SQL Server 2008 and CF 9 on localhost on XP Pro

Hi All,
I am getting an error saying the following error on localhost, "[Macromedia][SQLServer JDBC Driver]A username was not
specified and the driver could not establish a connection using NTLM (type 2)
integrated security:.
The strange thing is that I would only get this error if I am NOT connected to the internet at all. If I have any kind of internet access at all, I would NOT get this error. The MS SQL server is running on my computer, which uses the Windows authentication. I have checked the network configuration settings in my SQL Server Configuration Manager; the TCP/IP is enabled.
Does anyone know how to get this problem resolved?
Thanks in advance,
Monte

Windows authentication requires that your computer be able to talk to the domain controller (or verify that it can't talk to the domain controller, I guess), if your computer is a member of a domain. If both of these are on your laptop, you might as well just use native SQL logins (untrusted connections) instead of Windows authentication (trusted connections).
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Read this before you post:
http://forums.adobe.com/thread/607238

Similar Messages

Sql server 2008 and Windows 8

Hi
I published my WPF application using VS 2010 Express edition and trying to install it on Windows 8. The application runs but when it comes to searching the database that was included in the installation package it gives the error
"This program has compatibility issues Microsoft SQL Server(2008 and 2008 R2)"
The installer when setup was run did download SQL Server so I am not sure why I am getting this error. Any advice?

Hello,
Service Pack 3 for SQL Server 2008 is required to make it compatible for Windows 8 or Windows 8.1. For more information,
please read the following Support article:
https://support.microsoft.com/kb/2681562?wa=wsignin1.0
You can download SP3 from the following URL:
http://www.microsoft.com/en-us/download/details.aspx?id=27594
If you are installing SQL Server 2008, continue setup despite of the warning and apply SP3 after installing SQL Server 2008.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Data services with SQL Server 2008 and Invalid time format variable

Hi all
Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
$Load_Date = to_char(sysdate(),'YYYY.MM.DD');
When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
Could you please help me to fix this problem?
Thanks for your help in advance.

Thanks for your reply.
The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
When I deleted the column in the query object and added it again, my problem solved.

Connection pooling with SQL Server 2008 and Tomcat 6.0

Hello Everybody,
I'm creating a web application using struts 2.0 , tomcat 6.0 and sql server 2008.
Everything works fine but i'm unable to create connection pooling with sql server 2008.Please help me to solve this issue.
Code for this is as foolows:
in my META-INF/context.xml
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/spas" docBase="spas"
debug="5" reloadable="true" crossContext="true">
<Resource
name="jdbc/spas_new"
auth="Container"
type="javax.sql.DataSource"
maxActive="20"
maxIdle="10"
maxWait="-1"
user="spas_user"
password="spas123"
driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDriver"
url="jdbc:sqlserver://HGL-0053\dbo:1433;databaseName=spas_new;responseBuffering=adaptive;"/>
</Context>
in my web.xml
<resource-ref>
<description>SQL Server Datasource</description>
<res-ref-name>jdbc/spas_new</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
and in my ConnectionThread.java file i've used:
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Sorry! No Context Exception");
DataSource ds = (DataSource)ctx.lookup("java:/comp/env/jdbc/spas_new");
System.out.println("ds:"+ds);
conn=ds.getConnection();
Following is the exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Login failed for user ''.)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1225)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at login.V_SPAS_ConnectionThread.getConnection(V_SPAS_ConnectionThread.java:87)
at org.apache.jsp.login.v_005fspas_005flogin_005fpage_jsp._jspService(v_005fspas_005flogin_005fpage_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1023)
at org.apache.struts.tiles.TilesRequestProcessor.internalModuleRelativeForward(TilesRequestProcessor.java:345)
at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:572)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:221)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:694)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:665)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:54)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at login.V_SPAS_SecurityCheckFilter.doFilter(V_SPAS_SecurityCheckFilter.java:108)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user ''.

Hi Karthikeyan,
This is not the issue at all. I can open the management studio by the same login id and password and also i can make the database jdbc connection from plain java file.
It does not give me any problem by them.
I'm unable to find the actual problem. May be i'm missing something in connection pooling.
Please help.
Regards
Mina

B1 with SQL Server 2008 and SEC with SQL Server 2005

Hi,
we are currently upgrading from B1 2005 to B1 2007. With B1 2007 we could use MS SQL Server 2008. In parallel we have a SEC implementation (which uses SQL Server 2005).
Would there be any issues with the integration of B1 and SEC although they run on with different SQL Server products?
Thanks
Olaf

Hi
By creating two different instances you can run both simultaneouly. But pls do check whether SEC will run on 2008 or not ?
Ashish Gupte

