SSCC number with HU management

Hi Gurus,
One of our client haven't activate the HU management, and it is using SU management for his finish good. We want to generate the GS1 compliance label with SSCC number.
Is there a way here generate the SSCC number without HU management?
Cheers,

Hello Richard,
It seems that you need big custom development as there is no std provision to generate SSCC number in SAP without handling unit management. My suggestion is as below.
(1) First of all you should understand the logic of SSCC generation.
(2) After creation of TO, capture your SU number in custom table with all details of plant, sloc, WH, TO number and item number, SU number etc. You can use user exit of TO creation to update your custom table.
(3) Write a program to create new SSCC SU number by referring current SU corresponding to plant,SLOC,WH,TO number and item as per your logic and update it in another column of your custom table. This number would be your SSCC number which would corresponds to original SU. Once SSCC is created it should be printed in barcoded form. You can write program accordingly.
(4) You can create background job and run in 5-10 min interval time to update new SU as SSCC in custom table.
My purpose is to use above logic so that all std things would remin undisturbed. I might have missed out some steps which you will catch at the time of actual enhancement.
All the Best!!
Milind Chaudhari

Similar Messages

Tuning the good number of thread with Work Manager?

Hi,
I search some best practice or experience return on the max thread number on a weblogic managed server
I try to explain: with WLS 8.1 and execute queue it was hard to tune the good number of thread but possible (with some processor and for an application we find that after 30 concurrent thread, there's lower performance because of switch on processeur, for others it was 45 for example)
Now i can see sometimes more than 500 thread on one JVM and it seem to be very much for me!!
we face some problem of response time in PRODUCTION, i can see sometimes more than 100 Stuck thread on a resource, so i think it's the reason of bad response time. But with Work Manager, it increase the number of thread to accept others request and the CPU stay at acceptable level (less than 50%) because the stuckthread are do nothing (waiting for resource)
So i don't understand the good tuning to apply since WorkManager...ok it isn't normal to have a lot of stuck thread but if there's no matter about the max number of thread, is it useful to stop and restart managed server?
do you think we can have have bad performance if there's a lot of thread?
thank you for your experience return. If you have no idea just tell me how much thread you can see on your managed server in Production.

up, up...
we have always the same probleme in production: 50 stuck thread on each JVM since 15 days....
the manages serveurs are in warning but don't seem to be disturb cause the work manager add more threads dynamicaly.
Anyone have idea if this situation is a probleme for response time on other request ?
reboot managed solve this situation but i would like to understand the consequence of this situation.
thanks a lot for your experience.

SSCC Number

Is there any relation between HU number and SSCC number?
If it so how to check the SSCC number assigned to a HU?

There is lots of documentation on the web regarding HOW the SSCC works and HOW it is put together in SAP, but essentially a Handling Unit is a Global identifier that can follow an item (or pallet) throughout its lifespan, something not previously available with Storage Units in SAP WM and the HU number is put together in accordance with EAN/UCC SSCC guidelines.
This describes these guidelines in a bit more detail - http://www.fda.gov/ohrms/DOCKETS/dailys/03/Sept03/091503/03n-0361-c000001-03-vol1.pdf
So essentially if you want to track items throughout the supply chain and maintain traceablity of all movements posted against a particular item (receipts/inventory/issues etc) then you need to use Handling Units and the SSCC.
The Configuration for Setting up your SSCC number ranges for Handling Units is under:
> SAP Customizing Implementation Guide
> Logistics - General
> Handling Unit Management
> External Identification
thanks,
A.
Edited by: WILSAQ on Mar 18, 2009 2:44 PM

Cost(vprs) of free goods with batch managment

Dear Gurus,
I have a problem ahout free goods with batch management.
Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
My configurations are shown as below:
Ordered goods (and batch) item category :zta1(copied from tan)
Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
copy control(from delivery to billing):
ztan: accumulation cost :X
If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
So, what can I do?
Thanks and Best Regards,
Lykin Kan

Hi,
These notes are useful:
SAP Note 1365939 - VPRS logic and Customizing settings in SD
SAP Note 547570 - FAQ: VPRS in pricing
If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
I hope this helps you
Regards,
Eduardo
PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

Does anyone know how to win a fight with layout manager?

I am using the form designer in netBeans to design my page, which has a jPanel on the left and a number of controls on the right.
My problem is that when I eventually get it to look half right at design time, it looks different at run time. The fonts are different, the combo boxes are a different height and some of my text boxes are 4 times as wide. http://RPSeaman.googlepages.com/layout.GIF shows both the design-time view and the run-time view. How can I win my fight with layout manager?

