SRM business systems
In an SRM POC scenario, we set up the SRM business systems individually in PI dev, qa and prod without setting them transport targets. Now we have a full blowm SRM live system but unfortunately the SLD set was never changed. If we create groups in dev qa and prod in PI landscape would it affect the existing interfaces live. For example, if there is a SRD already created in PID SLD and SRT in PIQ SLD. If we create SRD and SRT as transport targets and move it QA, would it affect the already existing SRT business system??
Teresa
Thanks. But when you create the groups and move the transport would it create problems to interfaces running in QA and PROD? I am assuming since the GUID's are different would it create problems when it sees a new SRT imported from Dev?
Teresa
Similar Messages
-
Missing business systems in model configurator
Hello,
i am on PI 7.1 and have to configure a SRM scenario. In step "assign communication component" (business system) in the model configurator all business systems are missing.
Please the screenshot:
[http://img211.imageshack.us/i/bild1m.png/]
What configuration is missing? In SLD all business systems with software are maintained.
Thanks for help
Regards, TrevorDear Trevor,
Let me solve your problem,
In the snapshot it says clearly that "Search Criteria" Communication Component Selection "Value" for Product SAP SRM 7.0
Which means in SLD it will search for the Business Systems which got assigned with Product SAP SRM 7.0.
So please check your SRM Business System "MSRCLNT001_SRM" and assign the Product SAP SRM 7.0 to it in SLD.
If you couldn't find the Product in the SLD then you must update your Content Repository to latest level SAP_CR 6.6 in SLD.
Please check the note for SAP CR Update:
SAP Note 669669 - Updating the SAP Component Repository in the SLD
Similarly you may face the problem for your ERP as well, so select Product SAP ERP 6.0 EHP 4 if you are implementing the same.
Hope this is helpful.
Regards
Praveen K -
General XI Connectivity activities in the business system to connect to XI
Hi,
Is there any general/common XI connectivity activities/configuration to be done for a business systems (both SAP and Non-SAP) to preparfe it to able to talk to SAP XI ? Is there any mandatory tasks (sort of a checklist) to make a business system to be able to integrate it with SAP XI (apart from specific configuration).
The SAP XI Master guide talks about XI Connectivity add-on client to be installed in the business system. I am not understanding as to what does that mean. For Example, if i want to integrate SAP SRM business system to SAP XI, what are the minimum XI connectivity related activites to be done on the SAP SRM system.
I appreciate your input in this regard.
Regards
GaneshHello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy -
Business System not reflecting the XI Content for SRM
Hi,
We are currently working on the SUS-MM scenario.
The landscape includes PI 7.11, SRM 7.0 and R/3 4.6C. SLD Communication is working fine between these systems.
Integration Builder has SRM Server 7.0 and SRM Server IC 7.0 imported.
The current status:
We can successfully transfer vendors from SAP R/3 to SUS
We cannot transfer transaction data from SAP R/3 to SUS, e.g. purchase orders etc
Our Main Issue:
The Business System INTEGRATION_SERVER_<SID> is imported into the Integration Builder from the SLD.
On the Display communication component screen, the receiver and Sender tabs are not showing any of the SRM Server or IC components that have been imported into the ESR. However is displaying only the BASIS components that was imported during inital install.
Because of this, we are not able to proceed with the configuration though the interfaces being available in the ESR. We are not sure what is that we are missing that is preventing the XI content for SRM from being displayed. Also, the PI business system in the SLD has the SRM Content listed under the installed products list.
Any help would be appreciated.
Thanks
Venkat.Hello,
do you have a solution? I'm facing the same issue.
Regards,
Sven -
Business system not known to SRM
Hi,
We are able to send and xml PO to SRM server, but we are getting ABAP Application error in the pipeline service of the IE of SRM.
In SXMB_MONI in SRM:
Under Trace:
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system QA2_220 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 92</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
Under Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
QA2_220 is defined in the XI SLD, and it is the sender service. I am not sure why it is saying "QA2_220 is not a known programm." Does anyone know why we are getting this error?
Any help is appreciated.
Thanks,
KarmaYou need to associate the Logical System in SRM with the SLD Business System.
This is how to do it.
