SQL Server 2k - Pulling from 2 fact tables causes error

Trying to create a simple RPD as follows:
1 Dimension with Key Fund_ID
2 Fact tables, each with a Key Fund_ID
Created a Physical Layer, connecting Dimension to each Facts based off Fund_ID (One to Many)
Business Model Layer, connected Dimension to each Fact using complex join.
In Answers, the following is true:
Querying Dim and Fact Table A returns Data
Querying Dim and Fact Table B returns Data
Querying Dim AND Fact Table A, AND Fact Table B returns the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table A) does not contain mapping for [table B]. (HY000)
It appears to be complaining that it cannot map the fact tables to each other. I tried mapping the two fact tables together (even though that doesn't make DW sense), and the RPD won't validate.
I'm wondering if this is a bug connecting to SQL Server. We do the majority of our RPD development against ORACLE, and this is our first attempt at using SQL Server as a source.
Does anyone have any suggestions on this?
thanks

I doubt it very much its DB specific, the error is from the BI Server ([nQSError: 15018]) rather than SS.
Have you got a dimension hierarchy ? Are your content levels set for all logical tables, do you have 2 logical facts or 1 combined logical fact ? What do your Logical Table sources look like (ie how many per logical table, conent levels ?joins within the LTS?)
I would guess the problem lies in your BMM layer. But should check, is the conformed dimension joined to both fact tables in the physical layer or have your aliased it ?

Similar Messages

Collecting SQL Server Database Details from 32bit Instances Result in Error

Hello,
I am working with a customer to use the MAP toolkit to collection and SQL Server Instance and Database Details in their environment. At present we are testing the MAP toolkit against one server that has seven instances installed on it. One instance
is 64bit and the others are 32bit. All instances get discovered; however, the database details are only collected for the 64bit instance. All of the other instances are marked as failed. We ran MAP again with the tracing turned on and the
only errors for the six instances that failed appear to be WMI namespace errors showing up repeatedly (see below). This is just one example, but these invalid namespace errors are all over the log.
How can we resolve these errors?
Does MAP support collecting database details from 32bit instances?
<2015-02-17 13:59:05.77
WorkerThread1@WmiClassesCollectionStep,T1> ConnectToNamespaceAccessTest(Device(GUID={f787ea32-08d0-46ad-a910-3e270005b61c},DnsHostName='HOSTNAME')) - Trying to connect to the WMI namespace 'root\Microsoft\SqlServer\ComputerManagement12' while impersonating
the user 'USERACCOUNT'.
<2015-02-17 13:59:05.77
WorkerThread1@WmiClassesCollectionStep,T1> ConnectToNamespaceAccessTest(Device(GUID={f787ea32-08d0-46ad-a910-3e270005b61c},DnsHostName='HOSTNAME')) - Caught ManagementException connecting to the WMI namespace 'root\Microsoft\SqlServer\ComputerManagement12'.
Exception: System.Management.ManagementException: Invalid namespace
   |   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   |   at System.Management.ManagementScope.InitializeGuts(Object o)
   |   at System.Management.ManagementScope.Initialize()
   |   at Microsoft.AssessmentPlatform.InventoryEngine.DeviceInventory.WmiClassesCollectionStep.ConnectToNamespaceAccessTest(WmiCollectionState stateRec, WindowsIdentity identity, SavedImpersonationContext sic, String wmiNamespace)

This issue was resolved by updating to Windows Management Framework 4.0 on the server.

Confirmed Dimensions. OBIEE Not able to pull data from two fact tables.

Hi Experts,
I have a very simple set up of Star Schema with two fact tables and 1 dimension. Both fact tables joined to the dimension at the same level.
When i pull a column from both fact tables and the dimension table in OBIEE, it has to create simple SQL like below:
select FACT1.column1,
Fact2.Column1,
Dim.Column1
from FACT1, FACT2, DIM
where FACT1.ID = DIM.ID and FACT2.ID = DIM.ID
but instead it creating a query in a very complex way:
select case when D1.c2 is not null then D1.c2 when D2.c2 is not null then D2.c2 end as c2,
     D1.c1 as c3,
     D2.c1 as c4
from
     (select FACT1.Column1 as c1,
               DIM.Column1 as c2
          from
               DIM T1287863,
               FACT1 T1287945
   where (DIM.ID = FACT1.ID)
       ) D1 full outer join (
        select FACT2.Column1 as c1,
               DIM.Column1 as c2
          from
               DIM,
               FACT2
          where ( DIM.ID = FACT2.ID)
     ) D2 On isnull(D1.c2 , '1') = isnull(D2.c2 , '1') and isnull(D1.c2 , '2') = isnull(D2.c2 , '2')
I even tried setting the levels for both the fact tables and it still creates the query in avove way. Any thoughts on this will be vary helpful.