I'd like to do an experiment where you take say 20 pairs of students of java, with each pair matched in terms of prior programming and java experience, general knowledge, etc... and set one of each pair to learn Swing using netbeans and its layout generator with the other pair learning to code Swing by hand. Then 6 months later compare their abilities. I'll bet that the code by hand group will blow the other group out of the water in terms of understanding and ability.
Just my 2 Sheckel's worth.

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

I am trying to integrate EBS 12.1.3 with Enterprise Manager 11g

HI Experts
I need to integrate EBS 12.1.3 with Enertprise Manager 11g grid control.
I have applied patch 8333939 to my OMS Instance successfully.
But I am not able to apply the same to my agent home.
I am following this doc.
http://docs.oracle.com/cd/E11857_01/em.111/e18708/T506934T511454.htm
I need to deploy patch 9757683 to my agent home.
Also silent installation is not working.
Please advise.
Thanks
Vsyed786

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

Too Slow - Domino 6.5.4 with access manager agent 2.2 ?

I don't know how to tune Domino 6.5.4 with access manager agent 2.2?
I think AMAgent.properties is not good for SSO.
Please help me to tune it.
# $Id: AMAgent.properties,v 1.103 2005/09/19 22:08:34 madan Exp $
# Copyright ? 2002 Sun Microsystems, Inc. All rights reserved.
# U.S. Government Rights - Commercial software. Government users are
# subject to the Sun Microsystems, Inc. standard license agreement and
# applicable provisions of the FAR and its supplements. Use is subject to
# license terms. Sun, Sun Microsystems, the Sun logo and Sun ONE are
# trademarks or registered trademarks of Sun Microsystems, Inc. in the
# U.S. and other countries.
# Copyright ? 2002 Sun Microsystems, Inc. Tous droits r閟erv閟.
# Droits du gouvernement am閞icain, utlisateurs gouvernmentaux - logiciel
# commercial. Les utilisateurs gouvernmentaux sont soumis au contrat de
# licence standard de Sun Microsystems, Inc., ainsi qu aux dispositions en
# vigueur de la FAR [ (Federal Acquisition Regulations) et des suppl閙ents
# ? celles-ci.
# Distribu? par des licences qui en restreignent l'utilisation. Sun, Sun
# Microsystems, le logo Sun et Sun ONE sont des marques de fabrique ou des
# marques d閜os閑s de Sun Microsystems, Inc. aux Etats-Unis et dans
# d'autres pays.
# The syntax of this file is that of a standard Java properties file,
# see the documentation for the java.util.Properties.load method for a
# complete description. (CAVEAT: The SDK in the parser does not currently
# support any backslash escapes except for wrapping long lines.)
# All property names in this file are case-sensitive.
# NOTE: The value of a property that is specified multiple times is not
# defined.
# WARNING: The contents of this file are classified as an UNSTABLE
# interface by Sun Microsystems, Inc. As such, they are subject to
# significant, incompatible changes in any future release of the
# software.
# The name of the cookie passed between the Access Manager
# and the SDK.
# WARNING: Changing this property without making the corresponding change
# to the Access Manager will disable the SDK.
com.sun.am.cookie.name = iPlanetDirectoryPro
# The URL for the Access Manager Naming service.
com.sun.am.naming.url = http://sportal.yjy.dqyt.petrochina:80/amserver/namingservice
# The URL of the login page on the Access Manager.
com.sun.am.policy.am.login.url = http://sportal.yjy.dqyt.petrochina:80/amserver/UI/Login
# Name of the file to use for logging messages.
com.sun.am.policy.agents.config.local.log.file = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAgent
# This property is used for Log Rotation. The value of the property specifies
# whether the agent deployed on the server supports the feature of not. If set
# to false all log messages are written to the same file.
com.sun.am.policy.agents.config.local.log.rotate = true
# Name of the Access Manager log file to use for logging messages to
# Access Manager.
# Just the name of the file is needed. The directory of the file
# is determined by settings configured on the Access Manager.
com.sun.am.policy.agents.config.remote.log = amAuthLog.Dominoad.yjy.dqyt.petrochina.80
# Set the logging level for the specified logging categories.
# The format of the values is
#     <ModuleName>[:<Level>][,<ModuleName>[:<Level>]]*
# The currently used module names are: AuthService, NamingService,
# PolicyService, SessionService, PolicyEngine, ServiceEngine,
# Notification, PolicyAgent, RemoteLog and all.
# The all module can be used to set the logging level for all currently
# none logging modules. This will also establish the default level for
# all subsequently created modules.
# The meaning of the 'Level' value is described below:
#     0     Disable logging from specified module*
#     1     Log error messages
#     2     Log warning and error messages
#     3     Log info, warning, and error messages
#     4     Log debug, info, warning, and error messages
#     5     Like level 4, but with even more debugging messages
# 128     log url access to log file on AM server.
# 256     log url access to log file on local machine.
# If level is omitted, then the logging module will be created with
# the default logging level, which is the logging level associated with
# the 'all' module.
# for level of 128 and 256, you must also specify a logAccessType.
# *Even if the level is set to zero, some messages may be produced for
# a module if they are logged with the special level value of 'always'.
com.sun.am.log.level =
# The org, username and password for Agent to login to AM.
com.sun.am.policy.am.username = UrlAccessAgent
com.sun.am.policy.am.password = LYnKyOIgdWt404ivWY6HPQ==
# Name of the directory containing the certificate databases for SSL.
com.sun.am.sslcert.dir = c:/Sun/Access_Manager/Agents/2.2/domino/cert
