SQL Server cannot authenticate using Kerberos because the Service Principal Name (SPN) is missing, misplaced, or duplicated

We are getting this below alert message, while using SCOM 2012 R2.  Anybody have any idea how to resolve this on the SQL box ?
Thx...
SQL Server cannot authenticate using Kerberos because the Service Principal Name (SPN) is missing, misplaced, or duplicated.
Service Account: NT Service\MSSQL$SQLEXPRESS
Missing SPNs:
Misplaced SPNs: MSSQLSvc/mysqlbox.com:SQLEXPRESS - sqldbadmin
Duplicate SPNs:

To Fix this issue, You can check below links
http://support.microsoft.com/kb/2443457/EN-US
http://www.scomgod.com/?p=155
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Similar Messages

  • SQL SERVER Failover Cluster switch failure because the passive node automatically reassign drive letter

    I switch the sql server resource group to the standby node , when the disk resource ready bring online in the passive node ,then occur exception. because the original dependency disk resource the drive letter is 'K:' , BUT when the disk bring online , it
    automatically reassign new drive letter 'H:' ,  So the sql server resource couldnot bring online . And After Manual modify the drive letter to 'K:' in the passive node , It Works !  So my question is why it not use the original drive letter
    and reassign a new one . what reasons would be cause it ? mount point ? Some log as follows:
    00001cbc.000004e0::2015/03/12-14:41:11.377 WARN  [RES] Physical Disk <FltLowestPrice_K>: OnlineThread: Failed to set volguid \??\Volume{e32c13d5-02e6-4924-a2d9-59a6fae1a1be}. Error: 183.
    00001cbc.000004e0::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk <FltLowestPrice_K>: Found 2 mount points for device \Device\Harddisk8\Partition2
    00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk: PNP: Update volume exit, status 1168
    00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk: PNP: Updating volume
    \\?\STORAGE#Volume#{1a8ddb8e-fe43-11e2-b7c5-6c3be5a5cdca}#0000000008100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
    00001cbc.00001cdc::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk: PNP: Update volume exit, status 5023
    00001cbc.000004e0::2015/03/12-14:41:11.377 ERR   [RES] Physical Disk: Failed to get volname for drive H:\, status 2
    00001cbc.000004e0::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk <FltLowestPrice_K>: VolumeIsNtfs: Volume
    \\?\GLOBALROOT\Device\Harddisk8\Partition2\ has FS type NTFS
    00001cbc.000004e0::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk: Volume
    \\?\GLOBALROOT\Device\Harddisk8\Partition2\ has FS type NTFS
    00001cbc.000004e0::2015/03/12-14:41:11.377 INFO  [RES] Physical Disk: MountPoint H:\ points to volume
    \\?\Volume{e32c13d5-02e6-4924-a2d9-59a6fae1a1be}\

    Sounds like you have an cluster hive that is out of date/bad, or some registry settings which are incorrect. You'll want to have this question transferred to the windows forum as that's really what you're asking about.
    -Sean
    The views, opinions, and posts do not reflect those of my company and are solely my own. No warranty, service, or results are expressed or implied.

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • Some of the SQL Server 2012 are not getting monitored in SCOM 2012 SP1.( basics monitoring is happening, expect SQL role)

    Found that all the SQL servers are getting monitored, expect few servers which are having SQL server 2012 role.
    proxy is enabled for these servers, when I checked discovered inventory for SQL 2012 database unable to find these servers in that list.
    and other servers having SQL Server 2012 monitoring properly issue is with only few servers.

    Hi,
    thanks for the all the input, we are using service account as windows account instead of action account !!
    will that also affect discovery of SQL role?
    and also found that there are many alerts in SCOM console, with alert description :
    SQL Server cannot authenticate using Kerberos because the Service Principal Name
    (SPN) is missing, misplaced, or duplicated.
    please let me know how we can resolve this issue, will it affect SQL discovery as well ?

  • Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

    Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%). 
    The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
    configured threshold.” 
    There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20). 
    From what I can tell, all of the IP addresses are from Taiwan. 
    The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014). 
    From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening. 
    The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
    Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
    The Error reads:
    The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
    mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
    Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
    Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
    Recent changes to the system:
    About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
    Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
    Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

    Hi,
    Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Cannot enter correct values in the SQL server express 2012 using labview

    Hi everyone,
    I am trying to enter the 2D array I get from DAQ into the SQL server express 2012 using Labview. When I am run the software, it connects with the table but doesn't enter the correct values. It only enters the "0" for each column of the table. I have attached the VI as well as the screenshot from the database server. 
    I am also writing the same 2D array data into the text file and I get the correct readins there. 
    Is there something I am doing wrong here. 
    Attachments:
    test.png ‏251 KB
    test3.vi ‏96 KB

    If you had read the QL manuals or reference books, you would be aware SQL Server doesn't do multidimensional arrays.
    I prefer BLOBs or VARCHAR(MAXCHAR) as an alternative. I enter the values in formatted string values delimiter separated.
    But how to deal with multidimensional arrays. Well up to 3-5 you can use simple value for each "dimension". So the lowest dimension
    would be comma delimit. The next set of values and each succeeding set for each 2nd dimension values would have the "set" of values separated
    by a ":" or semicolon. For the third I use the ":" or colon to separate each 2D block of the 3rd dimension. This can all be easily reparsed
    with a multidimensional parser for the application. Should be simple to build. (e.g.. Use string arrays to parse the higher dimensions
    and numeric array for the lowest dimension). The VARCHAR(MAXCHAR) has an upper data bound of 2GB! If you have to save more
    than 3 dimensions for most all applications, you don't understand how best to analyze the test data and may want to give it more 
    thought to optimize the operation as well as the design, so it doesn't get too complex. By the way I use Data Clusters built in the
    data order and type as for SQL Server Data Table. This makes the design of the SQL Server interface easy as pie .

  • The project cannot be checked out because the server is in read-only mode.

    Receiving the message "The project cannot be checked out because the server is in read-only mode." when a project manager is trying to access a project. He is a backup PM, and I'm wondering if that's why he is getting the message (since he is
    not the Owner or Status Manager of the project he is trying to access). We are using SharePoint permissions in Project Server 2013.

    Hi,
    I have a solution that might work for you, please follow steps below:
    1) Go to your project schedule, make a small modification to any task on schedule and 'Publish' the project.
    2) While your project is being published and saved, open another window 
    Server Settings -> Manage Queue Jobs
    3) Here you can view the progress of your current Project Publishing update, check if all goes smooth and your project is published successfully without indicating any errors :
     ( to view any error look at the last column of
    table on Manage Queue Job page)
    4) Also in your Project window see if the project is published and not saved as Draft.
    Basically this will give you a fair idea of your project being published or not.
    Regards

  • How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?

    How to delete/drop all the tables from SQL Server Database without using Enterprise Manager?
    I tried using DROP Tables, Truncate Database, Delete and many more but it is not working.  I want to delete all tables using Query Analyzer, i.e. through SQL Query.
    Please help me out in this concern.
    Nishith Shah

    Informative thread indeed. Wish I saw it early enough. Managed to come up with the code below before I saw this thread.
    declare @TTName Table
    (TableSchemaTableName
    varchar
    (500),
    [status] int
    default 0);
    with AvailableTables
    (TableSchemaTableName)
    as
    (select
    QUOTENAME(TABLE_SCHEMA)
    +
    +
    QUOTENAME(TABLE_NAME)
    from
    INFORMATION_SCHEMA.TABLES)
    insert into @TTName
    (TableSchemaTableName)
    select *
    from AvailableTables
    declare @TableSchemaTableName varchar
    (500)
    declare @sqlstatement nvarchar
    (1000)
    while 1=1
    begin
    set @sqlstatement
    =
    'DROP TABLE '
    + @TableSchemaTableName
    exec
    sp_executeSQL
    @sqlstatement
    print
    'Dropped Table : '
    + @TableSchemaTableName
    update @TTName
    set [status]
    = 1
    where TableSchemaTableName
    = @TableSchemaTableName
    if
    (select
    count([Status])
    from @TTName
    where [Status]
    = 0)
    = 0
    break
    end

  • HT201407 hi, i am from india and i have just replaced my sim card in my iphone 4s but it says that iphone could not be activated because the activation server cannot be reached. what is the solution to attend this problem ?

    hi, i am from india and i have just replaced my sim card in my iphone 4s but it says that iphone could not be activated because the activation server cannot be reached. what is the solution to attend this problem ?