In the SRM system, go to the IMG through SPRO:
Goto SAP Implementation Guide->Supplier Relationship Management->SRM Server->Technical Basic Settings->Define Backend Systems
You should have the logical systems defined there. Scroll to the right and add the SLD Business system name under the "System Landscape Directory Name"
This should do it. Now when SRM tries to process the message from the Business system, it will look up the corresponding logical system from this entry.
Regards,
Jay -
Technical systems and Business systems in SAP XI
can any one tell me ,breifly explain the diff b/w <b>Technical Systems</b> & Business Systems?
steps to create Techincal system and Business systems?
and also Steps for creating Software Components? For Technical System we can create more than one Business systems ,what it means?can any one explain?Hi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar -
Hi All,
I would like to know the infosource of 0SR_C01 procurement overview(aggregated) cube. while on help.sap it shows 0SR_MC01 as a multiprovider for 0SR_C01. But could not find the infosource for the same.
I would also like to know if anyone has the list of content infocubes and their infosources for SRM. Please share it with me.
Thank in Advance
NirenHi ,
for all business content, you can start here
http://help.sap.com/saphelp_nw04s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
scm
http://help.sap.com/saphelp_nw04s/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
and bi best practice
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
Check this link for SRM Business Content information: http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
DataSources
New DataSources have been created for NW 2004s BI Content Add-On 2 and SRM 5.0. These are described here, along with their extraction logic.
The following graphic shows the data flow from the DataSources to the DataStore objects
Structure
Each DataSource has an extraction structure and a data extractor. Generally, this is an RFC-capable function module.
There are two types of extraction: Specific extraction and generic extraction:
Specific extraction is strongly oriented towards the data model of the BI System and the necessary extract structure. It executes DataSource-specific processing steps.
The logic contained within the generic extraction is implemented centrally and can therefore be reused by the specific extraction modules. The generic extraction deals with access to the SRM database and is similar for each DataSource.
Generic and specific extraction
Extraction logic in detail
Data extraction involves the following six function modules:
InitLoad
InitLoad is called as soon as an initial upload is started in the BI System. In other words, it is executed when data is loaded into the BI System for the first time. The module can restrict the data extraction according to filter criteria that were defined in BI during extraction (for example, extract the data for a particular timeframe). InitLoad packages the data before it is transferred to the BI System.
DeltaLoad
DeltaLoad is called when a document is modified in the SRM System. The module writes data that has accumulated since the initial loading to a delta queue.
Data Collector
The Collector reads the required data from the database in the source system. For performance reasons, the data is then buffered in system-internal tables. The tables have the same structure as in the database. This saves time and effort, because data conversion is kept to a minimum.
Data Consolidator
The Consolidator groups data that belongs together from a business point of view. The consolidated data is stored in internal tables and is prepared for further processing.
Data Normalizer
The Denormalizer prepares the source data for the BI System. It calculates key figures that are required for the report but are not contained on the database and converts data types in the source system to data types of the BI System. Depending on the BI data model, the system now decides how each row is filled with data.
Data Mapper
During mapping of the data, the system defines which fields of the denormalized data structure are assigned to the fields of the extract structure. In this way, flat and one-dimensional lines are generated from the data.
The following table shows the technical names of the function modules of the individual DataSources:
Description
0SRM_TD_PO
0SRM_TD_CF
0SRM_TD_IV
0SRM_TD_PO_ACC
InitLoad
BBP_BI_PO_EXTRACT
BBP_BI_CF_EXTRACT
BBP_BI_IV_EXTRACT
BBP_BI_PO_ACC_EXTRACT
Collector
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
BBP_BI_GEX_COLLECT
Consolidator
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
BBP_BI_GEX_CONSOLIDATE
Denormalizer
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
BBP_BI_GEX_DENORMALIZE
Mapper
BBP_BI_PO_MAP
BBP_BI_CF_MAP
BBP_BI_IV_MAP
BBP_BI_PO_ACC_MAP
DeltaLoad
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
BBP_BI_DELTA_UPDATE
Hope this helps,
Regards
CSM Reddy -
Difference betweeen Technical systems and Business systems
Hi
In a SLD we need to configure technical systems and Business systems.. what is the exact difference between Technical Systems and Business Systems..
this question is asked an interview.. for this.. how can we explain..
thanks
babuHi babu
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
Reward point if it help u understand -
XI Technical and Business System Definition For MDM 2.0
Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry MartinekYou can set it as third party and it will work fine. Because MDM isn't built on the wed application server like the majority of the netweaver apps, it's basically treated like a third party system as far as integration is concerned. Hence you send and receive XML documents to PI and convert them into IDocs to send to R/3
Check the beginning of this document on creating the business and technical systems for MDM
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario -
XI Technical and Business System Definitions For MDM 2.0
Hi,
We're trying to define the XI technical and business system definitions for our MDM 2.0 installation to work with SRM 5.0 and PI 7.0.