# Set this property if the certificate databases in the directory specified
# by the previous property have a prefix.
com.sun.am.certdb.prefix =
# Should agent trust all server certificates when Access Manager
# is running SSL?
# Possible values are true or false.
com.sun.am.trust_server_certs = true
# Should the policy SDK use the Access Manager notification
# mechanism to maintain the consistency of its internal cache? If the value
# is false, then a polling mechanism is used to maintain cache consistency.
# Possible values are true or false.
com.sun.am.notification.enable = true
# URL to which notification messages should be sent if notification is
# enabled, see previous property.
com.sun.am.notification.url = http://Dominoad.yjy.dqyt.petrochina:80/amagent/UpdateAgentCacheServlet?shortcircuit=false
# This property determines whether URL string case sensitivity is
# obeyed during policy evaluation
com.sun.am.policy.am.url_comparison.case_ignore = true
# This property determines the amount of time (in minutes) an entry
# remains valid after it has been added to the cache. The default
# value for this property is 3 minutes.
com.sun.am.policy.am.polling.interval=3
# This property allows the user to configure the User Id parameter passed
# by the session information from the access manager. The value of User
# Id will be used by the agent to set the value of REMOTE_USER server
# variable. By default this parameter is set to "UserToken"
com.sun.am.policy.am.userid.param=UserToken
# Profile attributes fetch mode
# String attribute mode to specify if additional user profile attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user profile attributes will be introduced.
# HTTP_HEADER - additional user profile attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user profile attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
# The user profile attributes to be added to the HTTP header. The
# specification is of the format ldap_attribute_name|http_header_name[,...].
# ldap_attribute_name is the attribute in data store to be fetched and
# http_header_name is the name of the header to which the value needs
# to be assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-
number,c|country
# Session attributes mode
# String attribute mode to specify if additional user session attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user session attributes will be introduced.
# HTTP_HEADER - additional user session attributes will be introduced into HTTP header.
# HTTP_COOKIE - additional user session attributes will be introduced through cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
# The session attributes to be added to the HTTP header. The specification is
# of the format session_attribute_name|http_header_name[,...].
# session_attribute_name is the attribute in session to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.session.attribute.map=
# Response Attribute Fetch Mode
# String attribute mode to specify if additional user response attributes should
# be introduced into the request. Possible values are:
# NONE - no additional user response attributes will be introduced.
# HTTP_HEADER - additional user response attributes will be introduced into
# HTTP header.
# HTTP_COOKIE - additional user response attributes will be introduced through
# cookies.
# If not within these values, it will be considered as NONE.
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
# The response attributes to be added to the HTTP header. The specification is
# of the format response_attribute_name|http_header_name[,...].
# response_attribute_name is the attribute in policy response to be fetched and
# http_header_name is the name of the header to which the value needs to be
# assigned.
# NOTE: In most cases, in a destination application where a "http_header_name"
# shows up as a request header, it will be prefixed by HTTP_, and all
# lower case letters will become upper case, and any - will become _;
# For example, "common-name" would become "HTTP_COMMON_NAME"
com.sun.am.policy.agents.config.response.attribute.map=
# The cookie name used in iAS for sticky load balancing
com.sun.am.policy.am.lb.cookie.name = GX_jst
# indicate where a load balancer is used for Access Manager
# services.
# true | false
com.sun.am.load_balancer.enable = false
####Agent Configuration####
# this is for product versioning, please do not modify it
com.sun.am.policy.agents.config.version=2.2
# Set the url access logging level. the choices are
# LOG_NONE - do not log user access to url
# LOG_DENY - log url access that was denied.
# LOG_ALLOW - log url access that was allowed.
# LOG_BOTH - log url access that was allowed or denied.
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
# Agent prefix
com.sun.am.policy.agents.config.agenturi.prefix = http://Dominoad.yjy.dqyt.petrochina:80/amagent
# Locale setting.
com.sun.am.policy.agents.config.locale = en_US
# The unique identifier for this agent instance.
com.sun.am.policy.agents.config.instance.name = unused
# Do SSO only
# Boolean attribute to indicate whether the agent will just enforce user
# authentication (SSO) without enforcing policies (authorization)
com.sun.am.policy.agents.config.do_sso_only = true
# The URL of the access denied page. If no value is specified, then
# the agent will return an HTTP status of 403 (Forbidden).
com.sun.am.policy.agents.config.accessdenied.url =
# This property indicates if FQDN checking is enabled or not.
com.sun.am.policy.agents.config.fqdn.check.enable = true
# Default FQDN is the fully qualified hostname that the users should use
# in order to access resources on this web server instance. This is a
# required configuration value without which the Web server may not
# startup correctly.
# The primary purpose of specifying this property is to ensure that if
# the users try to access protected resources on this web server
# instance without specifying the FQDN in the browser URL, the Agent
# can take corrective action and redirect the user to the URL that
# contains the correct FQDN.
# This property is set during the agent installation and need not be
# modified unless absolutely necessary to accommodate deployment
# requirements.
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
