SQL Query - The number of columns specified in "SQL Query" does not match t

I am creating new UDM for tablespace alert, below is my query,however its failing with error
SQL Query - The number of columns specified in "SQL Query" does not match the value specified in "SQL Query Output"
I selected Metric type is number
SQL Query Format : Two columns
Query:
SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2)
used_pct FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
Any clues why i am getting error.

SQL> SELECT d.tablespace_name,round(((a.bytes - NVL(f.bytes,0))*100/a.maxbytes),2) used_pct
2 FROM sys.dba_tablespaces d,(select tablespace_name, sum(bytes) bytes, sum(greatest(maxbytes,bytes)) maxbytes from sys.dba_data_files group by tablespace_name) a,(select tablespace_name, sum(bytes) bytes from sys.dba_free_space group by tablespace_name) f
3 WHERE d.tablespace_name = a.tablespace_name(+) AND d.tablespace_name = f.tablespace_name(+)
4 AND NOT (d.extent_management = 'LOCAL' AND d.contents = 'TEMPORARY');
TABLESPACE_NAME USED_PCT
MGMT_TABLESPACE .82
SYSAUX 1.52
UNDOTBS1 .32
RMAN .02
CORRUPT_TS 10.63
USERS 0
SYSTEM 2.26
MGMT_ECM_DEPOT_TS .04
MGMT_AD4J_TS 0

Similar Messages

]The server name server_migration_2 specified with -Dweblogic.Name does not

Hi!
I followed the following steps to configure a clustered environment with two machines:
- installation of Oracle WebLogic Server 11g (10.3.3) in machine A and B
- creation of a domain using configuration wizard (in machine A)
- distributed domain using pack (machine A) and unpack (machine B)
- startup of node manager in both machines (both reachable)
- creation of a Managed Server 1 in machine A
- creation of a Managed Server 2 in machine B
- startup of the Managed Server 1 in machine A (it works fine)
- startup of the Managed Server 2 in machine B , it fails with the following error:
<Nov 30, 2010 12:39:28 PM WET> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name server_migration_2 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Nov 30, 2010 12:39:28 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
The config.xml file located at ../user_projects/domains/mydomain/config/ in Machine 1 has the full environment setup, however the same file on machine 2 only has admin server configuration.
Why it happens? These two files must be synchronized? The config.xml in the Machine 2 is used by who? Admin server uses this file?
Thanks a lot
A.

If your newly created managed server is on a 3rd machine you will still need to 'pack/unpack', to transport the configuration files to the new machine.
If your 3rd managed server share domain_home with an already existing managed server you wont need to do this. In this case when a new managed server is created in the admin console, the admin server will propogate the change to the existing managed server which will update its configuration files in its local domain_home. The new server when starting will pick up this updated details from the shared location and will be able to start.
You were doing the pack after creating admin server alone. So the config files transported to remote machine has only details of Admin Server and using that you were trying to start the managed server, where i it clearly failed saying that it can't find that managed server name in its configuration.
If you have adavance knowledge of how many managed servers you need to create , at the time of domain creation, the right way is to configure all the man servers in the domain configuration wizard and then use pack/unpack to distribute the configuration files to each of the remote machine where the managed servers run.
Hope it makes sense.

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

HT1535 The music I have in my i touch does not match or sync with music on my Mac. What is the best way for me to sync both devices without losing any music?

The muisc I have in my i-Touch does not match up with the music list in my Mac, therefore have issues syncing. Is there anyway to keep all those songs without losing some of it?

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

The local node entry in Cluster Configuration information does not match wi

In installing 10.1.0.3 CRS on Solaris 8 x86, I keep getting the error, "The local node entry in Cluster Configuration information does not match with the entry in /etc file." Both addresses are defined in the /etc/inet/hosts and are pingable. There seems to be no way to get past this issue. Earlier I installed 10.2.0.1 CRS on SLES9 SP2 on a system with the same network settings and had no problem. Is there some way to force the installer to accept the addresses given and proceed past this step?

All,
I think there can be two problems
1.
if your host file looks as follows
# Public
192.168.2.x rac1.localdomain rac1
192.168.2.x rac2.localdomain rac2
#Private
192.168.0.x rac1-priv.localdomain rac1-priv
192.168.0.x rac2-priv.localdomain rac2-priv
#Virtual
192.168.2.x rac1-vip.localdomain rac1-vip
192.168.2.x rac2-vip.localdomain rac2-vip
then you should be able to do rsh or ssh sucessfully for each aliases at least one from each nodes
(ex)
on node rac1
ssh rac1 date
ssh rac1.localdomain date
ssh rac2 date
ssh rac2.localdomain date
2. you should create user equivalance on all the nodes as follows
Edit the /etc/hosts.equiv file to include all the RAC nodes:
+rac1 oracle
+rac2 oracle
+rac1-priv oracle
+rac2-priv oracle

The free space for my iphone on itunes does not match the free space on my iphone after syncing.

