SR520 - UC520 VPN - Banging my head

I had a VPN tunnel working on another SR520 and UC520. I copied most of the vpn parts of the configs over the new set of equipment. It does not work. I am trying to plug a phone into the SR520. It just says registering. The phone is setup on the UC520. I have attached the configs for both.
Thanks to anyone that can help.

sure...
sbcs-48U#sh run
Building configuration...
Current configuration : 39285 bytes
! Last configuration change at 15:34:15 PST Wed Mar 18 2009 by cisco
! NVRAM config last updated at 08:28:42 PST Wed Mar 11 2009 by cisco
version 12.4
parser config cache interface
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service internal
service compress-config
hostname sbcs-48U
boot-start-marker
boot-end-marker
logging message-counter syslog
enable secret 5 $1$9NKA$ctuO5k76h5.MfpwOT44zT.
aaa new-model
aaa authentication login default local
aaa authentication login Foxtrot_sdm_easyvpn_xauth_ml_1 local
aaa authorization exec default local
aaa authorization network Foxtrot_sdm_easyvpn_group_ml_1 local
aaa session-id common
clock timezone PST -8
clock summer-time PST recurring
crypto pki trustpoint TP-self-signed-3798541801
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3798541801
revocation-check none
rsakeypair TP-self-signed-3798541801
crypto pki certificate chain TP-self-signed-3798541801
certificate self-signed 01
   3082023D 308201A6 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
   31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
   69666963 6174652D 33373938 35343138 3031301E 170D3039 30333130 31363433
   31315A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
   4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 37393835
   34313830 3130819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
   8100AF2C 49896D4B 59DC182F B0A72A87 7A2D27C8 0003BDC7 07CB910D 15FB34DE
   B603E7FB 28247D5B 94C8313F 000B9AC6 4066DFE0 E3BD0C96 F526E064 F43F274E
   529F4D05 1A2A2587 AE8A28A2 AF24BF78 6120BE25 BAB3B222 A9C1EF3C CF49099F
   DA489AAE D68C2F0F 7D4B8572 CA5A23C8 C3F2B1F8 57242F5C 265D24B8 ED55D778
   0EFB0203 010001A3 65306330 0F060355 1D130101 FF040530 030101FF 30100603
   551D1104 09300782 05554335 3230301F 0603551D 23041830 168014AE 21B7EABC
   E04263F3 622BDFF1 88F1A4A5 125F9930 1D060355 1D0E0416 0414AE21 B7EABCE0
   4263F362 2BDFF188 F1A4A512 5F99300D 06092A86 4886F70D 01010405 00038181
   007E4AF4 9781D726 BBE4B4D2 D3B98FB0 335B7868 EB463D3E C4F15E6D 9CDA9314
   AC98D61D 50F2395C C9665837 9C257386 4A5D01BC EEBD338A 01280261 A8D74A79
   4A24141A 09828B77 B2C3BB27 0FF2931D 67634FA6 92820CF9 5393F42F DBF713C4
   8BE94DF5 317DF2C9 F0F3A4D4 219139AC 9B8113E7 EA3C2724 CA4A332D 0D191A5B 9F
        quit
dot11 syslog
ip source-route
ip cef
ip dhcp relay information trust-all
ip dhcp excluded-address 10.1.1.1 10.1.1.10
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool phone
   network 10.1.1.0 255.255.255.0
   default-router 10.1.1.1
   option 150 ip 10.1.1.1
ip dhcp pool data
   import all
    network 192.168.10.0 255.255.255.0
   default-router 192.168.10.1
    dns-server 64.102.6.247
ip name-server 64.102.6.247
ip inspect name SDM_LOW cuseeme
ip inspect name SDM_LOW dns
ip inspect name SDM_LOW ftp
ip inspect name SDM_LOW h323
ip inspect name SDM_LOW https
ip inspect name SDM_LOW icmp
ip inspect name SDM_LOW imap
ip inspect name SDM_LOW pop3
ip inspect name SDM_LOW netshow
ip inspect name SDM_LOW rcmd
ip inspect name SDM_LOW realaudio
ip inspect name SDM_LOW rtsp
ip inspect name SDM_LOW esmtp
ip inspect name SDM_LOW sqlnet
ip inspect name SDM_LOW streamworks
ip inspect name SDM_LOW tftp
