SRM 7.0 for client presentation

Hi,
Currently my client is using SAP ECC MM for procure to payment solution. Now we are trying to convince our client to implement SAP SRM for web base procurement solution. We are planning to set up demo SRM system for presentation . For your information, my client has licence for ECC, EP and PI system. I have few doubts:
1.     Does SAP SRM 7.0 IDES version available at this moment ? What is the latest SRM IDES version ?
2.     Can we request SAP to provide SRM software for a limited period, so that we can install in a demo server for presentation ?
3.     As per my knowledge, now SRM and ECC one client system available at this moment. Does this one client SRM is similar to 
        SRM 7.0 and ECC in two different client ?
4.     Can I work on SRM 7.0 without  EP ?
Thanks in advance.
Regds,
Jennifer

Hi Jennifer,
-> 1. Latest SRM IDES version would be SRM 7.01 (EhP1), we do not use it though we've set-up a system ourselves as you described in point 2.
-> 2. If you're a SAP Partner you should be able to do so.
-> 3. SRM can be configured in 4 technical scenarios: Stand-alone (non SAP-backend, not applicable), Classic, Extended-classic and one-client. Every scenario has different capabilities for further details please have a look at: https://wiki.sdn.sap.com/wiki/display/SRM/Technical+Scenarios]
-> 4. Yes you can use SRM 7.0 without Enterprise Portal. You need Ehp1 or SP06 or higher to do so.
Hope this helps.
Kind regards,
Tim

Similar Messages

  • I would like a recommendation on purchasing a mini projector for client presentations for customers that cant held in conference rooms

    im using a 3rd generation ipad and would like to bluetooth or hardwire the projector to my device.

    Well for starters, anyone who puts audio into a PPT presentation needs to be taken out back, beaten, drawn and quartered, beaten again, put in a stockade, flogged, then beaten one final time for good measure. The only audio coming from a presentation should be the presenter speaking. The PPT slides are meant to be secondary in nature, highlighting the major points of the presentation as you go along, not be the presentation. Audio and video, even those stupid transition effects, just distract from the content. The people at Microsoft responsible for putting those features into PowerPoint, and thus opening the floodgates for all their competitors, should have all the above happen to them, and then add being shot to the very end of it. It's still far too good a fate for the **** those people have loosed unto the world.
    That being said, I'm under no illusion that this is going to do anything but get worse over time, so here's the deal.
    You need a MDP to HDMI adapter that is designed to also carry the audio signal. But it couldn't hurt to teach her how to ensure that the audio output device is set properly. Just in case. Or, you could do the right thing, and start smacking the people who think it's cute to put all these animations and sound effects into presentations. There are a very select few times when that sort of thing is justified, and 99.99999999999999999999999999999% of the time when one is used, it's not one of those times. Then you wouldn't really have to worry about getting audio AND video. Might be rather cathartic too.

  • Ppt for client presentation

    Hi can u plz send poer point presentation sap sd sales process.
    plz send this mail id
    [email protected]
    zapakmail is not working.
    aditya

    SENT MAIL REWRAD IF HELPS

  • Is the image quality in Debut good enough for client presentations?

    Yes. Debut provides high-fidelity renditions of Photoshop (PSD), Illustrator (AI) or InDesign (INDD) files. You can also open PDF, JPEG, PNG and GIF files directly in Debut. Additionally, you can get the highest fidelity view of your work by opting to view it at original size.
    Pinch to zoom in on images; Drag to pan; Double-tap to view at 100%:

    OK,  I have managed to get higher quality images from the PDF renderer. Here is what I have found:
    1) The PDF renderer in Reporting Services 2005 will size all images that it is given at 96 DPI no matter what DPI the image is when you pass it to the renderer. That means that a 300 DPI image or even a 600 DPI image will be sized in the PDF as if it is only 96 DPI. That means your high DPI image will render much larger than you expect.
    So you might expect a 300 DPI image that is 6.5 inches wide to render properly at 1950 pixels. Yet, the PDF renderer will size it as it were 96 DPI which would make the image 20.3 inches long!
    2) There is good news though. Despite sizing the images as if they were 96 DPI, the PDF renderer appears to render higher DPI images at a higher quality than 96 DPI. So despite the sizing being wrong, the image actually is rendering at a higher quality.
    This means that you should size the image to the proper number of inches based on 96 DPI calculations. Then you can use Bitmap.SetResolution to set your images to at least 300 DPI.  That should give you a higher quality image that is the proper number of pixels to fit properly in your report.
    I am able to do all of this sizing dynamically because I am using objects as my data sources, but I am sure there are VB functions you could use in the report itself to accomplish the same task.
    It is late, and I've been at this project all day long, so forgive me if I have explained anything poorly or gotten any concepts long. Yet, at this late hour, I believe this is what the renderer is doing.
    I hope this helps someone else in the future, or at least points them in the right direction.