In the documentation we have we can't find reference to what type of a technical and business system to define. Should they be abap/java/standalone/3rd party?
Does anyone have any install scripts of what they did?
Regards,
Jerry MartinekThird party will work fine
-
Hi,
can we import XI business systems using import function in SLD
jeffHi
First I let u know with analogy and actual definition as below
Any module of SAP like MM, SRM, FICO ets makes a logical system in combination according to business requirements is a business system which is actualy hosted on an application server like ABAP AS or Java AS which is basically a technical system.
Technical systems are application systems that are installed in system landscape (a CRM server, for example). Most systems (Web AS ABAP and Web AS Java systems) automatically report information to the SLD about the elements that they contain by using the SLD data supplier programs. You need to manually register the following types of system only:
Standalone Java systems
Third-party systems
Business systems are logical senders or receivers that exchange messages by using SAP XI and that are entered in the System Landscape Directory.
The business systems in the System Landscape Directory relate to a system landscape.
The business systems of business partners are not entered in the System Landscape Directory. To be able to address such business partners logically, use services in the Integration Directory. A business system is a way of specifying a service in the Integration Directory more precisely (business system service).
U can also refer Blog's
Re: Difference betweeen Technical systems and Business systems
For creation of software component see link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3172d290-0201-0010-2b80-c59c8292dcc9
<b>Reward point if it help u understand
</b>
Message was edited by:
Ajay Kumar -
Change in technical and business system.
hi,
in production we are replacing SRM system with NEW SRM system.the only difference is the host name.if create a new technical system with new host name and business system based on this techical system,will the scenario work perfectly.
all other details are same in both.
the business system name is same as previous and in scenario of integration directory.
will the change in HOST NAME effect the scenario.
plz let me know and the abap tables in which the details of this T SYS and B SYS are stored in .
thanks and regards
vijenderHi,
The Following things needs to be take care
1) Make sure that your Logical System name is same as Old one in the Newly created TS
2) Make sure that Your BS name is same as Old Name
After this do SLD data Update through ID-Environment-SLD cache update
Now trigger the Scenario
REgards
Seshagiri -
XI - Error Assigning business system services for A2A configuration
Hello!
I am working with the integration scenario plan_driven_procurement_supplierenablement and the integration scenario configurator. Performing the second step - assign services following error occurs:
An error occurred when accessing the SLD server
MESSAGE ID: com.sap.lcr.api.cimclient.LcrException (serialized)
com.sap.lcr.api.cimclient.LcrException: User credentials are invalid or user is denied access
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:577)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:341)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:198)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:146)
at com.sap.lcr.api.cimclient.CIMOMClient.getInstance(CIMOMClient.java:572)
at com.sap.lcr.api.cimclient.CIMClient.getInstance(CIMClient.java:1250)
at com.sap.aii.ib.server.sldaccess.SLDReader.getCIMInstance(SLDReader.java:224)
at com.sap.aii.ib.server.sldquery.SLDQuery.readSLDElementAssociatorKeyList(SLDQuery.java:941)
at com.sap.aii.ib.server.sldquery.SLDQuery.selectSLDElementList(SLDQuery.java:656)
at com.sap.aii.ib.server.sldquery.SLDCache.actualize(SLDCache.java:34)...
Could you please tell me which user is meant? Where can I change it?
Thanks a lot - BarbaraName: Plan_Driven_Procurement_SupplierEnablement
Namespace: http://sap.com/xi/SRM/Basis/Global
Software Component Version: SAP SRM SERVER 5.5
The problem is the connection between the Integration Scenarion Configurator (Integration Directory) and the central SLD which means that the XI is not on the SLD host.
When I try to assign the business systems, which I created in the SLD, I have to assign a service (business system) to every single role. When I am trying to add a line and display the list of permitted values a new box opens in order to select the service.
Selecting the product, i.e. SAP R/3 the pop up with the error appears.
