SRM-SUS 7.0 - Updating Vendor Bank from BP Bank Details

Hi SRM Gurus,
We are implementing SUS (SRM7.0) and part of the requirement is that we need to update vendor bank details in our ECC6.0 backend once our vendors have updated it in our SUS portal. We have used BBPGETVD to transfer data from our ECC to SUS. Now my question is how to bring updates such as bank details back into ECC from SUS. I am not sure if this need a custom solution or ALE or PI.
If you can provide documentations / guide it will be most helpful.
Thanks.
Kind Regards,
Darwin

Actually SUS does provide a standard update of bank data. What I am unsure about is whether this update is handled also in SUS (XI) - MM (IDoc CREMAS) mapping and finally update of the vendor data in MM via IDoc inbound processing.
In order to enable this you basically just need at least one entry in the bank table (bnka) in the SUS server, which can be created manually via transactionf FI01 or imported from files provided by difffering providers depending on the country for which you want bank data.
regards Thomas

Similar Messages

Creating / updating vendor master from CREMAS03

Hi All,
I am getting vendor master data from external system and SAP XI will convert this into Idoc of message type CREMAS03. I would like to create/update vendor master in R/3 system from Idoc CREMAS03. Which function module / BAPI will cater to this need.
Thanks and best regards
Kalingeri

Hi
Check in WE57 using the Message type & Idoc type & direction.
IDOC_INPUT_CREDITOR & IDOC_INPUT_CREDITOR_MDM are the the two Func modules being used. You can use any one of them based on your reuirement
Thanks & Regards
Kishore

Background job to create/update vendors.

Hello,
We need to create/update vendor records for travel expenses reimbursement. So far we try to create it as background scheduled job for transaction PRAA, but in fact PRAA transaction only creates batch input session and donu2019t process it. In fact we end up with out updates for vendors.
Usual manual routine is:
Call PRAA to create batch input session for create/update vendor records from HR Master data.
Call SM35 to process creates batch input session.
We would like to avoid this manual routine and run it on background as scheduled job. Is it possible? How it possible to combine this 2 processes?
BR, Maija

the process can only be run in a two step process.
You could have a BASIS program that automatically processed all sessions in SM35 with a certain Batch name, this will remove the manual step, however someone will still need to monitor it, as there may be errors.

BAPI for create/Update Vendor Partner functions (XK02)

Hi,
We have a requirement where in we need to update the partner functions of a vendor (table WYT3), transaction XK02. Is there any BAPI to do so?
Regards,
Vinod Nagre

Hi
Can you help me, how is possible update vendor data using net. connector with RFC function (or some another way to update vendors data from 3th party program). Up to now I read only data from LFA1 using net. connector (using RFC function RFC_READ_TABLE) and now I need update vendor data (e.g. NAME1, NAME2, ADRNR etc. from LFA1)
Our SAP system contains very much duplicate record (many LIFNR has the same STCD2, STCEG etc. but different NAME1 who contains typist's error or something like this. 6000 vendors has 1700 duplicates and incomplete record). Our Administrator don't know how set up SAP so that impossible create duplicite vendors! Because our system SAP contains very, very, very much elementary error, this system is not helpfull for our company.
Thank you

SUS: Clients dont update to 10.6.3

I got a problem with SUS. The updates were downloaded from Apple (the 10.6.3 v1.1 Combined Updates), got activated and are without error in the SUS-list in Server Manager. The original 10.6.3 updates are copied but not activated - I guess they were replaced by the v1.1 versions.
The clients are managed and pointing to the snow-leopard.merged.1 catalog (all the other updates like itunes, raw compatibility etc are recognized correctly).
But I cant get the 10.6.2 clients to upgrade to 10.6.3 - they simply find no updates when looking for updates.
Please help, I'm gettting desperate about SUS
Mike

In the past, a single managed preference worked for all Tiger and Leopard clients. With Snow Leopard a different setting needs to be used which your message suggests you are doing correctly. However my own experience was that despite this it did not in reality work properly.
Fortunately, Apple have now come up with a better approach. It basically boils down to the SUS server detecting what operating system version the Mac client is running and automatically redirecting the client to the correct catalog. This seems to work correctly for me in that my Snow Leopard clients do now see Snow Leopard specific updates. As however I had previously manually upgraded them to 10.6.3 I can only say this with regards to other updates.
See this Apple tech note on how to set up your system.
http://support.apple.com/kb/HT4069
I used the third solution in that document which is under the heading "Using the same URL for all clients".