  • SRM and MDM for material master in SRM contracts for multiple R/3

    Dear all,
    my question is:
    We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
    We heard that MDM and COntent Integraton can be a solution.
    Then detailled question is:
    Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
    Have the mapping done in MDM (Content Integrator?) to a third material number:123
    Replicating the material master 123 to SRM from MDM(?)
    Create global Outline Agreements in SRM for Material Master 123.
    Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
    Have the call-offs quantities correct on 123 in SRM and BW?
    IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
    Thanks in avance

    Hello RD,
    That's a good question.
    You are on the right way. MDM is the tool for you.
    But..
    Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
    - reporting purpose (actual Spend Analysis)
    - mapping purpose (send of XML PO)
    CI was later "fusionned" into the new MDM (1.0) solution.
    So now, you can not order CI without MDM (even if some SRM slides still present CI).
    But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
    You will find everywhere this piece of code:
      Call ECI
        CALL FUNCTION 'BBP_PRODUCT_MAP'
          TABLES
            it_input          = lt_mapping_in
            et_output         = lt_mapping_out
          EXCEPTIONS
            logsys_not_found  = 1
            driver_not_found  = 2
            product_not_found = 3
            internal_error    = 4
            OTHERS            = 5.
    So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
    I my opinion your process is supported by SAP:
    - Extract materials from both R/3 and consolidate them as a single product in MDM.
    - Distribute this product into SRM.
    - Maintain contracts on those products.
    - Distribute them to R/3 (The ECI call is also used during contract distribution).
    - Call offs corrects in SRM and BW
    For MDM documentation, look at netweaver area of service.sap.com.
    For MDM/SRM integration, look at SRM 4.0 spend analysis:
    https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
    For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
    https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
    For SRM5.0, see online help on help.sap.com.
    Rgds
    Christophe

  • Setting up the correct custom project size size for keynote presentation in FCP 7 or motion?

    Hi...anyone else do this?
    I have been creating and editing films in FCP (not X) for years now and have got into creating the whole presentation for clients awards ceremonies etc. via Keynote on my iPad via HDMI to HD projectors and it looks amazing and is seamless on the night. No need for crappy powerpoint slides and jumping to low res DVD films - its all controlled via my iPad.
    But i want to up the creativity of the presentations - at the moment we import the films as mp4 HD QT files and jpegs of the speakers/nominees/titles screens etc. created in Photoshop and put the whole thing together in Keynote on my iPad. It worked a treat and my clients love it!
    Now i had a thought and did a test and created Motion graphics versions of the speakers titles and nominees screens in Apple Motion - so that they had an animated section at the start with whoosh audio stingers as they are played and not just stills - and then export them as QT files - import to FCP 7 timeline and export to compresser ready to convert to mp4 for Keynote.
    This way i can extend the static part of the screen after the motion graphic part to say 10 mins as i never know how long the speaker will be on stage.
    Then when the speaker moves on the next item i can hit the ipad which will move to the next presentaion screen!
    Q. Now ive been doing these as HD 16:9 screens - but when imported to Keynote I have a white band top and bottom on the screen so i really need to start with a template screen size of 1024 x 768 for Keynote and also keep this size in FCP 7! And also export to Quicktime as the same size.
    When i do static jpegs to import into Keynote i just define the pixel canvas size - 1024 x 768 @ 300dpi in Photoshop and it works fine but im not sure what to do in Motion or PCP as I have always created my films in 16:9 HD widescreen preset!
    Anyone else doing this and got a solution to my problem and can help with custom project sizes in motion and FCP 7!

