SQL to check date and send email and Update Record

Hii,
USING ASP AND ACCESS
I am implementing a classified section for my website and I
am displaying
everything successfully.
When the user posts the classified he selects how many days
he wants his
POST like 10 days, 20 days or 30 days and i can successfully
show the posts
So if the user posts on says 1st of July 2006 and selects 10
days for his
post to be showed on my website
THEN
8th July 2006 an email shud go to him saying if he wants to
keep his POST
for another 10 days, 20 days or 30 days with 3 links
and IF YES the 1st july 2006 date must be changed to
Date of Post + Number of days selected initially + Number of
days selected.
I am using two columsn in the DB for this date thing one is
the strPostDate
and strAddDate
So basically the number of days selected for the post to be
shown on the
website keeps adding up each time the user clicks on the link
for 10 days,
20 days or 30 days with 3 links
please help need it badly :-)

Hi,<br />How is the date format in the toolbox control panel?<br /><[email protected]> wrote in message <br />news:[email protected]..<br />> OK, my bad. It is doing it as a yyyy-mm-dd format. Which is what I want. <br />> However, if I do go to update the page the good news is the correct date <br />> is in there in the correct format. However, if I click on the date picker, <br />> it starts out as April, 2192 and the scroll bar is over part of the <br />> Thursday dates in the calendar. This is on Firefox/Mac.<br />><br />> Also if I click on the Update Record/Submit button at the bottom of the <br />> page, I get an error saying 'The date format is: mm/dd/yy' which is the <br />> real bug. Sorry for the mixup.

Similar Messages

  • Sending email since updating.  I get password not correct.  Won't send unless I go to outbox and send again.  HELP!

    Sending email since updating.  I get password not correct.  Won't send unless I go to outbox and send again.  HELP!

    Hey Horse farm,
    Thanks for the question. I understand that you are experiencing issues sending mail on your iPad. The following resource may provide a solution, specifically deleting and re-adding the account:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Try these basic troubleshooting steps first
    1. Tap Safari and attempt to load a webpage (try any webpage). If you can load a webpage, then your device has Internet access. If you are unable to load a webpage,follow these troubleshooting steps.
              - Try to use an alternate Internet connection if available:
                        1. Try a different Wi-Fi connection
                        2. If your iOS device has an active cellular data plan, tap Settings > Wi-Fiand turn off Wi-Fi.
                        3. If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
    2. Log in to your email provider's website to ensure that the account is active and the password is correct.
    3. Restart your iOS device.
    4. Delete the affected email account from your device.
              - Tap Settings > Mail, Contacts, Calendars.
              - Choose the affected email account, then tap Delete Account.
              - Add your account again.
    * If you are only able to use your email account while connected to your home network, this may be a limitation put in place by your email service provider. For further support, please contact your email service provider directly.
    Thanks,
    Matt M.

  • Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

    Hello everybody,
    Can help anyone to resolve my problem.
    I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4        When I disconect AC power and remove battery and connect again, I see this message on screen:
    "Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
    Press Esc to continue or F1 to enter Setup"
    Is this a system board problem or CMOS battery problem ?
    Thank you

    Hello and welcome,
    It's probably (hopefully) just the CMOS battery.  The easiest way to find out is to just replace that battery.
    Page 85 of the Hardware Maintenance Manual:
    Hardware Maintenance Manual
    Here's an example of the battery.  I'm not recommending (or not) this vendor:
    http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Error: 0271: Real Time Clock Error - Check Date and Time settings.

    Hello all,
    I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
    Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
    Any advice would be appreciated.

    Thanks to everyone for the help.  Just want to close this out.  I had a IBM/Lenovo technician here today and he replaced the CMOS battery.  Upon the change, the computer is fine being reconnected to the dock (the three times I tried it).  So it has been resolved with the battery.  Surprised by the incompatibility claim because I am not having issues now.  Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
    Thanks!

  • When I try to buy app's it says please check date and time?

    When I try to buy app's it says my IPOD says check date and time?

    Does the iPod have the correct time and date?
    Next try resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears

  • Equium M40X - error message at start up; 0271: Check date and time settings

    Hi when I start the laptop the message appears:
    ERROR
    0271: Check date and time settings
    WARNING
    0251: System CMOS checksum bad - Default configuration used
    Press <F1> to resume, <F2> to Setup
    I would assume this is because my CMOS battery has had it? Is this a know issue with this laptop and how do you get at it to replace it?

