SQL Server Agent available on Azure?

I would like to delete records from an database table on Azure when the table reaches a certain size.
I would normally do this by scheduling a stored procedure job using SQL Server Agent.
Is the SQL Server Agent available on databases held on Azure?
Should I use an alternative approach?
Thanks
Stew

Hello ,
Please take look on :
Scheduling job on SQL Azure
We can execute sql procedures on Azure based on our need (schedule configuration).
Create a mobile service.
Create a scheduler. Mention the database to be used for this.
Configure the scheduler for the frequency.
Click on tab Script. The script can be written in java script or .net. The script should have the code to run a proc.
 I used below code to run dbo.ExecuteDataRequest procedure Azure database.
 function Execute_Process_Request() {
      console.log("Executing ExecuteDataRequest...");
      mssql.query('Exec dbo.ExecuteDataRequest',{
         success: function(results){
         console.log("Finished the Process Request job.");
          error: function(err) {
            console.log("error is: " + err);
Find the new user added which will run the scheduler (Under Login folder of Security of Azure db server). Need to grant execute permission to the new user on the database where we need to execute the job.
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

Similar Messages

  • Unable to view SQL Server Agent while logged in as user

    Hello Everyone,
    I have granted SQLAgentUserRole permission to one of the user and using enterprise edition of SSMS. still user is not able to view SQL Server Agent. Any help will be greatly appriciated.

    There is no Enterprise Edition of SSMS. There is SSMS Basic and SSMS Complete. Prior to 2012 sp1, only SSMS Basic were available with Express Edition - but as of 2012 sp1 Expredd also offers SSMS Complete. SSMS Complete is selected bu default when you install
    SSMS (unless you are prior to 2012 sp1 and are using Express, of course).
    However, even SSMS Basic *should* show Agent assuming you have permissions for that. This is hearsay, but from trusted sources. Here is what to do:
    Check what is installed for the machine from where you are running SSMS. You can do that using SQL Server Installation Center - see this blog post: http://sqlblog.com/blogs/tibor_karaszi/archive/2011/02/10/what-does-this-express-edition-look-like-anyhow.aspx
     (towards the end).
    On that machine try both this problematic account as well as an account which is sysadmin. Does the sysadmin account see Agent? If so, you know permissions aren't granted properly. If not, then you know the tool is the problme.
    Also try the problematic account from a machine where you know you see Agent normally. Again, this will help you assess whether the problem is the tool (SSMS) or permissions for the account.
    Tibor Karaszi, SQL Server MVP |
    web | blog

  • SQL Server Agent Failed to decrypt protected XML node

    I'm getting the below error when trying to run sql server agent to run an SSIS package. I've updated folder security to allow sql server agent access, but cannot get the package to execute within SQL Management Studio. The package runs find in SSIS. 
    11.0.2100.60 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  12:12:00 PM  Error: 2014-11-30 12:12:02.65     Code: 0xC0016016     Source: LoadStgProspects      Description:
    Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that
    the correct key is available.  End Error  Error: 2014-11-30 12:12:03.88     Code: 0xC0016016     Source: LoadStgProspects      Description: Failed to decrypt protected XML node "DTS:Password" with error
    0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.  End Error  Error: 2014-11-30
    12:12:04.74     Code: 0xC0209303     Source: LoadStgProspects Connection manager "Excel Connection Manager"     Description: The requested OLE DB provider Microsoft.Jet.OLEDB.4.0 is not registered. If the 64-bit driver
    is not installed<c/> run the package in 32-bit mode. Error code: 0x00000000.  An OLE DB record is available.  Source: "Microsoft OLE DB Service Components"  Hresult: 0x80040154  Description: "Class not registered".
     End Error  Error: 2014-11-30 12:12:04.74     Code: 0xC020801C     Source: Load prospect files Prospect xls [231]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection
    method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error:
    2014-11-30 12:12:04.74     Code: 0xC0047017     Source: Load prospect files SSIS.Pipeline     Description: Prospect xls failed validation and returned error code 0xC020801C.  End Error  Error: 2014-11-30 12:12:04.74
        Code: 0xC004700C     Source: Load prospect files SSIS.Pipeline     Description: One or more component failed validation.  End Error  Error: 2014-11-30 12:12:04.74     Code: 0xC0024107     Source:
    Load prospect files      Description: There were errors during task validation.  End Error  Error: 2014-11-30 12:12:04.74     Code: 0xC00220DE     Source: LoadStgProspects      Description: Error
    0xC0012050 while loading package file "C:\Users\Jim\Documents\Visual Studio 2010\Projects\SSISTraining\SSISTraining\LoadStgProspects.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.  .  End Error  DTExec:
    The package execution returned DTSER_FAILURE (1).  Started:  12:12:00 PM  Finished: 12:12:04 PM  Elapsed:  4.337 seconds.  The package execution failed.  The step failed.,00:00:04,0,0,,,,0