Error updating vendor from SRM to SUS

Hi All
We are using SRM 4.0 in Extended classic scenario, alongwith SUS.
We have a nightly batch run & vendor changes from ECC are updated in SRM.
For Vendors marked as Portal vendors, there is a real time interface between EBP and SUS (thru XI), which updates the vendor in SUS.
However some of the updates are failing in SUS. The error message in SXMB_MONI, trace is as follows.
<FAULT_TEXT>An error occured within an XI interface: Exception occurredE:R1:479 -Address still in use; change to validity not allowed Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
We are not able to determine which address and how exactly it i in use??
Regards
Kedar

Thanks for the Reply
When I restarted the messages in SXMB_MONI, the errors have gone now, but I still see failures in SLG1.
here is the complete description:
Don't know if it is processed or not?
Address still in use; change to validity not allowed
Message no. R1479
Diagnosis
You have attempted to restrict the validity period of a BP address. However, this BP address is still being used, which means that you cannot make this change.
System response
The system issues an error message. The validity of the address is not changed.
Procedure
Display the where-used list for the BP address. If you still want to change the validity of the address, then change the address reference for the applications in question.
In most cases, if other applications are affected, you can navigate from the where-used list directly to the corresponding application in which you call up the context menu.
Then try again to change the validity of the BP address.

Vendor replication from SUS to ECC 6 backend in SRM 7.01

Dear Gurus,
1. Vendor registration in ROS: Vendor's are registered in ROS and stay there as preapproved vendors. They can be replicated to SRM system through OPI calls. How these suppliers are replicated to backend MM system?
2. I get to know that from SRM 7 enhpk 1 facilitates transfer of vendor data from SRM SUS to SAP ERP. A business partner monitor cockpit is available in SUS/ROS. Do we need to upgrade our ECC system to ECC 6.0 enhpk 5 or ECC 6.0 enhpk 4 will do to avail these functionality?
Any input on these will be highly appreciated.
Thanks and regards,
Ranjan

Hi Ranjan,
As of now without Ehp1, vendors are replicated to backend MM systems using a PI scenario "Supply_base_management".
And you are right, from Ehp1 vendor replication will be handled as you mentioned and ECC Ehp4 will support that.
Nikhil

Vendor replication from SRM to R/3?

Hi all,
How to replicate or update vendor master data from SRM to R/3.Is there any programs, BAPI's or IDOC we can use?
If any one knows please let me know.
I believe that BBP_VENDOR_SYNC is for R/3 to SRM.
BBP_VENDOR_GET_UPDATE is this FM works?
Thanks
Chris.

Hi Chris,
There is no standard functionality for this behaviour.
You can try to reuse and adapt :
function bbp_partner_send that is used for SUS vendor synchronization.
or
ros_send_upd_vendor2cat which is used to create source of supply catalogue for supplier directory.
Kind regards,
Yann

Service procurement from SRM-SUS

HI,
Pl guide me how to procure services from SRM-sus
Say supplier performs the services and confirmation in SRM-SUS so that SES will be created in R/3
and SES approval in R/3 and send back the SES no to SRM-sus.
pl share is thesre any documents regarding process flows etc
thanks
Rami

hi,
I Have created the service order with service activity in ECC6 and send the Idoc to SRM(version5)
in SRM i am not able to view the Serive Details. only item overview discription with 1 AU is displaying.
i want create ASN for actual service perofrmed by vendor.
EX PO item overview
item 10- painting at E Block 1 au value 1000
item details
activity no 100000000 - painting at E16.- 10 QTY- rs 100 and net value 1000
because i want to create ASN for 1 Qty,value Rs 100. how to get these details in portal?
system created inbound delivery after i have create the ASN in SRM . actually i want to create SES.
is there any confi required(process code etc).
help required
regds
Rami reddy

XML message failing in the SUS side for vendor replication from ERP

Dear Experts,
We have configured MM-SUS scenarios in our environment of SRM 7.01/ECC 6 ehp 5.
We are trying to replicate the Vendor master from ECC to SUS using PI ( idoc message ZCREMAS_SUS_MM)).
The message is successully processed in the PI. It is failing in the SUS side.
The exception is as below:
An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B (Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength Kernel ErrorId: ST_CONSTRAINT_MAXLENGTH) XML Bytepos.: 607 XML Path: ns0:SupplierPortalTradingPartner(1)TradingPartnerOrganization(2)Address(8)HouseNumber(6) An error occurred when deserializing in the simple transformation program /1SAI/SASF5486DA19E3520591A1B Length of "123 JALAN TIMUR" exceeds maximum length "10", specified with tt:maxLength</SAP:Stack>
Where I can change the settings to allow the maximum length of 10?
Any input will be highly appreciated.
Thanks and regards,
Ranjan

Hi,
Note 1510484 - SUS: Order longtext in message area displayed incorrectly
Note 1559121 - SUS: Long texts are getting broken in PCO (POR)document
Given notes are not exactly related to the problem. Let me know if notes could work for the current issue.
Regards,

EDI Standard used in SRM-SUS for Purchaser - Vendor Document Exchange?

