SQL server Agent Jobs High Avaialability - Crash on server 1 , automatically resumes from Secondary server

Hi All,
1)We have 2 physical Servers, where SSIS is installed (not clustered) . If machine crashes where Jobs running on server 1, then i want to automatically resumes the job from secondary server sql server job agent ?
2)Can i AUTOMATICALLY resume the job from secondary ssis server on crash of my primary ssis server ?
3)Can it resumes from the same point or we have to restart from begining ?

The functionality which you are looking for is not available in sql server as a standout feature.
You need to do this programattically.
You need to put savepoints in your ssis package/jobs where it logs the steps that it has completed and the steps that it has started. Any time the job is restarted it first has to check the logging table and see where it has reached and restart from the
step where it left off. The packages/jobs should have the ability to do so.
You can also set another job, which will always only run on the sql agent start, which particularly chceks for all jobs which would have stopped/cancelled and see if it has completed or has stopped in between. This will make sure that if sql fails over
or there is a restart of the agent all the jobs which were cancelled would be restarted.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
This seems to be one of the solutions but as already mentioned by others you have to build this logic - you won't get this functionality out of the box.
Sarabpreet Singh Anand
SQL Server MVP Blog ,
Personal website
This posting is provided , "AS IS" with no warranties, and confers no rights.
Please remember to click "Mark as Answer" and "Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Similar Messages

IPad crash 4.3.5 when resuming from sleep

Hi there everyone
My iPad 2 is crashing every now and again when ever I resume it from sleep. I press the button to wake it, and I see the lock screen for a second, and then it goes black and the apple logo appears and it subsequently boots up. It never crashes while in operation, only when I resume it from sleep.
Does anyone else suffer from this issue? I have done a full back up and then restore...any recommendations?
Thanks in advance :)
Chris :)

Have you tried restarting or resetting your iPad?
Restart: Press the On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, to restart press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).

One sql server agent job suspend

One sql server agent job--run full backup of one database is suspended from activity monitor.
How to find why it is suspended and troubleshoot?

"Suspended" is a common status for a thread. It indicates the thread is waiting on an external resource, which backups often are
Check few things:
1. Database size, how much backup is completed from below command and location where backup files are being placed
select session_id,command, percent_complete
from sys.dm_exec_requests
If that on network than might be due to slow netword backup take some time.
2. Check job history, expected
completion time of backup job and also if any change in the I/O and CPU time for the SPID
3.Check wait type of suspended spid, SQL server and event viewer logs. If any I/O issue on the server. Like disk responding slowly that might be a cause of delay.
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Pass value from SQL agent job step

Hi
I have created one SSIS package and I am scheduling the same using SQL Agent job. Now I want to pass one value from SQL job agent and want to use that value in SSIS package and then run that package. Can someone point to the solution.
Aniruddha http://aniruddhathengadi.blogspot.com/

I have created one parameter on SSIS package named strValue and assigned a empty value "". After that I have created one SQL job and step wherein I have set the value to "Nike" for parameter under Parameters tab.
Now I am expecting Nike value which I have set on SQL job step should get reflected on SSIS package when I am running my job. Am I doing anything wrong ?
Aniruddha http://aniruddhathengadi.blogspot.com/
Not sure what's going wrong but you can have quick look at below step by step tutorial:
Parameterizing Connections and Values at Runtime Using SSIS Environment Variables (via SQL Agent)
Cheers,
Vaibhav Chaudhari

How to track only one column updated in SQL Server 2012?

Is there a way to only track one specific column named Newsletter (bit format) of a table only when any record in that column has been changed from False to True?
e.g. In SQL Serer 2012, I have a table named tblSignupHistory. so i originally set the query like this:
ALTER TABLE tblSignupHistory
ENABLE CHANGE_TRACKING
WITH(TRACK_COLUMNS_UPDATED = ON)
and in my stored procedure, if any data is changed, SQL Server will automatically send me an email notification.
BUT i only want the notification email to be send only when this one specific column's value is changed from 0 to 1 (False to True). Any changes in other columns for the same table can be ignored.
Thanks.