    Hi selfdestruct80,
    According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
    According to my knowledge, the package may not run in the following scenarios:
    The current user cannot decrypt secrets from the package.
    A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
    File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
    A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
    A task or a connection manager requires that the current user account has correct permissions.
    According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
    /FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Problem Running SSIS Package with a SQL Server Agent

    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

    I accidently created two posts. The newest one has the details.
    I did not mean to.
    SQL Server: SQL Server 2012
    VS: Visual Studio 2012
    Hello,
          I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
    Store) instance on my SQL Server and tried to create a job that would run them from there.
          At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
    use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
    The connection manager "TestFile" is an incorrect type.  The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
    Cannot open the datafile "O:\*****\Success.txt"
    I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers  in this test project one for grabbing the source file and one for
    creating the new test file.
    I am not sure what to do.
    Thanks in advance,
    Matt

  • SQL Server Agent Jobs error for Slowly changing dimension

    Hi,
    I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
    All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed. 
    When i opened All Execution Report. I found the following error:
    Message
    Message Source Name
    Subcomponent Name
    Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description:
    "Login timeout expired". An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description: "A network-related or instance-specific error has occurred while establishing
    a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available. 
    Source: "Microsoft SQL Server Native Client 10.0"  Hresult: 0x80004005  Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
    Process Provider
    Slowly Changing Dimension [212]
    Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
    And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
    Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server  Agent Job run?
    Can anybody pls help me out.
    Thanks
    Bikram

    Hi Vikash,
    As i have mentioned in the above post, below 2 scenarios: 
    "Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
    query and deployed again and run, then the job succeeded. more than 15,000 failed.
    And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
    That means i am able to connect to sql server.
    But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
    Similarly in the 2nd scenario, if i implement SCD look up,  the job fails and shows the above mentioned error.
    And i am consistently reproducing this.
    Thanks
    Bikram

  • SSIS package is failing when using SQL server agent

    I am trying to execute an SSIS package through an SQL server agent and receiving the following error:
    Message
    Executed as user: serv-syst\SYSTEM. Microsoft (R) SQL Server Execute Package Utility  Version 10.50.1600.1 for 32-bit  Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started:  1:56:53 PM  Error: 2014-04-21
    13:56:54.81     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred.
    Error code: 0x80040E4D.  An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80040E4D  Description: "Login failed for user 'hsnzha'.".  End Error  Error: 2014-04-21
    13:56:54.82     Code: 0xC00291EC     Source: Drop table(s) SQL Task 1 Execute SQL Task     Description: Failed to acquire connection "DestinationConnectionOLEDB". Connection may not be configured
    correctly or you may not have the right permissions on this connection.  End Error  Error: 2014-04-21 13:56:54.82     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"    
    Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E4D.  An OLE DB record is available.  Source: "Microsoft SQL Server Native Client 11.0"  Hresult: 0x80040E4D  Description: "Login
    failed for user 'hsnzha'.".  End Error  Error: 2014-04-21 13:56:54.82     Code: 0xC00291EC     Source: Preparation SQL Task 1 Execute SQL Task     Description: Failed to acquire connection
    "DestinationConnectionOLEDB". Connection may not be configured correctly or you may not have the right permissions on this connection.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  1:56:53 PM 
    Finished: 1:56:54 PM  Elapsed:  0.844 seconds.  The package execution failed.  The step failed.
    My SSIS package retrieves a excel file and saves the vales into an SQL table. When I run the package by itself in my server it works fine but when it's called from a SQL agent, it fails with the above error. Please help me resolve it.