ip inspect name SDM_LOW tcp
ip inspect name SDM_LOW udp
ip inspect name SDM_LOW vdolive
no ipv6 cef
stcapp ccm-group 1
stcapp
stcapp feature access-code
multilink bundle-name authenticated
trunk group ALL_FXO
voice call send-alert
voice rtp send-recv
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
sip
no update-callerid
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
voice hunt-group 1 parallel
final 400
list 201,202,203,204,205
timeout 16
pilot 505
voice translation-rule 1111
voice translation-rule 1112
rule 1 /^9/ //
voice translation-rule 2001
voice translation-rule 2222
rule 1 /^91900......./ //
rule 2 /^91976......./ //
voice translation-profile CALLER_ID_TRANSLATION_PROFILE
translate calling 1111
voice translation-profile CallBlocking
translate called 2222
voice translation-profile OUTGOING_TRANSLATION_PROFILE
translate calling 1111
translate called 1112
voice-card 0
no dspfarm
username cisco privilege 15 secret 5 $1$VXm.$Z9dCqAQBcpi2qCnr0HKHi1
username remuser secret 5 $1$TDzM$R5lxPNmJCRSIKsAh94maw.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group EZVPN_GROUP_1
key cisco123
dns 64.102.6.247
pool SDM_POOL_1
acl 105
max-users 10
crypto isakmp profile sdm-ike-profile-1
   match identity group EZVPN_GROUP_1
   client authentication list Foxtrot_sdm_easyvpn_xauth_ml_1
   isakmp authorization list Foxtrot_sdm_easyvpn_group_ml_1
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile SDM_Profile1
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
archive
log config
logging enable
   logging size 600
hidekeys
ip tftp source-interface Loopback0
interface Loopback0
description $FW_INSIDE$
ip address 10.1.10.2 255.255.255.252
ip access-group 101 in
ip nat inside
ip virtual-reassembly
interface FastEthernet0/0
description $FW_OUTSIDE$
ip address 64.102.88.173 255.255.255.0
ip access-group 104 in
ip verify unicast reverse-path
ip nat outside
ip inspect SDM_LOW out
ip virtual-reassembly
duplex auto
speed auto
interface Integrated-Service-Engine0/0
description cue is initialized with default IMAP group
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly
service-module ip address 10.1.10.1 255.255.255.252
service-module ip default-gateway 10.1.10.2
interface FastEthernet0/1/0
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/1
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/2
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/3
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/4
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/5
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/6
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/7
switchport voice vlan 100
macro description cisco-phone
spanning-tree portfast
interface FastEthernet0/1/8
switchport mode trunk
macro description cisco-switch
interface Virtual-Template1 type tunnel
ip unnumbered Vlan1
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Vlan1
description $FW_INSIDE$
ip address 192.168.10.1 255.255.255.0
ip access-group 102 in
ip nat inside
ip virtual-reassembly
interface Vlan100
description $FW_INSIDE$
ip address 10.1.1.1 255.255.255.0
ip access-group 103 in
ip nat inside
ip virtual-reassembly
ip local pool SDM_POOL_1 192.168.10.101 192.168.10.109
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 64.102.88.1
ip route 10.1.10.1 255.255.255.255 Integrated-Service-Engine0/0
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
ip nat inside source list 1 interface FastEthernet0/0 overload
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.1.1.0 0.0.0.255
access-list 1 permit 192.168.10.0 0.0.0.255
access-list 1 permit 10.1.10.0 0.0.0.3