The free space for my iphone on itunes does not match the free space on my iphone after syncing. iTunes shows 6.7 G free, but my iphone shows 6 G free. Why such a delta?

They've never sussed this out - been a problem the last year or two for me regardless of all the new iOS versions and iTunes versions. Regardless of multiple resets and full restores. Mine showed 3.7 avail on computer, less than .5 on phone. I did a reset and full restore. It helped - but still differs dramatically - now showing 5.8 avail on computer but only 2.9 on phone.
APPLE!!! I have spent 10s of thousands on your products both at my business and home - why? "Because it just works" I've been telling people. Not sure if I can keep on saying that if you don't get this figured out!!

There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement.

I have been looking at my code for hours now and cant figure out what is wrong. The error has kept popping up even when i thought i had fixed everything. maybe a second set of eyes could help me out here. If you could help me out it would be much appreciated.
USE [ConorsSetKits]
GO
CREATE TABLE Customers (
CustomerID Int NOT NULL IDENTITY(1000,1),
LastName NChar(30) NOT NULL,
FirstName NChar(30) NOT NULL,
Address NChar(50) NOT NULL,
City NChar(30) NOT NULL,
State NChar(2) NOT NULL,
Zip Numeric(5) NOT NULL,
Email NVarChar(50) NOT NULL,
DateOfBirth Numeric (4) NOT NULL,
CONSTRAINT CustomersPK PRIMARY KEY(CustomerID),
CONSTRAINT ValidZip
CHECK ( [Zip] LIKE '[0-9][0-9][0-9][0-9][0-9]' ),
CONSTRAINT ValidState
CHECK( LEN([State]) = 2),
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
CREATE TABLE Sets (
SetID Int NOT NULL IDENTITY(1000,1) Primary Key,
SetName NChar(20) NOT NULL,
SetType NChar (20) NOT NULL,
Price Numeric (20) NOT NULL,
Quantity Numeric (50) NOT NULL,
CONSTRAINT SetTypeCheck
CHECK (SetType IN ('Planes','Tanks','Robots','Cars','Helicopters','Boats','Trains','Motorcycles','Jets')),
CONSTRAINT ValidQuantity
CHECK (Quantity >= 0)
CREATE TABLE Orders (
OrderID Int NOT NULL IDENTITY(1000,1),
CustomerID Int NOT NULL,
OrderDate Date NOT NULL,
CONSTRAINT CAIntPK PRIMARY KEY(OrderID, CustomerID),
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders OFF
SET IDENTITY_INSERT dbo.CUSTOMER ON
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1000, 'Janes', 'Jeffrey', '123 W. Elm St', 'Renton', 'WA', '98055',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1001, 'Smith', 'David', '813 Tumbleweed Lane', 'Loveland', 'CO', '81201',
'[email protected]',1992);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1015, 'Twilight', 'Tiffany', '88 1st Avenue', 'Langley', 'WA', '98260',
'[email protected]',1972);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1033, 'Smathers', 'Fred', '10899 88th Ave', 'Bainbridge Island', 'WA', '98110',
'[email protected]',1980);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1034, 'Frederickson', 'Mary Beth', '25 South Lafayette', 'Denver', 'CO', '80201',
'[email protected]',1970);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1036, 'Warning', 'Selma', '205 Burnaby', 'Vancouver', 'BC', '80201',
'[email protected]',1981);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1037, 'Wu', 'Susan', '105 Locust Ave', 'Atlanta', 'GA', '30322',
'404', '653-3465', '[email protected]',1971);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1040, 'Gray', 'Donald','55 Bodega Ave', 'Bodega Bay', 'CA', '94923',
'[email protected]',1985);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1041, 'Johnson', 'Lynda', '117 C Street', 'Washington', 'DC', '20003',
'[email protected]',1969);
INSERT INTO Customers
(CustomerID, LastName, FirstName, Address, City, State, Zip,
Email, DateOfBirth)
VALUES (
1051, 'Wilkens', 'Chris', '87 Highland Drive', 'Olympia', 'WA', '98508',
'[email protected]',1994);
SET IDENTITY_INSERT dbo.CUSTOMER OFF
SET IDENTITY_INSERT dbo.Sets ON
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1000, 'MysterySet1','Planes',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1001, 'MysterySet2','Planes',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1002, 'MysterySet4','Tanks',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1003, 'MysterySet3','Robots',$19.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1004, 'MysterySet5','Cars',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1005, 'MysterySet6','Boats',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1006, 'MysterySet7','Trains',$39.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1007, 'MysterySet8','Motorcycles',$9.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1008, 'MysterySet9','Helicopters',$29.99,10);
INSERT INTO Sets
(SetID, SetName, SetType, Price, Quanity)
VALUES (
1009, 'MysterySet10','Jets',$29.99,10);
SET IDENTITY_INSERT dbo.Sets OFF
SET IDENTITY_INSERT dbo.Orders ON
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2012-12-12');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1000, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1005, '2013-08-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-12-30');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2013-08-31');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1004, '2014-03-25');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1002, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2012-11-14');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1001, '2013-01-05');
INSERT INTO Orders
(OrderID, OrderDate)
VALUES
(1006, '2012-06-22');
SET IDENTITY_INSERT dbo.Orders OFF

