SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Similar Messages

File system task - Move file issue, skip the current log file thats open by another process - IIS logs

Hi,
I have created a package to move IIS log files from their source directory to another directory called processing. However, when the package tries to move the current log file it errors because the file is in use by another process (by IIS as its still writing
to it). I would like the package to just ignore the "in-use" file and process the rest and show the package completing successfully. The file in use will be rolled by IIS at midnight and the file will be picked up by the next package run.
However, when the file is rolled and becomes free a new log file is created which will be marked as "in-use"...... which should be ignored at the next run.
Is there some way that I can tell the file system task to ignore in use files or add an event handler to do the same sort of thing?
Any assistance is appreciated

Hi Arthur,
Thank you for your reply.
I have resolved the issue with the following example:
http://www.timmitchell.net/post/2010/08/23/ssis-conditional-file-processing-in-a-foreach-loop/
What I realised was that I needed to just ignore the current log file which gets created daily, so using the above example (and changing the last written date to created date) I am able to ignore/skip the log thats in use.
Adam

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

CSD Load Data Full completing with Could not find server for data domain Error

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

GP Preference Items Throwing "Could not find a part of the path" Error in GP Management Console

Hello,
For background, I recovered two Server 2008 R2 Domain Controllers in the same domain from a JRNL_WRAP_ERROR
using the BurFlags registry key as outlined in KB290762. The non-authoritative restore seemed to resolve NtFrs/replication challenges, as now the FRS and System logs are free from any major errors and "repadmin /showreps" output looks clean.
As part of the cleanup process I am going through and checking all the policy objects. Policy objects that leverage group policy preferences are
throwing an error when the settings are viewed in the management console:
The following errors were encountered:
An unknown error occurred while data was gathered for this extension. Details: Could not find a part of the path 'C:\Users\administrator.YOURDOMAIN\AppData\Local\Temp\2\ny0ho1ht.tmp'.
This occurs for existing Group Policy Preference objects and those that are newly created. It is important note if I go to edit the policy in question
the preference settings are available, it is viewing them in the management console that seems to be the issue. What concerns me here is that the file it is looking for is stored in the local temp directory and not the SYSVOL directory. With replication issues
behind me I am not sure how to address this last piece of the puzzle.
Any assistance in getting this squared away you be appreciated.
Thanks!
Jordan

DCDIAG /C outputs the following error in relation to the VerifyEnterpriseRefrences test:
Starting test: VerifyEnterpriseReferences
The following problems were found while verifying various important DN
references. Note, that these problems can be reported because of
latency in replication. So follow up to resolve the following
problems, only if the same problem is reported on all DCs for a given
domain or if the problem persists after replication has had
reasonable time to replicate changes.
[1] Problem: Missing Expected Value
Base Object:
CN=DC04,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[2] Problem: Missing Expected Value
Base Object:
CN=DC03,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
LDAP Error 0x20 (32) - No Such Object.
I am evaluating the suggested KB now but am not sure it is related to the issue at hand but posted it for completeness.
All other tests pass.

Adobe premiere could not find any valid editing modes error

Hi, I am installing adobe premiere 8 and the update patch and when I click New Project I get the error message Adobe premiere could not find any valid editing modes, please reinstall and start again. I have reinstalled, installed patch, checked for the vidc.draw in registry and none of these have resolved.
Have XP service pack 3, with valid HD space etc... Any suggestions greatly appreciated.

Hello, Kelzb,
Premiere Elements has its own forum, which is here:
http://forums.adobe.com/community/premiere/premiere_elements
and you'll probably get better, faster replies to video questions there. Good luck!

TS3212 I keep getting this error message "The folder path 'Program Files' contains an invalid character.' when upgrading itunes to Itunes 10. I could not uninstall because of the same error message. What needs to done?

Can not download and install Itunes 10 - Get this message "The folder path 'Program Files' contain an invalid character. I tried to uninstall my old Itune through Control Panel but get the same message. What do I need to do?

Perhaps try the following user tip with that one:
"not a valid short file name" and "invalid character" install errors

VS 2010 This file could not be uploaded. The following error occured: External component has thrown an exception.

