SS8: bug with templates & static?

Hello,
following code doesn't compile with SS8:
class A
public:
A() {}
template < typename T >
inline T & f()
static typename T def();
return def;
template < typename T >
inline void g()
T & def = f<T>();
void h()
g<A>();
The errror is
"staticref.cxx", line 10: Error: Initializing A& requires an lvalue.
Is this a bug?
TIA
My environment is:
$CC -V
CC: Sun C++ 5.5 Patch 113817-09 2004/08/03
$uname -a
SunOS dev420 5.8 Generic_108528-11 sun4u sparc SUNW,Ultra-80

Thank you for the quick reply!
First, I have to say that my core problem
is compiling the boost (1_31_0) library
Spirit.
The real error is
../boost_1_31_0/boost/spirit/core/non_terminal/impl/grammar.ipp", line 279: Error: Initializing base_expression_grammar<general_expression_grammar>::definition<boost::spirit::scanner<const char*, boost::spirit::scanner_policies<boost::spirit::skipper_iteration_policy<boost::spirit::iteration_policy>, boost::spirit::match_policy, boost::spirit::action_policy>>>& requires an lvalue.
1 Error(s) and 1 Warning(s) detected.
With my code, I tried to show the problem in a condensed form,
but it doesn't point out the real problem, which is far more subtile, I think.
Further, I have few other problems compiling this libray with SS8 for which I have found my
own workarounds. The authors of Spirit made the decision to not support any compiler
"not conform" to the standard for further development.
So the final question to answer is: Is it planned to support the Boost libraries in the near future?
Would be nice to get a definite answer in order to plan myself's further development.

Similar Messages

  • Dreamweaver CS3 bug with templates?

    Hello,
    I am having a very major problem with a template. I am on
    Dreamweaver CS3 and my template has been created in Dreamweaver 8
    and it says in parenthesis (xhtml) - even though all my pages from
    the template are html.
    When I now make even the most minor change (even adding one
    single letter) to my template or when I try to create a new page
    from that template, the resulting pages have missing images (my
    whole top banner), but the actual template looks perfect. You can
    actually seean example of a page on a test website at
    http://ww2.itrak.com/iTRAKnouveau/
    I seem to remember I actually had this problem once before
    and I did not have it in Dreamweaver 8 but I am not sure of my
    recollection.
    Unfortunately, this time I cannot access Dreamweaver 8
    anymore... I am really hoping someone can solve this one with me!!
    Christine

    nope
    Jo
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    > Sounds like it's not a DW problem after all....
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "josie1one" <[email protected]> wrote in
    message
    > news:[email protected]...
    >> There's this:
    >>
    >> body {
    >> background-color: #d3d5d6;
    >> margin-top: 0px;
    >> background-image: url(); <----------- no image
    defined
    >> background-repeat: repeat-x;
    >>
    >> and
    >>
    http://ww2.itrak.com/iTRAKnouveau/images/header_print.jpg
    >>
    http://ww2.itrak.com/iTRAKnouveau/images/header_itrack_4_01.jpg
    through
    >> to 4_24 don't appear to be on the server - Not
    Found. Can you check your
    >> site definition?
    >>
    >> --
    >> Jo
    >>
    >>
    >>
    >>
    >> "Strateege Health"
    <[email protected]> wrote in message
    >> news:[email protected]...
    >>> Hello,
    >>> I am having a very major problem with a
    template. I am on Dreamweaver
    >>> CS3 and
    >>> my template has been created in Dreamweaver 8
    and it says in parenthesis
    >>> (xhtml) - even though all my pages from the
    template are html.
    >>> When I now make even the most minor change (even
    adding one single
    >>> letter) to
    >>> my template or when I try to create a new page
    from that template, the
    >>> resulting pages have missing images (my whole
    top banner), but the
    >>> actual
    >>> template looks perfect. You can actually seean
    example of a page on a
    >>> test
    >>> website at
    http://ww2.itrak.com/iTRAKnouveau/
    >>> I seem to remember I actually had this problem
    once before and I did not
    >>> have
    >>> it in Dreamweaver 8 but I am not sure of my
    recollection.
    >>> Unfortunately, this time I cannot access
    Dreamweaver 8 anymore... I am
    >>> really
    >>> hoping someone can solve this one with me!!
    >>> Christine
    >>>
    >>
    >>
    >