Price Numeric (20) NOT NULL,
I do not think you understand this datatype? Go look at the values you are attempting to insert into this column. For example, "$29.99". After the insert, what value is actually stored in that column?
DateOfBirth Numeric (4) NOT NULL,
No. Just No. Either change the column name to faithfully represent what values you intend to store (and apply the appropriate constraints) or change the datatype and the values that you intend to store to match the column name. And the constraint
that you do have:
CONSTRAINT DateOfBirth
CHECK ([DateOfBirth] BETWEEN '1920-01-01' AND getdate() - 5844));
is both logically suspect and syntactically wrong. First, the upper boundary will be computed as 1999-04-29 15:50:21.670. But, of course, your column is a whole number of no more than 4 digits. The same issue applies to your lower boundary.
A simple select statement will show you those errors
select cast('1920-01-01' as numeric(4)), getdate() - 5844, cast(getdate() - 5844 as numeric(4));
An insert statement fails with the same error. Because, of course, your boundary values must actually be converted to numeric(4) in order to compare them against the value contained in the column. Generally, you can convert from
string to numeric - IF the content of the string actually contains a value that is numeric and can be converted into the specific type needed. Not so in this case. Is this 16 year period (5844 days) significant for some reason? You should
document it here in your DDL with a comment, because it is unlikely to be documented (and kept current) anywhere else.
And lastly, your script has:
SET IDENTITY_INSERT dbo.CUSTOMER OFF
That is not the name of your table, and therefore that statement also fails. The table name you used is plural.

THe sync key supplied to me by firefox does not match account when I tried to reload firefox.

I needed to reload my firefox browser. I was using sync before and I wanted to use it to reload my bookmarks ...etc... I loaded the add-on, ran setup, entered my account name and password, set up then requested sync key. I saved the html when i recieved origional key. sync setup tells me it is wrong key... i can change sync key but I lose all info in my account.. what to do?

When you cleared your history, did you select Cookies and/or Active Logins and clear those? That could explain why you are not automatically logged in.
I have not used the Zimbra mail server. However, generally speaking, when you are using webmail, you usually do not need to enter a mail server name. Usually you just have to login.
Where does the site stop working for you. Can you log in and get to the next page, or does it require you to keep trying to log in? Can you view the Inbox? Can you open individual messages? Et cetera.

Datetime value does not match the specified format

Hi All,
I am writing this function for a template
case when "Employment Events (Current)"."Most Recent Hire Date" is NULL then NULL else CAST(TIMESTAMPDIFF(SQL_TSI_YEAR,cast(cast("Employment Events (Current)"."Most Recent Hire Date" as char)as timestamp),Cast(Cast(@{EndDate}{CAST('2011-01-01' AS DATE)} AS CHAR) AS TIMESTAMP)) AS CHAR)||' year(s) ' end
but when it runs, it throws me this error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046] Datetime value 2011-01-01 does not match the specified format. (HY000)
What am I doing wrong? "Employment Events (Current)"."Most Recent Hire Date" is set to max - aggregation in the rpd.

I found the solution as well.
The ODBC driver on the Windows server was old (Version 6). I upgraded that to SQL Server Native Client 11.0 and everything works fine.

DI: Stock Transfer error (Unique field value does not match the system ...)

Hi
I made an add-on that makes stock transfers via DI API. The add-on has been running for two months with more than 10,000 stock transfers with almost no problems.
The company that is using the add-on have all their products managed by serial/batch numbers.
But just with one transfer Im getting the error in the stock transfer Add() method:
"Unique field value does not match the system serial number [(----)29-52]"
And I tried to debug it without success, I checked that the system serial numbers exists in the origin warehouse and are available. And I really can't find where is the problem.
If somebody knows what this error means, please let me know.
Thanks in advance,
Regards,
Allan

