SQL loader for empty field at the end of the line

Hi,
I have following data file for sql loader. I am using Oracle 11.2. The table structure is table_a(id number, name varchar2(32), nbr number).
1, zzzz, 123
2, bbb,
3, ccc, 33
4, ddd,
Currently, I am using "TERMINATED BY ',' " in the control file for SQL loader. However row2 and row4 were thrown into the bad file. Any suggestion for me to load row2 and row4 into the table as well?
Thanks,

Two of three columns in your table are named with reserved words.
My first suggestion is to run this query:
SELECT keyword
FROM v$reserved_words
ORDER BY 1;My second suggestion is that your read the FAQ and learn how to use tags to post listings to these forums so we can read what you post.
My third suggestion is that you go to my SQL*Loader Demos page of my website:
http://www.morganslibrary.org/reference/sqlloader.html
and look up "TRAILING NULLCOLS."

Similar Messages

SQL Loader - Set a field to a CONSTANT and the data is date

Hi.
I have a question on SQL Loader.
I want to load a field(field name is TIME_IN).
In the Oracle table, this field type is DATE.
I my csv file, I do not put any value for this field.
I intend to use CONSTANT variable to this field.
In my control file, following is the command for above field.
Hoever, when I run the SQLLoader, it will return me error message which is INVALID MONTH.
I hope somebody can help and advise me on this matter.
Thanks.
INTO TABLE eqreceival_temp
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"'
EQ_NO,
SIZE_TYPE,
CUSTOMER,
CONSTRUCTION,
QUALITY,
CONDITION,
DATE_IN DATE "DD/MM/YYYY",
TIME_IN CONSTANT '01/01/1999',
PARK_LOC CONSTANT 'CP',
STOCK CONSTANT 'S',
DISCHARGE_PORT CONSTANT 'MYPEN',
CTYPE CONSTANT 'P',
ROAD CONSTANT 'Y',
GATE CONSTANT 'Y',
SHIPMENT CONSTANT 'Y'
)

use to_data function when u r inserting....
or
give simply SYSDATE --- AND FIRST CHECK
--YOU MAY REMOVE CONSTANT KEY WORD.

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted

I have a new computer running os10.9. my old computer ran cs5.5(upgrade version). I am trying to get CS5.5onto my new computer. when i load cs5.5 towards the end of the install it asks for the cs5.5 serial number. i put that in and everything is accepted but then it asks for a serial number for a full version of a product which men is design premium cs3 but it doesn't give me that product as a choice from the drop down menu. it only gives me adobe master collection cs3. why when i have purchased all these different upgrades can i now not use them and how can i sort this out. i need cs5.5 on my new computer.

Contact Adobe support:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

After typing web address in address bar i can no longer just press enter for the web page to load, I have to use the mouse to select the arrow at the end of the address bar

I downloaded the most recent version of firefox and since then when I type a web address into the address bar, I can no longer just press enter to get to the website I want, Instead, I have to use the mouse to point to the arrow at the end of the address bar and click on it.
Driving me nuts! Never had this before!

Success! I disabled the AVG search and now I can press enter to get to a web page! Thanks for the quick response!

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Empty lines at the end of the payload generated in FTP server

Hi All,
I am facing an issue in one of the use cases that I am trying to implement.
I am getting a purchase order from one of the trading partners through Oracle B2B.
B2B forwards this B2BM (B2B message ) to AIAB2BInterface. From AIAB2BInterface my BPEL process gets invoked, which in turn invokes the AdapterComposite which has a FTP adapter that writes the purchase order to a FTP server. PFB the end to end flow.
PurchaseOrder from ABC trading pertner--> Oracle B2B --> AIAB2BInterface --> TestInputProvABCS --> TestInputAdapter -> Host trading partner picks up the file from FTP location
In the ProvABCS I retrieve the actual payload from the B2BM and convert it into a string using ora:getContentasString. I am then invoking the adapter composite and sending the string as the input to FTP adapter. At the adapter composite I use a simple native schema (for validation of the input string) which has only one element PO_Info of the type string. But when the file gets generated in the FTP server there are empty lines and junk characters at the end of the file.
Need some advice on this. Why are the empty lines coming in the end of the file? Please help!
Thanks