access-list 100 remark auto generated by SDM firewall configuration
access-list 100 remark SDM_ACL Category=1
access-list 100 deny   ip 192.168.10.0 0.0.0.255 any
access-list 100 deny   ip host 255.255.255.255 any
access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 101 remark SDM_ACL Category=1
access-list 101 permit udp any host 10.1.10.2 eq non500-isakmp
access-list 101 permit udp any host 10.1.10.2 eq isakmp
access-list 101 permit esp any host 10.1.10.2
access-list 101 permit ahp any host 10.1.10.2
access-list 101 permit tcp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 permit udp 10.1.1.0 0.0.0.255 eq 2000 any
access-list 101 deny   ip 192.168.10.0 0.0.0.255 any
access-list 101 deny   ip 64.102.88.0 0.0.0.255 any
access-list 101 deny   ip 10.1.1.0 0.0.0.255 any
access-list 101 deny   ip host 255.255.255.255 any
access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
access-list 101 permit ip any any
access-list 102 remark auto generated by SDM firewall configuration##NO_ACES_6##
access-list 102 remark SDM_ACL Category=1
access-list 102 permit udp any host 192.168.10.1 eq non500-isakmp
access-list 102 permit udp any host 192.168.10.1 eq isakmp
access-list 102 permit esp any host 192.168.10.1
access-list 102 permit ahp any host 192.168.10.1
access-list 102 deny   ip 10.1.10.0 0.0.0.3 any
access-list 102 deny   ip 64.102.88.0 0.0.0.255 any
access-list 102 deny   ip 10.1.1.0 0.0.0.255 any
access-list 102 deny   ip host 255.255.255.255 any
access-list 102 deny   ip 127.0.0.0 0.255.255.255 any
access-list 102 permit ip any any
access-list 103 remark auto generated by SDM firewall configuration##NO_ACES_8##
access-list 103 remark SDM_ACL Category=1
access-list 103 permit udp any host 10.1.1.1 eq non500-isakmp
access-list 103 permit udp any host 10.1.1.1 eq isakmp
access-list 103 permit esp any host 10.1.1.1
access-list 103 permit ahp any host 10.1.1.1
access-list 103 permit tcp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 permit udp 10.1.10.0 0.0.0.3 any eq 2000
access-list 103 deny   ip 10.1.10.0 0.0.0.3 any
access-list 103 deny   ip 192.168.10.0 0.0.0.255 any
access-list 103 deny   ip 64.102.88.0 0.0.0.255 any
access-list 103 deny   ip host 255.255.255.255 any
access-list 103 deny   ip 127.0.0.0 0.255.255.255 any
access-list 103 permit ip any any
access-list 104 remark auto generated by SDM firewall configuration##NO_ACES_14##
access-list 104 remark SDM_ACL Category=1
access-list 104 permit udp any host 64.102.88.173 eq non500-isakmp
access-list 104 permit udp any host 64.102.88.173 eq isakmp
access-list 104 permit esp any host 64.102.88.173
access-list 104 permit ahp any host 64.102.88.173
access-list 104 deny   ip 10.1.10.0 0.0.0.3 any
access-list 104 deny   ip 192.168.10.0 0.0.0.255 any
access-list 104 deny   ip 10.1.1.0 0.0.0.255 any
access-list 104 permit udp host 64.102.6.247 eq domain any
access-list 104 permit icmp any host 64.102.88.173 echo-reply
access-list 104 permit icmp any host 64.102.88.173 time-exceeded
access-list 104 permit icmp any host 64.102.88.173 unreachable
access-list 104 deny   ip 10.0.0.0 0.255.255.255 any
access-list 104 deny   ip 172.16.0.0 0.15.255.255 any
access-list 104 deny   ip 192.168.0.0 0.0.255.255 any
access-list 104 deny   ip 127.0.0.0 0.255.255.255 any
access-list 104 deny   ip host 255.255.255.255 any
access-list 104 deny   ip host 0.0.0.0 any
access-list 104 deny   ip any any log
access-list 105 remark SDM_ACL Category=4
access-list 105 permit ip 192.168.10.0 0.0.0.255 any
access-list 105 permit ip 10.1.1.0 0.0.0.255 any
access-list 105 permit ip 10.1.10.0 0.0.0.255 any
snmp-server community public RO