    Hi
    It sounds as though your notebook has the wrong time in the CMOS (BIOS).
    If you can get into the BIOS, check the date and time settings and make sure they are correct.
    It may also be a case of the CMOS battery going out. When this happens your notebook will tend to not keep the correct time.
    In such case you should connect the AC adaptor and should leave it connected for about 20-24 hours. At the end of this period the CMOS battery should be fully charged.
    Good luck and best regards

  • Check each and every record during update/delete

    Hi,
    I have forms 10g I made one tabuler form and want to apply certain restrictions like after two days update or deletes are not allowed how can I check this for each and every record in tabuler form during updation/deletion.
    2- If the record does not meet my criteria how can I skip saving/updating record.
    Thanks in advance.
    Khawar
    Message was edited by:
    S. Khawar

    As you already storing the data for created date/time, it’s quite easy now to check date/time before deleting or updating
    Need 2 triggers to write on the specific block.
    1)     PRE-INSERT
    2)     PRE-DELETE
    The Trigger code as follows in both triggers
    Declare
         No_Days Number;
    Begin
         Select Nvl(Trunc (Sysdate - Created_datetime),0)
         Into No_Days
         From <Table Name>
         Where :<Form Column Name> = <DB Column Name>
    If No_Days >= 2 then
    Raise Form_Trigger_Failure;
    End If;
    End;
    Cheers
    Ayaz

  • Need help to insert and update records in MDM

    Hi ,
    I am trying to develop an webdynpro application which can create and update records in tables of a repository of MDM . For example .. I want to insert values and later update values in Vendor table.
    I am new to webdynpro and MDM. If any one can help step by step or can send a sample code which I can be ready to use that would be great help.
    If anyone can have a sample code .. kindly mail to "[email protected]"
    It is urgent. Please help.
    Regards,
    Niraj
    Edited by: Niraj Kumar on May 23, 2008 6:50 AM

    Hi Niraj,
    Are u going to work with webdynpro Java/ABAP?
    some materials which are found useful are sent.
    Cheers,
    Mary

  • Go to detail page and update record at the same time

    Hi guys,
    I`m very new to dreamweaver and have no coding skills, so
    please be gentle.
    I`m have created a mail box and it all works fine, the
    problem i`m having is that I want to be able to tag wether a
    message has been read or not.
    So the subject has to be a link so when someone clicks the
    subject you are redirected to the read message page and it displays
    the message in full.
    My question is there a way to go to detail page and update
    record at the same time?
    I`m using ASP and the mysql read or not field is a SET

    "mrmidjam" <[email protected]> wrote in
    message
    news:fghrpf$7s2$[email protected]..
    > Hi guys,
    >
    > I`m very new to dreamweaver and have no coding skills,
    so please be
    > gentle.
    >
    > I`m have created a mail box and it all works fine, the
    problem i`m having
    > is
    > that I want to be able to tag wether a message has been
    read or not.
    >
    > So the subject has to be a link so when someone clicks
    the subject you are
    > redirected to the read message page and it displays the
    message in full.
    >
    > My question is there a way to go to detail page and
    update record at the
    > same
    > time?
    You can use the Update Record ZerverBehavrior and then have
    it redirect to
    the detailpage.
    Joris

  • BPC-Add in "Action"  between 'Send data" and "Update Tables"

    Hi all,
    After the click of "Send data" ,I want to take some CHECK before the data is updated in Database tables.
    Note that this kind of CHECKs are much beyond the function of VALIDATIONs( standard function delivered by BPC).
    So could I write some scripts( in v 5.1) to do such tasks. And how to get the eaxct Dimension/Memeber/Values in this input schedule, since I will base on these data to take checking ?
    Thanks very much.