Subramanian,
see below the code we're using for the RFM.
on the ct_containers table i'm passing a line, and its getting updated after the call.
on the ct_errors table i just want to receive the errors and i only receive the line, we add manually there ('Serious error with validation code').
kr, achim
FUNCTION zbapi_ra_validations .
*"*"Local Interface:
*" IMPORTING
*"     VALUE(IS_RA_SCREEN) TYPE ZBAPI_S_RA_SCREEN
*" CHANGING
*"     VALUE(CT_ERRORS) TYPE ZRA_T_ERRORS
*"     VALUE(CT_CONTAINERS) TYPE ZRA_T_CONT_IP
DATA:
    lo_badi_handle TYPE REF TO zra_validation_rule,
    ls_error       TYPE zra_s_error.
GET BADI lo_badi_handle.
TRY.
      CALL BADI lo_badi_handle->validate_rules
        EXPORTING
          is_screen_flds = is_ra_screen
        CHANGING
          ct_containers = ct_containers
          ct_errors      = ct_errors.
    CATCH zcx_ra.
      ls_error-message = 'Serious error with validation code'.
      APPEND ls_error TO ct_errors.
ENDTRY.
ENDFUNCTION.
if i call this rfm in SE37 the ct_errors table is populated with all errors and the manually created line.
Message was edited by: Achim Hauck

Unexpected results getting data from two fact tables through conformed dim

Hi all,
We are getting an unexpected behaviour in our OBIEE 10.1.3.3.3. We have this scenario:
We have {color:#0000ff}2 fact tables{color}{color:#000000} called F1 and F2. F1 has one measure, f1m1 and F2 has another one, f2m1.
We have {color:#0000ff}4 conformed dimensions{color}, called D1, D2, D3, Date.
When we are requesting for individual fact tables, we are getting:
date d1 d2 d3 f1m1
dt1 - x - y - z - m1
dt1 - x - y - z' - m2
date d1 d2 d3 f2m1
dt1 - x - y - z - m3
dt1 - x - y - z'' - m4
But, trying to obtain a compare scenario, we are getting
date d1 d2 d3 f1m1 f2m1
dt1 x y z m1 m4
Instead of
date d1 d2 d3 f1m1 f2m1
dt1 x y z m1 m3
Looking at query log, we have catched the reason. That's why BI Server is using to solve this request using ROW_COUNT() to join SAWITH0 and SAWITH1 in SAWITH2 result set. So, the order may not be the same in the results sets in every fact table. More or less, generated query is like:
WITH
SAWITH0 AS
(select ....
from F1),
SAWITH1 AS
(select ...
from F2),
SAWITH2 AS
select from (select ...
ROW_NUMBER() OVER PARTITION (....) c10
from SAWITH0.d1 full outer join SAWITH1.d1 ....) D1
{color:#ff0000}where (D1.c10 = 1){color}
select SAWITH2. ....
from SAWITH2
order by c1..c10
The problems seems to be that BI server is ordering the result sets SAWITH0 and SAWITH1 and getting row number to join this results sets, but this is not getting the correct result.
Any ideas?
TIA
Javier
{color}
Edited by: jirazazábal on Mar 13, 2009 2:46 PM

I have done a logical fact table with two fact table source on it.
The Sql performed against the database was this one.
-------------------- Sending query to database named PRODS_AIX (id: <<153418>>):
WITH
SAWITH0 AS (select sum(T21296.CONSUMERS_SALES_EURO) as c1,
     T21309.DIVISION_CODE as c2
from
     DIVISION T21309,
     C_CONSUMERS_SALES T21296
where ( T21296.DIVISION = T21309.DIMENSION_KEY )
group by T21309.DIVISION_CODE),
SAWITH1 AS (select sum(T21356.ORDER_VALUE) as c1,
     T21309.DIVISION_CODE as c2
from
     DIVISION T21309,
     DWH_SALES_ORDER_OVERVIEW T21356
where ( T21309.DIMENSION_KEY = T21356.DIVISION_KEY )
group by T21309.DIVISION_CODE)
select distinct case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c2 is not null then SAWITH1.c2 end as c1,
     SAWITH0.c1 as c2,
     SAWITH1.c1 as c3
from
     SAWITH0 full outer join SAWITH1 On nvl(SAWITH0.c2 , 'q') = nvl(SAWITH1.c2 , 'q') and nvl(SAWITH0.c2 , 'z') = nvl(SAWITH1.c2 , 'z')
order by c1As you can see one select (SAWITH0) for the first fact table C_CONSUMERS_SALES and one select for the second fact table DWH_SALES_ORDER_OVERVIEW (SAWITH1 ) and the two statement are joined with a full outer join.
I ask me why you have the three select (SAWITH0,SAWITH1 and SAWITH2). Can you please paste the complete SQL performed ?
Can you tell us also which SQL is performed if you select only the columns from one fact table and not for the other ?
Regards
Nico
http://gerardnico.com