    That's the issue. If it's a SQL login the password cannot be retrieved by account executing the package from the job which is why login fails. In that case best thing would be set password in job properties or pass it using configuration created in the package
    See
     HTTP://blogs.msdn.com/b/runeetv/archive/2011/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
    My package is saved with ServerStorage which appears under \\server\Stored Packages\MSDB\PACKAGE and when I run it, it works fine.
    There is a new error message that I get now after following the steps from the link...
    Message
    Microsoft (R) SQL Server Execute Package Utility
    Version 10.50.1600.1 for 32-bit
    Copyright (C) Microsoft Corporation 2010. All rights reserved.
    Started:  3:34:22 PM
    Error: 2014-04-21 15:34:23.82
       Code: 0xC0202009
       Source: PACKAGEWMG Connection manager "SourceConnectionExcel"
       Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Office Access Database Engine"  Hresult: 0x80004005  Description: "Unexpected error from external database driver (????????).".
    End Error
    Error: 2014-04-21 15:34:23.82
       Code: 0xC020801C
       Source: Data Flow Task 1 Source - 'Contact Center$' [1]
       Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009.  There may be error
    messages posted before this with more information on why the AcquireConnection method call failed.
    End Error
    Error: 2014-04-21 15:34:23.82
       Code: 0xC0047017
       Source: Data Flow Task 1 SSIS.Pipeline
       Description: component "Source - 'Contact Center$'" (1) failed validation and returned error code 0xC020801C.
    End Error
    Error: 2014-04-21 15:34:23.82
       Code: 0xC004700C
       Source: Data Flow Task 1 SSIS.Pipeline
       Description: One or more component failed validation.
    End Error
    Error: 2014-04-21 15:34:23.82
       Code: 0xC0024107
       Source: Data Flow Task 1
       Description: There were errors during task validation.
    End Error
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  3:34:22 PM
    Finished: 3:34:23 PM
    Elapsed:  1.25 seconds

  • Excel Import Fails in SQL Server Agent Job but not when executed in BIDS

    We have a SQL Server agent job that has ran successfully for the past 6 months.  It started failing about a week ago.  I don't believe anyone installed anything on the server.  The proxy account used to run the job is an admin on the server.   
    I've tried everything I can think of or that I found on searches.  I even changed the connection manager from an Excel source to using an Microsoft office 12.0 Access Database Engine OLEDB connection and it still runs in BIDs and not as an agent job. 
    I also setup my LANID as a proxy account to see if the job would run (checking security) -- and it fails with the same error.   I also made sure the path is
    \\server\share rather than a drive letter.   Any ideas?
    The package is executed in 32 bit mode.  The package still runs fine in BIDS (where BIDs is opened on the server) but fails in the SQL Agent job with:
    Executed as user: xxxxxx\xxxxxx. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  9:00:00 AM  Error: 2014-12-01 09:00:02.46    
    Code: 0xC0202009     Source: xxxxxx Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE
    DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "External table is not in the expected format.".  End Error  Error: 2014-12-01 09:00:02.65    
    Code: 0xC020801C     Source: Load File to Staging Excel Source [43]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager
    "Excel Connection Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.  End Error  Error: 2014-12-01 09:00:02.77    
    Code: 0xC0047017     Source: Load File to Staging SSIS.Pipeline     Description: Excel Source failed validation and returned error code 0xC020801C.  End Error  Error: 2014-12-01 09:00:02.90    
    Code: 0xC004700C     Source: Load File to Staging SSIS.Pipeline     Description: One or more component failed validation.  End Error  Error: 2014-12-01 09:00:03.02     Code: 0xC0024107    
    Source: Load File to Staging      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  9:00:00 AM  Finished: 9:00:03 AM 
    Elapsed:  2.761 seconds.  The package execution failed.  The step failed.