# See also: com.sun.am.policy.agents.config.fqdn.check.enable,
# com.sun.am.policy.agents.config.fqdn.map
com.sun.am.policy.agents.config.fqdn.default = Dominoad.yjy.dqyt.petrochina
# The FQDN Map is a simple map that enables the Agent to take corrective
# action in the case where the users may have typed in an incorrect URL
# such as by specifying partial hostname or using an IP address to
# access protected resources. It redirects the browser to the URL
# with fully qualified domain name so that cookies related to the domain
# are received by the agents.
# The format for this property is:
# com.sun.am.policy.agents.config.fqdn.map = [invalid_hostname|valid_hostname][,...]
# This property can also be used so that the agents use the name specified
# in this map instead of the web server's actual name. This can be
# accomplished by doing the following.
# Say you want your server to be addressed as xyz.hostname.com whereas the
# actual name of the server is abc.hostname.com. The browsers only knows
# xyz.hostname.com and you have specified polices using xyz.hostname.com at
# the Access Manager policy console, in this file set the mapping as
# com.sun.am.policy.agents.fqdn.map = valid|xyz.hostname.com
# Another example is if you have multiple virtual servers say rst.hostname.com,
# uvw.hostname.com and xyz.hostname.com pointing to the same actual server
# abc.hostname.com and each of the virtual servers have their own policies
# defined, then the fqdnMap should be defined as follows:
# com.sun.am.policy.agents.fqdn.map = valid1|rst.hostname.com,valid2|uvw.hostname.com,valid3|xyz.hostname.com
# WARNING: Invalid value for this property can result in the Web Server
# becoming unusable or the resources becoming inaccessible.
com.sun.am.policy.agents.config.fqdn.map =
# Cookie Reset
# This property must be set to true, if this agent needs to
# reset cookies in the response before redirecting to
# Access Manager for Authentication.
# By default this is set to false.
# Example : com.sun.am.policy.agents.config.cookie.reset.enable=true
com.sun.am.policy.agents.config.cookie.reset.enable=false
# This property gives the comma separated list of Cookies, that
# need to be included in the Redirect Response to Access Manager.
# This property is used only if the Cookie Reset feature is enabled.
# The Cookie details need to be specified in the following Format
# name[=value][;Domain=value]
# If "Domain" is not specified, then the default agent domain is
# used to set the Cookie.
# Example : com.sun.am.policy.agents.config.cookie.reset.list=LtpaToken,
# token=value;Domain=subdomain.domain.com
com.sun.am.policy.agents.config.cookie.reset.list=
# This property gives the space separated list of domains in
# which cookies have to be set in a CDSSO scenario. This property
# is used only if CDSSO is enabled.
# If this property is left blank then the fully qualified cookie
# domain for the agent server will be used for setting the cookie
# domain. In such case it is a host cookie instead of a domain cookie.
# Example : com.sun.am.policy.agents.config.cookie.domain.list=.sun.com .iplanet.com
com.sun.am.policy.agents.config.cookie.domain.list=
# user id returned if accessing global allow page and not authenticated
com.sun.am.policy.agents.config.anonymous_user=anonymous
# Enable/Disable REMOTE_USER processing for anonymous users
# true | false
com.sun.am.policy.agents.config.anonymous_user.enable=false
# Not enforced list is the list of URLs for which no authentication is
# required. Wildcards can be used to define a pattern of URLs.
# The URLs specified may not contain any query parameters.
# Each service have their own not enforced list. The service name is suffixed
# after "# com.sun.am.policy.agents.notenforcedList." to specify a list
# for a particular service. SPACE is the separator between the URL.
com.sun.am.policy.agents.config.notenforced_list = http://dominoad.yjy.dqyt.petrochina/*.nsf http://dominoad.yjy.dqyt.petrochina/teamroom.nsf/TROutline.gif?
OpenImageResource http://dominoad.yjy.dqyt.petrochina/icons/*.gif
# Boolean attribute to indicate whether the above list is a not enforced list
# or an enforced list; When the value is true, the list means enforced list,
# or in other words, the whole web site is open/accessible without
# authentication except for those URLs in the list.
com.sun.am.policy.agents.config.notenforced_list.invert = false
# Not enforced client IP address list is a list of client IP addresses.
# No authentication and authorization are required for the requests coming
# from these client IP addresses. The IP address must be in the form of
# eg: 192.168.12.2 1.1.1.1
com.sun.am.policy.agents.config.notenforced_client_ip_list =
# Enable POST data preservation; By default it is set to false
com.sun.am.policy.agents.config.postdata.preserve.enable = false
# POST data preservation : POST cache entry lifetime in minutes,
# After the specified interval, the entry will be dropped
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
# Cross-Domain Single Sign On URL
# Is CDSSO enabled.
com.sun.am.policy.agents.config.cdsso.enable=false
# This is the URL the user will be redirected to for authentication
# in a CDSSO Scenario.
com.sun.am.policy.agents.config.cdcservlet.url =
# Enable/Disable client IP address validation. This validate
# will check if the subsequent browser requests come from the
# same ip address that the SSO token is initially issued against
com.sun.am.policy.agents.config.client_ip_validation.enable = false
# Below properties are used to define cookie prefix and cookie max age
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