    Hello Sunnymalik1,
    You must only have the required sim. All the information should be on your box.
    ^Connor

  • HT1386 after i updraded tio ios 6 I get a message " this device cannot be used because the service is not started"

    after i updraded to ios 6 i get a message that my device canot be used because the service is not started

    Is this what you mean...
    AMDS for Mac  >  http://support.apple.com/kb/ht1747
    AMDS for Windows  >  http://support.apple.com/kb/TS1567

  • DPM failing SQL backups due to error: "the SQL Server instance refused a connection to the protection agent. (ID 30172 Details: Internal error code: 0x80990F85)

    I ran across this error starting on 6/4/2011 and have been unable to find the root of the problem.  In our environment, we have a DPM 2010 server dedicated to backing up all our SQL envrionment (about 45 SQL Servers total).  All of the SQL
    environment is backing up fine except for a SQL Cluster Application.  This particular SQL Instances is part of a 6 node failover cluster with 6 SQL Instances distributed amongst them.  The other 5 SQL instances in the cluster are backing
    up fine; only one instance is failing.  The DPM Alerts section shows this error when attempting to do a SQL backup of one of the databases on this SQL instance:
    Affected area: KEN-PROD-VDB001\POSREPL1\master
    Occurred since: 6/11/2011 11:00:56 PM
    Description: Recovery point creation jobs for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com have been failing. The number of failed recovery point creation jobs =
    4.
     If the datasource protected is SharePoint, then click on the Error Details to view the list of databases for which recovery point creation failed. (ID 3114)
     The DPM job failed for SQL Server 2008 database KEN-PROD-VDB001\POSREPL1\master on SQL Server (POSREPL1) - Store Settings.ken-prod-cl004.aarons.aaronrents.com because the SQL Server instance refused a connection to the protection agent. (ID 30172 Details:
    Internal error code: 0x80990F85)
     More information
    Recommended action: This can happen if the SQL Server process is overloaded, or running short of memory. Please ensure that you are able to successfully run transactions against the SQL database in question and then retry the failed job.
     Create a recovery point...
    Resolution: To dismiss the alert, click below
     Inactivate alert
    I have checked the cluster node this particular SQL instance is running on using Perfmon and the machine is nowhere near capacity on CPU, memory, network, or Disk I/O.  I have failed this SQL Application to another node in the cluster and
    receive the same error (this other node has another clustered SQL application on it that is actively running as well as backing up fine).  The only thing that I am aware of that has changed is that we installed SP2 for SQL 2008 about 2 weeks prior
    to when the failures started to occur.  However, we updated all six clustered SQL Instances at the same time and only this one is having this issue so I don't believe that caused the problem.  We are running SQL 2008 SP2 (version 10.0.4000.0)
    on all clustered instances along with DPM 2010 (version 3.0.7696.0) on this particular DPM server that has the issue.
    One last thing, I have also noticed errors in the event log pertaining to the same SQL backups that are failing (but the time stamps are not concurrent with each backup attempt):
    Log Name:      Application
    Source:        MSDPM
    Date:          6/13/2011 1:09:12 AM
    Event ID:      4223
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      KEN-PROD-BS002.aarons.aaronrents.com
    Description:
    The description for Event ID 4223 from source MSDPM cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
    1) No valid recovery points present on the replica.
    2) Failure of the last express full backup job for the datasource.
    3) Failure while deleting the invalid incremental recovery points on the replica.
    Problem Details:
    <DpmWriterEvent><__System><ID>30</ID><Seq>1833</Seq><TimeCreated>6/13/2011 5:09:12 AM</TimeCreated><Source>f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp</Source><Line>815</Line><HasError>True</HasError></__System><DetailedCode>-2147212300</DetailedCode></DpmWriterEvent>
    the message resource is present but the message is not found in the string/message table
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSDPM" />
        <EventID Qualifiers="0">4223</EventID>
        <Level>2</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-06-13T05:09:12.000000000Z" />
        <EventRecordID>68785</EventRecordID>
        <Channel>Application</Channel>
        <Computer>KEN-PROD-BS002.aarons.aaronrents.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DPM writer was unable to snapshot the replica of KEN-PROD-VDB001\POSREPL1\model. This may be due to:
    1) No valid recovery points present on the replica.
    2) Failure of the last express full backup job for the datasource.
    3) Failure while deleting the invalid incremental recovery points on the replica.
    Problem Details:
    &lt;DpmWriterEvent&gt;&lt;__System&gt;&lt;ID&gt;30&lt;/ID&gt;&lt;Seq&gt;1833&lt;/Seq&gt;&lt;TimeCreated&gt;6/13/2011 5:09:12 AM&lt;/TimeCreated&gt;&lt;Source&gt;f:\dpmv3_rtm\private\product\tapebackup\dpswriter\vssfunctionality.cpp&lt;/Source&gt;&lt;Line&gt;815&lt;/Line&gt;&lt;HasError&gt;True&lt;/HasError&gt;&lt;/__System&gt;&lt;DetailedCode&gt;-2147212300&lt;/DetailedCode&gt;&lt;/DpmWriterEvent&gt;
    </Data>
        <Binary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inary>
      </EventData>
    </Event>
    Any help would be greatly appreciated!