    I logged on to the server with the account that the SQL Agent runs under and ran the following from a command
    line to execute the package:
    "D:\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTEXEC.exe" /FILE
    "\"K:\SSIS\xxxxxx\xxxxx.dtsx\"" /CHECKPOINTING OFF 
    /REPORTING EWCDI  /X86
    I wanted to see if it was a security issue with the agent account account - but
    this ran fine.
    I then updated the SQL Agent job to use an operating system command instead
    of a SSIS package on the job step.  This fails...
    The issue is definately with the SQL Server Agent

  • Sql server agent job failing

    Hi, I created a ssis package, that simply transfer an excel sheet into ole db, it works on its own, but when I try to use the sql server agent service, the first step is successful,but the second step of execution is not, but I don't have enough details
    to check the problem.
    when I check the database , a table is created, with only the column headers, but no rows.
    please can some one guide me. cheers.
    this was in the error log, i checked, and imake sure the file dtx, or the excel was not opened, but what i dont know is about the file permission
    ,ssa3,Error,1,USER-PC,ssa3,ssas3,,Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:38:23
     Error: 2014-10-23 11:38:23.34    
    Code: 0xC0202009     Source: Package Connection manager "Excel Connection Manager"     Description: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.  An OLE DB record is available.
     Source: "Microsoft JET Database Engine"  Hresult: 0x80004005  Description: "The Microsoft Jet database engine cannot open the file 'C:\Users\User\Desktop\dup.xls'.  It is already opened exclusively by another user<c/>
    or you need permission to view its data.".  
     Code: 0xC020801C     Source: Data Flow Task Excel Source [2]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  

    You can also create a proxy account in sql agent with required permissions to folder etc and configure it to run the job so that it always works
    http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • SQL Server Agent Job intermittently running for packages on SSISDB

    I created an SSIS package to pull data from OLAP Cube and push it into SQL Server using SSIS 2o12. I deployed the same on the SQL Server SSIS DB and created a SQL Server Agent Job to run the package. I have an account configured to run the job (not by
    creating proxy in the job, but SQL Server Agent is running under that account), that has access to the OLAP Cube. The job is running sometimes and failing sometimes. Why the job behaving weirdly. Any help on the issue will help me a lot. I am using SQL Server
    2012 SP1 enterprise edition (11.0.3000.0) (if it helps). The error message which pops up when it fails is :
    OLE DB Source failed the pre-execute phase and returned error code 0xC0202009
    SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80040E05.
    An OLE DB record is available.  Source: ""Microsoft OLE DB Provider for SQL Server 2012 Analysis Services.""  Hresult: 0x00000001  Description: ""Error Code = 0x80040E05, External Code = 0x00000000:."".
    "

    Hi,
    You are using Execute SQL Task to run a MDX query, right?  If so, here is an approach/workaround for your reference. If the MDX query doesn’t have parameters, you can create a view in SQL running the MDX query and make the Execute SQL Task to get data
    from that view. If the MDX query has parameters, you can try a Function and create a stored procedure, and then set the Execute SQL Task to execute that stored procedure.
    Regards,
    Mike Yin
    TechNet Community Support

  • SSIS package give an error if execute through SQL server agent

    I have created a SSIS package in BIDS 2012. If i execute this package through sql server agent it gives the below error:
    Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 64-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:19:47 AM  Error: 2015-01-20
    11:19:47.83     Code: 0xC0016016     Source: Sub_Hadoop_aggregation      Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.".
    You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.  End Error  Error: 2015-01-20 11:19:47.94     Code: 0xC0016016     Source:
    Sub_Hadoop_aggregation      Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error
    occurs when there is a cryptographic error. Verify that the correct key is available.  End Error  Error: 2015-01-20 11:19:48.04     Code: 0xC0016016     Source: Sub_Hadoop_aggregation      Description: Failed to
    decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct
    key is available.  End Error  Error: 2015-01-20 11:19:48.92     Code: 0xC00291EC     Source: alter_keys Execute SQL Task     Description: Failed to acquire connection "mstr_warehouse". Connection may not be
    configured correctly or you may not have the right permissions on this connection.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  11:19:47 AM  Finished: 11:19:48 AM  Elapsed:  1.42 seconds.
     The package execution failed.  The step failed.
    so i have change some properties in our package like protectionlevel change from encrypted to dontsavesensitive. After that i have created configuration file for the package and use that configuration file. It executes the package through sql server agent
    smoothly.
    Thanks
    Azhar Khan