    1024x768 is 4x3.  2048x1536 is 4x3.  Both of these are current display dimensions for iPads 1-3.
    HD video (1920x1080 or 1280x720) is a 16x9 aspect ratio.
    Try putting a rectangle in a square. Unless you scale the retangle up and lose image on the sides you will not be able to properly fill the entire 4x3 display area. The easy compromise is letterboxing to ensure all of the rectangle is display in the square. The iPad is doing this with very little effort on your part.
    In FC you can create a new sequence and go into the settings and customize it to 1024x768, 2048x1536 or
    just about any other dimension. Even If you create a custom sequence at 1024 or 2048 in FC you will see the same results that the iPad is giving you with much less effort, render and conversion time (presuming your keynote workspace cannot change in dimensions or aspect ratio and you are unwilling to crop your 16x9 aspect ratio video to fill the space.) 

  • SRM 7.0 for two envelope bidding

    Dear SRM gurus,
    Am new to SRM. My client is implementing SRM 7.0 for limited tenders in which two-envelope bidding is involved.
    PR, PO and all other flollow-on documents will be created in ECC 6.0.
    I have activated business function SRM_Sourcing_1 and activated other RFx related config.
    Kindly let me know all other config's that are required.
    Regards,
    Satish

    Hello Satish,
    Please find the configuration guide for the same
    https://websmp102.sap-ag.de/srm-inst
    Select SAP SRM Server 7.01 - Configuration Guides for SAP SRM Ehp1 - SAP SRM 7.0 EHP1: Strategic Sourcing
    This has all the steps.
    Hope it solves.
    Ashutosh

  • Gallery for client photo review

    Search didn't give me much useful, so I post.
    What recommendations to you have for a easy to navigate LR gallery for clients to add comments and return them to me.
    Or, do people have recommendations for galleries they like for presenting images to clients?
    Thoughts? Suggestions?
    Thanks!
    Reid

    Does the TTG selection gallery remember comments if I close my browser, reopen it and revisit the same site?
    The problem with most stand-alone templates is that they are single session only. If the TTG Gallery or other templates have an effective way of being multi-session, then that is very nice and my next comments are irrelevant.
    By single session I mean that the comments and checkmarks only exist for that visit to the website, and leaving the website and coming back makes you start all over. That is a big problem, because there are few things more frustrating than spending a long time commenting or checkmarking files, only to lose all the work because the browser gets accidentally closed, or the email fails to send, or they didn't know they would lose all their work by 'continuing tomorrow', or some other problem happens. Think about it... if you are a client that spends a couple of hours sorting through photos and then the comments are irretrievably lost, are you going to be a happy client?
    Some comment systems try to make the system 'sticky' by using cookies, but you can effectively only hold a couple thousand characters in a cookie after overhead, and that isn't much.
    I learned the hard way by trying to do some 'little job' sales through the "EOS Template" ( http://www.eostemplate.com/eos ), which is a VERY nice template, but suffers from the ZERO memory between sessions fatal flaw.
    So be very careful when selecting an interactive photo system to use with your clients... if the data isn't collected dynamically and stored on the server somehow, I would avoid it.
    I wish that I could fully recommend Zenfolio.com , since it has such a great interface, and it allows for the client to create their own 'collections' of referenced photos (a great sorting aid), but comments are not implemented yet.

  • When converting over to HTTPS and PKI for clients, not all actions are available in configuration manager cpl

    I'm not exactly sure which forum heading this should go under so if this isn't correct please let me know or move it on my behalf.  
    So I am trying to setup Internet Based Client Management in SCCM 2012 R2 and have come across a few articles on how to do so.   I think I have mostly gotten it to work but I seem to be having a client issue when deploying new machines.  My already
    deployed servers seem to have picked up the PKI setting no problem.  In the past when I would deploy a new windows client everything would be fine.  When i converted over to PKI in my test environment I am now having issues when I go to deploy a
    new windows client. I don't get all of the Actions listed in the Configuration Manager control panel.  All I have are Discovery Data Collection, Machine Policy Retrieval and Eval, User Policy Retrieval and Eval, and Windows Installer Source list Update
    Cycles, before all of them would populate no problem.  I have let this machine sit here for several hours and nothing has changed yet.  It does say PKI for client certificate.  Sometimes when I would deploy new machines it would say NONE for
    Client certificate.  In my production environment it says self-signed.  I have found if i uninstall the client and re-install the client it does populate all of the cycles but I don't understand why it is not working on deployment.
    Ok so maybe not all the time that when i reinstall the client it fixes it.  I just did an uninstall and reinstall on a test client and all it has under actions are machine and user policy cycles.
    Does anyone have any ideas?