# Logout URL - application's Logout URL.
# This URL is not enforced by policy.
# if set, agent will intercept this URL and destroy the user's session,
# if any. The application's logout URL will be allowed whether or not
# the session destroy is successful.
com.sun.am.policy.agents.config.logout.url=
#http://sportal.yjy.dqyt.petrochina/amserver/UI/Logout
# Any cookies to be reset upon logout in the same format as cookie_reset_list
com.sun.am.policy.agents.config.logout.cookie.reset.list =
# By default, when a policy decision for a resource is needed,
# agent gets and caches the policy decision of the resource and
# all resource from the root of the resource down, from the Access Manager.
# For example, if the resource is http://host/a/b/c, the the root of the
# resource is http://host/. This is because more resources from the
# same path are likely to be accessed subsequently.
# However this may take a long time the first time if there
# are many many policies defined under the root resource.
# To have agent get and cache the policy decision for the resource only,
# set the following property to false.
com.sun.am.policy.am.fetch_from_root_resource = true
# Whether to get the client's hostname through DNS reverse lookup for use
# in policy evaluation.
# It is true by default, if the property does not exist or if it is
# any value other than false.
com.sun.am.policy.agents.config.get_client_host_name = false
# The following property is to enable native encoding of
# ldap header attributes forwarded by agents. If set to true
# agent will encode the ldap header value in the default
# encoding of OS locale. If set to false ldap header values
# will be encoded in UTF-8
com.sun.am.policy.agents.config.convert_mbyte.enable = false
#When the not enforced list or policy has a wildcard '*' character, agent
#strips the path info from the request URI and uses the resulting request
#URI to check against the not enforced list or policy instead of the entire
#request URI, in order to prevent someone from getting access to any URI by
#simply appending the matching pattern in the policy or not enforced list.
#For example, if the not enforced list has the value http://host/*.gif,
#stripping the path info from the request URI will prevent someone from
#getting access to http://host/index.html by using the URL http://host/index.html?hack.gif.
#However when a web server (for exmample apache) is configured to be a reverse
#proxy server for a J2EE application server, path info is interpreted in a different
#manner since it maps to a resource on the proxy instead of the app server.
#This prevents the not enforced list or policy from being applied to part of
#the URI below the app serverpath if there is a wildcard character. For example,
#if the not enforced list has value http://host/webapp/servcontext/* and the
#request URL is http://host/webapp/servcontext/example.jsp the path info
#is /servcontext/example.jsp and the resulting request URL with path info stripped
#is http://host/webapp, which will not match the not enforced list. By setting the
#following property to true, the path info will not be stripped from the request URL
#even if there is a wild character in the not enforced list or policy.
#Be aware though that if this is set to true there should be nothing following the
#wildcard character '*' in the not enforced list or policy, or the
#security loophole described above may occur.
com.sun.am.policy.agents.config.ignore_path_info = false
# Override the request url given by the web server with
# the protocol, host or port of the agent's uri specified in
# the com.sun.am.policy.agents.agenturiprefix property.
# These may be needed if the agent is sitting behind a ssl off-loader,
# load balancer, or proxy, and either the protocol (HTTP scheme),
# hostname, or port of the machine in front of agent which users go through
# is different from the agent's protocol, host or port.
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
# Override the notification url in the same way as other request urls.
# Set this to true if any one of the override properties above is true,
# and if the notification url is coming through the proxy or load balancer
# in the same way as other request url's.
com.sun.am.policy.agents.config.override_notification.url =
# The following property defines how long to wait in attempting
# to connect to an Access Manager AUTH server.
# The default value is 2 seconds. This value needs to be increased
# when receiving the error "unable to find active Access Manager Auth server"
com.sun.am.policy.agents.config.connection_timeout =
# Time in milliseconds the agent will wait to receive the
# response from Access Manager. After the timeout, the connection
# will be drop.
# A value of 0 means that the agent will wait until receiving the response.
# WARNING: Invalid value for this property can result in
# the resources becoming inaccessible.
com.sun.am.receive_timeout = 0
# The three following properties are for IIS6 agent only.
# The two first properties allow to set a username and password that will be
# used by the authentication filter to pass the Windows challenge when the Basic
# Authentication option is selected in Microsoft IIS 6.0. The authentication
# filter is named amiis6auth.dll and is located in
# Agent_installation_directory/iis6/bin. It must be installed manually on
# the web site ("ISAPI Filters" tab in the properties of the web site).
# It must also be uninstalled manually when unintalling the agent.
# The last property defines the full path for the authentication filter log file.
com.sun.am.policy.agents.config.iis6.basicAuthentication.username =
com.sun.am.policy.agents.config.iis6.basicAuthentication.password =
com.sun.am.policy.agents.config.iis6.basicAuthentication.logFile = c:/Sun/Access_Manager/Agents/2.2/debug/C__Lotus_Domino/amAuthFilter