    Hi selfdestruct80,
    According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
    According to my knowledge, the package may not run in the following scenarios:
    The current user cannot decrypt secrets from the package.
    A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
    File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
    A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
    A task or a connection manager requires that the current user account has correct permissions.
    According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
    /FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • SQL Server Agent fails to connect to DB after enabling mirror on failover cluster

    Hello:
    We have multiple databases running in a Failover Cluster instance: SQL 2012SP1 on Server 2008 R2 failover cluster (NOT AlwaysOn). We are trying to add a high-performance mirror in a standalone instance for DR. My understanding is that should be a perfectly
    normal, supported configuration.
    The mirroring is working properly; however, the clustered SQL Server agent is unable to run jobs that run in the mirrored databases.
    We get the following in the job log: Unable to connect to SQL Server 'VIRTUALSERVERNAME\INSTANCE'.  The step failed.
    There is a partner message in the agent log: [165] ODBC Error: 0, Connecting to a mirrored SQL Server instance using the MultiSubnetFailover connection option is not supported. [SQLSTATE IMH01]
    The cluster is not a mulitsubnet cluster. All hosts are connected to the same subnets and there is no storage replication. I can not find any place where I can adjust the connect string options for SQL Agent.
    Any guidance or suggestions on how to resolve this would be appreciated.
    ~joe

    SQL Team - MSFT:
    Thank you for taking the time to research and provide a clear answer.
    This seems very much a workaround and very unsatisfactory.
    You are correct, there is an IP dependency with OR condition. Moving to an AND condition is not viable for us. The whole point is to provide network redundancy. With an AND condition, if EITHER network interface fails, the service will go offline or fail
    to come online without manual intervention. This is arguably worse for uptime than having a single interface available.
    We are in process of rewriting all our SQL jobs to start in tempdb before transitioning to the appropriate target database. If this works for all of our jobs, I will mark the above response as answer.
    Again, thank you for the answer.
    Regards,
    Joe M.

  • SQL Server Agent

    Hello
    I am using SQL Server 2012 Express with advanced services however I cannot connect to the SQL Server Agent.  The Instance is local and the SQL server Agent service is installed and has the correct permissions.  
    According to http://www.microsoft.com/en-gb/download/details.aspx?id=29062 SQL server agent should be available.  
    Reporting services is greyed out and should also be available in this version.  
    Regards
    Ray

    Hello
    I am using SQL Server 2012 Express with advanced services however I cannot connect to the SQL Server Agent.  The Instance is local and the SQL server Agent service is installed and has the correct permissions.  
    According to http://www.microsoft.com/en-gb/download/details.aspx?id=29062 SQL server agent should be available.  
    Reporting services is greyed out and should also be available in this version.  
    Regards
    Ray
    SQL Server agent is not present in express edition.YOu might see agent XP in sp_configure but acctual SQL server agent is not present.This feature is not provided by Microsoft for express edition.There is nothing mentioned about agent in link you posted.It
    does have reporting feature
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • SQL Server Agent job between 2 instances fails with Error 18456 - Login Failed for user

    Hi,
    SQL Server version: 2012 EE
    OS: Windows 2008 R2 Enterprise
    In my server, i have 2 instances, and I am trying to configure a SQL Server Agent job to query one table in Instance A, and insert some modified data in Instance B, both in the same server.
    When i execute the job in instance A, i get the following error:
    Executed as user: NT SERVICE\SQLSERVERAGENT. Login Failed for user "NT SERVICE\SQLSERVERAGENT". [SQLSTATE 28000] (Error 18456). The step failed.
    I have already configure instance A as Master and disabled encryption, by changing the parameter MsxEncryptChannelOptions to 0 in regedit. I've also made my target instance (instance B) as a Target.
    What am i missing?
    Thanks for your attention and pacience

    Hello,
    The NT SERVICE\SQLSERVERAGENT (virtual) account is not available on the other as you just mentioned. That is the reason for the login
    failed error. Try using a Windows login as the
    SQL Server Agent service account in both servers, the same Windows login (not a virtual account), and run jobs as the “sa” account.
    http://msdn.microsoft.com/en-us/library/ms345578.aspx
    You can also try a proxy account.
    http://technet.microsoft.com/en-US/library/ms190698(v=SQL.105).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • How to stop SQL Server Agent Job if Stored Procedure returns value 0