OK, I cannot figure out a way to modify the JTable (in an extended class) directly.
So, what I did was to add a wrapper around the TreeTableModel which shows an empty row at the end.
For those of you who are in a similar situation, the methods that I had to modify are
public boolean isCellEditable(Object node, int column);
public int getIndexOfChild(Object parent, Object child);
public int getChildCount(Object node);
public Object getChild(Object node, int i);
These other methods are required if you are using a TreeTable instead of just a table (see http://java.sun.com/products/jfc/tsc/articles/treetable2/index.html)
public Object getValueAt(Object node, int row, int column);
public Object getValueAt(Object node, int row, String columnName);
public void setValueAt(Object node, int row, int column, Object newValue);
public void setValueAt(Object node, int row, String columnName, Object newValue);
The signature of above methods is slightly different than the ones at: http://java.sun.com/products/jfc/tsc/articles/treetable2/src/TreeTableModel.java
This is due to the fact that, if you want to display the serial no. (as in row number), then getValue() can just return the row number. IndexedTreeTableModel is another wrapper around the TreeTableModel which can add an extra column to display the serial number.

How can I make a fade out effect at the end of the song in garageband for iPad?

I want to made this effect but honestly I have no idea about what I have to do. u.u Please help.

ClaudioWalrus wrote:
How can I make a fade out effect at the end of the song in garageband for iPad?
GB for iPad doesn't have volume automation, you'd need to import the project into GB on a Mac to create the fade with a volume curve.
as an alt, finish your song and export the audio file, then import the audio file in an audio editor and create a volume fade with that:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
(Let the page FULLY load. The link to your answer is at the top of your screen)

Finding the empty field in table control of the infotype 8

Hi to all experts,
MY requirement is to populate a wage type and its value for infotype 8 after some calculations . i have to append the values to the list box of basic pay at the last . but im facing problem how to determine dynamically which row will be empty and append it to that row. I have written this code ........... unable to proceed forward.
data: val type i.
   DO 40 TIMES VARYING <fs_wages>-lgart FROM i0008-lga01 NEXT i0008-lga02
                     VARYING <fs_wages>-betrg FROM i0008-bet01 NEXT i0008-bet02.
   IF <fs_wages>-lgart IS INITIAL.
     CONCATENATE '0' sy-index INTO val.
     i0008-lga04 = '2108'.
     i0008-bet04 = w_tot.
   ENDIF.

>
mohammed abdul hai wrote:
> Hi to all experts,
> MY requirement is to populate a wage type and its value for infotype 8 after some calculations . i have to append the values to the list box of basic pay at the last . but im facing problem how to determine dynamically which row will be empty and append it to that row. I have written this code ........... unable to proceed forward.
>
>
data: val type i.
>
>    DO 40 TIMES VARYING <fs_wages>-lgart FROM i0008-lga01 NEXT i0008-lga02
>                      VARYING <fs_wages>-betrg FROM i0008-bet01 NEXT i0008-bet02.
>
>    IF <fs_wages>-lgart IS INITIAL.
>      CONCATENATE '0' sy-index INTO val.
>      i0008-lga04 = '2108'.
>      i0008-bet04 = w_tot.
>    ENDIF.
    IF <fs_wages>-lgart IS INITIAL.
*      CONCATENATE '0' sy-index INTO val.
      <fs_wages>-lgart = '2108'.
      <fs_wages>-betrg = w_tot.
    ENDIF.
At the enddo statement, these values will be written back, see online help:
If the processing block is not exited within the loop, the content of the variable dobj at the end of the loop run is assigned to the previously assigned data object dobj1 or dobj2 without conversion.

