Srw package: Catching REP- errors

IN SRW package by Philipp Weckerle there's lines that look like those:
r_staRec.JobIdent.JobID := GetValueFromXML(p_XMLDocument, 'job', 'id');
if ((r_staRec.JobIdent.JobID is null) or (r_staRec.JobIdent.JobID = ''))
then -- got error
r_errStr := GetValueFromXML(p_XMLDocument, 'error', 'component') || '-' ||
GetValueFromXML(p_XMLDocument, 'error', 'code') || ':' ||
GetValueFromXML(p_XMLDocument, 'error', 'message');
print_debug_message(r_errStr);
raise REQUEST_FAILED;
else -- no error
I.e. if report fails, I can't get the particular error number. Although it is extracted from XML reply (p_XMLDocument, 'error', 'code'), it is used only to print dubug message and discarded.
The questuins are:
1. Is there any newer version of the package in which that issue was fixed?
2. If no, are we allowed to modify the package ourselves to fulfil our tasks?

Your not seeing the built in package for some reason.
Maybe they are missing on your Linux machine.
Reinstall reports there? Examing your environment variables?
Is that rwrun.jar anywhere?

Similar Messages

ERROR:SRW Packages to call report from PL/SQL.

Hi,
I am facing the following problem while calling a report from PL/SQL Block.
This is my code
SRW.Start_Debugging;
     MYPLIST :=SRW_PARAMLIST(SRW_PARAMETER('',''));
     SRW.ADD_PARAMETER(myPlist,'GATEWAY'     ,'http:..............');
     SRW.ADD_PARAMETER(myPlist,'USERID'      ,'CGIA_AUTO/AUTO_DEV@ipaddress/ORCL');
     SRW.ADD_PARAMETER(myPlist,'SERVER'      ,'rep_cgian');
     SRW.ADD_PARAMETER(myPlist,'REPORT'     ,'PGIRCGIC047.rdf');
     SRW.ADD_PARAMETER(myPlist,'DESTYPE'     ,'file');
     SRW.ADD_PARAMETER(myPlist,'DESFORMAT'     ,'pdf');
     SRW.ADD_PARAMETER(myPlist,'DESNAME'     ,'\\ipaddress\CGIA_FormPrint\WatchFolder\OTHERS\'||Z.CS_REMARKS_BL||'_'||Z.CS_CHQ_NO||'_'||M_SEQ_NO||'-'||Z.CS_FLEX_07||'-'||Z.CS_FLEX_08||'.pdf');
     SRW.ADD_PARAMETER(myPlist,'PARAMFORM'     ,'NO');
     SRW.ADD_PARAMETER(myPlist,'P_1'     ,Z.CS_BANK_CODE);
     SRW.ADD_PARAMETER(myPlist,'P_2'     ,Z.CS_BAD_ACNT_NO);
     SRW.ADD_PARAMETER(myPlist,'P_3'     ,Z.CS_CHQ_BOOK_ID);
     SRW.ADD_PARAMETER(myPlist,'P_4'     ,Z.CS_CHQ_NO);
     SRW.ADD_PARAMETER(myPlist,'P_5'     ,Z.CS_CHQ_NO);
     MYIDENT:=SRW.RUN_REPORT(MYPLIST);
MYSTATUS := SRW.REPORT_STATUS(MYIDENT);
     SRW.STOP_DEBUGGING;
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://...
*** Length of Paramlist : 2
OK : Parameter added : USERID=CGIA_AUTO/AUTO_DEV@ipaddress/ORCL
*** Length of Paramlist : 3
OK : Parameter added : SERVER=rep_cgian
*** Length of Paramlist : 4
OK : Parameter added : REPORT=PGIRCGIC047.rdf
*** Length of Paramlist : 5
OK : Parameter added : DESTYPE=file
*** Length of Paramlist : 6
OK : Parameter added : DESFORMAT=pdf
*** Length of Paramlist : 7
OK : Parameter added :
DESNAME=\\ipaddress\CGIA_FormPrint\WatchFolder\OTHERS\CUST000115_102024_16--.pd
f
*** Length of Paramlist : 8
OK : Parameter added : PARAMFORM=NO
*** Length of Paramlist : 9
OK : Parameter added : P_1=SDNB
*** Length of Paramlist : 10
OK : Parameter added : P_2=7000674257
*** Length of Paramlist : 11
OK : Parameter added : P_3=7000
*** Length of Paramlist : 12
OK : Parameter added : P_4=102024
*** Length of Paramlist : 13
OK : Parameter added : P_5=102024
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built :
http://ipaddress/reports/rwservlet?&USERID=CGIA_AUTO%2FAUTO_DEV%40ipaddress%2FORCL&SERVER=rep_cgian&REPORT=PGIRCGIC047.rdf&DESTYPE=file&DESFORMAT=
pdf&DESNAME=%5C%5Cipaddress%5CCGIA_FormPrint%5CWatchFolder%5COTHERS%5CCUST00
*** Submitting HTTP Request
*** using URL
:http://ipaddress/reports/rwservlet?&USERID=CGIA_AUTO%2FAUTO_DEV%ORCL&SERVER=rep_cgian&REPORT=PGIRCGIC047.rdf&DESTYPE=file&DESFORMAT
=pdf&DESNAME=%5C%5Cipaddress%5CCGIA_FormPrint%5CWatchFolder%5COTHERS%5CCUST0001
OK : Request submitted - Return stream : <?xml version = '1.0' encoding =
'ISO-8859-1' standalone = 'yes'?>
<serverQueues>
<error code="503"
component="REP" message="You did not specify the name of a
report."/>
</serverQueues>
Here in this case even though i specify the report id in the parameter,debugger message says that 'You did not specify the name'.
The same code is working in some other server and giving the pdf output.
Thanks in advance for any clarification.