  • Bug with template + navigation bar

    Greetings...
    I have created a site with DW CS3 and like many others before
    me, i can't edit a navigation bar added to the editable area of a
    page that uses my template.
    I can create one and save everything but i can't modify
    afterward.
    I always get the "making this change would require changing
    code that is locked by a template..." window.
    Thanks for any help

    It's quite simple, but we would need to know how you have
    built your
    navigation, and what your skill level is with HTML and CSS
    first. Can you
    post a link to the page, and tell us how well you know the
    underlying
    technology?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Liam McGrath" <[email protected]> wrote in
    message
    news:gkia5r$a39$[email protected]..
    > Hello, I?m new to dreamweaver so please excuse me for
    what may be a stupid
    > question. I have previously used golive, now using dw
    cs3. I have created
    > a
    > site based on a template file everything working fine. I
    was wondering if
    > there
    > was any way possible of having the navigation bar
    (created in the
    > template)
    > appear in the down or visited state when you entered a
    specific page or do
    > I
    > have to insert a separate navigation bar in each
    individual page. Can
    > someone
    > guide me if this is possible or has anyone any
    suggestions? Thanks
    >

  • Bug in rendering static list with Hierarchical Expanding template?

    Hi,
    on http://apex.oracle.com/pls/apex/f?p=23910 I prepared test case for my problem. It is static list with template Hierarchical Expanding and following structure:
    1
      1.1
        1.1.1
      1.2
        1.2.1
    2
    Entry 1.2 has condition set to never. And the problem is, as you can see, that entry 2 seems to be under entry 1.1. But really it isn't. Reason of this strange look is that in some cases, when condition for last entry in sublist is evaluted as false, there isn't generated tag </ul> closing that sublist, in this case are not closed even two sublists - under entries 1 and 1.1.
    In my real application it is more complicated, I have static list with about 80 entries (report menu) and every user sees some reports based on his position in organization structure and other conditions. And as you can imagine, this bug produces really confusing results, almost unique for every user.
    Did anybody meet this problem too? We are on ApEx 4.1.0, it is present in 4.1.1 too (as seen on apex.oracle.com)... And I think it wasn't problem in 4.0 (at least nobody noticed for few months and I believe somebody would notice that reports for one department are under reports for another one). Used theme is standard theme 2 - Builder Blue.
    Jirka

    update:
    I tried deriving the full path for the image file by viewing the source when I embedded it in an HTML region on the same page and it gives me something similar to the following URL:
    wwv_flow_file_mgr.get_file?p_security_group_id=502133210878128108&p_fname=myImage.gif
    (p.s. it is a .gif file - not sure if this should make any material difference)
    As a result, I tried embedding this into the code:
    <fo:block>
    <fo:external-graphic src="wwv_flow_file_mgr.get_file?p_security_group_id=502133210878128108&p_fname=myImage.gif)"/>
    </fo:block>
    but this time, instead of merely not rendering, when Acrobat opens, an error message appeared reported that the file was corrupted or invalid. When trying different formats, I seem to get a generic: "500 Internal Server Error".
    I'm going to try putting the image file in the server directory tree to see if that will work. I'll post later either way.

  • Linking Templates with instances=static

    Did anybody try to use the CC instances=static flag?
    When trying to link I get an error message:
    CC -c -g -KPIC -mt -instances=static TemplateTest.cpp
    CC -G -o libtmplt.so -L/opt/SUNWspro/SC5.0/lib -instances=static -L. -mt TemplateTest.o -lCstd
    CC -c -g -KPIC -mt -instances=static main.cpp
    CC -L/opt/SUNWspro/SC5.0/lib -instances=static -L. -mt -o TmplTst main.o -ltmplt -lCstd
    Undefined first referenced
    symbol in file
    void std::vector<int,std::allocator<int> >::__insert_aux(int*,const int&) ./libtmplt.so
    ld: fatal: Symbol referencing errors. No output written to TmplTst

    Hi guys,
    I got to solve this error some time ago. I have discussed it in thread:
    http://forum.java.sun.com/thread.jspa?forumID=850&threadID=5069680
    I'm not sure if it has something to do with instances=static option.
    Maybe you can try if it works in your environment.
    operator= is not needed in this procedure, so the associated error may be avoided.
    Good luck.
    Bye.

