VS 2010 This file could not be uploaded. The following error occured: External component has thrown an exception.

I just started getting this error message from my VS 2010 VB code, earlier this code ran without the error message.  I suspect corruption since this error does not occur on another computer of mine.  I tried repairing the installation of VS
2010 without results.  Then I uninstalled VS 2010 and reinstalled it, but the error continues. The error message is not very definitive so I do not know how to proceed. I could provide the code, but it is rather lengthy and I don't get this error
with the VS 2010 installed on my laptop.  So, I don't think my code is the issue.  I would be very grateful for any suggestions you may care to offer for isolating and correcting this problem.  Thank you.  .......................Phil Hoop
Phil Hoop

Hi Phil,
What’s the template type of the project? Is it a BI project? Based on my research, the issue may be related to the following factors:
.NET Framework version of the project. If it targets .NET Framework 4.0 or higher, modify it to target .NET Framework 3.5 instead.
Debug or Release Configurations. If the project is set to Release Configurations, try to set it to Debug. For more information, please see:
http://msdn.microsoft.com/en-us/library/wx0123s5(v=vs.100).aspx 
I noticed that you have asked another question in the asp .net forum, if the issue is not SQL Server BI project related, I suggest that you continue troubleshooting within the
thread in the asp .net forum.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Similar Messages

  • I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

    I can´t set the control panel iCloud. PC writes this: you can not connect because the server error occurred. What´s matters?

    Whenever I log into icloud.com
    Using what version of which browser?
    iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
    If you have, have you tried clearing your browser cache and cookies?
    For the first tine since 1989 I'm thinking about buying a PC.
    You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
    Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
    Since all this crap started, Mail won't download my Mac.com or me.com email.
    The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

  • The Itunes Library File Could Not Be Saved A unknown Error Occurred -1450

    I keep getting this error message since I updated to this version of Itunes. Ver. 7.0.2.16. I had absolutly no problems until this update. I have removed and reinstalled twice..and I mean removed all files ccleanered the whole PC the whole she-bang, re-ripped my music, new ITL library,XML every thing, over five thousand songs.
    I noticed while importing songs I would get this 1450 error if I tryed doing to many songs at once, looked like a resources issue even though the memory and processer usage was showing plenty of headroom..?? But now its popping up while just trying to play songs in ITUNES. It says its unable to save the file etc. and causes stutterring in the song but amazingly song counts etc. show up in the times played and date played columns. The ITL file also shows as having last been changed/modified at the same time the error message says it couldn't be saved...anyone know what's going on here???
    Tried running with no virus checker running, no firewall etc. Ran a tweakIU routine ...a fix suggestion that I found on a google search, reset the file permissions etc.
    I also get the insufficent privilages message error when trying to set ITUNES as default audio player....(I have ADMIN priv.)
    I'm apparantly not the only person experiencing this, a Google search gets a lot of hits on this 1450 error message.
    HELP PLEASE
    ASUS CUSTOM   Windows XP Pro  

    Well I believe I may have found the solution to the -1450 error at least for my situation.
    While pouring over settings I noticed ITUNES runs in a protected memory space. Well this along with the symptoms displayed (being unable to update the library file if a large number or files are changed/edited added etc.) led me to examine my virtual memory settings under the Windows/control panel/performance/advanced/Memory usage tab and I noticed that for some reason memory usage was selected as optimized for "System cache" VS "programs". I changed this to programs and also while in the same area disabled the EP "execution prevention" feature of the INTEL processor.
    I can now import change/files listen to music etc. without this -1450 error presenting itself.
    I'm not sure which of the two steps solved the problem but I suspect the Memory optimization being set for "system cache" was the problem.
    While I never had any problems running other apps.(I do have a lot of memory)I think ITUNES was having a problem with this setting when writing to and from temp files and the ITUNES.ITL file.
    I have no idea how or when or why this setting was as it was as all my other PC's are set for program performance optimization.
    Hope some one finds this helpful.

  • Homesharing - on creating I get 'could not be activated because an error occurred (5506). what does this mean and how to I get this set up.

    What does this mean "could not be activated because an error occurred (5506).  Can anyone help me to override this and get Homesharing up and running. Thx

    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Here's a link to the complete error code page:
    Resolve iOS update and restore errors - Apple Support

  • Revel Error Message: "Some files could not be uploaded."