Need to connect SQL Server 2008 and CR 2008 via OLE DB SQL Server Provider

I am relatively new to Crystal but have done some minor design/layout work in the past. I just purchased CR 2008 and dowloaded a Eval Copy of SQL Server 2008 to build test reports that will then be uploaded to a hosted web app we use for use with live data.
I am having some trouble, however, getting SQL server and CR 08 to talk the way I need them to. We have to use the OLE DB for SQL Server Provider connection for the reports to work in our hosted live environment but I cannot get this to work on SQL 2008. The server never appears in the Server dropdown and if I manually type it get the following error:
failed to open connection.
Detail ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provider for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access is denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17 ]
I am setting up the connection through the Database Expert choosing the OLE DB (ADO) folder and then selecting 'Microsoft OLE DB Provider for SQL Server' then entering my server name, user id, password, and Database name.
I have uninstalled and reinstalled everything twice. I have installed the Microsoft SQL Server 2008 Analysis Service 10.0 OLEDB Provider pack.
My provider/host does use SQL Server 2005 but since I can't get a free Evaluation version of it I have to use 2008 for my local copy. I have searched the web over (including here) and cannot find an answer to my issue.
I cannot use SQL Server Express version because our copy of the DB is too big. I cannot use the Native 10 provider as the reports will not work once I have uploaded them to the live data.
any help anyone can provide for this would be GREATLY appreciated. Thank you and sorry if this is a dupe post. I have searched everywhere and cannot find the answer.

Hello,
Go to Microsoft's site and download their OLE DB test tool and test the connection. Did you install the MS client tools to test the connection also?
As a test try creating an ODBC System DSN just to verify you can connect and create a report also.
And don't use the SA account, MS 2008 disabled it, sort of, so you'll have to create a new account and grant permissions to any table you need to use.
SQL 2008 changed security model big time so it's not the same as 2005 once was....
Good luck
Don

How to repair database using SQL server 2008 and C#

How to repair database in SQL server 2008 using C#
Musakkhir Sayyed.

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your
question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Can service broker work between SQL Server 2008 and 2012, ssbdiagnose returned an error !

Hello,
We have a setup of three applications that sends and receive messages using Service Broker.
One part is on a server, we'll call 'S' have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64)
The other part, we'll call 'E' use to have Microsoft SQL Server 2008 (SP3) - 10.0.5512.0 (X64).
But I am migrating these apps to a new server, we'll call 'C' that has: Microsoft SQL Server 2012 (SP1) - 11.0.3339.0 (X64)
I have used this command line tool to test it :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/CService" -S "ServerC" -d EDatabase TO SERVICE "//S/S/ECService" -S ServerS -d SDatabase ON CONTRACT //E/S/ECContact
It returned:
An internal exception occurred: Cannot read property ServiceBrokerGuid.
This property is not available on SQL Server 7.0.
So, I am wondering, is it supposed to work between these two versions ?
As more info, in the previous setup, it was using certificates but I have changed the Endpoints to use only Windows Authentication.
Thanks for any advice.
Claude

Hello,
Many thanks to you and Fanny for looking at my question.
In fact I was unclear, please let me provide you with more details.
Maybe the use of "always on" plays a role here... I will use different names so it might be clearer...
ServerSoftware2008 server has SoftwareDB database.
ServerEmployees2008 server has EmployeesDB database.
Service broker use to work fine between those two above, with certificates.
The new server comes in, two virtual servers with SQL Server 2012 Enterprise Edition with Always On.
I call it ServerEmployeesC but this is the listener. Behind, there is ServerEmployees2012_A and ServerEmployees2012_B and of course, both have a EmployeesDB database.
So, to use SSBDiagnose, I wonder if I need to use quotes around values and if I can use the listener name with FQDN. Concerning the use of instance name in the syntax, there is only one instance per server, is it best practice to use it on the command
line ?
Here is again, my command :
ssbdiagnose -E CONFIGURATION FROM SERVICE "//E/S/E" -S "ServerEmployeesC.sub.acme.com" -d EmployeesDB TO SERVICE "//S/S/E" -S "ServerSoftware2008.sub.acme.com" -d SoftwareDB ON CONTRACT //E/S/E
Again, many thanks for any help you will be able to provide, the people who configured this application at first are no longer here and I am trying to configure the new server in a task of migrating to SQL Server 2012 for one of the two servers involved
and I am having a lot of problems doing it.
Best regards,
Claude

Stopping sql server services while applying Service pack On SQL server 2008 and 2008 R2