    Hi,
    I think SCCM client installed before the GPO applied, so you don't a certificate available when it is required.
    You can export and import the certificate by using MDT integration, try this blog for PKI part:
    How To: Build and Capture in Configuration Manager 2012 using HTTPS
    And in addition, you can upload the log to your onedrive so you can share with us.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

    Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp

    Morning DeeHutton,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Best of luck,
    Mario

  • I am considering using I Pad for a presentation and want to use it in a wireless environment and though a projector not a TV monitor. Can I use Apple TV and apple wireless base,

    I am considering using I PAD for a presentation using a projector.  How can this be done.  will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV  and to projector.  So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.

    Kenabsalom wrote:
    I am considering using I PAD for a presentation using a projector.  How can this be done.  will Apple TV connect to a projector and if so does the projector have to have an HDMI slot or is there some sort of adapter to convert VGA slot so it connects with Apple TV. I also want to do it wirelessly so does the Apple wireless device work for this purpose, is so what do I need to connect that to the Apple TV  and to projector.  So, ideally I want to be able to operate the IPAD without it being connected to cables and have the image procted on screen using a projector which only has the VGA slot not an HDMI slot. any suggestions will be appreciated.
    It can use Apple Tv, but will require a wireless network as well. The Apple TV has an HDMI output, and depending on the projector it may connect directly to it through HDMI.
    There are adpaters out there that will convert from HDMI to several other types such as VGA or Composite oir RGB. It would not be directly an Apple product as it would work with the HDMI cable rather than the apple TV or iPad directly.
    Basically your setup should be:
    iPad  -> Wifi Network -> Apple TV-- HDMI Cable-->Adapter---->Projector
    If the iPad is iPad 2 or above you can mirror the entire display to the projector through the apple Tv.
    The Adapter would be something like this for instance:
    http://www.amazon.com/Sanoxy-HDMI-Composite-S-Video-Converter/dp/B0047PDBP0
    Or this:
    http://www.amazon.com/ViewHD-Component-Converter-Support-Surround/dp/B004F9XVBC
    With that said there are projectors that can be used wirelessly from the ipad without the need for Apple Tv or any adapter.
    Epson makes one and a proprietary App to use it.
    https://itunes.apple.com/us/app/epson-iprojection/id488048021?mt=8

  • Certificates issued by communications server for client authentication

    Hi,
    we ran into problem with those certificates, that are being issued by the lync server itself.  In our enteprise we have CX600 and CX3000 phones, and i know that certificate authentication is required for the phones to work (both for registrar and webservice).
    However, now that users have lync installed, they have their communications server certificate assigned as well. The problem is when a user needs to sign a document with the certificate from our private CA, for most of the users, word or excel suggests to
    use a certificate issued by communications server, not our ent CA. Maybe there is a way for LYNC to trust private enteprise CA and not give out its own certificates and STILL use certificate authentication?
    Thanks!

    Facing almost the same issue, Lync (server) issues ClientAuth certs from "Communication Server", (btw
    is not trusted of course), and in turns forces users to make a selection of which VPN cert to use when dialing in, instead of only one ClientAuth cert installed, they now have 2 ClientAuth certs installed, which our internal CA's should care about and NOT
    the Lync (server).
    Don’t get how an MS product of this caliber can be built without proper PKI integration, how can it NOT utilize internally issued certs for client authentication???
    Not the first though, SCCM and OSD is another example....
    However, are you saying that Lync communication can’t be used without certificate authentication,
    without the user being spammed with credential prompts?
    Trying to get clarification on this…

  • Want to use ipad for wireless presentations

    want to use ipad2 for wirelee presentation on a 16:9 screen but if using apple tv the icon screen does not stretch to fill while video still fills the screen. can i get both to fill the screen? Or is there a way of using a 2nd ipad as a mirror and cable connecting it ?

    I just downloaded Pocket Light Meter.  After I turn on the additional settings, I can see foot candles , however when I compare it to my actual light meter to check the validity of the Pocket Light Meter, they are way off.    Any idea how to calibrate it or to check if possibly I am doing something wrong??

  • How can I make two copies of the same picture one with my watermark and one without for printing for clients?

    how can I make two copies of the same picture one with my watermark and one without for printing for clients?

    Export the photo twice, once with a watermark and once without a watermark.

  • Can I create a fillable pdf form and then export it for client use on my web site?

    Can I create a fillable pdf form and then export it for client use on my web site?  I need clients to be able to fill in the (registration) form on my site then submit it via email.

    [discussion moved to Creating, Editing & Exporting PDFs forum]

Maybe you are looking for