Hi Forum,
For exchange of electronic documents like ASN, PO, PO Response, Confirmations etc. between buyer and seller, which EDI standard is used in SRM-SUS?
Say there are two different vendors one from North America using ANSI X 12 as EDI Standard and other from Europe using EDIFACT, how is the document exchange handled for these two different seller / edi standard in same SUS system?
Thanks,
Anubhav

Hi,
I am not sure what standard SAP uses, but it is not really relevant. At least not for the SUS scenarios. The IDOCs from ECC will be sent to the PI system which will convert them to XML format and send it to the SUS system. Since both PI and ECC system are from SAP, they will speak the same EDI standard for sure.
For SUS we have two scenarios, SRM-SUS and MM-SUS. In SRM-SUS the PO is created in an SRM system locally and sent to SUS. All communication will take place between these two system via XML messages on both sides (of course a PI system is mandatory in this case as well).
In the MM-SUS scenario the PO will be created in ECC and transferred to SUS. Depending on ECC release there are two different possibilities for this, either the ECC system sends EDI IDOCs or it sends XML messages directly. IDOCs will be mapped to XML by PI in all cases, as the SUS system will always receive and send XML messages only.
regards
Zoltan

Update the Vendor master from Employee master - PRAA

Hi
I need to know the process of updating multiple vendors from multiple employee data .i.e.bank,address and pernr.
I was using PRAA transaction but it was not updating ...i think i miss some entries..especially file path...
what are the steps need to be taken care of ...what should be in the file in the file path?
please let me know
Thanks

Thanks Rob
I checked the documentation..and found my error...actually the PRAA is updating vendor with employee data only when the employee number(PERNR) is updated in Vendor master...so i updated the field PERNR in Accounting section of Vendor then i ran the transaction PRAA it worked...it created the session and i processed the session..
My question is ..is the PERNR is mandatory in Vendor master record?
and How iam going to update the multiple vendor records with multilple Employee records? since the vendor for Reference is the single filed?
Please let me know
Thanks
Govi

PO replication from SRM to SRM -SUS

Hello Guys
How to replicate a PO from SRM to SRM SUS Client in case of PO created in SRM SUS scenario.
Any configuration and back ground job needs to be scheduled. Also for the corresponding documents from SRM to SUS and Vice versa.
Second, why middle ware PI is used for replication of vendors from SRM to SRM SUS as they both deploy on same system with different client.
Please reply guys
Thanks.
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:53 AM
Edited by: santhosh.s on Feb 13, 2012 8:57 AM

Hi Santosh,
As you are using extended classic scenario for transferring PO from SRM EBP to SRM SUS.
You can schedule a report RSPPFPROCESS for every minute with following varient
Application - BBP_PD
Action Profile - BBP_PD_PO
Action Defination - STANDARD_PO
Promotion Status - (0) Not Processed
and also select Processing withhout dialog checkbox.
Regards,
Pawan Keshwani

Sending RFQs from SRM EBP to SRM SUS

Hi All,
Am having scenario that i need to send RFQs from SRM EBP to SRM SUS.
& SAP provided Standard Content & that was imported in to IR.
In EBP I have Standard Interface for RFQ as RequestForQuotation_Create_Out in namespace http://sap.com/xi/EBP.
In SUS am not having such type of standard interface as RequestForQuotation_Create_in.
Can anybody please tell me which interface i can use or what terminology is using for RFQ in SUS.
Best Regards
siva

Hi,
Thanks for reply.
We have done following
1.Customer Settings - https://sandboxsrm5.bhelhyd.co.in:8400/sap/bc/gui/sap/its/bbp_bid_inv
2. Maintain Systems for Synchronization of User Data -
Function modules for Create, Change , Delete has been given with Activation & User procurement BP ID ticked.
3. System parameter
login/accept_sso2_ticket: 1
login/create_sso2_ticket: 2
4. STRUSTSSO2 - Can please elaboarte what exactly we need to do?
5. We have given Roles SAP_EC_BBP_BIDDER & SAP_EC_SUS_BIDDER to vendor in SUS.
We are not able see bids in Vendor login in SUS. but we are able to see PO's in same login.
Regards,
Shiva

How to transfer vendor master from MM to SUS?

Hi friends
How to transfer vendor master from MM to SUS
Are the following steps correct
1.create vendor master in MM
2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
3.use BD15 in SRM to accept the master data from MM.
Please let me know if i am wrong
Thanks
Vinny

Hi Vinny,
Please follow below steps for transferring vendor master from MM to SUS.
!) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
2)Go to BD14 and enter following fileds
Vendor number
Class
Message type
Target System...
Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
Before repliating vendor, please note that vendor root org unit has been created in SUS system.
After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check in SUS.....
If useful points please...
Thanks
Ravi

SRM-SUS 7.0 - Updating Vendor Bank from BP Bank Details

Similar Messages

Maybe you are looking for