SQR reporting error message

While trying to connect to a few databases that had worked fine just a few minutes before, I am getting the following error message :
Connect Failed: Driver Error Message : [Microsoft][ODBC drive manager] data source name not found and no default driver specified.
has anyone had the same problem or anyone with a suggestion to dela with it?

Your ODBC connection is either defined wrong, corrupted, or cannot be discovered.
Sometimes recreating the connection can solve the problem.
Check also that you are using the SQR supplied Merrant drivers, and define the ODBC connection as a system data source, not a user data source.

Similar Messages

  • Report Error Message in BPM Alert?

    Hi,
    I designed a BPM with a transformation step and a send step. For each step I have an exception branch where I want to trigger an alert, when something goes wrong.
    I already configured in TC ALRTCATDEF an alert category (Dynamic Text activated). And I made an container operatinon with folloing control step, where I for example report the message ID.
    But, going through the blogs and threads I didn't find the information, how I can report the exact error message, the error category (and in case of the send step the adapter and the adapter error text) to the alert. How can I get this data to put it into a container variable?
    Can anybody give me some information about that?
    Thanks in advance
    Dominic
    System: PI 7.0 SP15

    You can use the below information for raising an Alert for adapters.
    Specific Error Information from the Adapter Engine:
    Container Element
    ABAP Dictionary Data Type
    Meaning
    SXMS_TO_ADAPTER_TYPE
    CHAR70
    Adapter type
    SXMS_TO_ADAPTER_ERRTXT
    CHAR70
    Error text from the Adapter Engine
    Refer the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

  • Payment not possible because of reported error Message no. FZ311

    i am a fresher in FI module... kidly give the solution  how to solve the error in automatic payment program..f110...
    i have attached my log here....
    Job log overview for job:
    F110-20140315-A1    -X / 13365701
    Date
    Time
    Message text
    Message class
    Message no.
    Message type
    ABAP program
    Screen no.
    15.03.2014
    13:36:59
    Job started
         00
        516
         S
    15.03.2014
    13:36:59
    Step 001 started (program SAPF110S, variant &0000000002023, user ID RAGU)
         00
        550
         S
    15.03.2014
    13:37:00
    Log for proposal run for payment on 15.03.2014, identification A1
         FZ
        402
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    > Additional log for vendor 100263 company code ALRF
         FZ
        691
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    >
    Due date determination additional log
         FZ
        799
         S
    15.03.2014
    13:37:04
    >
    Document 6
    004 line item 001 via INR      200.000,00-
         FZ
        700
         S
    15.03.2014
    13:37:04
    > Terms of payment: 15.03.2014    0  0,000 % 0  0,000 %    0
         FZ
        701
         S
    15.03.2014
    13:37:04
    >  00 days grace period is being considered
         FZ
        726
         S
    15.03.2014
    13:37:04
    >   Payment must take place before 15.03.2014; next payment on 16.03.2014
         FZ
        728
         S
    15.03.2014
    13:37:04
    > Item is due with 0,000 % cash discount
         FZ
        721
         S
    15.03.2014
    13:37:04
    >
         FZ
        693
         S
    15.03.2014
    13:37:04
    >
    Payment method selection additional log
         FZ
        699
         S
    15.03.2014
    13:37:04
    >
    Payment me
    thod selection for items due now to the amount of INR      200.000,00-
         FZ
        601
         S
    15.03.2014
    13:37:04
    > Payment method "C" is being checked
         FZ
        603
         S
    15.03.2014
    13:37:04
    > Street or P.O. box entry is missing
         FZ
        617
         S
    15.03.2014
    13:37:04
    > No permitted payment method exists
         FZ
        608
         S
    15.03.2014
    13:37:04
    Information re. vendor 100263 / paying company code ALRF ...
         FZ
        305
         S
    15.03.2014
    13:37:04
    ... payment not possible because of reported error
         FZ
        311
         S
    15.03.2014
    13:37:05
    End of log
         FZ
        398
         S
    15.03.2014
    13:37:06
    Job finished
         00
        517
         S