    Don't know if this helps or not, but I also noticed another peculiar issue that is derived from this problem.  If I go to "Modify protection group", then expand the cluster, then expand all six nodes in the cluster, five of them show "All SQL Servers"
    and allow me to expand the SQL Instance and show all databases; the one that is having a problem backing up, when I expand the node, doesn't even show that SQL exists on the node, when in fact, it does.
    I would also like to add that the databases on this node that will not backup are running fine.  They run hundreds of transactions daily so we know SQL itself is OK.  Even though it is a busy SQL Server, there is plenty of available resources as
    the SQL buffer and memory counters show the node is not under durress.

  • SQL Server Error when tryingt to install the CMS DB on SQL Server 2005 x64

    I am trying to install BOEXI R3 on w2k3 64-bit OS in a SQL Server 2005 x64 database, I am currently at the installation step where i Specify an exisiting CMS database. I created a System DSN and tested it, and it was successful. So when I got to the screen where I select my datasource I had to check use trusted connection because the datasource would not show up when Use DSN created by WOW64 option was checked. From there I could select the database I created. Oh yeah, I also made the application server local system account part of my DB admins group so it has full access to the database yet when I click next to connect I get a CMS Database Error: STU000226. here is what I have in my log:
    ThreadID     Message
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: findDFA_LLR:  (CmdLineDir) C:Documents and SettingsgsdadminDesktopBOEXI and BSM AnalyticsBOEXI R3 Full Version from SAPpackagedbcheck
    sqlrule.llr
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: database subsystem only
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: loading libary succeeded
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Init()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:96): trace message: Creating the shared CWireObject::PropertyNameMap
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:118): trace message: Setting static property map
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:125): trace message: CWireObject::InitializeStaticPropertyMap() - reference count: 1
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: initializing subsystem succeeded
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: Loading: done loading subsystem - database subsystem only
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Connect()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.DBConnectionManager.cpp:802): trace message: DBConnectionManager - Setting total target number of connections for pool 0 to 1.
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.SQLServerDatabase.cpp:119): trace message: SQLServer error found:  ErrorMessage( (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified), ErrorCode(0)
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.dbutils.cpp:820): trace message: Caught DatabaseSubystem Error: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOEXI_CMS". Reason:  (Microsoft)[ODBC Driver Manager] Data source name not found and no default driver specified
    (Thu Apr 23 20:57:46 2009)     3024     3028     trace message: DatabaseSubsystem::Shutdown()
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:175): trace message: CWireObject::TerminateStaticPropertyMap() - reference count: 1
    (Thu Apr 23 20:57:46 2009)     3024     3028     (.wireobinit.cpp:182): trace message: Releasing
    static property map
    How do I get past this?

    The workaround was, I installed the SQL Server Client tools and created a System DataSource  and then had to create a user DataSource  (it is a quirk in the installer I guess) to get past this point in the installation. Now I have an even bigger problem. Everything but the CMS installed and the installer hung at the "Configuring the CMS" part. The installation finished but when I tried to log into the Central managment console I got this error:
    Error: Server GSD-RRPT-RDC:6400 not found or server may be down (FWM 01003) null
    I looked at the forums for the cause of this error and came to the conclusion that BOEXI does not support an installation on SQL Server 2005 when using Integrated Authentication to the SQL Server. See the engineers here disabled SQL Authentication for the SQL Server and  will not allow it.
    Is this true? Or is there a workaround to install the CMS using Integrated Authentication in the DataSource ?
    Thanks.