Similar Messages

Banging my head against a brick wall

Some background information: I currently have two phone lines, let’s call them line A and line B.
At the beginning of September I decided to move by broadband to BT and signed up online for a Total Broadband package to be activated on line A (the line on which my previous broadband service was active). During the signing up process I was asked if I wished to save money and sign up to the line rental saver, which I did. I got my order confirmation by e-mail and thought all was well.
Having ordered BT Broadband for line A, I decided that I would cancel line B, as I had no use for it.
Shortly after the initial order confirmation e-mail, I received a further e-mail and noticed it stated that new services were starting on both line A and line B, which confused me as I had never signed up for any changes to line B. So I called Customer Services to check out the situation and explained that I wished to cancel line B and did not understand why services relating to that line were mentioned in my e-mail. I was informed that BT was unable to do anything at the time due to there being an order on the line. However, I was told that if I called back once the broadband had been activated on line A, then everything could be sorted out.
So, as soon as the broadband order had been completed on line A, I called back Customer Services to cancel line B. However, I was told that I had paid the line rental saver for line B and would lose that money if I cancelled the line. I checked my account online and, sure enough, BT had activated the broadband on line A but, inexplicably, had applied the line rental saver to line B.
Immediately, I called Customer Services to sort out the problem: I wanted BT to change the line rental saver from line B to line A (as per my order) and cancel line B. However, I was told that it was not possible to change the line rental saver from one line to another. I tried to explain that the error was on the part of BT and that it was down to them to find a solution, only to be met by protestations that this was not possible. I have now spoken to customer services on three separate occasions to try and sort out the problem, without success. Twice I have requested call-backs from a manager and heard nothing either time.
I have now reached the end of my tether as I do not understand why BT is claiming that they are unable to correct their own error. As a result of the situation, I am currently paying for a line I no longer want and am unable to cancel the line without losing a fair amount of money.
Where did it all go wrong with BT customer service? I am sick of speaking to people who struggle to grasp the nature of issues and appear powerless to address any problems unless they are on their crib sheets. It is very frustrating that BT makes it impossible to escalate problems to managers when needed and I am incredulous that the Company is trying to claim that it is unable to sort out a billing error of its own making (particularly as I would imagine that the change of line rental saver from one line to another is simply a matter of changing some details on a computer system).
I hope that someone here can offer some help or point me in the right direction, as I currently feel like I am banging my head against a brick wall and am very disappointed with BT’s response so far.
Many thanks
DJW

Hi David, sorry to hear about your problems. If you click the link in my signiture below my posts the forum mods will be happy to look into this for you
Contact The Mods
Use Live Chat to speak to an advisor
Charges for cancelling your contract early

Loadbalancing 2 VPN links to head office.

Hi,
I have an 1841 router with dual fibre links to the internet. I want to configure both FA0/0, and FA0/1 to VPN to head office. FA0/0 is for data traffic, and FA0/1 is for voice traffic.
So i have 1 crypto map on FA0/1, and a different crypto map on FA0/0. Both maps have the corrosponding ACLs for data, and voice traffic.
The data c-map establishes a connection, but the voice c-map doesn't.
Does anyone know if u can have 2 c-maps on one router pointing to the same remote host ip?
The problem

Hi,
I have an 1841 router with dual fibre links to the internet. I want to configure both FA0/0, and FA0/1 to VPN to head office. FA0/0 is for data traffic, and FA0/1 is for voice traffic.
So i have 1 crypto map on FA0/1, and a different crypto map on FA0/0. Both maps have the corrosponding ACLs for data, and voice traffic.
The data c-map establishes a connection, but the voice c-map doesn't.
Does anyone know if u can have 2 c-maps on one router pointing to the same remote host ip?
The problem

Banging my head on the wall about this

Post Author: despec
CA Forum: General
Folks,Is there any way possible in CR 11.5 to "store" a field value to be compared with the next record's same field value? I need to compare a previous date field within a record with a new date field within the next record to see if it is a consecutive day. I just can't figure out how to do this using a formula, becase my "previous" date just becomes the current record date field. Help, my head is getting softer as we speak :-)David

Post Author: Jagan
CA Forum: General
I assume you just want to use the Previous() or Next() function. Look them up in the help.