    Error Message: "Some files could not be uploaded. 1 file was unable to be uploaded and was skipped." I am a Revel user from its inception. I have never had upload errors before in Adobe Revel. I am trying to upload jpeg files in the same way I have done for months, which is by dragging and dropping files directly into an album I have created. Starting yesterday, only some files upload properly. Others receive the above error message. When I have tried to re-upload the jpegs which have not gone, I receive either the same error message or a slightly different error which indicates the files are not uploading because they are duplicates. They're not duplicates and appear nowhere else in my Revel albums. I have rebooted my Window 7 PC, I have repeatedly logged out and back into Revel. I have tried both Firefox and IE. I have tried creating new albums and uploading the failed files to a new album. I have cleared my Firefox cache. I have tried both the "drag and drop" feature and the "Add Photos or Videos" button in Revel. I have tried using the "Export to Revel" feature in Adobe Photoshop Elements 11. I have tried uploading never-before-attempted files, and - on average - only 25% of those brand-new files are uploading. I am a subscriber and pay for the Revel service, so I am not bumping into any upload quotas. I have read through these forums and have found problems similar to mine as far back as May 2013, but none of the problems ever seem to have been resolved other than the users simply giving up. Can you help? I am becoming increasingly confused with respect to which files have succeeded and which files have failed. Thank you. -Dori

    Yvonne-
    You can have many libraries with many albums and files within them. Each library is independent, so if you upload a file to two libraries then you two copies. If you put a photo from a library in albums that live within that library, then there is only one copy in the library that each album has access to so it will show up when you view the album. This might help : http://forums.adobe.com/message/5197228#5197228.
    I found a few incomplete files in your account also. We will take care of this for you and contact you when it is complete.
    Pattie
    Some of these links might also be useful to you:
    Revel FAQ’s:
    http://forums.adobe.com/community/revel/faq
    especially:
    FAQ: Where can I learn tips and tricks about Revel? http://forums.adobe.com/message/5798092#5798092
    FAQ: How do I share my photos in Revel? http://forums.adobe.com/thread/1295026
    FAQ: How do I add (upload) files to revel? http://forums.adobe.com/thread/1162795?tstart=0

  • Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

    Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator.  Error is [0x80004005-00000000-00000000].
    In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
    moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
    + at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
    mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that. 
    But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
    a new, unusual issue I have seen as well. 
    We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
    up.
    Thanks.

    Hi,
    You can refer to the following steps to rebuild an Offline Address Book.
    1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
    2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
    3. Start Outlook and download OAB.
    What's more, here is an article for your reference.
    How to Quickly Rebuild an Exchange 2010 Offline Address Book
    http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Error Message: "A virus was detected in FILENAME. This file will not be uploaded"

    I have been synching files using Creative Cloud Connect for many months. During the past few weeks, I get the message "Some files failed to sync". When I click on "Learn more", it has 3 files there and all have the message "A virus was detected in filename . This file will not be uploaded". I scanned all three files with AVG and Malwarebytes (installed on my system) and both report that there is no virus in those files. I have tried to chat with support but I could not find any resolution with them. I believe that I never got to the right place. I was connected with 5 different people. At the end of the last discussion I spoke to Adobe Captivate support. It so happens that the files with that error are all Adobe Captivate files. But that support also concluded that they couldn't help. I could not find similar entries in the forums either. Did anyone else have this problem?
    I appreciate any help.
    Angela

    No unfortunately, I have not.  I spent over an hour on the phone with them already regarding this topic. In the end, the support in Adobe Captivate (that's the 5th support group they connected me to) told me that I wasn't allowed to upload Captivate files since Adobe Captivate 8 is not a CC application and that's why the problem was happening. I am absolutely sure that this is untrue since I have many Captivate files on CC. I think the key will be to get to the right support group. Good luck! I really hope you find a solution. Keep me informed. Thanks.

  • Virus Detected (403), Your file could not be uploaded because it contains a virus.

    From a Windows 7 Ultimate PC I tried to upload a PDF portfolio containing 35 PDFs. The upload failed with the message "Virus Detected (403), Your file could not be uploaded because it contains a virus."
    It is highly unlikely that this PDF portfolio or its 35 PDFs contain a virus. It passed a scan by Microsoft Security Essentials. Any suggestions?
    Bill

    Hello,
    I've got the same 403 error when I want to upload a ebook (purchased on peachpit, see this url for ebook), but when I scan it (windows 8 / avast) no virus found.
    Olivier

  • CV02N Error in Windows 7: This file could not be found!