I just started getting this error message from my VS 2010 VB code, earlier this code ran without the error message. I suspect corruption since this error does not occur on another computer of mine. I tried repairing the installation of VS
2010 without results. Then I uninstalled VS 2010 and reinstalled it, but the error continues. The error message is not very definitive so I do not know how to proceed. I could provide the code, but it is rather lengthy and I don't get this error
with the VS 2010 installed on my laptop. So, I don't think my code is the issue. I would be very grateful for any suggestions you may care to offer for isolating and correcting this problem. Thank you. .......................Phil Hoop
Phil Hoop

Hi Phil,
What’s the template type of the project? Is it a BI project? Based on my research, the issue may be related to the following factors:
.NET Framework version of the project. If it targets .NET Framework 4.0 or higher, modify it to target .NET Framework 3.5 instead.
Debug or Release Configurations. If the project is set to Release Configurations, try to set it to Debug. For more information, please see:
http://msdn.microsoft.com/en-us/library/wx0123s5(v=vs.100).aspx
I noticed that you have asked another question in the asp .net forum, if the issue is not SQL Server BI project related, I suggest that you continue troubleshooting within the
thread in the asp .net forum.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Crashes randomly (Could not find answer on the internet)

I have basically 3 computers with the same hardware except for the power supply. 3 are running same programs, same way installed etc. 2 are running fine but one of the computer has firefox crashing randomly overtime.
Crash: https://crash-stats.mozilla.com/report/index/e611711a-8455-4f2b-9bf7-0769f2130916

Hello,
If you have already done some research on the internet I assume you have seen and tried some of the fixes here:
[[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]
Could you try starting Firefox in Safe Mode and testing whether you get the same crash. Use the instructions below:
[[Troubleshoot Firefox issues using Safe Mode]]
If you do not get the same issue in safe mode then follow the instructions to troubleshoot and identify the add-on or setting that is causing the problem.
If you still get the same issue in Safe Mode then I suggest trying a Firefox Reset. This will return Firefox to its default settings and solves most issues. Your personal information (history, bookmarks etc) will be saved but you will need to reinstall your add-ons.
[[Reset Firefox – easily fix most problems]]
I hope that helps. Let me know if not.

HT201272 I had to download and pay for the upgraded version of Song Pop TWICE !! I don't like having to do that... I could not find anywhere on the phone where it gives you the option to restore previous purchase...

I would like to get a credit to my account for the 1.99 I have had to spend twice to purchase the Song Pop version that is upgraded. I am sure you can check my account and see that I have purchased it twice.

We are all itunes users just like you. no one here can check your account.
Here is how you redownload past purchases:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Could not find file in Temp directory

Hey all!
I received the follwoing error when exporting a report into a pdf file using the ExportToStream method:
Could not find file "C:\DOCUME1\CHL0337\ASPNET\LOCALS1\Temp\export_e269c3d0-e775-4351-b2ea-09507859a79a.tmp".
I am using VS 2003 and CR 9.1.5, and I didn't have any problems with this report until I enlarged the header field for a column. After this error occurred, I reverted back to the original report, but it still threw the error. I then restarted IIS, rebuilt the application, and then ran the report again. Still no luck.
Any ideas on what is causing this problem? Is this a version issue?
(I have four other reports that are still working fine, it just seems to be this one report)

Here is the full dump of the error message:
Exception=System.IO.FileNotFoundException
Message=Could not find file "C:\DOCUME1\CHL0337\ASPNET\LOCALS1\Temp\export_d03e5522-a635-47c0-b649-a238063b0223.tmp".
FileName=C:\DOCUME1\CHL0337\ASPNET\LOCALS1\Temp\export_d03e5522-a635-47c0-b649-a238063b0223.tmp
TargetSite=Void WinIOError(Int32, System.String)
StackTrace= at System.IO.__Error.WinIOError(Int32 errorCode, String str)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
at FixedAssets.FAPageBase.InvokeCrystalReport(String ReportName) in c:\dev\source\comptrollers\fixedassets\dev\web\fapagebase.aspx.cs:line 588
at FixedAssets.Reports.CreateAssetDisposalsReport.btnRunReport_Click(Object sender, EventArgs e) in C:\dev\source\comptrollers\FixedAssets\Dev\web\Reports\AssetDisposalsReport.aspx.cs:line 70
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain()
Source=mscorlib

Could not find linked file if server name of those linked files have changed.