  • How much memory does SQL Server 2008R2 Standard use on Windows Server 2008 R2 64-bit?

    Hi,
    can anyone tell me how much RAM will really be used by SQL Server?
    72 GB are currently installed. As Windows is only able to use 32 GB is SQL Server able to use the other 40GB + the unused part of the first 32 GB?
    Thank you very much!
    BR Matthias

    Sorry, I don´t understand your post ?!
    Maybe the question is if SQL Server is able to allocate more memory than the installed Windows Version is able to?
    Since your OS is Windows Standard edition(X64) it cannot use or a process running cannot use more than 32 G of memory.
    Now SQL server can use as much memory possible but it is now limited by Windows as your OS can only see 32 G.So it would be good part from your side to go to sp_configure and set 25 G for SQL server and can leave rest for OS( it just a figure not a actual
    value i have given,actual you have to calculate by yourself or refer to below link) .
    http://mssqlwiki.com/2013/04/22/max-server-memory-do-i-need-to-configure/
    As Andrew said after 32 G what ever memory you put it is waste.
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Connecting to SQL Server from Solaris using Perl & Oracle.

    Hey All,
    Using the DBI.pm provided by the default Perl package that comes integrated with Oracle server, I am being able to connect to the Oracle database through Perl.
    But is there a way I can connect to SQL Server through Perl using any package provided by Oracle like ODBC or something else (on Solaris)
    I am using following version of Oracle server on Solaris 10
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    TIA
    Parag

    The problem is I cannot install any third party package but I found something. Have a look at this:
    bash-3.00$ pwd
    /opt/oracle/product/10.2.0.4.0/perl/lib/site_perl/5.8.3/sun4-solaris-thread-multi/Win32
    bash-3.00$ ls -l
    total 10
    -rwxr-xr-x 1 oracle dba 4532 Jul 7 2004 DBIODBC.pm
    bash-3.00$
    Will explore more and keep you all posted.
    Cheers,
    Parag

  • Cannot complete your request because the database is being refreshed

    I created provisioned one user in Shared Services and then assigned to a group. After this I went to workspace in advance mode in order to manage security filters, the user does not appear and when I try to "create" an existing user, an error appears: Cannot complete your request because the database is being refreshed
    I'm not running any refresh in the database and my EAS does not show anything. What could be happening? It is Hyperion Planning 11.1.1.3
    Regards,

    Than you John,
    I executed the cmd and this appeared after entering the password, I understand that the application has been unlocked, doesn't it?
    [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
    [INFO] RegistryLogger - REGISTRY LOG INITIALIZED
    D:\Hyperion\common\config\9.5.0.0\product\planning\9.5.0.0\planning_1.xml
    displayName = Planning
    componentTypes =
    priority = 50
    version = 9.5.0.0
    build = 1
    location = D:\Hyperion\products\Planning
    taskSequence =
    task =
    *******D:\Hyperion\common\config\9.5.0.0\registry.properties
    using Java property for Hyperion Home D:\Hyperion
    Setting Arbor path to: D:\Hyperion\common\EssbaseRTC\9.5.0.0
    Setting HBR Mode to: 2
    =2013-11-06 11:07:30,926 WARN main com.hyperion.hbr.security.HbrSecurityAPI - Er
    ror retrieving user by identity
    d{ISO8601} WARN main com.hyperion.hbr.security.HbrSecurityAPI - Error retrieving
    user by identity
    Embedded HBR initialized.
    d{ISO8601} INFO main com.hyperion.audit.client.runtime.AuditRuntime - Audit Clie
    nt has been created for the server http://stlwlahyapprd01.na.ds.monsanto.com:280
    80/interop/Audit
    Reaquired task list lease: Wed Nov 06 11:07:31 CST 2013: 1383757651285
    The application has been successfully unlocked
    d{ISO8601} INFO pinging com.hyperion.audit.client.cache.AuditConfigFilter - Clie
    nt Enable Status false
    d{ISO8601} INFO Thread-22 com.hyperion.audit.client.cache.AuditConfigFilter - Cl
    ient Enable Status false
    d{ISO8601} INFO filterConfig com.hyperion.audit.client.cache.AuditConfigFilter -
    Client Enable Status false

Maybe you are looking for