    Hello Experts,
    I am blocked with a strange issue which is similar to FZ311 mentioned above.
    Enclosing the screenshot for your reference.
    I am bit confused whether anything needs to be configured within the FBZP or it is purely the vendor master data .
    Any help will be appreciated.
    Kind Regards,
    Sanjay

  • Financial Reports error message Java API can't connect to olap

    Hi,
    On version 11.1.1.3, after reapplication of 11.1.1.3 because of other problems with shared services, get the following message on the diagnostics for the financial reporting server.
    Launch external checker with next command: E:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect admin ****** hypolap.msj.org http://hypapp2.msj.org:13080/aps/JAPI
    Error: Result: -1; Error message: Cannot connect to olap service. Cannot connect to Essbase Server. Error:Essbase Error(1051293): Login fails due to invalid login credentials
    Recommended Action: Make sure external checker is working.
    Financial reports over the Web can not connect to the essbase server. Financial reports through the studio works fine. Any suggestions how to troubleshoot or resolve the issue with the login credentials for the Java API to essbase?
    Anne

    Things to check -
    1) Does the user you specified in the connection have the role OLAP_USER
    2) Does the user you specified in the connection have access to an OLAP schema (analytic workspace or CWM2 ROLAP schema)
    3) Have you installed the correct JDBC files from your database instance into the BI Beans JDBC directory
    Keith Laker
    Oracle EMEA Consulting
    BI Blog: http://oraclebi.blogspot.com/
    DM Blog: http://oracledmt.blogspot.com/
    BI on Oracle: http://www.oracle.com/bi/
    BI on OTN: http://www.oracle.com/technology/products/bi/
    BI Samples: http://www.oracle.com/technology/products/bi/samples/

  • Reports Error Message

    Hi,
    When I click the Reports icon then select a report from our DEV environment, I get this error message from a window that pops up:
    Error:Some of the required arguments are missing.
    Please contact your systems administrator.
    This happens in this environment only. I already tried to bounce the Actuate HTTP Services 8 and Actuate Process Management Daemon 8 from services but still not working.
    Appreciate any comments/suggestions from anybody who also experienced this.
    Thanks,
    Jasmin

    What version of Siebel are you using?
    Have you set up the Report Server parameters for the Object Manager component in your Dev environment?
    http://download.oracle.com/docs/cd/B31104_02/books/SiebInstUNIX/SiebInstCOM_InstReports14.html
    Regards,
    mroshaw

  • XL Reporter Error Message

    Hi Experts,
                      i am using SAP B1  8.8 pl 08 and sql server 2008 and office 2003.While executing the EXCEL report i am getting following error message
    Unable to connect to XL Reporter.
    Error! Server communication failed!
    Cause: Server IBM-SAP_SERVER
    The connect information provided in Metainfo.xml is wrong.
    (Please contact the administrator to run ChangeDBPassword)
    how could i resolve this problem?
    Thanks

    hi,
    C:\Program Files\SAP\SAP Business One\AddOns\XLR\XLReporter ,there is fine connection manager,open that file and change connection settings.it will work fine.
    Thanks,
    Neetu

  • ZRS Cool Solutions Report - Error Message

    We have uploaded a Cool Solutions report entitled 'Licensed Products Allocation' to our ZRS, and I am getting an error message ('Error executing SQL statement for : report3
    ORA-01858: a non-numeric character was found where a numeric was expected'). We have an Oracle DB back end and are running ZRS 5.
    Can someone help me to get it to work please?
    It was uploaded by vsuneetha on 17th Sept 2014.
    Any help would be much appreciated.
    Adam Davies
    Cardiff University

    Originally Posted by DaviesAR8
    We have uploaded a Cool Solutions report entitled 'Licensed Products Allocation' to our ZRS, and I am getting an error message ('Error executing SQL statement for : report3
    ORA-01858: a non-numeric character was found where a numeric was expected'). We have an Oracle DB back end and are running ZRS 5.
    Can someone help me to get it to work please?
    It was uploaded by vsuneetha on 17th Sept 2014.
    Any help would be much appreciated.
    Adam Davies
    Cardiff University
    Maybe worth to add a comment on the cool solutions article then the author will get a mail notification and maybe he can help?
    Thomas