Using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part I get no indication on ipod of download

When using Overdrive Media to down load a book from the library it starts ok but stops near the end of the first part. I get no indication on the ipod of the book downloading. Is this a operating error or posable failure of the I pod.?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

TS1538 Last night iTunes on my PC tried to run an update. Prior to the update, it was working perfectly. At the end of the update I got an error message R6034, an application has made an attempt to load the C runtime Library incorrectly. Any suggestions

Last night iTunes on my PC tried to run an update. Prior to the update, it was working perfectly. At the end of the update I got an error message R6034, an application has made an attempt to load the C runtime Library incorrectly. Any suggestions? I have also gotten a message that iTunes is not installed correctly, to reinstall. Reinstalling give the the same two errors over and over. Restarting my computer does nt help.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How to Load Next Data to LongListSelector when Scrolling reaches at the end of the LongListSelector

I need to call a function LoadNextData() on reaching at the end of the LongListSelector . I tried to Implement using the msdn twitter sample(https://code.msdn.microsoft.com/windowsapps/TwitterSearch-Windows-b7fc4e5e) with Incremental Loading but it uses
ItemRealized and ItemUnRealized events. But when i used these events , they fires only when an item is added or removed from list what should i do? Is there any alternative ? When i Scroll to the bottom these events are not fired . Is there any
way to solve this?

Hi Joel,
Based on my knowledge, the sample uses the ItemRealized event handler to check if the app need load more data.
if ((e.Container.Content as TwitterSearchResult).Equals(resultListBox.ItemsSource[resultListBox.ItemsSource.Count - _offsetKnob]))
Debug.WriteLine("Searching for {0}", _pageNumber);
_viewModel.LoadPage(_searchTerm, _pageNumber++);
The above code snippet ask for more if the app trigger certain conditions. I’ve tested the code sample you provided. It worked. If you still cannot make it working, please post more information for reproduction.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

Is there a way to link text fields, so when you reach the end of one line it moves to the next?

I often use Acrobat Pro to create forms, whether it be from an existing document or from scratch, and this has always irritated me. I know you can create a text field and select the Multi-line option; however, this is not what I am looking to do. I have a form that has a Yes or No Radio Button, then below it says "If yes, please explain:" followed by 3 lines to respond. When I run it through the Form Creator, it places three text fields on the response lines - as it should. The first line is shorter because of the text, which is why I cannot use the Multi-line option. So is there a way to link these three text fields, so that when I reach the end of the first line it stops and automatically moves to the next?
Here is a picture of what I am looking at:

These types of lines are a left-over from printed forms. There's no reason
to keep using them if your form is digital.
The best approach is to combine the fields to a single multiline field, and
get rid of the first line. Trying to link text fields together is very
tricky. I haven't yet to see it done properly.

I keep track of family totals for fundraising at a school, I want a family name and totals for each fundraiser and then at the end of the year I would like an alphabetized list. Can I do this in numbers?

in numbers, how would I make a line for each family (100+) a column for each fundraiser. and at mid year, and year end be able to print an alphabetical listing?
example:     entertainment books          Chip Shoppe       Yankee Candle
Smith          $350                                   $245                    $100
Total at the end of the line, but I could live without. I am just trying to lose the paperwork, and have it in the ipad for when parents approach me at meetings.
Help!

HI m,
Using Numbers '09 (the Mac version), I'd use a table with one header row and two header columns.
Family     Total     Ent.Books     Chip S.     Y. Candle
Smith, J      $695        350            245             100
Jones, T      $765        250            445               70
An ascending sort on column A will put the families in alphabetical order (and carry the rest of the row along with them).
The formula =SUM(2) in B2, and filled down from there, keeps the total for each family right beside the family name.
You could add a Footer row at the bottom to keep totals for each column. Formula for column B: =SUM(B)
I would leave the currency signs ($) off the amounts—they just clutter up the table.
This assumes that the features listed are all supported on Numbers for iOS, the version running on your iPad.
Regards,
Barry

A family member gave our kids their old iphone with music already loaded for them. How do we add the music to our library? It won't transfer purchases from the phone and if I sync it, the music is erased. Can someone walk me through this?

A family member gave our kids their old iphone with music already loaded for them. How do we add the music to our library? It won't transfer purchases from the phone and if I sync it, the music is erased. Can someone walk me through this?

No one here will help you violate iTunes terms of service or steal music.

SQL loader for empty field at the end of the line

Similar Messages

Maybe you are looking for