Motion 4 + layered PSD files = me banging my head against the wall

I posted this same question in the other M4/PSD file problem, but it was marked as answered (and the answer isn't working for me).
I'm having a similar problem, but changing the resolution to the exact max of 2896x2896 doesn't work for me...and neither does any smaller resolution for some reason.
Today, my layered PSD file is at least not experiencing the crazy tile-effect you included in your posted images, but it is now:
1) always converting the top layer of the PSD file to a flattened image of the whole file.
2) ignoring/mutating my alpha channel information, as areas that should be transparent and smoothly masked off are now opaque and/or blocky.
My images are large, but I need to keep them large for dollying in real closely when i fly a camera through the scene. This is not a problem in After Effects, but I also need to do a lot of these 2.5D animations and several need particle/replicator effects... and I just work much much faster in Motion than AE. I don't remember having this problem with Motion 3 at all, but I can't say I've done a scientific comparison (nor do I want to uninstall M4 for M3).
My system info can be found here:
[IMG]http://i36.tinypic.com/2n744di.jpg[/IMG]
[IMG]http://i33.tinypic.com/28cks42.jpg[/IMG]
Original PSD file info:
[IMG]http://i37.tinypic.com/amdr9v.jpg[/IMG]
[IMG]http://i36.tinypic.com/99kv1g.jpg[/IMG]
[IMG]http://i33.tinypic.com/3355w8x.jpg[/IMG]
[IMG]http://i37.tinypic.com/1zb6y3m.jpg[/IMG]
[IMG]http://i35.tinypic.com/9i5rhz.jpg[/IMG]
Motion 4 info:
[IMG]http://i38.tinypic.com/es40v4.jpg[/IMG]
[IMG]http://i37.tinypic.com/2crva83.jpg[/IMG]
[IMG]http://i35.tinypic.com/2e3popz.jpg[/IMG]
[IMG]http://i37.tinypic.com/jrv8tz.jpg[/IMG]
[IMG]http://i37.tinypic.com/28rh6hs.jpg[/IMG]
Any help is appreciated!
Thank you!

I can't believe I didn't see that! I scanned them in 24-bit color but they are B&W images anyways, so I'm not sure why or how they ended up as 8-bit greyscale... maybe has something to do with the lousy HP dinosaur-of-a-scanner and it's weird proprietary HP interface (couldn't get it to interface with PS4 and don't use it enough to fuss with it).
Thanks!
I think that was about the quickest/least-frustrating help forum experience ever =)

SQL Query - Banging My Head

I've been struggling with this for a couple of days and could use some help -
I have 3 tables
Books (with an ID and Title)
Authors (with a Book_Link and a Name)
Publications (with a Book_Link and a Publication_Date)
Each book can have 0 or more authors. Each book can have 0 or more publications. I ultimately need a report that shows
Book Title/Author Name/Publication Date
So, let's say there are 3 books (ID/Title)
#1 - Book One
#2 - Book Two
#3 - Book Three
Book One has 2 authors and 3 publication dates.
Book Two has 1 author and 1 publication date
Book Three has no authors or publication dates.
With regular joins, I get:
Book One - Author 1A - Pub Date 1-1
Book One - Author 1A - Pub Date 1-2
Book One - Author 1A - Pub Date 1-3
Book One - Author 1B - Pub Date 1-1
Book One - Author 1B - Pub Date 1-2
Book One - Author 1B - Pub Date 1-3
Book One - Author 1C - Pub Date 1-1
Book One - Author 1C - Pub Date 1-2
Book One - Author 1C - Pub Date 1-3
Book Two - Author 2A - Pub Date 2-1
Book Three - null - null
What I need to report to my user is:
Book One - Author 1A - Pub Date 1-1
Book One - Author 1B - Pub Date 1-2
Book One - null - Pub Date 3
Book Two - Author 2A - Pub Date 2-1
Book Three - null - null
I am using Apex so any functions or whatnot would be helpful.
One other condition - this is a query that I am building dynamically, based on the user selecting which fields they want reported on. So any solution needs to account for the fact that the select statement and whatnot need to be constructed as string.
Thanks.

