Guests
*HomeUsers
*IIS_IUSRS
*IIS_WPG
*Performance Log Users
*Performance Monitor Users
*SQLServer2005SQLBrowserUser$MARTINDAHL-PC
*SQLServerFDHostUser$MartinDahl-PC$ACT7
*SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
*SQLServerMSSQLUser$MartinDahl-PC$ACT7
*SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
*Users
The command completed successfully.
I checked the SSL and Force Encryption is set to no and the certificates have been cleared.
I am not sure how to solve this problem. Please help. Thanks, in advance.I created a new Administrator account on the machine, mdahl. I then started the SQL Configuration Tool and changed the log on to this new account. Same problem. Here is the SQL Log.
2014-06-14 11:24:15.83 Server Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
Jun 17 2011 00:54:03
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-06-14 11:24:15.83 Server (c) Microsoft Corporation.
2014-06-14 11:24:15.83 Server All rights reserved.
2014-06-14 11:24:15.83 Server Server process ID is 11448.
2014-06-14 11:24:15.83 Server System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
2014-06-14 11:24:15.83 Server Authentication mode is MIXED.
2014-06-14 11:24:15.83 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
2014-06-14 11:24:15.83 Server This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
2014-06-14 11:24:15.83 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
2014-06-14 11:24:15.83 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-06-14 11:24:15.83 Server Detected 8 CPUs. This is an informational message; no user action is required.
2014-06-14 11:24:15.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-06-14 11:24:15.88 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2014-06-14 11:24:15.90 spid7s Starting up database 'master'.
2014-06-14 11:24:15.91 spid7s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.91 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-06-14 11:24:15.92 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
2014-06-14 11:24:15.93 spid7s SQL Trace ID 1 was started by login "sa".
2014-06-14 11:24:15.93 spid7s Starting up database 'mssqlsystemresource'.
2014-06-14 11:24:15.93 spid7s The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid7s Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
2014-06-14 11:24:16.03 spid10s Starting up database 'model'.
2014-06-14 11:24:16.03 spid7s Informational: No full-text supported languages found.
2014-06-14 11:24:16.03 spid7s Starting up database 'msdb'.
2014-06-14 11:24:16.03 Server Error: 17190, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
2014-06-14 11:24:16.03 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-06-14 11:24:16.03 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-06-14 11:24:16.03 Server Error: 17182, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-06-14 11:24:16.03 Server Error: 17826, Severity: 18, State: 3.
2014-06-14 11:24:16.03 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-06-14 11:24:16.03 Server Error: 17120, Severity: 16, State: 1.
2014-06-14 11:24:16.03 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Also, the link you provided is to Windows Vista, not Windows 7 Home Premium. However, I did look at the registry setting they said to look at in the link.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
folder of the user account that is experiencing the problem.
Exit Registry Editor.
Looking into my registry for my ProfilesList as mentioned. I have these items.
S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either. Still looking for assistance. Still not starting. -
SQL Express 2008 to 2012 express upgrade not working
I'm trying to upgrade an older version of SQL Express 2008 to 2012 by first upgrading to (what I think is) 2008 SP3 (10.0.5500.0).
The upgrade to 2008 SP3 says it has completed and the version of the browser and client etc are showing as 10.3.5500.0 but the SQL Server version is still showing as 10.0.2531.0 in the errorlog. When I run the 2012 install exe (11.0.2100.60) it is failing
on "SQL Server 2008 Service Pack 2 or later is required"
I'm not very experienced when it comes to SQL so any help would be appreciated.You are probably using a regular version of SP3 to upgrade. Express edition has a separate download which included service packs.
Please download the appropriate package from this link, provide the same instance name which you want to upgrade (as if you were to install a new instance with that name) and setup will run in upgrade mode". It will apply SP3 on existing express instance.
http://www.microsoft.com/en-in/download/details.aspx?id=27597
Let me know if you need help selecting the right exe from the above link.
HTH
This posting is provided “AS IS” with no warranties, and confers no rights.
If this reply answers your question, please mark it as Answered for others to find it easily.
If this reply help you resolving the problem, please vote the post as Helpful. -
Problem accessing SQL Express 2008 R2 after VS package install
I've written an application package in Visual Studio 2010 which requires SQL Express 2008 R2. I've also created a separate setup package and set SQL Express as a prerequisite. Everything runs as expected except that after the install on target machine
I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script. This happens on WIN 7 and up. I know it is a permissions issue with the default install of SQL but do not know how to otherwise perform the install and make
it work. Looking for someone to walk me through and resolve this issue.Hi Zanith,
Actually this forum is to discuss the VS IDE issue.
>> Everything runs as expected except that after the install on target machine I do not have adequate permissions in SQL to attach the database or set up the user via SQLCMD script
Based on your description, the important issue would be related to the permission, as my understanding, it would be related to the SQL Server setup or configuration.
So my suggestion is that you’d better post this issue to the SQL Server forum.
https://social.technet.microsoft.com/Forums/en-US/home?forum=sqlgetstarted
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlexpress
I also found two cases about the SQL Server permission issue.
Reference:
http://stackoverflow.com/questions/9185142/sql-server-2008-r2-express-permissions-cannot-create-database-or-modify-users
http://serverfault.com/questions/53645/don-t-have-permission-to-access-sql-server-express-2008
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2
The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 ConsultingHi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo -
We are using SQL server Express 2008 R2 SP2 With Advanced Services.Its a 64 bit server.We want to Patch Service Pack 3 On express edition. Could you please
tell us whether the Service Pack 3 will install on SQL Express 2008 R2 SP2 With Advanced Services or not
Could you please suggest me on this.
Sainath KompellyNo, you cannot install SP3 on Express edition as Microsoft did not release it for Express Edition as noted here: http://blogs.msdn.com/b/sqlreleaseservices/archive/2014/09/26/sql-server-2008-r2-service-pack-3-has-released.aspx.
You can see that Express edition is missing from the list of supported editions in the details section here: http://www.microsoft.com/en-us/download/details.aspx?id=44271
Satish Kartan www.sqlfood.com
Maybe you are looking for
-
New iPod user - Frustration with Connection to PC
I finally jumped on this bandwagon and bought an iPod 30GB with video, etc. But am having a couple issues. Any help is appreciated. I installed the latest iTunes software from the Apple site, ripped a few of my CD's, and had them transferred to my iP
-
Tabular form (select list Query based LOV)
Hi all, I have this situation: a tabular form with two "select list (query based LOV)" fields. The first one must affect elements in the second one. And so the second query based LOV field should has a "where attr1 = first_list_selected_value" in the
-
ALE error "Too many recipients "
Hi all , please help me to solve this issue !!!!!!!! i done with ale settings . in the bd64 , orders message type is used in 2 different model view for 2 different systems when i create po it is giving error in output "Too many recipients found for m
-
Sound cutting out/crackling/pops in Windows 7 XFi XtremeGamer
System specs: Windows 7 Ultimate fully updated Q6600 @ 3.0ghz Asus P5N32-E Sli Motherboard (680i Chipset) 80 bios revision w/ nVidia 5.5 nforce drivers 2x2 Gigs Corsair ?DDR2 800 @ In dual channel mode BFG 285-GTX w/ 96.2 drivers X-Fi XtremeGamer w/
-
Workflow capabilities for a loans project
I have installed the workflow 9i 2.6 server(standalone). There is also a oracle9iAS installed in another m/c with 1> infrastructure and 2> j2ee and Web Cache Pls let me know if below activities can be performed using the workflow and what is the proc