Hi,
I am planning to apply service pack 3 for SQL 2008 R2 and Service pack 4 for SQL server 2008. This is my first time and I am applying first QA and DEV environment. I have one confusion. In cluster once you fail over sql resources to active node all of the
sql services including SQLSERVER and Agent are automatically stopped in passive node where we apply service pack. But in Stand alone, The services are not automatically stopped. Do I need to manually stop those services like SQLSERVER, Agent, Browser
and others if any before I start applying service pack?
Early Response is highly appreciated.
Thanks In Advance

Hello,
You don’t need to stop SQL Server services. Let SQL Server setup do it as needed.
Please read the following article for the cluster you would like to update:
https://support.microsoft.com/kb/958734?wa=wsignin1.0
The following article may be useful too:
http://www.sqlcoffee.com/Tips0014.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Configuring Service Broker between SQL Server 2008 and 2012 on Intranet

Hello, I would need help in configuring Service broker. As both servers are on the intranet, I wanted to remain the most simple so I used no certificates and allowed anonymous access but still, using SSBDiagnose, I can see errors.
I would like to paste here my configuration and my usage of SSBDiagnose, I already asked a question about SSBDiagnose usage but this new question is rather on the usage of certificates and the configuration of SSB, for me to know if I am doing this in the
best possible way.
Reading on the web, I have read in few places that certificates are not mandatory and that Windows Authentication only can be used. Then, I read that even if endpoints don't request certificates, the communication between two servers will still requires
certificates so I am wondering where is the truth...
I have two servers:
EmployeesSvr (SQL Server 2012 Enterprise Edition with Always On, EmployeesSvr is the listener name in front of two virtual servers)
CREATE MESSAGE TYPE [//E/S/ETChanged] VALIDATION = WELL_FORMED_XML
CREATE CONTRACT [//E/S/ECContract] ([//E/S/ETChanged] SENT BY INITIATOR)
CREATE QUEUE [dbo].[ECQueue] WITH STATUS = ON , RETENTION = OFF , ACTIVATION ( STATUS = ON , PROCEDURE_NAME = [dbo].[SSB_ECQueueProc] , MAX_QUEUE_READERS = 1 , EXECUTE AS N'dbo' )
CREATE SERVICE [//E/S/ECService] ON QUEUE [dbo].[ECQueue] ([//E/S/ECContract])
CREATE ROUTE [RouteToSECService] WITH SERVICE_NAME = N'//S/S/ECService' , BROKER_INSTANCE = N'F...' , ADDRESS = N'TCP://SoftwaresSrv.test.com:4022'
CREATE REMOTE SERVICE BINDING [SECServiceBinding] TO SERVICE N'//S/S/ECService' WITH USER = [domain\SvcBrokerTestUser] , ANONYMOUS = ON
CREATE ENDPOINT [ESBEndpoint] STATE=STARTED AS TCP (LISTENER_PORT = 4022, LISTENER_IP = ALL) FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED, MESSAGE_FORWARD_SIZE = 10, AUTHENTICATION = WINDOWS NEGOTIATE, ENCRYPTION = DISABLED)
SoftwaresSvr (SQL Server 2008 R2)
CREATE MESSAGE TYPE [//E/S/ETChanged] VALIDATION = WELL_FORMED_XML
CREATE CONTRACT [//E/S/ECContract] ([//E/S/ETChanged] SENT BY INITIATOR)
CREATE QUEUE [dbo].[ECQueue] WITH STATUS = ON , RETENTION = OFF , ACTIVATION ( STATUS = ON , PROCEDURE_NAME = [dbo].[SSB_ECQueueProc] , MAX_QUEUE_READERS = 1 , EXECUTE AS N'dbo' )
CREATE SERVICE [//S/S/ECService] ON QUEUE [dbo].[ECQueue] ([//E/S/ECContract])
CREATE ROUTE [RouteToECService] WITH SERVICE_NAME = N'//E/S/ECService' , BROKER_INSTANCE = N'2...' , ADDRESS = N'TCP://EmployeesSvr.test.com:4022'
CREATE REMOTE SERVICE BINDING [EECServiceBinding] TO SERVICE N'//E/S/ECService' WITH USER = [domain\SvcBrokerTestUser] , ANONYMOUS = ON
CREATE ENDPOINT [SSBEndpoint] STATE=STARTED AS TCP (LISTENER_PORT = 4022, LISTENER_IP = ALL) FOR SERVICE_BROKER (MESSAGE_FORWARDING = DISABLED, MESSAGE_FORWARD_SIZE = 10, AUTHENTICATION = WINDOWS NEGOTIATE, ENCRYPTION = DISABLED)
My SSBDiagnose command :
ssbdiagnose -E CONFIGURATION
FROM SERVICE //E/S/ECService
-S EmployersSvr
-d EmployersDB
TO SERVICE //S/S/ECService
-S SoftwaresSvr
-d SoftwaresDB
ON CONTRACT //E/S/ECContract
The result :
Microsoft SQL Server 10.50.1600.1
Service Broker Diagnostic Utility
D 29978 EmployersSvr EmployersDB
No valid certificate was found for user domain\SvcBrokerTestUser
D 29977 SoftwaresSvr SoftwaresDB
The user domain\SvcBrokerTestUser from database EmployersDB on EmployersSvr cannot be mapped into this database using certificates
D 29933 SoftwaresSvr SoftwaresDB
The routing address TCP://EmployeesSvr.test.com:4022 for service //E/S/ECService does not match any of the IP addresses for EmployersSvr
An internal exception occurred: An exception occurred while executing a Transact-SQL statement or batch.
Thank you for any help, I am searching for several answers :
Can I use the setup as I defined, with no certificate ? Is it risky ?
Is there too many objects defined ? Is it mandatory to have a Route and a Remote Service Binding ? I don't understand how those two are working togheter...
Is it ok to use the same windows account on each side, do they only need an 'Open' access rigth or do they need to be db_owner ?
Best regards,
Claude