ID    TITLE
1     Book One
2     Book Two
3     Book Three
BOOK_LINK    NAME
1                     Author 1A
1                     Author 1B
2                     Author 2A
BOOK_LINK     PUBLICATION_DATE
1                      01-JAN-07
1                      02-JAN-07
1                      03-JAN-07
2                      01-JAN-07
create or replace function udf_GetAuthorsForBook( Book in int)
RETURN varchar2
IS
authorArr htmldb_application_global.vc_arr2;
authorList varchar(2000);
i integer :=1;
BEGIN
null;
for r in (select name
            from authors
            where authors.book_link = Book
            order by name)
loop
    authorArr(i) := r.name;
    i := i +1;
end loop;
authorList := htmldb_util.table_to_string( authorArr, ', ' );
return authorList;
END;
create or replace function udf_GetPublicationsForBook( Book in int)
RETURN varchar2
IS
publArr htmldb_application_global.vc_arr2;
publList varchar(2000);
i integer :=1;
BEGIN
null;
for r in (select publication_date
            from publications
            where publications.book_link = Book
            order by publication_date)
loop
    publArr(i) := r.publication_date;
    i := i +1;
end loop;
publList := htmldb_util.table_to_string( publArr, ', ' );
return publList;
END;select id, title, udf_GetAuthorsForBook(id), udf_GetPublicationsForBook(id) from books
ID    TITLE             AUTHORS                       PUBLICATIONS
1       Book One      Author 1A, Author 1B        01-JAN-07, 02-JAN-07, 03-JAN-07
2       Book Two      Author 2A                         01-JAN-07
3       Book Three    -                                        -

Banging my head against data transfer to PC from L...

Hi All, I know that MS has brought out the transfer music, photos, videos and podcasts but thats not much use if you want your texts contacts ectera. I have got the Backup set to automaticaly backup app list+settings, texts and photos to the cloud but for some reason its not happening. I have SkyDrive on my phone and PC but I am still seeing empty empty folders in the SkyDrive. To save my hair can anyone tell me how I can get my texts and photos onto my PC.
Why has Nokia not created the PC Suite like that did for the Symbian Phones that was great.

Please use the forum search function, this is asked and answered many times before.
You have no access to the data backed up using the function on the phone. Video and photoscan be synced to your Skydrive or copied to a PC using the companion app or MTP.
Contacts, calendars and skydrive are on outlook.com where you log in with your Microsoft account. or you can use a number of tools, especially Microsoft essentials to access the information on your PC. All these are built in to Windows 8.
Reading the help available on windowsphone.com might also be a good plan.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Portfolio question that I am banging my head against the wall trying to figure out...

I want to build a portfolio with categories. You click something and the appropriate slideshow or lightbox appears or comes into the scene. The troubling part is I dont want to scroll anywhere. I just want 6 categories and each respective lightbox all in one place. Any ideas?

In this case, I would reccomend you use something like a tabbed panel widget and place a lightbox for each inside a specific panel. You could create the overall layout for the lightbox display in the first panel and copy it across the rest to maintain design consistency.
Cheers,
Justin

Banging my head hard in the wall - about to resign

Im sick of getting small horizontal lines during playback on my MBP. I have read all the posts I can find in this forum and other websites. I understand that this is a complex issue. My canon legria HFR 106 shoots in 1080i50, and as I understand it Imovie tags it incorrectly which causes the problems (although it says on the apple site that my camcorder is supported). I´ve gotten some advice from the forum to use "imakefullhd", use JES Deinterlacer and so on.But I want a simple solution.
I really like imovie 11, and want to use it. I don´t want to spend time experimenting (and never find a proper solution) to get rid of the interlacing issue. I´ve reached the conclusion that the easiest way to fix the problem is to buy a new camcorder.
Before I buy a new camcorder I like some advice from people who have a camcorder that record in full HD and have no problems using it in imovie 11. I don´t need the most expensive camcorder, but I have a budget up to 1000 $.
(of course if someone has an easy solution, to make my Canon Legria work properly in IM11, taht would be the best)

Onu Marx,
That is an excellent suggestion. I tried getting JES program from the Apple download site, but this version kept crashing. However, I was able to get an updated version from the JES Homepage and it works. The other option to change the fields is Steve Mullen's iMakeFullHD. That said, I get some odd outcomes with both programs which I will describe below:
1) If I apply it to an .aic file in an existing event folder, I still get interlacing when previewed in iMovie, but I no-longer get interlacing lines if I play the folder in Quicktime X - so at least some progress is being made.
2) If I manually create a new event folder and copy the .aic file into a new event folder then the first time I open iMovie it doesn't show the interlacing lines, but as soon as I close iMovie and reopen, the interlacing lines reappear.
3) If I create a new User Account on my Mac and import the converted .aic into a new event, there is no interlacing lines even if I open and close iMovie.
Very strange indeed! I recall that Steve Mullen once said that this could have something to do with iMovie making some kind of decison on the first clip or event it encounters.
When I have a chance I am going to play around with this a bit more.