Dear Bros,
Our server path is \\server01 (Mapped P drive), recently all file of AI and linked file was moved to new server location \\server02 without changing drive letter because of critical needs.
However, we've encountered a error as below when opening the AI file after moving all file to new location.
"Could not find the linked file"a10N.jpg". Choose replace to select another file or Ignore to leave the link unchanged."
I believed that it is required to replace and point the file to correct location that should be solved for the time being.
Unfortunately, i estimated that there are over thousands of linked files I need do aforesaid action to solve, it is very difficult to do it one by one...
Is there any tools or method i can be rapidly to replace or point all linked file to correct location?
Appreciated if anyone can help me? Thanks
Kelvin

AI stores the UNC paths that resolve the full network location, not mapped drives, when absolute paths are used. Only paths relative to the document location in the same folder or lower do not use that info. You would have to batch process your files to fix your paths, but perhaps it would be sufficient to create a virtual network location that mimics your old server and point it to the same path on the server....
Mylenium

Could not find any data to display - how to modify system message

Hi,
We created an exception report in the Web Application Designer.
If there are no exceptions (so there is no data to display) the following standard system message is shown:
Could not find any data to display. This might be due to the current selection of variable or filter values
We would however like to modify/remove this message.
How can this be done?
Thanks
Dave

Hi,
Please check the link:
/people/marc.bernard/blog/2008/10/10/how-to-filter-messages-created-by-bi-ip-planning-functions-and-sequences
Please check the Q&A section of above weblog which mentions about
function module RRMS_MESSAGE_HANDLING which could be helpful.
Please also refer to SDN thread:
Re: WAD - messages - message type
Regards,
Amit

Could not find the Database Engine startup handle.

Why can't Microsoft make software that "Just Works" any more.
This is Sooooo frustrating! I'm a developer. I want to write database software and I'd like to use SQL Server. But I can't even get the damn thing to install on a fresh Windows 8.1 installation.
MySQL - installs no problem - it just works.
Oracle - Installs no problem - It just works.
I downloaded SQL Server 2012 Express with SP1, ran the Install, took most of the defaults, and I get:
Install Failed:
The following error has occurred:
Could not find the Database Engine startup handle.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254025
Of course, clicking on the link takes me to a non existing web page - what else? Just incompetence everywhere. This is Microsoft's own operating system yet they can't even get their own database to install while their competitors can.
How can they let this happen!
Then I googled the above error message. - Hundreds of hits and a lot of them are threads in forums and lots of civilians saying "try this try that" none of which works. Not a single Microsoft Employee to be found in any of the
discussions or answers. And this same problem has been happening since 2008! Yet Microsoft can't be bothered to fix it.
This kind of buggy software shouldn't have made it past Alpha testing.
Come on Microsoft, you just have to try harder. I can understand bugs that happen in unusual circumstances, after all I'm a developer too. But this won't even install on a clean Windows 8. It's tantamount to releasing a "Hello
World" program that crashes on startup!

Hi Bob,
If you make sure all your hardware and software requirements are met for installation of SQL Server 2012 on window 8.1 Its highly unlikely you will face issue.I can understand your situation so let me help you.As Kalman pointed can you paste output
of setup log file which was generated due to failed installation using Kalman's link.
Did you went thorugh below link
How to install SQL server on Win 8.1
Hardware and software requirements for SQL Server 2012
Please first read above links understand how it works and then proceed
Regarding startup handle error .AFAIK its because of Account with which you are trying to install SQL server somehow is not able to start it up after installation.Basically a righst issue.Can be different in some cases.Now whenever you install SQL server
alsway RK on Setup file and select run as administrator.When you reach page window where you need to select startup account for SQL Server please select NT Authority\System( or local system account) .
Details with steps
http://social.technet.microsoft.com/wiki/contents/articles/24364.sql-server-troubleshooting-could-not-find-database-engine-startup-handle-error-during-installation.aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Why IE5 could not find applet class but Netscape can ?

Hi,
I have an applet which is running fine on Netscripts6,
But not on IE5.
<APPLET codebase="http://10.1.1.1/demo/" code="ClientApplet.class" HEIGHT=300 WIDTH=300>
<PARAM NAME="relay" VALUE="1">
I have all class files under demo directory(the same directory as html file).
IE5.0 still could not find applet class but Netscript can.

are you sure its failing to load your classes or is it failing to load a class you are using?
Remember IE only uses things from 1.1 so simple things like component.getHeight() does not work you have to use size().height
Its woth enabling the java console and viewing the exact problem.

SSIS File System Task Move File Could not find part of the path error

Similar Messages

Maybe you are looking for