Hello Chirag,
If you want to invoke and run a report from your PL/SQL code in the database, you can do so by installing and using the SRW package supplied with Reports. This package allows you to run parametrized report jobs on a specified Reports Server from your PL/SQL program and track the job status. Please take a look at the documentation for this package in the Publishing Reports manual on OTN at: http://download-west.oracle.com/docs/html/A92102_01/toc.htm.
On the other hand, if you just need to invoke the Reports Builder program from your PL/SQL routine, you would need to use the default builtin for calling external applications from PL/SQL.
Thanks,
The Oracle Reports Team.

Using SRW package to send a report via email

Hi,
Please can someone please help me resolve this issue I have been facing in using the srw package
I have configured a report server and was trying to use the srw package to send a report out to our customers when there is an update on a particular table.
I have succesfully use this same procedure to generate the same report to an output file and it was ok but anytime I try to generate the report as a mail and send to a DESNAME, i get mail server unavailable.
Below is the procedure i try to execute:
procedure testrep(new_name in varchar2) as
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
BEGIN
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://technorth4:7780/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','rep_technorth4');
srw.add_parameter(myPlist,'REPORT','c:\gens\name.rdf');
srw.add_parameter(myPlist,'USERID','gens/[email protected]');
srw.add_parameter(myPlist,'AUTHID','orcladmin/password1@orcl');
srw.add_parameter(myPlist,'DESTYPE','MAIL');
srw.add_parameter(myPlist,'DESFORMAT','PDF');
srw.add_parameter(myPlist,'FROM','[email protected]');
srw.add_parameter(myPlist,'DESNAME','[email protected]');
srw.add_parameter(myPlist,'T1',new_name);
myIdent := srw.run_report(myPlist);
END;
when i now start debugging i got this error:
SQL> set serveroutput on
SQL> exec srw.start_debugging
* WELCOME TO EVENT-BASED-REPORTING API *
* API-Version : 9i *
* (C) Oracle Corporation, 2000 - 2002 *
* Debugging turned ON **************************
PL/SQL procedure successfully completed.
SQL> exec testrep('TOPE');
*** Length of Paramlist : 1
OK : Parameter added : GATEWAY=http://technorth4:7780/reports/rwservlet
*** Length of Paramlist : 2
OK : Parameter added : SERVER=rep_technorth4
*** Length of Paramlist : 3
OK : Parameter added : REPORT=c:\gens\name.rdf
*** Length of Paramlist : 4
OK : Parameter added : USERID=gens/[email protected]
*** Length of Paramlist : 5
OK : Parameter added : AUTHID=orcladmin/password1@orcl
*** Length of Paramlist : 6
OK : Parameter added : DESTYPE=MAIL
*** Length of Paramlist : 7
OK : Parameter added : DESFORMAT=PDF
*** Length of Paramlist : 8
OK : Parameter added : [email protected]