Hi Claude,
1.Can I use the setup as I defined, with no certificate ? Is it risky ?
Service broker does not have to use certificate. The Certificate is necessary when you want to use dialog security, by which you can encrypt all messages sent outside a SQL Server instance.
http://technet.microsoft.com/en-us/library/ms166036(v=SQL.105).aspx
2.Is there too many objects defined ? Is it mandatory to have a Route and a Remote Service Binding ?
Remote Service Binding is used to privde dialog security. If you donnot need the dialog security, the Remote Service Binding is not mandatory.
http://technet.microsoft.com/en-us/library/ms166042(v=SQL.105).aspx
By default, each database contains a route that specifies that messages for any service which does not have an explicit route are delivered within the SQL Server instance. Since you have communications between different instances, creating a route between
them is necessary.
http://technet.microsoft.com/en-us/library/ms166032(v=SQL.105).aspx
3.Is it ok to use the same windows account on each side, do they only need an 'Open' access rigth or do they need to be db_owner ?
The windows account must own the certificate used for authentication. You can find more information below.
http://technet.microsoft.com/en-us/library/ms166045(v=SQL.105).aspx
http://technet.microsoft.com/en-us/library/ms186278(v=sql.105).aspx
Best regards,

JDBC drivers for SQL Server 2008 and PI7.0

HI,
I have deployed the JDBC drivers (sqljdbc.jar and sqljdbc4.jar) available for the SQL Server 2008 from the microsoft website as described in the how to document for deploying and configuring JDBC and JMS adapters.
I am running a JDBC to FIle(XML) scenario. When I go and see on the RWB CC monitoring, I get this error
Error during database connection to the database URL 'jdbc:sqlserver://hostname:1433;databaseName=123_Nagasatya' using the JDBC driver 'com.microsoft.sqlserver.jdbc.SQLServerDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:sqlserver://hostname:1433;databaseName=123_Nagasatya': UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (Unsupported major.minor version 50.0)'
WRT to the SQL server the port 1433 is open on the host and there is no firewall on the PI server as well as the SQL Server. Both are on different machines.Any help would be greatly appreciated.
Regards.

Hi Sujan,
This is the link.
[JDBC|http://www.microsoft.com/downloads/details.aspx?familyid=c47053eb-3b64-4794-950d-81e1ec91c1ba&displaylang=en]
or
You can also use the one on the market place.
Go to http://service.sap.com/msplatforms -> SQL Server
get zip-file sqljdbc_12_hotfix.zip contains the sqljdbc.jar file.
It should work.
Please let me know if you have any questions.
Regards.

JDBC drivers for SQL Server 2008 and NW 7.00 (UD connect)

HI, we recently updated a UD connect Source DB fronm SQL Server 2000 to 2008; currently struggling to find a compatible JDBC driver; does anyone have a UD connect or PI system connected to a SQL 2008 DB via JDBC drivers?