Hi,
I installed opensso (so Sun Java(TM) System Access Manager 7.5) and the agent for Domino 6.5.4 and I have the message in logs "amAgent"
2007-07-11 18:40:16.119 Error 1708:3dbcf768 PolicyAgent: render_response(): Entered.
I have the box to identify but it doesnot connect me on my opensso server.
It still identify with Domino's server
Thanks for your response
Thomas

Split valuation with batch management and project stock

Dear Gurus,
I need to combine two following requirements:
1. split valuation with batch management (valuation type = batch number)
2. project stock
These two functionalities work fine separately but not together.
I receipt PO for material with spiit valuation on a batch level into a project stock. Posting is OK and material document (MSEG table) seems to be OK (batch number, valuation type and project stock are in this table). The problem appears when I want to display material in this valuation type (MM03) or batch (MSC3n). They don't exist!!! Short investigation showed that during goods receipt table MBEW (valuated stock) was not updated with this valuation type.
But If PO is receipt into normal stock first and then posted into project stock everything is OK.
Have you had or heart about such issue? I would appreciate any sugestion.
Thsnks in advance.
Marcin Bernat

Hi,
As you already know ,u are using project stock and doing goods receipt against project, stock table QBEW will be updated and not MBEW. MBEW only updates in case of plant stock valuation. If u receive any goods against project stock it does not contribute to plant stock. Irrespective whether your material is managed in split valuation or not, If it is received against project stock it only updates QBEW. There is no need to update MBEW, if u r using split valuation in project. QBEW also have valuation type as another level like MBEW. If u want to see material price for project stock, it can be seen in QBEW -valuation type and not in mm03.
As u r receiving goods against project stock this is d only reason QBEW is updated and not MBEW.
QBEW will store all information like MBEW for batch number, valuation type and project stock assignment.
Hope it answers your question.
Deepak.