Do you need more information please let me know which! -
hi,
I read the documentation for srm business package 5.0.
Following things were not clear
1. How does one configure the iviews to connect to backend system. Is it via jco destination, if so what are the parameters required
2. how do you custimize the iviews , require some information.
Thanks,
Harish
(Answers will be well rewarded)samta,
depending on the version:
- BP for SRM 3.0 50.1: https://www2.iviewstudio.com/support_content/_9949/bp_srm_30.pdf
- BP for SRM 4.0 60.2: https://www2.iviewstudio.com/support_content/_17147/Documentation.pdf
- BP for SRM 5.0 5.0: https://www2.iviewstudio.com/support_content/_17241/BPforSRM5.0.pdf
kr, achim -
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0?
Hi,
How to find Table names for PO & Invoices in SRM Standalnoe system SRM 7.0? Please let me know.
Thanks,
MonicaHi,
In SRM for all objects like SC ( BUS21210),BID,PO(BUS22010),Confirmation (BUS2203),invoice etc all the data stored
in BBP_PDHGP and BBP_PDBEI tables only, These is no separate tables..
for your reference below are the few SRM tables
BBP_PDACC Account Assignment
BBP_PDATT Document Attachment
BBP_PDBEH Backend Specific Header Data
BBP_PDBEI Backend Specific Item Data
BBP_PDBGP Partner Extension Gen. Purchasing Data
BBP_PDBINREL Transaction Object Linkage (EBP)
BBP_PDHCF Set for Tabular Customer and Solution Fields on Hdr
BBP_PDHGP Business Transaction Purchasing Information
BBP_PDHSB Bid Invitation
BBP_PDHSC Header Extension for Customer Fields
BBP_PDHSS Hdr Extension for SAP Internal Enhancements (IBUs and so on)
BBP_PDICF Set for Tabluar Customer and Solution Fields on Itm
BBP_PDIGP Business Transaction Item-Purchasing Information
BBP_PDISB Bid Invitation/Bid-Specific Item Data
BBP_PDISC Item Extension for Customer Fields
BBP_PDISS Item Ext. for SAP Internal Enhancements (IBUs and so on)
BBP_PDLIM Value Limit
BBP_PDORG Purchasing Organizational Unit
BBP_PDPSET Further Procurement Information
BBP_PDTAX Tax
CDCLS Cluster structure for change documents
CDHDR Change document header
CDPOS_STR Additional Change Document - Table for STRINGs
CDPOS_UID Additional Table for Inclusion of TABKEY>70 Characters
CRM_JCDO Change Documents for Status Object (Table JSTO)
CRM_JCDS Change Documents for System/User Statuses (Table JEST)
CRM_JEST Individual Object Status
CRM_JSTO Status Object Information
CRMD_LINK Transaction - Set - Link
CRMD_ORDERADM_H Business Transaction
CRMD_ORDERADM_I Business Transaction Item
CRMD_PARTNER Partners
SROBLROLB Persistent Roles of BOR Objects
SROBLROLC Persistent Roles of Business Classes
SRRELROLES Object Relationship Service: Roles
Thanks & Regards,
Prasad S
Maybe you are looking for
-
I am trying to delete an XLS file from a network drive and am getting a message that says the file cannot be deleted because it is in use. I can't see where it is in use and have tried to reboot the computer to no avail. I can delete other files bu
-
Using Windows Vista and IE7 with Forms based applications
A user has Vista & iexplorer 7 installed on their machine and when they attempt to access the Professional Buyer responsibility (forms based) they receive an error message stating that 'Internet Explorer has stopped working'. When they attempt the sa
-
Errors when entering responses manually
I have been encountering an error, when manually entering responses to an existing (and open) Form in Adobe FormCentral. We are currently collecting registrations for an annual event, and the majority of people register online (via the form). However
-
Seeburegr AS2 - encryption certificate reference
Hi guys! I need to configure encryption certificate for AS2. The certificate is imported in the JAVA AS. View AS2, entry AS2C. Now, in the receiver agreement I have following items: - AS2 sender configuration / Signing Key - AS2 receiver Configuratio
-
Can OS X Lion be used without a wireless connection?
I have two wired networked Mac Minis with track balls. Can't figure out what I would need to upgrade or change to use Lion. Would I need to go wireless?