Blog on the topic:
http://www.exacthelp.com/2012/03/send-email-when-data-of-any-columns-of.html
QUOTE: "Over all idea
1. Enable the change tracking (CT) in database
2. Enable the change tracking (CT) in table
3. Enabled and configure the database mail
4. Create a stored procedure which will get data change using CT and send an email
5. Create a sql sever agent job which will execute the procedure in every 10 second.
Alternate solutions blog on the topic: Get an alert when a certain record changes in SQL Server
SQL Server UPDATE() function:
http://technet.microsoft.com/en-us/library/ms177523.aspx
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Ssis agent job

i have one vaiable date my package ,i am using 2012 to make sql sever agent job
can i pass parameter from sql server agent job without config file , just after deploying package while creating job
where i need to specify

You can do it from Configuration tab within sql sgent job properties if package is in SSIS catalog. It will show the parameters through which you will pass the values. You need to have a parameter defined for passing the values to your package variable
beforehand.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SQL Server 2005 agent job runs a SSIS package ( Analysis Services Processing Task) fails

Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services.
It requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?

Hi,
SQL Server 2005 standard edition.
I have a SSIS package which has a Analysis Services Processing Task. I have tested the package in BIDS and it runs ok. But when I created a agent job and run it from the job it reports error:
Code: 0xC0012024 Source: Analysis Services Processing Task Description: The task "Analysis Services Processing Task" cannot run on this edition of Integration Services. It
requires a higher level edition.
This is the result of select @@version
Microsoft SQL Server 2005 - 9.00.4035.00 (Intel X86) Nov 24 2008 13:01:59 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Any idea?
Anyway, I have found a work around:
http://technet.microsoft.com/en-us/library/ff929186.aspx

Management Studio Crashing When Adding SSIS Step to SQL Agent Job

Hi
I am running Windows Server 2012, SQL Server 2012 SP2 CU2, SQL Server Management Studio 2012 and Visual Studio 2012.
I have existing SQL Agent Jobs that run SSIS packages and they all currently work. However, if I try to edit them or add a new job that uses a SSIS package Management Studio will crash. I was having this problem a couple weeks ago when I was still
on SQL Server 2012 SP1 CU9, so I updated to SQL Server 2012 SP2 CU2 and the problem went away for a couple weeks and I was able to add new SQL Agent jobs that run SSIS packages. But now it issue is back and there are no new updates to try and fix it.
Has anyone seen this before and found a reliable fix to it?
Steps to cause crash:
1) Open new SQL Agent Job
2) Select Steps and add a New Step
4) Change the job type to SQL Server Integration Services Package.
5) SSMS Crashes
Error Message Below:
===================================
The type initializer for '<Module>' threw an exception. (SqlManagerUI)
Program Location:
at Microsoft.SqlServer.Management.SqlManagerUI.DTSJobSubSystemDefinition.Microsoft.SqlServer.Management.SqlManagerUI.IJobStepPropertiesControl.Load(JobStepData data)
at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.UpdateJobStep()
at Microsoft.SqlServer.Management.SqlManagerUI.JobStepProperties.typeList_SelectedIndexChanged(Object sender, EventArgs e)
at System.Windows.Forms.ComboBox.OnSelectedIndexChanged(EventArgs e)
at System.Windows.Forms.ComboBox.WmReflectCommand(Message& m)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.Control.SendMessage(Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.Control.ReflectMessageInternal(IntPtr hWnd, Message& m)
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam)
at System.Windows.Forms.NativeWindow.DefWndProc(Message& m)
at System.Windows.Forms.Control.DefWndProc(Message& m)
at System.Windows.Forms.Control.WmCommand(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ComboBox.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()
at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.newJobStep_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.RunDialog(Form form)
at System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
at System.Windows.Forms.Form.ShowDialog()
at Microsoft.SqlServer.Management.SqlMgmt.RunningFormsTable.RunningFormsTableImpl.ThreadStarter.StartThread()
===================================
The C++ module failed to load.
(DTEParseMgd)
Program Location:
at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
at .cctor()
===================================
Index was outside the bounds of the array. (DTEParseMgd)
Program Location:
at _getFiberPtrId()
at <CrtImplementationDetails>.LanguageSupport._Initialize(LanguageSupport* )
at <CrtImplementationDetails>.LanguageSupport.Initialize(LanguageSupport* )
Thanks,
Anthony