*** Length of Paramlist : 9
OK : Parameter added : [email protected]
*** Length of Paramlist : 10
OK : Parameter added : T1=TOPE
Starting run_report: building url
*** Building URL (RUN_REPORT)
OK : URL built :
http://technorth4:7780/reports/rwservlet?SERVER=rep%5Ftechnorth4&REPORT=c%3A%5Cg
ens%5Cname%2Erdf&USERID=gens%2Fgens%40technorth%2Eworld&AUTHID=orcladmin%2Fpassw
ord1%40orcl&DESTYPE=MAIL&DESFORMAT=PDF&FROM=tope%5Folowosale%40gtbplc%2Ecom&D
*** Submitting HTTP Request
*** using URL
:http://technorth4:7780/reports/rwservlet?SERVER=rep%5Ftechnorth4&REPORT=c%3A%5C
gens%5Cname%2Erdf&USERID=gens%2Fgens%40technorth%2Eworld&AUTHID=orcladmin%2Fpass
word1%40orcl&DESTYPE=MAIL&DESFORMAT=PDF&FROM=tope%5Folowosale%40gtbplc%2Ecom&DES
OK : Request submitted - Return stream : <?xml version = '1.0' encoding =
'ISO-8859-1' standalone = 'yes'?>
<serverQueues>
<error code="50138"
component="REP" message="Mail server is not available"/>
</serverQueues>
OK : Request submitted - Length of stream : 182
*** XML-Parsed - Following Structure discovered :
*** Checking elements!
serverQueues ()
*** Checking attributes!
error
*** Checking attributes!
__code = 50138
__component = REP
__message = Mail server is not available
*** Finished Parsing XML
Getting value for element: job
Getting value for element: error
*** Requesting value for Attribute error.component [REP]
Getting value for element: error
*** Requesting value for Attribute error.code [50138]
Getting value for element: error
*** Requesting value for Attribute error.message [Mail server is not available]
REP-50138:Mail server is not available
BEGIN testrep('TOPE'); END;
ERROR at line 1:
ORA-20999:
ORA-06512: at "GENS.SRW", line 284
ORA-06512: at "GENS.SRW", line 815
ORA-06512: at "GENS.TESTREP", line 17
ORA-06512: at line 1
Please can someone help me with this. I can connect to the mail server using the telnet mailservername port,i get a 220 message with ***** .
I have updated d report configuration file with the mailserver name, and d proxyinfo.xml too.I put it to bypass proxy for d mail server address and also inlclude the proxy ip and port.
Kindly assist me as it is urgent.
Thank you.

You are in the wrong forum. Please try the Reports.<br><br>
Regards,
Rob.

SRW Package in Reports 2.5

I am having trouble running SRW.RUN_REPORT from batch mode in PL/SQL. First of all, I'm having trouble locating the SRW package that is standard in Reports 2.5, in order to to create the package. Do I need to locate the Version 2.5 disk and try a reinstall? Or is it as simple as creating a Public Synonym?
The PL/SQL code is: SRW.RUN_REPORT (module=mname batch=yes....
The Error is: "module" must be declared.
This tells me that the SRW package is not known. Else it would not ask me to make a declaration of the keyword "module". Big Thanks to anyone who can help.