  • To Report Error message in oracle website search option

    I have encountered an error message in oracle website search option. There was some compilation error in their JSP pages I did not know how to inform the Otn team. Can any one please guide me.
    regards,
    sagar

    You can use the below information for raising an Alert for adapters.
    Specific Error Information from the Adapter Engine:
    Container Element
    ABAP Dictionary Data Type
    Meaning
    SXMS_TO_ADAPTER_TYPE
    CHAR70
    Adapter type
    SXMS_TO_ADAPTER_ERRTXT
    CHAR70
    Error text from the Adapter Engine
    Refer the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

  • Sqr report error

    Hi ,
    i was trying to generate one report from SQR studio, i am getting the following message.
    "failed to produce the HTML output file .additionally ,no,Spf,/LOG, ot .ERR files were generated.most likely causes include:SQR configuration,and the BRB datasource definition used for this report"
    I hv only reporting client set on my windows desktop
    please throw some light on the above
    Thanks
    kishore
    Edited by: user10834831 on Feb 13, 2009 2:46 AM

    Hi,
    To access the IR, FR, SQR & Dashboard studios, you need to install the BI + client. There is no URL to access these tools.
    When you will install the BI + client software, it will install the studios of IR, FR, PR (SQR), Dashboard builder on your machine.
    Web Analysis, workspace, Shared services are access by URL only. As these are the web interfaces for the users.
    For EAS, you can access it via the URL or using admin console (Essbase administrator services-client tool). You need to install this client software on your machine.
    Hope it will help you.
    Thanks & Regards,
    Mohit Jain

  • Crystal Report Error Message

    I searched first for this error and did not see anything...
    One (very useful) Crystal Report I've created work well then one day I'll get:
    Failed to open rowset.
    Details: S0000(ProvideX)(ODBC Driver)(FileIO)No data dictionary found for specified database
    (Parentheses are actually brackets but don't "Preview" as such.)
    I've tried re-establishing the database in Database Source and still nothing.  I can re-create it
    from scratch and it works fine again, then bang - the above error.  I first use the BI Reporter to
    setup the report, then switch to Crystal to edit and format it.  This works fine for many other
    reports created.
    Any help or direction is greatly appreciated.
    Thanks,
    Dave

    1.Exactly at what stage or step do you get the error.
    2.Does is point to a specific formula/object at this stage.
    2.What is the crystal reports version(Help>>About Crystal Reports)
    3.Database type and version.Database driver name and version.
    4.What happens if a new report is created using the same odbc connection.
    5. Has anything changed at the databse end.

  • Project Summary and Base Calendar Reports Error Message when Saving to Desktop from Server

    We have a user that gets the following popup when she attempts to save file from the Server to her desktop:
     "The Project Summary and Base Calendar reports cannot be opened, renamed, or deleted".  The popup includes a red circle with a white "X" and an "OK" button.  The OK button must be clicked 27 times
    before the file will eventually save to the desktop.
    I have been able to replicate this error when I try to save her file to my desktop, as well.
    I can see from the Organizer that the Project Summary and Base Calendar reports are part of the Global, but not part of the file-specific reports while on the Server.  This is true for other schedules in our enterprise, so I am not sure why this is
    occurring.  After performing the save and clicking "OK" 27 times, there is exactly 27 reports listed for this file in the Organizer, but the Project Summary and Base Calendar reports are the only two that did not transfer with the file.
    What is going on here and why is it happening for just this file?  It feels like we are getting into a contention issue between the local Global.MPT and the Enterprise Global.
    We are on Project Server v2010 SP2.

    Thanks for your feedback Chris!
    When you open the organizer, check that you don't have for the project in question any enterprise object on the project side.
    Have you installed the
    latest PS2010 CU? A more radical way for reparing a file is to export it as an XML file and save/publish it back on Project Server as an MPP file. But the project UID will change thus it will cause trouble
    in case you have timesheets. You could also try to delete the project and restore it (assuming you have the daily backup in place).
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • S_P00_07000134 - Generic Withholding Tax Reporting  - error message

    Hello,
    When i am executing report S_P00_07000134 I am receiving the below errors .
    -  Company code 9300's witholding tax reference number is missing
    -   Unable to print form IDWTCERT_US_1099MISC.
    I am only testing it for one 1099 vendor and one company code .
    Can anyone please help.
    Thanks very much.