How to talk with a manager

I have had an ongoing billing issue since December. I have been calling the customer support number explaining the issue over and over again with 30 to 60 minuet conversations and every time the representative has assured me things were taken care of. When I get my bill the issue remains. Recently I had a 2 hour conversation representative named Ryan and he was very helpful and explained that it was 100% Verizon's issue but did not know how to straighten out so sent me an email and said after supervisors discussed he would be I contact. After a week of being told via email supervisors were working on it, I asked what could be so difficult, if they could stop talking about it and just correct it. I also asked to speak with a manager in an email. Ryan indicated he was sending on toa manager named Kolten. A manager named Kolten called 4 days ago and I missed the call but have left at least 2 messages a day at different times hoping to catch him but also asking for a call back and if he missed me a time I could call him. Nothing. I have reached back out to Ryan in three emails and nothing. I am concerned that Verizon would have customer service people and a manager that would just stop communicating. Is there a way to get another level of management that could not only handle the issue but also answer why people that are suppose to be helping just walk away from a customer? Any help with this would be greatly appreciated. Maybe I need to go to the store?
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

Thank you for your willingness to help. You may want to go back and read all the comments on my account. There is a huge history and record of my calls. It started back in December when I upgraded my daughters phone to an I 6. (4683) number on account) and added a phone for my youngest. I was talked into the Edge program at the store on around 12-18-14. It was a Christmas Gift for both. Regardless by 12-31-14 the I 6 stopped working, it would not take a charge or turn on. We took the phone to a store near our home (not the one where I signed up for the Edge program). The people at the store tried to help and were on the phone with a Verizon representative for a while. It was decided that I needed to provide my credit card so they could charge me a deposit and they would send me a new phone and as soon as they received the old (non working phone) they would credit me back the deposit. We received the new phone and sent back the old (Verizon received on 1-17-15). I received my firs bill and fond a $450 charged for the phone and a $35 restock fee and then on my credit card got hit with a $235 charge for the phone. This started my calls to customer service. I was told not to pay the $450 and as it was for the phone and as soon as the warehouse did their paper work I would get the credit. I will save the play by ply but called several more time and was told the same thing including the warehouse was backed up and they were suppose to put some note on the account saying why the bill was not paid. I have always paid all other service charges every month just deducted the $450. So 3 months later and the charge remains. Beginning of march and went through all this with a rep and was told a supervisor was looking into it and charges would be reversed because it has gone on too long and none of this is my fault. Also from my bill we discovered that the (4683 number) was not in the Edge program so I asked why and was told they needed to look into it and a supervisor as it has gone too long. Never happened. I called Sunday 3-15 and went through everything again and was told a same thing and a supervisor would call... Nothing.. I called 3-17 and talked to Ryan and spent 2 hours on the phone. He was very helpful and we found the $450 was not for the phone it was for canceling the Verizon edge program and the $235 on my card was for the remaining cost of the phone. After 2 hours and being told 3 or 4 supervisors were discussing what to do but could not come up with a clear answer he said they would call the next day with resolution. Given I have gone down that road and no calls he gave me his email address so we could communicate. So after about a week of emails he indicated supervisors were still reviewing. Meanwhile I received a letter from Verizon indicating I was not eligible for the Edge program do an outstanding balance (really) and now I have concerns Verizon is knocking my credit even though they have reversed all late fees and indicated none of this was my doing and not to pay the $450 as it suppose to be reversed! I asked Ryan if the Supervisors could stop reviewing and do something about this as it had been another week Ryan and I have been emailing. I also asked if there was a manage I could talk with and was told he sent to Kelton and he would call (this was Sunday night (3-22-15) within 24 hours. 24 hours went buy and another email to Ryan saying no one called. Kelton finally called Tuesday (3-24-15) and I missed the call due to being in a meeting at work. I called back with in an hour and now have called Kelton at least two times a day and just receive voice mail. I have asked to be called back but nothing! I have emailed Ryan at least 3 times asking for an update or why he nor Kelton are responding but as of today 3-28 Nothing! I guess its your turn. Let me know what the next step is as I am extremely frustrated with this entire situation as its awful how your customer service representatives can not resolve an issue and I have spent hours on the phone documenting and emailing.
>> Edited by Verizon Moderator to comply with the Verizon Wireless Terms of Service <<

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

BAPI_GOODSMVT_CREATE, will do the goods receipt ( MB01 )for the subcontracting PO with batch management.