  • Compilation problem with templates while using option -m64

    Hi,
    I have compilation problem with template while using option -m64.
    No problem while using option -m32.
    @ uname -a
    SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
    $ CC -V
    CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
    Here is some C++ program
    ############# foo5.cpp #############
    template <typename T, T N, unsigned long S = sizeof(T) * 8>
    struct static_number_of_ones
    static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
    static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
    template <typename T, T N>
    struct static_number_of_ones<T, N, 0>
    static const T m_value = N;
    static const unsigned long m_count = 0;
    template <typename T, T N>
    struct static_is_power_of_2
    static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
    template <unsigned long N>
    struct static_number_is_power_of_2
    static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
    int main(int argc)
    int ret = 0;
    if (argc > 1)
    ret += static_is_power_of_2<unsigned short, 16>::m_result;
    ret += static_is_power_of_2<unsigned int, 16>::m_result;
    ret += static_is_power_of_2<unsigned long, 16>::m_result;
    ret += static_number_is_power_of_2<16>::m_result;
    else
    ret += static_is_power_of_2<unsigned short, 17>::m_result;
    ret += static_is_power_of_2<unsigned int, 17>::m_result;
    ret += static_is_power_of_2<unsigned long, 17>::m_result;
    ret += static_number_is_power_of_2<17>::m_result;
    return ret;
    Compiation:
    @ CC -m32 foo5.cpp
    // No problem
    @ CC -m64 foo5.cpp
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
    "foo5.cpp", line 36: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
    "foo5.cpp", line 37: Where: Specialized in non-template code.
    "foo5.cpp", line 20: Error: An integer constant expression is required here.
    "foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
    "foo5.cpp", line 43: Where: Specialized in non-template code.
    "foo5.cpp", line 26: Error: An integer constant expression is required here.
    "foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
    "foo5.cpp", line 44: Where: Specialized in non-template code.
    4 Error(s) detected.
    Predefined macro:
    @ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
    @ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
    @ diff log32 log64
    7c7
    < #define __TIME__ "09:24:58"
    #define __TIME__ "09:25:38"20c20
    < #define __sparcv8plus 1
    #define __sparcv9 1[snipped]
    =========================
    What is wrong?
    Thanks,
    Alex Vinokur

    Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
    If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
    Otherwise, you can check for new patches from time to time at
    [http://developers.sun.com/sunstudio/downloads/patches/]
    and see whether this bug is listed as fixed.

  • Very strange bug with compareTo: returning incorrect results

    Hello everyone! I have used the method compareTo many times to maintain my database project's entries. However recently I have discovered a bug, in which:
    a and b both being Storage type objects:
    private static class Storage {
    object data
    int nextData //an array stores the Storage objects
    int previousData //this uses an integer to locate previous in array
    Problem:
    ((Comparable)(a.data)).compareTo((Comparable)(b.data)) returns a 3, when a.data is clearly 5, and b.data is clearly 20.
    This is very strange, as the compareTo should return a -1 instead of a positive number. Is this a known bug with the compareTo method? I have been using it reliably for many programs but this is the first time it ever occurs to me.

    Problem:
    ((Comparable)(a.data)).compareTo((Comparable)(b.data))
    returns a 3, when a.data is clearly 5, and b.data is
    clearly 20.
    This is very strange, as the compareTo should return a
    -1 instead of a positive number. Is this a known bug
    with the compareTo method? I have been using it
    reliably for many programs but this is the first time
    it ever occurs to me.Not really... comparing Strings "5" to "20"
    is really the same as comparing "5" to "2"
    being the first character of the string, difference
    being, surprise, surprise = 3.
    If you want the Strings to be comparable that way you should left-fill them with spaces or zeros.
    Or, better still, override compareTo and make your Storage implement Comparable instead of all that casting of the data objects.