PL/SQL- Problem in creating a partitioned fact table using select as syntax

Hi All,
I am trying to create a clone(mdccma.fact_pax_bkng_t) of existing fact table (mdccma.fact_pax_bkng) using dynamic pl/sql. However, pl/sql anonymous block errors out with following error:
SQL> Connected.
SQL> SQL> DECLARE
ERROR at line 1:
ORA-00911: invalid character
ORA-06512: at "SYS.DBMS_SYS_SQL", line 1608
ORA-06512: at "SYS.DBMS_SQL", line 33
ORA-06512: at line 50
Here is pl/sql block:
-- CREATING FPB_T
DECLARE
v_owner VARCHAR2(32) := 'MDCCMA';
v_table_original VARCHAR2(32) := 'FACT_PAX_BKNG';
v_table VARCHAR2(32) := 'FACT_PAX_BKNG_T';
v_tblspc VARCHAR2(32) := v_owner||'_DATA';
CURSOR c_parts IS SELECT TABLESPACE_NAME, PARTITION_NAME,HIGH_VALUE, ROW_NUMBER() OVER (ORDER BY PARTITION_NAME) AS ROWNUMBER
FROM USER_TAB_PARTITIONS
WHERE TABLE_NAME = v_table_original
ORDER BY PARTITION_NAME;
v_cmd CLOB := EMPTY_CLOB();
v_cmd3 varchar2(300) := 'CREATE TABLE ' ||v_owner||'.'||v_table||' TABLESPACE '||v_tblspc
||' NOLOGGING PARTITION BY RANGE'||'(' ||'SNAPSHOT_DTM '||')' ||'(';
v_part VARCHAR2(32);
v_tblspc_name VARCHAR2(32);
v_row number;
v_value LONG;
v_tmp varchar2(20000);
v_cur INTEGER;
v_ret NUMBER;
v_sql DBMS_SQL.VARCHAR2S;
v_upperbound NUMBER;
BEGIN
v_cmd := v_cmd3;
OPEN c_parts;
FETCH c_parts INTO v_tblspc_name, v_part,v_value, v_row;
WHILE c_parts%FOUND
LOOP
IF (v_row = 1) THEN
v_tmp := ' PARTITION '||v_part||' VALUES LESS THAN ' ||'('|| v_value||')'||' NOLOGGING TABLESPACE '||v_tblspc_name;
ELSE
v_tmp := ', PARTITION '||v_part||' VALUES LESS THAN ' ||'('|| v_value||')'||' NOLOGGING TABLESPACE '||v_tblspc_name;
END IF;
v_cmd := v_cmd || v_tmp;
-- DBMS_OUTPUT.PUT_LINE(v_cmd);
FETCH c_parts INTO v_tblspc_name, v_part,v_value, v_row;
END LOOP;
-- DBMS_OUTPUT.PUT_LINE('Length:'||DBMS_LOB.GETLENGTH(v_cmd));
v_cmd := v_cmd||')'||' AS SELECT ' || '*'||' FROM ' || v_owner||'.'|| v_table_original ||' WHERE '||'1'||'='||'2'||';';
v_upperbound := CEIL(DBMS_LOB.GETLENGTH(v_cmd)/256);
FOR i IN 1..v_upperbound
LOOP
v_sql(i) := DBMS_LOB.SUBSTR(v_cmd
,256 -- amount
,((i-1)*256)+1 -- offset
END LOOP;
v_cur := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(v_cur, v_sql, 1, v_upperbound, FALSE, DBMS_SQL.NATIVE);
v_ret := DBMS_SQL.EXECUTE(v_cur);
CLOSE c_parts;
DBMS_OUTPUT.PUT_LINE(v_cmd);
-- EXECUTE IMMEDIATE v_cmd ;
END;
The above pl/sql creates a DDL for partitioned fact table(new) based on an existing fact table and get executes through CLOB.
Please look into the issue and let me know any changes or modifications/suggestions that are required to fix the issue. Any help is appreciated.
Thank You,
Sudheer

