SRW.SET_HYPERLINK without USERID, How ?

I run a report in which I want to drill to another report passing some parameters.
I use srw.set_hyperlink(/reports/rwservlet.....) and it works fine.
However I'm forced to set userid and password in the url and this is a big hole in the security.
How can I avoid this ?
Is there any way to run that report in the same context of the running one ?
Another solution could be logon using a dummy user and then, in the report logon again with the correct one, however I didn't find the way (any LOGON od CONNECT procedure).
Could someone suggest a solution ?
Tks
Tullio
P.S.: I can't use SSO

Hello,
You can launch the first URL with an userid like :
userid=username@database
The Database Authentication page will de displayed and a cookie will be stored in the memory browser when you 'll provide the password.
It will be possible to call other reports without specifying userid. The one stored in the cookie will be used ..
Regards

Similar Messages

How to use srw.run_report without userid parameter in 10g

I have the following function which works fine when I supply the userid parameter.
Is it possible to run srw.run_report without the userid? If not is there another way to run a batch report to create a file?
create or replace
FUNCTION SUNRESDS(vopersorjudicial varchar2)
RETURN VARCHAR2 as
myPlist SRW_PARAMLIST;
myIdent SRW.Job_Ident;
BEGIN
myPlist := SRW_PARAMLIST(SRW_PARAMETER('',''));
srw.add_parameter(myPlist,'GATEWAY','http://xxx.xx.xxx.xx/reports/rwservlet');
srw.add_parameter(myPlist,'SERVER','rep_172_FRHome1');
srw.add_parameter(myPlist,'REPORT','d:\oracle\FRHome_1\forms\sunresds.jsp');
srw.add_parameter(myPlist,'USERID','username/password@databasename');
srw.add_parameter(myPlist,'DESTYPE','file');
srw.add_parameter(myPlist,'DESFORMAT','PDF');
srw.add_parameter(myPlist,'popersorjudicial',vopersorjudicial);
srw.add_parameter(myPlist,'DESNAME','d:\Reports\unresolved_discrepancies.pdf');
myIdent := srw.run_report(myPlist);
return 'Y';
EXCEPTION
when others then
return ('sunresds ' || sqlerrm);
END;

Did you solve your problem? How did you do?

Srw.set_hyperlink

hi
srw.set_hyperlink('http:\\jeet-683c5b1609:8888/reports/rwsservlet?report=C:\projectfinal\stock_report.rdf&userid=zensol1/vikas@orcl&destype=cache&desformat=html&dd'||:stock.item_code);
-- bad bind variable stock.item_code
i have report with the name of stock_report
i create a menu and write this code in that but bumistake error occur
please help
or give suggesion how i remove this
thanks

srw.set_hyperlink('http:\\jeet-683c5b1609:8888/reports/rwsservlet?report=C:\projectfinal\stock_report.rdf&userid=zensol1/vikas@orcl&destype=cache&desformat=html&dd'||:stock.item_code);Seems as if :stock.item_code is an item in the form the menu is attached to?
In a menu you have to access the item using NAME_IN('stock.item_code');
srw.set_hyperlink('http:\\jeet-683c5b1609:8888/reports/rwsservlet?report=C:\projectfinal\stock_report.rdf&userid=zensol1/vikas@orcl&destype=cache&desformat=html&dd'||NAME_IN('stock.item_code'));btw: isn't SRW.SET_HYPERLINK a reports-command? Never seen that being used in a forms-menu. Would like to know if it works.

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

SRW.SET_HYPERLINK - Handle SPACE in filename AND open in NEW WINDOW

Report 10g (10.1.2.3.0 - 32bit on Windows 7 64bit)
Issue #1:
using srw.set_hyperlink to get a handle on *.pdf file on remote server. Report is launched as PDF. PDF that is opened via the URL launches in same window as report. I need run report as PDF, click hyperlink to get handle on another file which should launch in New Window.
SRW.SET_HYPERLINKATTR only useful with HTML and HTMLCSS. Javascript? If so, sample code?
Issue #2:
possible that file retrieved will have spaces in its name. Hyperlink defaults %20 in the spaces of the name, but the link does not successfully retrieve file. Tried replacing spaces w/ %20, but like defaults does not retrieve document; due to actual file name not having the %20 in its actual name. Is there are way to account for the spaces in the URL then "remove" them to find the correct file and open in new window?
Tried using virtual path as well as physical path.
Help with either or both issues is truly appreciated,
Thanks!!

Hello,
When you set the property "Hyperlink", the property "Additionnal Hyperlink Attributes (HTML)" is displayed. Set this property to :
target="_blank"
Regards

Can anyone help me in iphone mobile, i had lost my data in phone, because i restore my phone without backup, how can i get my old data, i lost my photos and videos... help me

can anyone help me in iphone mobile, i had lost my data in phone, because i restore my phone without backup, how can i get my old data, i lost my photos and videos... help me

Sorry Raj,
If you did not back up your information, and you have now restored your phone, then your information is not recoverable.
Sorry,
GB

I started downloading an update without knowing how big the file was and when I found out how big it was decided I didn't want it because I probably won't use it. how do I stop, not pause, the download and remove the file?

I started downloading an update for iphoto and imovie without realizing how big the file was and I really don't want these updates because I probably won't use them. I've paused the updates but don't know how to cancel them. Please let me know how to do so.

Hide the purchase in your account and there should be nothing more from it.
http://support.apple.com/kb/HT4919

Do iPhone back up without wifi- how?