    After uploading a file to the DMS, we could usually double click the file name and the file will be opened automatically in WORD.
    This was succeeded in Windows XP.
    But in Windows 7 environment, after clicking the file name,  the WORD is started, no file opened. It says: This file could not be found!.
    Is there any solution about this issue? Thanks!
    BTW, I have tried GUI 720. But the issue remained the same.

    jcaverly wrote:
    I imported from the external drive, and see 'Add' highlighted, now what.
    Sorry I'm being so dense, all the language seems arbitrary.
    Now what? You've imported the photos, do whatever you want with them.
    You should really consider reading or watching some basic tutorials about Lightroom, such as
    Lightroom 5 - Free Quick Start Guide PDF eBook | The Lightroom Queen

  • Deployment error  "file could not be uploaded because it is too large"

    Hi,
    I'm trying to deploy a WAR application of 220 mb and the upload page fails the the error "The file could not be uploaded because it is too large". Is there any way to workaround this problem ?. What is the limit for a WAR application ?.
    Regards,
    Paulo

    Paul ,
    Currently we have a limit of deployment archive size to be less than 100 MB.
    Thanks

  • Localizing "The file could not be uploaded because it is too large"

    When uploading file af:inputFile in case of larger file as limited in web.xml then this message appears:
    Warning: The file upload failed
    The file could not be uploaded because it is too large
    How to localize this message (maybe some from http://docs.oracle.com/cd/E15523_01/apirefs.1111/e15862/toc.htm?) or how to catch this error to show custom message?
    JDev version: 11.1.2.1.0
    Regards,
    Sašo

    Hi,
    Do you want to try to override the error message as mentioned here?
    http://docs.oracle.com/cd/E14571_01/apirefs.1111/e15862/toc.htm
    af_inputFile.MSG_UPLOAD_ERROR      Summary error text used to generate a faces message on a failed file upload.
    af_inputFile.MSG_UPLOAD_ERROR_DETAIL      Detailed error text used to generate a faces message on a failed file upload.
    Thanks,
    Srini.

  • Error Uploading Files - One or more files could not be uploaded

    Hi, I used Adobe SendNow without any problems for years.  Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files.  Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again.  If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files.  I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

    Hi,
    Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
    If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
    (The other way to upload files is to simply drag and drop them.)  If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
    Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
    You should now see the folder you just created. Open it up, and select the files you want to send.
    If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

  • Regarding : LSMW return code 7 file could not be uploaded

    Hi all i have a problem doing lsmw when i go for the 3 rd option after creating a structure in lsmw the moment i press copy fields  from the menu i enter no. of fileds and length it asks for the txt file i attach it and when after attaching i press enter it says file could not be uploaded return code 7.
    What is this error and as to why it is happening ?? and when i asked my friend to do it in his system who is somewhere else he says it is running on my system i am working currently on ECC 6 version of sap.
      Please tell me as why is this happening on my system..
    <removed_by_moderator>
    regards
    singh
    Edited by: Julius Bussche on Jul 27, 2008 6:08 PM

    where is the file located? please check if the file is being accessed by anyone else or if the file is open while your trying to attach it.
    hope this helps.
    tyken

  • Cs5 camera raw: "this file could not be created" problem

    When I'm attempting to save raw files in any format (jpeg, dng, tiff, etc) to a different directory from where they're intially opened from I get "this file could not be created" error.  It saves fine if goes to the same directory where the file has been opened from.
    The problem started happening for no apparent reason.  There have been no changes to the system (no new installs, etc), except for recent adobe updates, but I can't find any other users complaining about this problem.  This happens on admin and all other accounts.  Any suggestions on how to fix it would be much appreciated.  Thanks in advance.
    photoshop cs5 / win7 64-bit

    Hm, perhaps a folder closer to the root than the folder you have selected has a permissions issue.
    Is the folder you're trying to use rooted on the hard drive (i.e., does the path begin with a drive letter)?
    Keep in mind that whether you are an Administrator or not, with Windows UAC enabled the app is normally not running as an Administrator.  That can affect permissions.  You might want to either try running the app via Run As Administrator or temporarily disable Windows UAC to see if this is an issue.
    How are you starting Camera Raw?  From within Photoshop or Bridge?
    Also, do you have the latest Camera Raw update?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4926
    -Noel

  • I am an absolute newcomer to Lightroom.  I have downloaded images from camera (OMD EM1) and divided them into folders.  Some folders work ok in Develop mode.  With other folders I get the words "This file could not be found".  What should I do

    As an absolute newcomer to Lightroom 5 I have downloaded images direct from camera (IOlympus EM-1) and divided them into folders. When I go into Develop mode, some folders can be developed ok , but with images from two other folders I get the message "This file could not be found".  What should I do?

    may i suggest opening the files in Olymous Viewer 3  and exporting them (you can do some editing there if you wish or not) asTIFF files. After that you can import the new files into LR. LR seems to like tiiff more than .orf files 
    The advantage to using OV3 is that it seems to do a much better job converting RAW EM1 files. Colors are more accurate ( my red flower pot turned orange when loaded directly into lightroom)
    . The tiff files just LOOK better in LR  after the conversion . there is a youtube on this subject and when i tried it myself i was impressed 

Maybe you are looking for