Think this is your problem:
v_cmd := v_cmd||')'||' AS SELECT ' || '*'||' FROM ' || v_owner||'.'|| v_table_original ||' WHERE '||'1'||'='||'2'||';';Remove the SQL terminator ';' ... dynamic SQL doesn't require it, try this instead:
v_cmd := v_cmd||')'||' AS SELECT ' || '*'||' FROM ' || v_owner||'.'|| v_table_original ||' WHERE '||'1'||'='||'2';Thanks
Paul

Finding missed sequence numbers and rows from a fact table

Finding missed sequence numbers and rows from a fact table
Hi
I am working on an OLAP date cube with the following schema:
As you can see there is a fact transaction with two dimensions called cardNumber and Sequence. Card dimension contains about three million card numbers.
Sequence dimension contains a sequence number from 0 to 255. Fact transaction contains about 400 million transactions of those cards.
Each transaction has a sequence number in 0 to 255 ranges. If sequence number of transactions of a card reaches to 255 the next transaction would get 0 as a sequence number.
For example if a card has 1000 transactions then sequence numbers are as follows;
Transaction 1 to transaction 256 with sequences from 0 to 255
Transaction 257 to transaction 512 with sequences from 0 to 255
Transaction 513 to transaction 768 with sequences from 0 to 255
Transaction 769 to transaction 1000 with sequences from 0 to 231
The problem is that:
Sometimes there are several missed transactions. For example instead of sequence from 0 to 255, sequences are from 0 to 150 and then from 160 to 255. Here 10 transactions have been missed.
How can I find all missed transactions of all cards with a MDX QUERY?
I really appreciate for helps

Thank you Liao
I need to find missed numbers, In this scenario I want the query to tell the missed numbers are: 151,152,153,154,155,156,157,158,159
Relative transactions are also missed, so I think it is impossible to get them by your MDX query
Suppose this:
date
time
sequence
20140701
23:22:00
149
20140701
23:44:00
150
20140702
8:30:00
160
20140702
9:30:00
161
20140702
11:30:00
162
20140702
11:45:00
163
As you can see the sequence number of the last transaction at the 20140701 is 150
We expecting that the first transaction of the next day should be 151 but it is 160. Those 10 transactions are totally missed and we just need to
find missed sequence numbers

How to call a sql server stored procedure from oracle

Hi all,
Please anybody tell me how to call a sql server stored procedure from oracle.
I've made an hsodbc connection and i can do insert, update, fetch data in sql server from oracle. But calling SP gives error. when I tried an SP at oracle that has line like
"dbo"."CreateReceipt"@hsa
where CreateReceipt is the SP of sql server and hsa is the DSN, it gives the error that "dbo"."CreateReceipt" should be declared.
my database version is 10g
Please help me how can i call it... I need to pass some parameters too to the SP
thanking you

hi,
thank you for the response.
when i call the sp using DBMS_HS_PASSTHROUGH, without parameters it works successfully, but with parameters it gives the following error
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC SQL Server Driver]Invalid parameter number[Microsoft][ODBC SQL Server Driver]Invalid Descriptor Index (SQL State: S1093; SQL Code: 0)
my code is,
declare
c INTEGER;
nr INTEGER;
begin
c := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@hsa;
DBMS_HS_PASSTHROUGH.PARSE@hsa(c, 'Create_Receipt(?,?)');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,1,'abc');
DBMS_HS_PASSTHROUGH.BIND_VARIABLE@hsa(c,2,'xyz');
nr:=DBMS_HS_PASSTHROUGH.EXECUTE_NON_QUERY@hsa(c);
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@hsa(c);
end;
Create_Receipt is the sp which requires two parameters.
please give me a solution
thanking you
sreejith

SharePoint 2013 - Server Error in '/' Application - This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database