I ended up being able to work around this without having to recreate everything on a Windows Server 2008 R2. I did this by setting up an azure point to site VPN from
my computer to the Windows Server 2012 hosted on azure. I was then able to connect SSMS from my computer to the Azure VM allowing me to create and edit new SQL Agent jobs that run SSIS packages. Here are the steps to do this
1) Connect to the VPN from another machine besides the server.
2) Open SSMS using the runas.exe command with the Domain\User Name of a Windows account on the server.
- Ex. Runas.exe /netonly /user:DOMAIN\USER "C:\Program Files (x86)\Microsoft SQL Server\110\Tools\Binn\ManagementStudio\Ssms.exe"
2) Connect to the VM's Database Engine using its internal IP address and the port that SQL Server is listening on (default is 1433) and a SQL Login
setup on the server.
-Ex IP, 10.0.0.1,1433
3) Create a new job with the type SQL Server Integration
Services Package. Select the package source (SSIS Catalog). I could not get the server to be automatically discovered here so enter the server’s internal IP address and select the package you want to run.
4) Right click the new SQL Agent Job and choose Script Job As, CREATE To, New Query Window. This is the script to create the
SQL Agent Job and it needs to be edited to contain the Name of the server on the internal IP address that was used earlier.
5) Edit the @command= line of the script to use the server name. Change the highlighted part below to the server name.
- Ex . @command=N'/ISSERVER "\"\SSISDB\PACKAGELOCATION\"" /SERVER
"\"10.0.0.1\"" /Par "\"$ServerOption::LOGGING_LEVEL(Int16)\"";1 /Par "\"$ServerOption::SYNCHRONIZED(Boolean)\"";True /CALLERINFO SQLAGENT /REPORTING E',
- Change to this
- @command=N'/ISSERVER "\"\SSISDB\PACKAGELOCATION\""
/SERVER SERVERNAME /Par "\"$ServerOption::LOGGING_LEVEL(Int16)\"";1 /Par "\"$ServerOption::SYNCHRONIZED(Boolean)\"";True /CALLERINFO SQLAGENT /REPORTING E',
6) Now change the name of the package in the script and run it. Now the new package can be edited in the GUI to change things like the schedule and alerts. Also you
can edit any existing packages.

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

How to Create a SQL Agent Job For A SSIS Package with Sql Server Authentication

Hi ALl,
I have a SSIS package which basically has a data flow task in which i pull the data from one server and copy it into another server and my source server is the one where i dont have windows authentication and i have to only use a sql server authentication
. This package runs fine if i click the server connection properties type the password and save it.
Now, my task is to set up a sql agent job which basically uses a proxy account and takes this package from the file system and runs it.But when i try to run this package, its failing with an error saying
"Login Failed For rpt5user" where rpt5user is the username for my sql server authentication of the source connection.
Can someone please help me with any suggestions on how to do this?
I have heard that we can achieve it by using xml config file which i have never used and i am trying to google around but for no luck.
So, If someone can please throw any suggestions or ideas on this it would be great.
Thanks

You need to add password as a config item and set it from the file source or sql table
see this as an example
http://blogs.msdn.com/b/runeetv/archive/2009/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SQL Server Agent Jobs error for Slowly changing dimension

Hi,
I have implemented Slowly changing dimension in 5 of my packages for lookup insert/update.
All the packages are running good in SSDT. And when i deployed the project to SSISDB and run the packages all are running successfully. But when i created a job out of that and run the packages, then 3 packages ran successfully and 2 packages failed.
When i opened All Execution Report. I found the following error:
Message
Message Source Name
Subcomponent Name
Process Provider:Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description:
"Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "A network-related or instance-specific error has occurred while establishing
a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.". An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Named Pipes Provider: Could not open a connection to SQL Server [53]. ".
Process Provider
Slowly Changing Dimension [212]
Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded.
Now i am not able to figure out, what exactly is the problem with Slowly changing dimension task for more than 15,00 records in SQL Server Agent Job run?
Can anybody pls help me out.
Thanks
Bikram