What are the default location for log files,trace for forms server and reports server in weblogic.That depends on which Reports Server you are using (Standalone or Inprocess). Here are the locations for both:
Standalone*
$ORACLE_INSTANCE/diagnostics/logs/ReportsServerComponent/<Name of Report Server>/
In-Process*
$DOMAIN_HOME/servers/WLS_REPORTS/logs/reports/
Craig...

Using SRW Package - Help

Hello All,
I've designed web based reports having a web layout. The user usually navigates from one report to another by way of ">
<th <rw:id id="HFMONTH131" breakLevel="RGMONTH1313" asArray="yes"/> class="OraRowHeader" style="font-weight: normal" ><rw:field id="FMONTH131" src="MONTH" breakLevel="RGMONTH1313" breakValue=" " formatTrigger="STYLE1"> F_MONTH </rw:field></th></a>
I'm aware of reports being opened,errors captured,messages displed & programs aborted using the various srw packages when called from inside a program unit.
Is there a way to call a program unit when the user clicks on a particular field which is supposed to be a link to another report instead of the above mentioned hyperlink method. Like for instance we have a formatTrigger for calling a program unit written for manipulating the format of the output.
Regards,
Arun.V

Hello,
Web Layout only exists in Reports versions >= 9.0.2. In these versions, the object "Button" no more exists.
When the output is displayed, the reports execution is terminated, so it is not possible to call a program unit when the user click on a field.
In the Reports Online Help:
Note: The ability to create a button in the Paper Layout view is no longer supported in Oracle Reports 10g. Use hyperlinks instead. If you open an existing report that contains buttons, the buttons will be converted into text items.
Regards

How can I catch a error in a BAPI?

Hi,
I use BAPI L_TO_CREATE_MULTIPLE. If, for example, I put a warehouse that not is the warehouse of the unit that I want to move, I receive an error that isn't in exceptions.
In the program, I need, in the sy-subrc, catch this error, to do anything.
In this case, the message is L3208.
Thank you very much.

Hello Jose
BAPIs must not raise any exceptions. Why? Because they are intended for external use. However, if you raise an exception during a RFC call the connection will break down. Therefore BAPIs collect the error message in their (usually named) RETURN parameter.
In order to evaluate a BAPI call you can simply code like this:
" Assumption: RETURN parameter is an itab of type BAPIRET2
LOOP AT return TRANSPORTING NO FIELDS
WHERE ( type CA 'AEX' ).
EXIT.
ENDLOOP.
IF ( syst-subrc = 0 ).
" A(bort), E(rror) or X(dump) happened
ENDIF.
Regards
Uwe

Catch the error in to a log file

Hi Team,
Created the script for testing the server online or offline, Could you please tell me how to catch the error in to a file
Try
$Result = Test-Connection -count 1 -computer (Get-Content ServerName.txt) -ErrorAction "Continue"
Catch
   $Result = New-Object PSCustomObject -Property @{
            TimeStamp = Get-Date
            __Server = $env:COMPUTERNAME
            Address = $Computer
            Protocol = ""
            ResponseTime = "Failed"
$Result | Select TimeStamp,__Server,Address,ProtocolAddress,ResponseTime | ft -AutoSize