    I input the tax reference number in the company code details in add. data.
    When i execute report RFIDYYWT, it still gives me the same error as below :
    27    Company code 9300's witholding tax reference number is missing
    11    Unable to print form IDWTCERT_US_1099MISC.
    Is there anything else to be done besides this.
    Thanks very much.

  • JDBC receiver report error message:  attribute action missing

    Hello Colleagues,
    I am working on a scenario:
    SAP ECC>XI proxy>XI server>JDBC adapter>oracle database.
    SAP ECC is sending a request(SQL query) to get the result from DB.
    The payload is
    ==========================================================================
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:MT_B1_MES_GETMAT_IN xmlns:ns1="http://boe.com.cn/b1/cim">
    - <root>
    - <stmt>
    - <Query action="SQL_QUERY">
      <access>SELECT productspecname AS MATNR, productiontype AS DISGR, SUBSTR(factoryname,1,1) AS SHOP FROM PRODUCTSPEC WHERE activestate = 'Active'</access>
      </Query>
      </stmt>
      </root>
      </ns1:MT_B1_MES_GETMAT_IN>
    ============================================================================
    As you might already seen, the action attribute is there, but i always get the error log:
    Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)
    I searched for the threads in forum but it seems, people get the same error always due to the wrong XML document.
    but i check my xml, it looks right. why still get the "action attribute missing" error...
    Best regards, Charlie Cai

       <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:MT_B1_MES_GETMAT_IN xmlns:ns1="http://boe.com.cn/b1/cim">
    - <root>
    - <stmt>
    - <Query action="SQL_QUERY">
       <access>SELECT productspecname AS MATNR, productiontype AS DISGR, SUBSTR(factoryname,1,1) AS SHOP FROM PRODUCTSPEC WHERE activestate = 'Active'</access>
       </Query>
       </stmt>
       </root>
       </ns1:MT_B1_MES_GETMAT_IN>
    In your query, are you executing Select Statement ?
    For Target JDBC, you can Insert data in table, Update Data in table & Execute Stored Procedures from PI System.
    using Actions
    INSERT
    UPDATE
    EXECUTE.
    Change your scenario Action as per your requirement.
    No idea for ACTION = SQL_QUERY.

  • Asset reports not  generating error message showing

    Dear Guru's
    I  need ur help,   I am not getting  any asset reports,  i run depreciation.  when i am going to generate asset reports in T.code AR02  and S_ALR_ series reports  error message showing "Fiscal year not yet made change",    I closed fiscal year and open new fiscal year.  I am  not getting any asset reports from assets purchased ,     
    Client fiscal year is Calender year,   In 2004  fiscal year all assets updated in sap that  fiscal year also i am not getting reports. i run deprecial upto 2006. 
    Pls help me this is very urget
    Thanks & Regards
    Satish

    Is correct,
    The current fiscal year should be open othere wise it is not possible to run reports.
    You can have only 2 years open
    Run depreciation  fiscal year xxxx (when there are assets for depreciation)
    close old fiscal year xxxx
    open fiscal year  xxxxx
    Here you found how to do this
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/asset+accounting

  • How to show error message on page #NOTIFICATION_MESSAGE#?

    Hi,
    Is it possible to show error message on a page, where apex substitutes #NOTIFICATION_MESSAGE# at page template, with a javascript call? My requirement is to report error messages which i get from ondemand process, these on-demand processes were called from my javascript code. If any error message is returned by on-demand process, as of now, I'm reporting the error message to user by javascript based alert dialog box, but it would much better if i could keep the error message reporting by my application in a consistent manner. So any suggestion please?
    -Krishna

    Hi Roel,
    Thanks, jumping in for help.
    I tried your given code, i found that the page html source doesnt has any element with a name '#messages'. As per my understanding, its the apex engine which checks for any error, if found it shows it by adding an element id '#messages', but here on my requirement its not the apex engine which has detected the error, its my functional logic which wants to report a message. On a normal and error free page condition, we usually dont find '#message' element. I'm curious on how apex inbuilt engine is reporting an error to a page?

Maybe you are looking for