Dear Professionals ,
I Just want to confirm that whether BAPI "BAPI_GOODSMVT_CREATE " will do the goods receipt ( MB01 ) for the subcontracting PO with batch management.
Since I will be passing only 101 mvy type in BAPi, will the system automatically call 543 mvt type with batch management and post the consumption.
can I change the batch of the component items ?

Hi ,
Delivery note is like a ref document number
so you can use the
In the BAPI_GOODSMVT_CREATE There is header structure BAPI2017_GM_HEAD_01 which has a field REF_DOC_NO
you can pass the delivery note value to that field .
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Jul 10, 2008 3:41 PM

MTS with batch management, serialization and Handling unit

Hello All,
I am testing a scenario for MTS with batch management, serialization and Handling unit for discrete manufacturing.
Everything worked fine till I created the Handling unit for the finished product.
The production order has a quantity of 3 EA.
It has three serial numbers 1, 2 and 3. (serial numbers can be displayed from order->Header->serial numbers)
I created one Handling unit for production order quantity of 3 EA.
I tried to do a goods receipt for the production order using transaction COWBHUWE.
I get the following error when I try to post the GR:
Only 0 serial numbers entered instead of 3
Message no. IO304
Diagnosis
There is a serial number obligation, so the number of serial numbers must equal the number of serial numbers in the material document.
You can post the operation only if you entered the correct number of serial numbers previously.
System Response
Depending on the context in which the error arises, the system continues processing, or the required function cannot be performed.
Procedure
You have the following options, for example:
Check that the serial numbers are entered fully.
If necessary, display an error log.
If necessary, contact your system administrator.
What did I miss?
How to fix this problem?
Please help.
Thanks in advance
George

I added the serialization procedure HUSL to the serial number profile and it fixed the problem.

SLED with Batch Management

HI Gurus,
We are using batch management for the material. At the time of goods receipt i am getting error
Shortfall of 100 days against remaining shelf life in current item (365 Day)
I have read some document and found that SLED calculate from the goods receipt document date with batch management. And i found the days difference error as follow.
For SLED of a batch calculates as follows:
SLED = total shelf life + production date from the goods receipt document.
Total shelf life is 365 day according to material master. 21.11.2012 Minas 365 remaing shelf life =13.11.2011
From November 2011 to todayu2019s date 21.02.2012. =100 days.
My question is : If system calculate SLED from the goods receipt (current date) for batch management. Then what is the use of enter manufacturing date in Goods Receipt.
And do i need to change manufacturing date to current date every time. even if material not manufactured in today's date (for example manuf in last month)
Please can any one help me to understand the scenario.
Thanks in Advance.
Ashish Panchal

Assume there is a joghurt.
it is produced on February 1 and has 30 days shelf life in material master, so he shelf life expiration date is March 2nd.
if you have a minimum remaining shelf life entered in your material master e.g. 5 days.
then system actls like this
If you receive this joghurt today (February 21) then you can receive without any error.
but if you want receive this joghurt on February 28, then you get the message "Shortfall of 3 days against remaining shelf life ..."
because your receipt date is withing the minimum remaining shelf life period.
this minimum remaining shelf life shall give you time enough to consume that material. otherwise it is expired before you start using it.
hence a minimum remaining shelf life must be much shorter than the total shelf life. an equal number makes it almost impossible to receive any good.

Batch Number with Box number

Hello SAP Experts,
My Client has a unique requirement, they want system to track Batch number with Box number.
For Example if Batch number for incomming material is 123456, and if the entire quantity comes in 3 boxes, then the system should track the quantity as 123456/1 , 123456/2 and 123456/3.
Moreover, client wants to issue the materials box wise.
Is there any standard way of capturing this requirement.
Reply is awaited.
Regards
Prabhjot Singh

Hello,
Is there any way, by which I can assign Internal number ranges to the Batches in this scenario.
I have also tried to explore Handling unit management but in that case also we need to pack the material inside, but in my client's scenario they get the box from vendor and store it as it is.
Looking for positive solution.
Regards
Prabhjot Singh

SSCC number with HU management

Similar Messages

Maybe you are looking for