  • [svn] 1941: Fix bug with writing out a MorphShape2 line style when it has a fill

    Revision: 1941
    Author: [email protected]
    Date: 2008-06-04 12:13:17 -0700 (Wed, 04 Jun 2008)
    Log Message:
    Fix bug with writing out a MorphShape2 line style when it has a fill
    connected to it. Had been calling encodeMorphFillstyles() directly
    with an array of one element, but that adds a count byte (of value 1)
    which should not be there. So I decomposed new method
    encodeMorphFillstyle() out of encodeMorphFillstyles(). So not a big
    change, but lots of indentation changes.
    Other than that all changes were replacing the use of constant numbers
    with static constants from FillStyle and also adding an equals()
    implementation for FocalGradient.
    reviewed by Pete Farland, passed flex checkin tests
    Modified Paths:
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
    flex/sdk/trunk/modules/swfutils/src/java/flash/swf/types/FocalGradient.java

    Hello,
    We also have this problem ...
    We are concluded, (??) When there is a note on the first or second line that starts in the block, justification and rebuilt and the problem happens! even made to change color of text on the blank page occurs ... our solution to an extra line at the beginning of the block without note or make it past the note on the previous page ...
    when in a true solution?
    Translation from French
    Bonjour,
    Nous avons aussi ce problème …
    Nous somme arrivé à la conclusion, (???) quand il y a une note sur la première ou la deuxième ligne qui commence dans le bloc, justification et refaite et le problème arrive !!! même le faite de changé de couleur sur du texte les page blanche survient … notre solution mettre une ligne supplémentaire en début du bloc sans note ou faire passé le note sur la page précédente …
    à quand une vrai solution?
    Philippe

  • 30EA3: German language bug with user defined reports still not fixed

    In 30EA2: Limited folder functionality with German language
    I wrote about a bug in 30EA2. Was this message noticed by the developers?
    The bug still exists in 30EA3.
    In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
    A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf

    I made a new thread for the same bug in 3.1EA2:
    3.1EA2 Old bug with German language settings still exists
    I have some hope, that my problem finally got noticed by the developers.

  • 3.1EA2 Old bug with German language settings still exists

    In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
    In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
    AddVMOption -Duser.language=en
    in sqldeveloper.conf
    I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
    Edited by: user1775992 on 22.11.2011 03:30

    I have raised a bug on this issue and I am actively looking into it.

  • Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...

    Okay, i have 2 bugs with maverick.  First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it.  Second, I work on a network of computers and the search feature is now buggy...  When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything...  Very buggy. 

    It appears to me that network file access is buggy in Maverick.
    In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
    It makes impossible navigate a directory tree.
    File access has been trashed in Maverick.
    They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

  • Using multiple laptops and AirTunes with one static IP

    I just moved into a place that requires a static IP they provided me. After much tinkering, I finally got the Airport Express to work so that I could get online using my Powerbook. However, whenever I'm on the internet (Airport set NOT to distribute IP addresses), I can't use AirTunes. The moment I change that (whether it's using Airport Admin Utility or changing Network Settings on the Powerbook) and I am able to get online again, AirTunes quits and iTunes can't seem to find the remote speakers again.
    I can't even use these both at the same time, and I would eventually like to use AirTunes at the same time as the internet AND be able to connect wirelessly to the internet using my PC laptop. Before moving into the apartment with the static IP, this was possible.
    I keep reading about port mapping - perhaps that is the answer? Problem is, I have no idea what that is. Can somebody please explain why this is happening and offer a solution?

    a) WEP WPA password, ive never set one up for the airport, where do i find out what this password is for my PC?
    You will set up wireless security (WEP or WPA) on the AirPort Express Base Station (AX)..using the AirPort Admin Utility, which is part of AirPort for Windows.
    b) Everytime I run the Airport Express Assistant it gives me an error message saying "Windows is not the current network manager...please change Windows to the default", I dont know why I get this error and I assume windows is the one managing the networks I use.
    Your PC has wireless capability...correct? The AirPort Setup Assistant requires a wireless connection to the AX.
    c) I can connect to the airport through windows, but when in the Airport Management Utility it does not detect the Airport
    Connect your PC directly, using an Ethernet cable, to the Ethernet port of the AX, and then run the AirPort Admin Utility to configure it.
    d) After all this, will Windows and iTunes allow you to stream music thru the Airport Express, like it does on my mac with itunes???
    Yes, you will be able to stream iTunes from your PC to the AX, either wired or wirelessly.