Hi
After I ran SharePoint configuration wizard successfully to upgrade to SharePoint 2013 / SP1.
I can open Central Administration site just fine.
but now when I open any Site collection, I got this error.
Server Error in '/' Application
This operation can be performed only on a computer that is joined to a server farm by users who have permissions in SQL Server to read from the configuration database. To connect this server to the server farm, use the SharePoint Products Configuration
Wizard, located on the Start menu in Microsoft SharePoint 2010 Products
I have restarted all the servers: SQL server, WFE and APP servers but still cann't get this resolve.
Services on all servers are running, IIS - application pools are running.
Can someone help with where that could be a problem or if there is a solution.
Thanks in advance for your comments or advices.
Swanl

Please verify the followings:
Make sure that from the SharePoint front end and application servers that you can ping your SQL server.
Make sure that your Farm account has permission to the configuration database.
Lastly verify that your database didn't for some reasons go into recovery mode.
once everything is fine and you are still having issues, restart the SQL host service on the SQL server.
Once the service is restarted you will need to reboot Central Admin and then your front end servers.
In addition, as you built your farm inside the firewall, please disable the firwall, or create rules for SQL Server service in the firwall on SQL server.
More information about creating rules in firewall, please refer to the following posts: http://social.technet.microsoft.com/Forums/en-US/c5d4d0d0-9a3b-4431-8150-17ccfbc6fb82/can-not-create-data-source-to-an-sql-server http://www.mssqltips.com/sqlservertip/1929/configure-windows-firewall-to-work-with-sql-server/
Here is a similar post for you to take a look at: http://social.technet.microsoft.com/Forums/en-US/ea54e26c-1728-48d4-b2c5-2a3376a1082c/this-operation-can-be-performed-only-on-a-computer-that-is-joined-to-a-server-farm-by-users-who-have?forum=sharepointgeneral
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

How to take SQL Server Database backup from DB side

Dear All,
Please suggest how to take SQL Server Database backup from DB side?
System Info-
Portal Server (EP7)
MS SQL Server
Microsoft Windows 2003 Server
Suggest ASAP.
Thanks & Regards,
Sameer

Hi,
      I am planning to take SAP DB backup I need the procedure how to take backup. With in the server.
      My Operating System is IBM AIX
             Database is Oracle 10g
             SAP BI7.0 through this I need to take backup.
     Note:
            1) First of all I gone to /oracle/<SID>/102_64/dbs/init<SID>.sap and I changed the settings backup_dev_type = disk
             backup_root_dir = /home/db0/test/sateesh/DB0backup
             stage_root_dir = /home/db0/test/sateesh/DB0backup
           2) Then I gone to BRTOOLS I changed to disk there I scheduled Online backup
           3) Then I came to SAP DB13 I want to take daily backup. But the backup is not going properly what to do any mistake I had done
                Try to give the valuable solution to take Online backup

SQL Server Agent job between 2 instances fails with Error 18456 - Login Failed for user

Hi,
SQL Server version: 2012 EE
OS: Windows 2008 R2 Enterprise
In my server, i have 2 instances, and I am trying to configure a SQL Server Agent job to query one table in Instance A, and insert some modified data in Instance B, both in the same server.
When i execute the job in instance A, i get the following error:
Executed as user: NT SERVICE\SQLSERVERAGENT. Login Failed for user "NT SERVICE\SQLSERVERAGENT". [SQLSTATE 28000] (Error 18456). The step failed.
I have already configure instance A as Master and disabled encryption, by changing the parameter MsxEncryptChannelOptions to 0 in regedit. I've also made my target instance (instance B) as a Target.
What am i missing?
Thanks for your attention and pacience

Hello,
The NT SERVICE\SQLSERVERAGENT (virtual) account is not available on the other as you just mentioned. That is the reason for the login
failed error. Try using a Windows login as the
SQL Server Agent service account in both servers, the same Windows login (not a virtual account), and run jobs as the “sa” account.
http://msdn.microsoft.com/en-us/library/ms345578.aspx
You can also try a proxy account.
http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL Server Analysis Services (PowerPivot) instance returned the following error:

SQL Server Analysis Services (PowerPivot) instance returned the following error: Error Code: 3241607174 Description: A connection corresponding to the embedded PowerPivot data was not found in the
Excel workbook, file 'C:\Program Files\Microsoft SQL Server\MSAS10_50.POWERPIVOT\OLAP\Backup\Sandboxes\PowerPivotServiceApplication1\ReadOnlyExclusive-1096b00b-c487-46f9-afea-f717148863a8-Test_Sheet.xlsx'
Hi Have Installed power pivot to and exsistinf farm standalone farm.
What Should be the connection in the Excel fiile?
Thanks
Ravi
Ravi