As mjolinor pointed, you should change the -ErrorAction to Stop to make the control flow into catch block when error occurs. Just change alone is not sufficient because, the control will go to catch block if any of the computer in servername.txt gives error,
and it will not go back to next computer in your text file perform the ping.
So try chaning the code as shown below.
$Outarr = @()
foreach($Comp in (Get-Content C:\temp\servers.txt)) {
Try {
$Result = Test-Connection -count 1 -computer $Comp -ErrorAction stop
Catch {
$Result = New-Object PSCustomObject -Property @{
TimeStamp = Get-Date
__Server = $env:COMPUTERNAME
Address = $Comp
Protocol = ""
ResponseTime = "Failed"
$Outarr +=$Result
$Outarr| Select TimeStamp,__Server,Address,ProtocolAddress,ResponseTime | ft -AutoSize
Hope this helps.
Thanks,
Sitaram Pamarthi
Blog : http://techibee.com
Follow on Twitter
This posting is provided AS IS with no warranties or gurentees,and confers no rights
You can simplify that to:
$Outarr =
foreach($Comp in (Get-Content C:\temp\servers.txt)) {
Try {
Test-Connection -count 1 -computer $Comp -ErrorAction stop
Catch {
[PSCustomObject]@{
TimeStamp = Get-Date
__Server = $env:COMPUTERNAME
Address = $Comp
Protocol = ""
ResponseTime = "Failed"
$Outarr | ft -AutoSize
The [PSCustomObject] type accelerator will take the hash table as a constructor, and coerce it to an [ordered] hash table, so the properties will stay in the same order they were declared. That eliminates the need to use Select-Object afterward to
get them back into the right order.
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

I am getting the following error: Unable to authenticate the package: B_SPACE_NUTRITION.itmsp ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)

I am getting the following error when attempting to deliver my iBooks Author book package via iTunes Producer: "
Unable to authenticate the package: B_SPACE_NUTRITION.itmsp
ERROR ITMS-9000: "OPS/ibooks.ncx(5): element "content" not allowed yet; missing required element "navLabel"" at Book (MZItmspBookPackage)"
I understand that there's something wrong with the TOC file (.ncx), but I have tried everything and nothing seems to work. Every section of the TOC is labeled, so not sure why the navLabel issue is happenening.
Any help is GREATLY appreciated! Thank you.

Similar issues looks like. Are you using a template other than those in iBooks Author? That's what I did, and that was definitely part of the issue.
After digging through .ibooks code for hours and still not seeing the problem, I decided to reach out to one of the Apple epub conversion affiliates in iTunes Connect. They said they could repair the file without a problem, started working on it, only to come back a week later and say they couldn't work on .ibooks or .iba files yet.
So, in complete frustration, I decided to transfer my content page by page from the blank template I downloaded from a vendor online to one of the "textbook" templates in IBA. This was a long process as I had to unlock and clear out the formatting of the template. But, once that was done and content was transferred over, all was good. I submitted/delivered the same content and preview book within the new template and it went right through the first time (all metadata was exactly the same as well).
Now, the iBookstore approval waiting process begins!
Good luck!

Catch all error information while validating xml content with xsd schema

Hi experts,
I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below is a part of my java mapping.
XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
parser.setFeature( "http://xml.org/sax/features/validation" , true);
parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); // schema is my schema name
parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends DefaultHandler
parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
// In error handler, I comment all code so as not to throw any exception
public class ParseErrorHandler extends DefaultHandler
     public void error(SAXParseException e) throws SAXException
          // sSystem.out.println("Error" + e.getMessage());
          // throw e;
     public void fatalError(SAXParseException e)
          // throw e;
          // System.out.println("SAP Fatal Error" + e.getMessage());
Unfortunately the program always stopped while catching the first error. Check the below log.
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
ERRORS :
cvc-simple-type : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
cvc-data : information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is is not valid with respoct to the corresponding simple type definition.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' is associated with invalid data.
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]/:To[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]/:Header[1]' is not valid with respect to it's complex type definition..
cvc-element : element information item '/:ShipNotice[1]' is not valid with respect to it's complex type definition..
-> com.sap.engine.lib.xml.parser.ParserException:
I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error handler logic? Is there any body can make me get out of this?
Thanks.