[http://go.microsoft.com/fwlink/?LinkId=144633&clcid=0x409]
[http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=99b21b65-e98f-4a61-b811-19912601fdc9#tm]

Windows 8 and IE 10 crashed after printing from Report Manager SQL server 2008 / 2008 R2

We have a problem with Windows 8 in combination with IE 10 and printing reports.
When we print a report from the Report Manager 'http://<servername>/reports' the browser crashed after a print.
Sometimes before printing and somthimes after printing or when you close the browser.
Al other operating systems like XP, Vista, Windows 7 with different IE versions have no problem.
I tried the report manager from SQL Server 2008 and SQL Server 2008 R2.
The same error occured when printing from our Internet application and the reportviewer.
(ASP application written in Visual Studio 2010 and reportviewer version 10.)
The event log shows two different messages.
Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16453, time stamp: 0x509b0dfb
Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505aaa82
Exception code: 0xc0000005
Fault offset: 0x00061252
Faulting process id: 0x780
Faulting application start time: 0x01ce03a294f7d1d5
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d4a72486-6f96-11e2-be6e-10604b6a74ed
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: IEXPLORE.EXE, version: 10.0.9200.16384, time stamp: 0x50107ee0
Faulting module name: rsclientprint.dll, version: 2009.100.1600.1, time stamp: 0x4bb67a74
Exception code: 0xc0000005
Fault offset: 0x00017e7a
Faulting process id: 0x9c8
Faulting application start time: 0x01ce02f35c70ab85
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\Downloaded Program Files\rsclientprint.dll
Report Id: a13fccc6-6ee6-11e2-be67-10604b6a74ed
Faulting package full name:
Faulting package-relative application ID:
Is there a fix for this problem?

Dear Mike Yin,
Thank you for your response. Your answer was the
reason for finding the real problem.
In december 2010 a SQL Server 2008 fix was the cause. I don't remember exactly the problem, but we changed the RSCLIENTPrint-x86.cab file. But instead to use the version of SQL Server 2008 we used the version of SQL Server 2008
R2 (10.50.1600.1). This worked until
Windows 8 (Internet Explorer crashed when printing).
We fixed this problem by using the RSClientPrint-x86.cab file from SQL server 2008 (10.0.5500.0).
But we now get the known problem that the
activeX always must be installed again.
The reason for this is that the version of
the SQL Server (10.0.5512.0)
and the rsclientprint.dll (10.0.5500.0) is different. SQL Server is newer (caused
by a security patch (KB2716436)).
Do you know when this problem will be resolved
by Microsoft?
Work arrounds
I've also tried to install the RSClientprint.dll
every time automatically (without user interaction).
But this will be delayed the printing for more
than 4 seconds. This
is very annoying.
Another workaround is to generate a PDF and print the PDF. But this is also
a lot slower.
Uninstall the security patch. but I don't know the security risk.

CFMXE 7.x and SQL Server 2008

Hello - a client recently upgraded to SQL Server 2008 and we can no longer connect from CFMXE 7.x.
I have asked them to go through the steps outlined here <http://blog.mxunit.org/2009/02/connecting-sql-server-2008-to.html> but errors persist. The DSN is defined using the standard SQL Server driver - is there an updated one that is required for 2008?
The error I have now is Cannot open database "database" requested by the login. The login failed.
Caveats - I have no access to the database server.
Suggestions?

I know we have a couple of CF 7 servers that are connecting using the built in sql drivers to sql 2008 without issue, so out of the box it should work.
I would suggest seeing if dynamic ports are enabled on the sql server, which would maybe cause a problem if there is a firewall involved and perhaps with the CF drivers.
To ensure you stay on port 1433, I think in CF 7 you can specify additional connection params in the DSN under the advanced dialog. I don't have a machine in front of me. I'd have to try it out.
Alternatelly you could try the "other" driver for the DSN, and use a JDBC connection string to connect and specify the port. If you need a better example, email me and I'll send over an example.
Our 2005 - 2008 Sql upgrades have been very smooth with regards to the DSN, and we didn't have to update anything aside from the server ip, so it should work.
Byron Mann
[email protected]
[email protected]
Software Architect
hosting.com | hostmysite.com
http://www.hostmysite.com/?utm_source=bb

Connecting SQL Server 2008 + CF8 mac

Hello,
I am currently porting all of our access databases to SQL Server 2008 and i am using a mac for development. If anyone can tel me how to connect sql server database from the cfadmin on mac to a virtual environment on parallels 5. In the cfadmin on mac SQL Server is listed as a kown datasource you can connect to but the only way i see to do this is thru a virtual environment or remote.
Please help
Thanks,
D

Having not used Parallels in some time I couldn't say for sure, but essentially that SQL engine needs to be accessible from Coldfusion on an IP address somewhere. Depending on what networking mode you're using, that'll either be:
1 - Its own IP
2 - Localhost, or 127.0.0.1
As long as your ColdFusion instance has network access to the SQL box, there's no additional config required.
O.

SQL Server 2008 and CF 9 on localhost on XP Pro

Similar Messages

Maybe you are looking for