Banging my head against a brick wall, please help!

Hi can someone please help me.
I keep coming up against this error, sometimes I manage to get rid of it through hours of tinkering, but still have not found out why it comes up. On theis new site i'm working on, i just can't get rid of it period.
Here is the error.
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at workinprogress_fla::MainTimeline/frame21()
at flash.display::MovieClip/gotoAndStop()
at workinprogress_fla::MainTimeline/clickMenus()
And here is the code on Frame 21.
pic1.addEventListener(MouseEvent.CLICK, clickpic1);
function clickpic1 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic1");
pic2.addEventListener(MouseEvent.CLICK, clickpic2);
function clickpic2 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic2");
pic3.addEventListener(MouseEvent.CLICK, clickpic3);
function clickpic3 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic3");
pic4.addEventListener(MouseEvent.CLICK, clickpic4);
function clickpic4 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic4");
pic5.addEventListener(MouseEvent.CLICK, clickpic5);
function clickpic5 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic5");
pic6.addEventListener(MouseEvent.CLICK, clickpic6);
function clickpic6 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic6");
pic7.addEventListener(MouseEvent.CLICK, clickpic7);
function clickpic7 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic7");
pic8.addEventListener(MouseEvent.CLICK, clickpic8);
function clickpic8 (evtobj:MouseEvent) {
//go to the section clicked on i.e menu page!
gotoAndStop ("pic8");
Can someone please help me out.
Thanks
Tom

thanks for your replys.
I have debugged the movie, and it is now saying the following
Attemping to launch and connect to Player using URL /Volumes/Documents/Sketch Collective/Web Sketch/On the Go/Fuggles Website/Flash/Green Website/workinprogress.swf
[SWF] Volumes:Documents:Sketch Collective:Web Sketch:On the Go:Fuggles Website:Flash:Green Website:workinprogress.swf - 2383999 bytes after decompression
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at workinprogress_fla::MainTimeline/frame21()[workinprogress_fla.MainTimeline::frame21:47]
at flash.display::MovieClip/gotoAndStop()
at workinprogress_fla::MainTimeline/clickMenus()[workinprogress_fla.MainTimeline::frame11:13 ]
I am still clueless, every instance name seems absolutely fine and all in place.
Any ideas?

Banging My Head Against Grep Wall

I'm trying to filter lines out of a log within a shell script, with line like this...
cat log | grep -v "filter word" | grep -v "filter 2" > newLog
...but I cannot find the grep or egrep command for something slightly more complex than a simple match.
I want to exclude (delete) all lines ending with "/" EXCEPT if they begin with "deleting".
So a file which contains these 4 lines...
this gets through
deleting - this gets through/
deleting - this gets through
this does NOT get through/
...will result in this...
this gets through
deleting - this gets through/
deleting - this gets through
Thanks very much for any pointers. Maybe I shouldn't be trying it with just grep?

This works for me at least for the small sample that you provide:
grep '^deleting.*/$|[^>$' log > newLog
What it lets through is:
1. Lines that begin with deleting AND end in /
2. Lines that do not end in a /
I hope that this does what you need.
Message was edited by: hungryjoe
Message was edited by: hungryjoe
Message was edited by: hungryjoe