<h6>Hi experts,
<h6>
<h6>I created a java mapping to validating the input xml content with xsd schema (schema validation). What I want is to catch all <h6>error message to the xml not just the first error. I used SAXParser in sapxmltoolkit.jar to do the schema validation. The below <h6>is a part of my java mapping.
<h6>XMLReader parser = XMLReaderFactory.createXMLReader("com.sap.engine.lib.xml.parser.SAXParser");
<h6>parser.setFeature( "http://xml.org/sax/features/validation" , true);
<h6>parser.setFeature( "http://apache.org/xml/features/validation/schema" , true);
<h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage", "http://www.w3.org/2001/XMLSchema");          <h6>parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaSource",this.getClass().getClassLoader().getResourceAsStream(schema)); <h6>// schema is my schema name
<h6>parser.setErrorHandler(new ParseErrorHandler()); // ParseErrorHandler is my own ErrorHandler which extends Default Handler
<h6>parser.parse(new InputSource(new ByteArrayInputStream(sinput.getBytes())));
<h6>
<h6>// In error handler, I comment all code so as not to throw any exception
<h6>public class ParseErrorHandler extends DefaultHandler
<h6>{
<h6>     public void error(SAXParseException e) throws SAXException
<h6>     {
<h6>          // sSystem.out.println("Error" + e.getMessage());
<h6>          // throw e;
<h6>     }
<h6>
<h6>     public void fatalError(SAXParseException e)
<h6>     {
<h6>          // throw e;
<h6>          // System.out.println("SAP Fatal Error" + e.getMessage());
<h6>
<h6>     }
<h6>
<h6>}
<h6>
<h6>Unfortunately the program always stopped while catching the first error. Check the below log.
<h6>
<h6>com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException:
<h6>ERRORS :
<h6>cvc-simple-type : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is not valid, because it's value does not satisfy the constraints of facet 'minLength' with value '1'.
<h6>cvc-data : information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is is not valid with respoct to the corresponding simple type definition.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]/:CityName[1]' <h6>is associated with invalid data.
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]/:AddressInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]/:PartnerInformation[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]/:To[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item <h6>'/:ShipNotice[1]/:Header[1]' <h6>is not valid with respect to it's complex type definition..
<h6>cvc-element : element information item '/:ShipNotice[1]' is not valid with <h6>respect to it's complex type definition..
<h6> -> com.sap.engine.lib.xml.parser.ParserException:
<h6>
<h6>
<h6>I tried using Xerces and JAXP to do validation, the same error happened. I have no idea on this. Does xi has its own error <h6>handler logic? Is there any body can make me get out of this?
<h6>Thanks.

What is the best Resolution for this Error: Failed to execute IS server package because of error 0x80131904. Server:

Dear Forum Members,
I have an SSIS running perfectly when i run it in Visual Studio Shell. I have organized it into a job which runs well on SQL Server agent at intervals.
However, suddenly, i started having this error as stated in the title. Please find details of the error below and kindly help resolve it ASAP.
Error Details:
Date 1/27/2015 11:24:00 AM
Log Job History (FmdqSync)
Step ID 1
Server ITGTESTSERVER
Job Name FmdqSync
Step Name S1
Duration 00:00:30
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:24:00 AM Failed to execute
IS server package because of error 0x80131904. Server: ., Package path: \SSISDB\FMDQSync\FMDQServerDataSync\FMDQServerDataSync1.dtsx, Environment reference Id: NULL. Description: Timeout expired. The timeout period elapsed prior to completion of
the operation or the server is not responding. The statement has been terminated. Source: .Net SqlClient Data Provider Started: 11:24:00 AM Finished: 11:24:30 AM Elapsed: 30.187 seconds. The package execution
failed. The step failed.

Hi Sadeeq,
Based on your description and the error message, it should be a timeout issue when the ADO .NET Source connects to the source database. So, please refer to the following two suggestions:
Double click on the ADO .NET Connection Manager, click the All tab, and set the “Connect Timeout” property to a bigger value. By default, it is 15 seconds.
Increase the DefaultBufferSize value of the Data Flow Task. By default, the DefaultBufferSize is 10 (MB), you can increase it to a value that is less than 100 (MB).
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to catch Posting error in File to IDoc Scenario?