    I have SQL Server 2012 SSIS.
    I have 2 SSIS packages.
    I have created SQL Server Agent Job for running packages.
    I have created steps. If first step have run succesfully next step is run.
    I have need to add new logic.
    I have validation stored procedure, which validate DB table values and returns 1 or 0.
    I would like to create logic where first of all this SP is runned. Return value of SP determines if steps are run or not.
    I was thinking to use Execute SQL Task for running SP.
    If value 1 is returned, then run rest of Tasks is run.
    If value 0 is returned, what should I do so that Job is stopped? I need assistance! 
    I want current step to stop never moved to next step.
    Is there any SSIS tasks, which can stop the Job?
    Or should I make Step for running validation SP?
    How to do so that if value 0 is returned stop Job.
    Kenny_I

    Please refer the below link:
    http://technet.microsoft.com/en-us/library/aa260308(v=sql.80).aspx
    Please read Remarks carefully!!!
    Remarks
    If a job is currently executing a step of type CmdExec, the process being run (for example, MyProgram.exe) is forced to end prematurely. Premature ending can result in unpredictable behavior such as files in use by the process being held open. Consequently,
    sp_stop_job should be used only in extreme circumstances if the job contains steps of type CmdExec.
    Permissions
    Execute permissions default to the public role in the
    msdb database. A user who can execute this procedure and is a member of the
    sysadmin fixed role can stop any job. A user who is not a member of the
    sysadmin role can use sp_stop_job to stop only the jobs he/she owns.
    When sp_stop_job is invoked by a user who is a member of the
    sysadmin fixed server role, sp_stop_job will be executed under the security context in which the SQL Server service is running. When the user is not a member of the
    sysadmin group, sp_stop_job will impersonate the SQL Server Agent proxy account, which is specified using
    xp_sqlagent_proxy_account. If the proxy account is not available,
    sp_stop_job will fail. This is only true for Microsoft® Windows® NT 4.0 and Windows 2000. On Windows 9.x, there is no impersonation and
    sp_stop_job is always executed under the security context of the Windows 9.x user who started SQL Server.

  • SQL Server Agent job fails with error : The package execution returned DTSER_FAILURE (1).

    Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
    Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
    Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
    at Teradata.Client.Provider.WpMessageManager.CheckForError()
    at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
    at Teradata.Client.Provider.WpLogonManager.Action()
    at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
    at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
    at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
    at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
    at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
    at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
    at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
    at Teradata.Client.Provider.TdConnection.Open()
    at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
    at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
    at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
    at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
    End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
    Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
    Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
    End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
    Description: There were errors during task validation. End Error
    DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
    Elapsed: 6.692 seconds. The package execution failed. The step failed.
    SQL Server agent job fails with above error, Please let me know process tohandle it.
    Thanks,
    Vishal.

    The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Maybe you are looking for

  • HT2506 Why does Preview also open previously viewed files when I double click on a file to view it?

    Trying to figure out how to stop it from doing this - finding it irritating - or is it a 'feature'? Already checked the preferences menu, but no luck

  • Creation of a procedure

    hi all, I have a text file called abc.txt which consits of the following data 001~ joshi (i.e account number and name - tilda seperated list). I have a table called abc which consits of two cols. acc_no and acc_name. My table consists of some data. N

  • Business content activation problem ?

    Hello , I am trying to activate material movement multiprovider with data flow before and after option . Logically with this option , all infoobject should also get activated which is related to this multiprovider , but in my case it is not happening

  • Windows 7 Instead of Windows 8

    I was looking to buy a computer, although I would like Windows 7 rather than Windows 8. This is because I am more familiar with the program and I just like it more. Anyways I was wondering if I bought a computer could it have Windows 7 when bought, i

  • My iPhone states it has more songs than it should

    Iphone 4Gs - 16GB latest IOS6 Itunes 11.01 (12) on Imac running 10.8.2 Everytime i sync Itunes seems to add all my 'purchased' songs to the Iphone which i do not want it to do. Its not 'checked' on the Imac itunes to do so. I sync a playlist called t