  • I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

    Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
    So, the options are to upgrade to a newer OS X or use Firefox or  Chrome.
    Be aware, Apple no longer support Snow Leopard v10.6 >  www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
    See if your Mac can run v10.9 Mavericks >  OS X Mavericks: System Requirements
    If so, you can download and install Mavericks for free from the App Store.
    Read prior to upgrading >   Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

  • ICal bug with month view

    I primarily use week view on iCal, but sometimes i switch to month view for a larger perspective. Often, i use month view to check for any leftover events from the previous month in case i forgot to delete one or two.
    I just found a bug concerning this. If i click on "month" today, it'll take me to the month view for june 2011, and from there i can navigate forwards or backwards. However, may 2011 seems to have a bug. If i click on < from june, it does nothing; if i click again, it takes me to april 2011. Similarly, if i click on > from april it does nothing and if i click again it takes me to june.
    It doesn't end there. The june/may thing happens only when the selected day (the one shaded light grey on the month and week views and bright blue on the little month tab on the left) is after 04 june. If a day from the first week of june (i have my weeks start on sunday) is selected, the < button does take me to may, but several events which i deleted a long time ago are showing up.
    Now, i have an event set for today (04 june). Since the first four days of june are in the same week as the last three of may, the month view for may shows these four days, as any normal calendar app would.
    If i use the month tab to the left to navigate, i can access may 2011 by selecting any day on that month. However, iCal's behaviour depends on which day was selected previously. If the previous day was in april 2011 or earlier, iCal will show the month of may completely empty, which is great because i have no leftover appointments from may; however, the box for 04 june is also empty, which it shouldn't be. If the previous day was in june 2011, it'll show may with a repeating event on every sunday except the first, which is completely absurd, since i have deleted this event (and why isn't it showing on the first sunday in may?); the box for 04 june, however, will correctly show the event i have set for this day. If the previous day was in july 2011 or later, it'll show may with the repeating event on all sundays (including the first one) and it won't show anything on the box for 04 june.
    Obviously, there is a bug with may 2011.
    In case it helps, i do have a repeating event set to all sundays until the end of existence, but i have deleted all the entries from may and previously, since they have obviously already happened. Also, i had many other repeating events set to happen on different weekdays; these are to repeat themselves weekly until about halfway through june, and they started on april or may (can't remember right now). Like the sunday one, i have deleted all the entries from may because they have already taken place. Strangely (and thankfully), none of these appear when i visit may from june or later, as does the sunday event.
    Any help would be greatly appreciated. Or am i forever stuck with week view, which has so far proven to be bug-free?
    (I did a search on Google and another on the Apple forums for this issue but could find nothing, so i decided to ask the question myself. I apologise if somebody has already asked this question and i just couldn't find it.)

    Greetings,
    I have a vague recollection of someone else with this issue but haven't experienced it myself nor encountered it recently.
    Troubleshooting:
    1.) First make an iCal backup: http://support.apple.com/kb/HT2966.
    2.) Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical and / or "ical"
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps!

  • Is this a bug with BoEdge3.1?

    Can anyone help me on the issue which my customer is facing for BoEdge3.1
    Concerning  Error Message: You do not have enough Named User Licenses to make this user a named user. You have 55 Named User Licenses. (FWB 00013)
    This is the error message she was receiving when trying to change an
    existing user from Concurrent to Named under the Connection Type on the
    Properties panel.
    The current workaround was to delete the existing Concurrent user, then re-add the same user as Named.
    She have been going through this process of deleting existing users, and then
    re-adding them as Named and it was working okay. Then, it stopped
    working and she started getting the same FWB 00013 error message again.
    She was not able to create any Named users now. Basically, the workaround
    worked for a while - then stopped working.
    She currently has a total of 88 users. 21 of them are named. 67 of them
    are Concurrent. She is licensed for 55 Named.
    Once again, the system thinks she has 55 users marked as Named. But
    there are only 21 marked as Named.
    She did notice that as she was going through all of her existing list of
    users, in alphabetical order, she was opening the Properties tab and
    checking the Named/Concurrent status - as she got to the 55th user in the
    list that is when she started getting the error message again.
    Is this a bug with BoEdge3.1?
    And I got an ADAPT01194692.
    I am not sure that Is the ADAPT related to this issue.
    Please help me its very critical.

    Hi Salena,
    If you are an SAP Employee, request you to post this question at
    https://cw.sdn.sap.com/community/bobjtc
    Cheers,
    Subhodeep

Maybe you are looking for