A friend has a new iPhone.
No computer and no wifi.
So how does one ..
Do iPhone back up without wifi- how?
Thanks

Michael Vallance wrote:
Back up to the icloud account I mean.
No computer and no wifi. = No Backup
How to BackUp > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584

Without IM how can i settle construction project to AUC and asset

Dear all
without IM, how can i settle construction project to AUC and asset.
can someone explain it in details?
thanks a lot.
Judy

thanks for all of your answers.
i create the investment profile and assgin it to the project profile.
when i release the project, i see the system status changed from crtd to release and AUC.
when i do cj88, the costs are settled to the AUC No. automatically.
could you tell me how the AUC No. is created? where does it configure?
when AUC is settled to FXA, what are the procedures?
first TECO the project and then do CJ88, am I correct?
thanks a lot
Judy

Web report without userid and password

Hi Experts,
I exported a BW web report to excel spreadsheet and sent it through mail to others, When recepients tried to open that exported spreadsheet, It is prompting for userid and password. I dont want this to be happened and it should open without asking userid / passsword? Can any one suggest some clues onthis.

Check to see if they are looking at the data or running the report. If they are running the report, then they will be prompted for the user id and password.
You can run the report for them and download the data only, then they will not get the prompts, however they will not be able to update the data or drill down.
Alternatively, you can use the Broadcaster to send out the updated reports directly to them.
Brian

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

TA26404 My new MacBook Pro came without iDvd, how do I get it?

How do I get iDvd on my new mac book pro computer, I can burn dvd's without it correct?

Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
Apple has clearly indicated in the newest Mac mini and Retina Display MacBook Pro that it plans to get rid of optical disc drives as soon as possible across the board, providing an external USB drive as an option for users who need one.
Users increasingly have fewer opportunities to use optical drives, as the bulk of third party software is now available as a digital download either directly from the vendor or through Apple's App Store. Apple also sees digital distribution as the future of music and movies, as exemplified in Apple TV, which has never included an optical drive.
The company has never supported any new HD optical disc formats on its products, including Microsoft's ill fated HD-DVD or Sony's Blu-ray format, despite initially being involved in the Blu-ray standardization process. Instead, Apple has put its resources behind developing increasingly higher definition audio and video formats that it can distribute electronically through its own iTunes Store.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

My iphone4 performed 2 backups, one with all my stuff on it and one without. How do I get my stuff from the previous backup?

In the process of updated to iOS 5, my iphone4 performed a backup, after installing IOS5 it performed ANOTHER backup (not sure why), but without all my stuff being synced from iTunes, now the backup file (and my phone) contain NOTHING!
How do I get the data from my previous backup back?!? Please Help!! I have already looked into the backup fies on my PC and everything is from the second backup.
I really need my contacts and photos back

Ok. I have 2 hard drives and one of them died apparently so..not knowing what to do, I did chose reinstall Lion after command r open start-up. The whole thing is a mess but my computer is back up and running with the second hard drive. I had a time machine backup which I've been dragging stuff out of. i had to re enter serial numbers and do all sorts of initial set up stuff. 1) How do I get all of my icons (like my HD icon and external drives icons) to appear on my desktop again? I can only find them through a finder window. 2) i now have to type a password to get into my computer (user) - I 'm the only user and don't want to have to do that.

WLC 5508 with AD, NPS but without GPO, how?

Hi,
I didn't found anything related to what I'm trying to do so I though I would create a new discussion...
I would like to setup a new WLAN and to be able to connect, a user will have to enter his username/password that will be confirmed using NPS and Active Directory. The problem is, I don't want to use a GPO, I would like to only verify if the user is a member of a AD group, let's say "wlan_access".
I don't want to install anything ( certificate, GPO, creating a WLAN configuration ) on the user's PC/laptop, only AD validation using NPS as a Radius server.
If a user is part of that AD group, after he enter his credential he will have access to that WLAN.
Is it possible to setup that? How should I configured the WLAN in my WLC 5508 ( running 7.2.110.0 )? How should I configure NPS ( Windows 2008 R2 Enterprise )?
Thanks a lot for your help and answers.
Guillaume

Hi guys,
With the info Stephen Rodriguez gave, it looks like I won't be able to do what we want without doing config on the user's devices ( laptop, ipad, etc.. ).
@Joseph Vasanth Louis Yes the message is from the event viewer of the NPS server. In the connection request policies, there's not much config, I let the option "Authentication Methods" in the tab Settings uncheck, so it won't override the settings in the Network Policies.
I though it was possible to have authentication using NPS and Active Directoy without installing anything on the user's devices and still having a secured wireless network ( not like a hotspot ).
The solution I think is the most workable is with the PEAP or PSK, with a certificate but even that...the user will have to create the WLAN profil on his laptop, so I'm not sure we want to go that way. I'll check for the PSK option, to see if the "Web Authentication" could be done using NPS.
Thanks guys for all your time and help. I'll continue my tests and keep you posted.

A Day Without Data - How Data is Transforming the Media Industry

From modern transportation to financial networks, we rely on digital data everyday whether it be at work, school, or play. And now, more than ever, this data needs to be carefully managed across different “boundaries,” without losing control. Considering how tightly integrated data is in our lives today, how did we ever get by without it?
Read on for our thoughts.

Great article. I agree that access to data has changed our lives. We take the opportunities for granted.

SRW.SET_HYPERLINK without USERID, How ?

Similar Messages

Maybe you are looking for