    Yes this is done all the time.
    Create a button on the template and add a macro behind it.
    Use one of the BPC macros that suite your needs to send data.
    You can find more information in the online help or the BPC office user guide.
    MNU_eSUBMIT_REFRESHINPUTCELL Refreshes EvSND - cells in an input schedule.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_NOACTION - Sends data without clearing or refreshing.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_CLEAR - Sends data and clears input cells.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_REFRESH - Sends data and refreshes the worksheet.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_CLEARANDREFRESH - Sends data and clears and refreshes the worksheet.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_NOACTION - Sends data without clearing or refreshing the worksheet.
    This is just a few.
    Also;
    BEFORE_SEND
    You use the BEFORE_SEND function to execute a custom operation before OutlookSoft for Excel sends
    data.
    Function BEFORE_SEND(Argument As String)
    MsgBox Argument
    BEFORE_SEND = True
    End Function
    AFTER_SEND
    You use the AFTER_SEND function to execute a custom operation after OutlookSoft for Excel sends data.
    Function AFTER_SEND(Argument As String)
    MsgBox Argument
    AFTER_SEND = True
    End Function

  • I can't send emails after updating my iphone 5 today, i'm with talktalk, i can recieve emails and my wifi is working fine

    I updated my iphone 5 today to ios7.1 and now i can't send emails. I can recieve mail, . I'm with Talktalk, and the wifi etc is working fine.
    the message i'm getting is The connection to the outgoing server 'smtp.talktalk.net' failed. I've tried turning my phone off and back on again but no change, Any suggestions? thanks

    Thanks Allan , I deleted and re installed my email account and it seems to have worked. Brilliant phew!

  • Check date and check order

    Dear Experts,
    Fairly general question.
    A check instruction can have av. check first and alloc check next and vice versa.. with no apparent difference in results of the confirmed quantity in either case. (unless we bring in rules and remaning requirement logic that I am not at the moment).
    There is small and sensible requirement.
    I want to confirm a sales requirement against remaining allocation at a different date vis-a-vis actual availability check date (mbdat) against ATP quantity. For simplicity assume there is no b/w and f/w consumption in allocation design.
    SAP help says this is controllable such in standard. but I want to know what could be the possible side effects and any other possible interpretation of such a design...keeping in mind this is change on top of live system where pre-sales and sales documents consume allocations without a strong concept of scheduling (within the check framework). Could this have any bearing on the order of check steps i.e. if I want to check allocations at a date earlier than material availability date, should Allocation check be the first step. I need to set up a hell lot to verify all this. help.com has no such re-assuring statement that I could locate.Hence looking for first cut answers from your experiences.
    Business context: I want to check remaining allocated quantity on "scheduled" goods issue date as opposed to material availability date which is scheduled backwards from customer requested date. The reason being the customer has been promised a certain shipping date based on a auction he won. This means that being able to meet shipping date is more important than being able to meet scheduled delivery date. This is true of not all sales scenarios but only some. Moreover we take allocations seriously because that is the very basis for production planning from the limited raw materials from nature
    Regards,
    Loknath

    Loknath,
    I don't really understand most of what you have asked.  You have stated it all as theory and not given any concrete examples of how you would like the system to react under various scenarios.  However, I will answer as many questions as I can.
    I need to set up a hell lot to verify all this
    ???? provided you already have a working SCM product check configured, and provided you do not have to create a custom characteristics, you can set up and test a single sequence combination alloc/product check ATP in less than a working day.  Once set up, you can switch the allocation/product check sequence in your check instructions in seconds.  The total amount of work will be the same, regardless of which sequence you end up using.  This is work you will have to do anyway to implement allocation.  If you check your planning area directly during development, you can vastly reduce the amount of time you spend on testing your theories.  In a day you will have created 90% of the final solution, and you will have tested multiple theories and scenarios.  The only wasted effort would be if you decided to abandon allocation altogether.
    if I want to check allocations at a date earlier than material availability date
    ??? of the 3 dates available, MAD is the earliest.  What date do you intend to check that is earlier than MAD?
    I want to check remaining allocated quantity on "scheduled" goods issue date as opposed to material availability date which is scheduled backwards from customer requested date.
    ???  Both dates (GID & MAD) are scheduled backward from delivery date.
    There is nothing inherently right or wrong in using any of the 3 dates (MAD/GID/DelivDat).  When you are setting up your allocation quantities, you need to set them up in terms of the date within the sales order that you will be checking.  All the dates in your planning book will represent one of the three dates, as configured in your allocation group.
    The most common reason to implement allocation is that order entry is expected to be far in excess of capacity. Under these conditions, when I set up allocation, I usually set up Allocation first, then product check.  I do this mostly to limit system load during backorder processing, since in most allocation situations, more orders will fail allocation check than will fail product check.  The product check on these orders never gets executed.
    Best Regards,
    DB49

  • Where can I find the latest version number in a document in the web? so I can download it with wget to check if the current installed firefox version is up to date and update ir if necessary?