Hi Vikash,
As i have mentioned in the above post, below 2 scenarios:
"Then i opened Provider package in SSDT and changed the source reading record limit from 4,00,000 to 15,000 in source
query and deployed again and run, then the job succeeded. more than 15,000 failed.
And in the 2nd experiment, I removed slowly changing dimension task and implemented normal lookup for insert/update, and set the source reading limit again to 4,00,000 and deployed again and run, then the job succeeded."
That means i am able to connect to sql server.
But if i change the 1st scenario and read 4,00,000 records, the job fails and shows the above mentioned error.
Similarly in the 2nd scenario, if i implement SCD look up, the job fails and shows the above mentioned error.
And i am consistently reproducing this.
Thanks
Bikram

SSIS Package Fails when Scheduled as a SQL Server Agent Job

I have an SSIS package that runs without any problems when executed through BIDS.
However, when I schedule the SSIS as an Agent job, it fails completely or part way through. When it partially runs, the part that it is failing on is a Script Task that moves the source data file to an archive folder (on the same server).
I have tried using my domain account as the owner of the job, then the job fails straight off and I get an error:
Unable to determine if the owner (Domain\MyID) of job JobName has server access (reason: Could not obtain information about Windows NT group/user 'Domain\MyID'
If I change the owner to the 'sa' account , then the job partially runs, but then fails because 'sa' is a SQL account and does not have access to the filesystem.
I have managed to get it to work by using the SQL2008_Local account and granting modify permissions to the affected folders.
My question is - what is the advised way of doing this?
Thanks
Gary

Hi Garyv.King,
When you see a SSIS package fails running in a SQL Agent job, you need to first consider the following conditions:
1. The user account that is used to run the package under SQL Server Agent differs from the original package author.
2. The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
For more detailed information about the issue, please following this KB article:
An SSIS package does not run when you call the SSIS package from a SQL Server Agent job step
http://support.microsoft.com/kb/918760
You can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues.
The following 4 issues are common encountered in the SSIS forum.
1. The package's Protection Level is set to EncryptSensitiveWithUserKey but your SQL Server Agent service account is different from the SSIS package creator.
2. Data source connection issue.
3. File or registry access permission issue.
4. No 64-bit driver issue.
For more information about it, please see:
How do I troubleshoot SSIS packages failed execution in a SQL Agent job:
http://social.technet.microsoft.com/Forums/en-US/sqlintegrationservices/thread/e13c137c-1535-4475-8c2f-c7e6e7d125fc
Thanks,
Eileen

SQL Server Agent running SSIS package fails Unable to determine if the owner of job has server access

I have a web application developed through VS 2012 which has a button on a form that when operated starts a SQL Server agent job on the server that runs an SSIS package. The website and the instance of SQL Server with the agent and SSIS package are
on the same windows 2008 r2 server. When the button is operated no exceptions are raised but the SSIS package did not execute.
When I look in the logfileviewer at the job history of the sql server agent job I see that the job failed with message...
The job failed. Unable to determine if the owner (DOMAINNAME\userid) of job runWebDevSmall has server access (reason: Could not obtain information about Windows NT group/user 'DOMAINNAME\userid'<c/> error code 0x6e. [SQLSTATE 42000] (Error 15404)).,00:00:00,0,0,,,,0
...even though DOMAINNAME\userid is in the logins for the sql server and has admin authorities.
Could someone show me what I need to do to get this to run? Thanks tonnes in advance for any help, Roscoe

This can happen when the network is too slow to allow a timely completion of the verification. Or the account running has no such right.
I suggest you try using the SA account for the job as it does not require to poll the AD.
Arthur My Blog

SQL server Agent Jobs High Avaialability - Crash on server 1 , automatically resumes from Secondary server

Similar Messages

Maybe you are looking for