Hi János, thanks for your answer.
I found what was the problem, it was not exactly what you told me, but you gave me some insights to found the problem.
The thing is that Im using UDT's to store the information of stock transfers (before creating a real SAP stock transfer), because of the funcionality of the add-on. After some user have done some steps or validations, the add-on actually does the real SAP stock transfer.
The problem here was that my tables had some InternalSerial for some Item, for example the serial A-234, and before the real SAP stock transfer was made, they changed the serial from A-234 to A234 (in the serial number management). So the add-on was trying to create the transfer with the serial A-234, but the serial A-234 no longer exists.
I have to create a validation that if they change the serial number for an item, I have to change it in my UDT's.
On the other hand, Im not sure, but I think that I read before that you made a Warehouse Management add-on. This add-on that Im working now is a kind of warehouse management.
Im having a lot of headaches because the poor accessibility to the user fields in the OSRI and OIBT tables. Im sure that you have faced problems with this. If you have any tips or advices about this it would be greatly appreciated.
Thanks again,
Regards
Allan

Got JBO-25080: Definition name does not match the file it is loaded from

We are using jdev 11.1.1.5.0
We got the following error when running ADF application on Windows 2008 platform
[2011-08-26T23:57:53.728-05:00] [AdminServer] [WARNING] [] [oracle.adf.controller.faces.lifecycle.Utils] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 87d74ec2641f19b2:21e0e8f6:131ffbcf000:-8000-0000000000000afc,0] [APP: grc863] ADF: Adding the following JSF error message: Definition name: Survey does not match the file in which it is loaded from: oracle.apps.grc.domain.survey.survey[[
oracle.jbo.NoDefException: JBO-25080: Definition name: Survey does not match the file in which it is loaded from: oracle.apps.grc.domain.survey.survey
     at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1127)
     at oracle.jbo.mom.DefinitionManager.loadParent(DefinitionManager.java:1353)
     at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1061)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:562)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:484)
     at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:466)
     at oracle.adf.model.generic.AccessorDefImpl.getStructureDefImpl(AccessorDefImpl.java:217)
However, we are able to run application fine on linux platform.
We are aware of the bug https://bug.oraclecorp.com/pls/bug/webbug_edit.edit_info_top?rptno=8746171
We changed the UI classes to avoid that issue but we did not change our backend classes.
Thanks

Looks like you are an Oracle employee as the link you provided can't be reached from the outside.
If this is correct, you should use some kind of internal communication to address your problem, as we the normal users don't have access to the internal stuff.
Timo

Count the number of columns return in an user-input sql query

I need to do something like this
I let an user input a sql query and then execute it
assuming the sql query is always correct, it will return a Resultset
then a table will pop up to accomodate the number of columns the resultset will produce
i'm stuck at the part on how to check how many columns of data will be return in the resultset

     ResultSet rs = stmt.executeQuery("SELECT a, b, c FROM TABLE2");
     ResultSetMetaData rsmd = rs.getMetaData();
     int numberOfColumns = rsmd.getColumnCount();

Is it posible a query that builds dynamically the number of columns?

Hi experts!
I have a query that shows amounts in 12 columns corresponding on the calendar months of the year. Now, I need to change that getting in a previous screen how many months the user wants to see. The query has to build dynamically the number of columns to show. Can I do that with query designer? How?
I am working in V7.0.
I appreciate your help.
Thanks!
Ada.

Hi experts!
I have a query that shows amounts in 12 columns corresponding on the calendar months of the year. Now, I need to change that getting in a previous screen how many months the user wants to see. The query has to build dynamically the number of columns to show. Can I do that with query designer? How?
I am working in V7.0.
I appreciate your help.
Thanks!
Ada.

How to find the number of executions of a sql oracle 10g

Is there any script handy which is useful to get the number of executions of a sql in particualr time in a rac environment.

A lot depends on what time period you're trying to count the executions over...
In V$SQL, there is a column EXECUTIONS that will count the number of executions since the SQL statement was loaded into the shared pool, which may be too long a period or too short a period for your question.
If you are trying to get historical information and you have licensed the performance & tuning pack so that you can get the AWR, you could query the DBA_HIST_SQLSTAT table over an appropriate set of SNAP_ID's to get the totals for an arbitrary period of time.
Justin

How to get the number of columns in a result set???

hi everyone..
i am trying to establish a servlet applet communication....
my applet send the sql query to the servlet as serialised string and then the servlet executes the query...
Since i need to pass the result back to the applet, i thaught of passing the whole reult set to the applet..but that seems to be not possible..
so i thaught of storing my result set data in a vector and then pass the vector,but the first problem that i came across is that how to get the number of colums in a result set....
so is there a way to get the number of columns in a result set...???
and also i would like to know if it possible to send my whole result set to the applet bye serialization or by any method...???
thanx in advance

You shouldn't do. It expenses resources (you should always close the ResultSet and the Statement as fast as possible). Simply gently process it into a Collection or Map of DTO's. Those are serializable.

SQL Query - The number of columns specified in "SQL Query" does not match t

Similar Messages

Maybe you are looking for