I have successfully completed File to IDoc Scenario. Now I am interested in catching posting error. i.e., if mapping goes well and when IDoc is being sent to Recipient system then if any posting error is encountered, then a mail should go to a recipient.
Can anybody suggest the solution.
Regards,
Suraj Kumar

Hi Suraj,
this can be done by triggerring an alert to the recipient.chk out these links to trigger a alert
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
/people/sap.user72/blog/2005/01/14/alert-management--improving-monitoring-of-your-landscape
regards
jithesh

Catch Mapping Errors on the Exception Hander in a BPM

Hi All
I am struggling to catch maping error in the Exception Handler, so my question is that, is it possible the catch mapping errors in the Exception Handler using BMP
Thanks
Yonela

Hello Yonela!
In the Transformation Step properties you can specify the exception handler in case the step fail. For more information, please check the help pages below
Events:
http://help.sap.com/saphelp_nw72/helpdata/en/76/9856e633464052a47270ea6c49640a/content.htm
Modeling Exceptions and Exceptions Handling:
http://help.sap.com/saphelp_nw72/helpdata/en/54/bf98c82cd84614a85cfda25d70b175/content.htm
Best regards,
Lucas Santos

How to catch the error occurred in Integration Process, and then save it?

1. how to catch the error occurred in Integration Process, and then save the detailed error message to the file?
2. there are fault message type for inbound message interface, how to use the fault message type in IR?
Thanks,
Michael
Message was edited by: Spring Tang
inital
Message was edited by: Spring Tang
detailed message output
Message was edited by: Spring Tang
fault message type

Hi Spring,
If u give an exception step along with your Transformation Step, whenever some error occurs in your message mapping, this exception block wil be triggered.
You can configure your exception block to do all exception processing that you want. This exception handling is like any other java Exceptio n Handler. You can do anything that you want in your exception handler block on the basis of your requirements.
<i>If an exception is triggered at runtime, the system first searches for the relevant exception handler in surrounding blocks. If it does not find the correct exception handler, it continues the search in the next block in the block hierarchy.
When the system finds the correct system handler, it stops all active steps in the block in which the exception handler is defined and then continues processing in the exception handler branch. Once the exception handler has finished processing, the process is continued after the block.
If the system fails to find an exception handler, it terminates the integration process with an error.</i>
Regards,
Bhavesh

Catching all errors

Hi
is there a way to catch all errors, I know you can do try and
catch fro your code
about how about errors that come from built in Flex component
I am trying to catch all errors and show it to the user in
better format
but most important, it seems flex will be frozen and you can
do anything if the error is not caught and the only way around it
to restart your browser
Please help
Thanks
Kasem

Everything I read suggests that this isn't possible in Flex.
It seems that uncaught exceptions are handled by the Flash player.
This link discusses the problem in Flex 1.5 and it notes the
problem is not fixed in Flex 2.
http://www.mail-archive.com/[email protected]/msg25874.html
I'm going to continue to look. I really can't imagine that
Adobe spent all that time reworking Flex and didn't address this
problem.

Catching an error on a single line

Is there a way to catch an error on a single line in a VBS script? From what I understand the "On Error Resume Next" will apply to all lines in a procedure.
George

Hello George,
unfortunaly there is no way in VBS like the On Error Goto xxx in VB/VBA. You have to encapsulate the crtitcal lines with a On Error Resume Next/On Error Goto 0 pair and find an error with if Err.Number <> 0 then after every line and handle it e.g. with a Exit Sub call.
Matthias
Matthias Alleweldt
Project Engineer / Projektingenieur
Twigeater?

Srw package: Catching REP- errors

Similar Messages

Maybe you are looking for