Hi,
According to your post, my understanding is that you got an error with SQL Server Analysis Services.
Did you have installed PowerPivot for Excel on a client machine and modeled a database as part of this workbook?
The refresh in question is about refreshing the embedded Analysis Services database with data retrieved from the backend sources (defined when the database was originally modeled) and resaving the updated workbook. It should not be confused
with Excel / Excel Services options to refresh the data connections in the workbook. That option is about refreshing data stored in Excel’s caches. With regards to PowerPivot, that would be refreshing from the embedded database, not the backend data from which
the database was sourced. In summary, this feature will not work against a workbook which does not have an embedded database because there is no database to refresh. This is by design and should not be interpreted as indicating that there is something wrong
with your system.
More information:
http://powerpivotgeek.com/2010/02/07/a-connection-corresponding-to-the-embedded-powerpivot-data-was-not-found-in-the-excel-workbook/
There are some similar articles for your reference.
http://technet.microsoft.com/en-us/library/ee210712(v=sql.105).aspx
http://support.microsoft.com/kb/2761246
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a324436c-9901-494e-9f9b-314399d65ccb/data-refresh-dont-work-for-serverhealthxlsx
For the error “The data connection uses Windows Authentication and user credentials could not be delegated. The following connections failed to refresh”.
There are multiple causes for this error message. The common factor behind all of them is that Excel Services cannot get a valid Windows user identity from a claims token in SharePoint.
For more information:
http://technet.microsoft.com/en-us/library/ff487975.aspx
http://mmman.itgroove.net/2013/03/the-data-connection-uses-windows-authentication-and-user-credentials-could-not-be-delegated/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

SQL Server detected a logical consistency-based I/O error

Dear all,
Please suggest me the solution of following error
1). [Microsoft][SQL Native Client][SQL Server]SQL Server detected a logical consistency-based I/O error: torn page '' (SEVT) (expected signature: 0x0; actual signature: 0x4104104). It occurred during a read of page (1:37304) in database ID 5 at offset 0

Hi,
Check SQL server event log for detailed error description and check for database consistency.
also check http://www.bigresource.com/Tracker/Track-ms_sql-KkCLi1Iy/
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=154969
Thanks,
Neetu

How to force BI Server to pick from the Agg table and not the Fact table?

Hi All,
I have 3 tables as the Sources in the Key measures. 2 are fact tables and the other one is the agg table.
E.g.
Fact 1 at A,B,C,D and E level
Fact 2 at A,B,C level
Agg at A,B,C level which contains the measures from the Fact1 and Fact2
So when I select the measures from the Agg which are coming from Fact1 the Agg table get fired and when I select measures from Agg which are coming from Fact2, the Fact2 table gets fired in the SQL Query.
Now my question here is there anyway to tell BI Server that when I select Fact2 measures fire the Agg table and not the Fact2 table. The reason being the Agg and Fact2 tables are at the same level.
But I need to keep the Agg table as it is one level higher than the Fact1 tables.
Any pointers would be helpful.

hi,
you explain us your situation really good.but you forgot to tell us the most import,the measures in aggregate table and the aggregated dimensions.
meaning,you have 7 measures aggregated in some levels of your dimensions tables?if yes,there is no possibility Bi goes anywhere else..(by choosing only these measures and the defined levels at your dimensions..)
One more thing,if you choose a combination of your 2 fact data sources,bi goes?where???
hope i helped...
http://greekoraclebi.blogspot.com/

How to select data from Sql server 2005 database tableinto oracle database table

Hi,
I have table text1 in sql server database and text2 in oracle database (11g). Now how to move data from SQL Server table into oracle table. So please help me how to do it.
Thanks a lot in advance.
rk
OS: Windows 7 professional

Hi,
you can use export/import wizard and specify sql server as a source and oracle as destination.
I hope this is helpful.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Best Practice to fetch SQL Server data and Insert into Oracle Tables

Hello,
I want to read sqlserver data everry half an hour and write into oracle tables ( in two different databases). What is the best practice for doing this?
We do not have any database dblinks from oracle to sqlserver and vice versa.
Any help is highly appreciable?
Thanks

Well, that's easy:
use a TimerTask to do the following every half an hour:
- open a connection to sql server
- open two connections to the oracle databases
- for each row you read from the sql server, do the inserts into the oracle databases
- commit
- close all connections

SQL Server 2k - Pulling from 2 fact tables causes error

Similar Messages

Maybe you are looking for