Banging my head against the wall

I am working on a program to calculate bmi. I have input to read in age range and gender. When I enter input to look at both genders, it does not calculate the total patients or calculate the averages. Any help would be appreciated.
//prompts user for inputs
System.out.print("Enter the file name: ");
System.out.flush();
filename = console.nextLine();
System.out.println("What age range would you like to examine?");
System.out.print("Enter starting age: ");
System.out.flush();
agelooking = console.nextInt();
System.out.print("Enter ending age: ");
System.out.flush();
agelooking2 = console.nextInt();
System.out.println("What gender would you like to examine?\n"
+ "Enter F for Female; M for Male; B for Both genders: ");
genderlooking = console.next().charAt(0);
//reads in gender and age range
while (inFile.hasNext()) {
//read in gender
gender = inFile.next().charAt(0);
if (genderlooking == gender){
//read in age range
age = inFile.nextInt();
// filters logic for age
if(age >=agelooking && age2 <=agelooking2) {
totalpatients++;
//reads in height and weight
weight = inFile.nextInt();
height = inFile.nextInt();
//calculates bmi
bmi = (weight * weightkg) / Math.pow(height * heightm, 2);
totalbmi = bmi + totalbmi;
//takes bmi calculation and filters into 4 categories
if (bmi < 18.5) {
underweight++;
if (bmi >= 18.5 && bmi <= 24.9) {
normal++;
if (bmi >= 25.0 && bmi <= 29.9) {
overweight++;
if (bmi >= 30) {
obese++;
} //end while
//calculates averages
averagebmi = totalbmi/totalpatients;
averageUnderweight = underweight/totalpatients;
averageNormal = normal/totalpatients;
averageOverweight = overweight/totalpatients;
averageObese = obese/totalpatients;
//writing results to output file
outfile.println("Results of the BMI analysis for " + practiceName + ": \n\n");
if (gender == 'm' || gender == 'M')
Gender = "Male";
else
if (gender == 'f' || gender == 'F') {
Gender = "Female";
else
Gender = "Both";
outfile.println("Patients of " + Gender + " gender in age range of " + agelooking
+ " to " + agelooking2);
outfile.println ("Number of patients examine: " + totalpatients);
outfile.printf ("%.1f percent Underweight%n", averageUnderweight * 100);
outfile.printf ("%.1f percent Normal%n", averageNormal * 100);
outfile.printf ("%.1f percent Overweight%n", averageOverweight * 100);
outfile.printf("%.1f percent Obese%n%n", averageObese * 100);
outfile.printf("Average BMI: %.1f",averagebmi);
inFile.close();
outfile.close();
System.exit(0);
}

Because this line will never be true is you are looking for both genders, unless one of the records in teh file was entered as B for gender (Hermaphrodite?)
if (genderlooking == gender){
//Change that line to this
if(genderlooking == 'b' || genderlooking == 'B' || genderlooking == gender){

Want to leave BT, feel like banging my head on a b...

Ive been trying to switch my line rental to SKY, where I currently have my tv, broadband and calls anyway.
Sky have contacted me to say the request has failed due to a postcode error with BT.
They told me that they use a system called "pac man" to check the directory information register before switching anyone. They said my postcode is showing up as WF13 4BG rather than WF13 4BS. They told me to call BT and get somebody to use their version of the order request system to manually change my postcode.
None of the customer service advisors at BT have the foggiest idea what im talking about and i am now in my fourth hour of trying to sort this today alone. I spoke to a very rude man who i eventually hung up on. I considered trying to switch to Primus - however when I enter my correct postcode and phone number, it says they do not match so they cannot complete my request. However, when I enter the INCORRCET postcode of WF13 4BG, it allows me to proceed - OBVIOUSLY IT IS A BT PROBLEM.
I cannot cope with talking to cretins at the call centre again, how can I get this sorted?

The mods have been dealing with this. I would guess that at the moment that the transfer has taken place, and they now
have a temporary "stopped" line, hence its not possible to make any calls until the exchange software initiates the number change.
If they dial 1470 17070, it will probaby read off the number of the "stopped" line.
As they have placed an order with Sky, its Sky that they need to chase up and find out when they will get their new phone number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I feel like I'm banging my head against a wall!!!

I transfered my Itunes libruary to my External hard drive. Everything was going well until I updated my Itunes then I lost everything. The Itunes folder is still on my extenal hardrive. I have changed my itunes media folder location on my preferences but still nothing on my itunes. Can you please help?

buddhautopia wrote:
The Itunes folder is still on my extenal hardrive
what happens if you launch iTunes while holding shift, click on choose library at the prompt, and select the iTunes folder on the external ?

Custom rings tones + itunes = banging my head off the desk

When i try to sync custom ring tones onto my iphone via iTunes it does so but then deletes ALL my music. How do i stop this

I would also like to know how to sync tones, without having to sync music at the same time?

SR520 - UC520 VPN - Banging my head

Similar Messages

Maybe you are looking for