    My problem is that I can't find the latest version number in here http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest/win32 as a document, so I can check against "HKLM\SOFTWARE\Mozilla\Mozilla Firefox\CurrentVersion" and update or not, all this is done by a script. It will be great not have to change the versión number in the script every time there is a new release.
    Thanks

    I think I solved, all I have to do is this:
    //here I download the entire page
    wget.exe http://www.mozilla.org/en-US/firefox/all.html -O index
    //here I search for the word curVersion and set a variable with the result, which is "10.0.2"
    for /f "tokens=3 delims=</> " %%A IN ('type index ^| FIND /I "curVersion" ' ) do set latestversion=%%A
    //here I just make sure I get a number
    echo "%latestversion%"
    pause
    Later I check it against the registry and voila! I hope this can help other admins who have the same problem.
    Regards.

  • Reminder Workflow does not recalculate new date to send email, if due date is changed

    I created a basic reminder workflow using due date, and status column. it works well.
    Let's say, I want to send a reminder email 2 days prior to the due date.
    I used Add -2 to due date and set a variable
    then used Pause variable
    if status is not equal to completed
    then send email
    And I have this set to initiate when a new item is created, and modified.
    However, if the due date is changed, it does not recalculate the new date to send the reminder email.  Help!

    Hi MonalisaM,
    The in-progress workflow instance will be unable to re-start itself when list item is modified, but I think you can design workflow with using the second workflow to update the list item one filed, then this update triggers
    the first workflow again.
    Stop this reminder workflow (first workflow) when due date is changed, then this will trigger the second workflow to change another custom column(e.g. Flag), then the first workflow will be triggered due to this custom column
    Flag value changed by second workflow, I mean the second workflow is used to upadate this custom list item one filed(e.g. Flag) in order to trigger the reminder workflow(first workflow).
    You can read the following article for more information to understand how to make the first workflow re-start by using second workflow.
    http://sharepoint713.blogspot.com/2011/09/sharepoint-designer-workflow-to-send.html
    Thanks
    Daniel Yang
    TechNet Community Support

  • SQL Load Queries - Trailer and Header record

    I have a data file which comes with a header and a Trailer record.
    We are using SQL load to load it.
    Is a way to ignore the header and the trailer records.
    Any help around this is highly appreciated.

    user532091 wrote:
    Is a way to ignore the header and the trailer records.Assuming number of records in header is known, use SQL*Loader parameter
    SKIP nwhere n is number of records in your header. Trailer is a different story. There is nothing built-in to handle trailer, so best solution is to remove trailer on OS level. Other than that, you can try SQL*Loader clause WHEN. For example, if triler row is something like:
    TOTAL SIZE nnnnnnyou can use:
    WHEN position(1,10) != 'TOTAL SIZE'
    obviously, assuming non-trailer records can't start with TOTAL SIZE.
    SY.

Maybe you are looking for

  • Which table in SRM give the date of confirmations and invoices done in R/3

    Hi all, I'm loocking on SRM to find a table (or smthg else) which is updated when a PO has a confirmation or an invoice MADE IN R/3. I'm sure it's existing as in the web we can see in the document history, but I can't find a table in SRM that can tel

  • Launch a browser from a application.

    I know about AppletContext.showDocument, but is there any method for applications to launch a web browser in a similar platform independant manner? If so is there also the ability to specify the browser has no address bar/toolbars etc? The JNLP packa

  • HRMS APP-PER-52803:Your business group does not match your security profile

    I see this as a common problem, please guide me as to what should be done to rectify it. While opening \Payroll\Description, it gives message as under: HRMS APP-PER-52803:Your business group does not match your security profile Regards Nemo

  • Enforce static Singleton from Abstract/Interface??

    Hi, I'm trying to describe an interface IMyInterface which enforces all concrete subclass implementations to have a singleton "getInstance()" method whose method signature is always this "getInstance". So declaring the interface Interface IMyInterfac

  • Where to store stateless session bean reference?

    Hi, I am currently writing my first ejb-jar <-> web app pair of applications. Thanks to EJB3.0 and J2EE5 the ejb part was quite easy to learn. J2EE has become a really cool platform in its recent version. On the Web Application side I have the follow