SSIS Migration between Servers

Good Day,
I am in the process of moving my ssis package development to a new machine.  I have zipped up all of my development/solution files and put them on the new machine...put them in place...but when I try to test them within Visual Studio I am getting a build error that says
  Error 3 Cannot create the output file "C:\Documents and Settings\mandolin\My Documents\Visual Studio 2005\Projects\Transfer and Load Enrollment Data\Transfer and Load Enrollment Data\bin\CUP Enrollment Data Pickup.dtsx": The device is not ready.  .  0 0 
Additionally, but related, I can only open some projects within the solution.  I am getting the following error when I try to open "some" of the packages within the solution:
    The Device is not ready.  (Exception from HRESULT: 0x80070015)
Can someone offer some advice on just what is happening here?  I would really appreciate any thoughts or advice.
Thank you in advance.

I have copied the SSIS package from a server to my local drive for modification. In Server it was in D drive. My local one is in C Drive. I was getting the same error message. After looking at more detail, I found that in the Configuration of the Project,
the Output Path was specified to D:\XXXX and DeploymentOutputPath also has D:\XXX. After changing both of them to C:\XXXX, it is working fine. You need to specify those path correctly as your project path.
You can find those two fields (variable) by going through following steps:
1. Right click on Project
2. Select Properties
3. From the Left pane click on Build and Right pane will show OutputPath
4. From the Left pane click on Deployment Utility and Right pane will show DeploymentOutputPath

Similar Messages

  • Best way to migrate between servers Server 2012

    I want to image or clone my old server and install on the new server. I was looking to go the route of ImageX/DISM and clone the old one, then burn the image to a DVD. Am I on the right track? I tried using Windows AIK for Windows 7, but it gives me error
    50 on the final step. What should I do to easily move my existing server to the new one. I don't want to do all Windows Updates and server roles over again. Also, this is not a DC.

    Hi,
    I think AIK for windows 7 cause the problem.
    Try the latest version for windows 8.1.
    Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update
    http://www.microsoft.com/en-in/download/details.aspx?id=39982
    Hope this helps.

  • Mailbox migration between two Exchange 2013 servers is horribly slow

    Hi,
    when migrating mailbox between 2 exchange 2013 servers,it s horribly slow. I have found some articles which describing problems about content indexing and missing AD group. This is not my problem, I have tried solutions but it didn't work. Both exchange
    are next to each one, same VLAN, same switch. Just migrating between databases.
    When I start batch jobs it is migrating only 1 mailbox at once and speed is really slow (2000 - 3000 mail items per 5 minutes). So mailboxes which have 10GB it's migrating 3 hours. My server is on 1gbps LAN.
    I have also checked MsExchangeMailboxReplication.exe.config on both servers:
        MaxActiveMovesPerSourceMDB="20"
        MaxActiveMovesPerTargetMDB="20"
        MaxActiveMovesPerSourceServer="100"
        MaxActiveMovesPerTargetServer="100"
        MaxTotalRequestsPerMRS="100"
    Do you have any idea where to look why only 1 mailbox is migrating at once?
    Thanks

    Hello,
    For the reason why only 1 mailbox is migrating at once when you start batch jobs, there is no official articles or blog to explain it.
    I recommend you check if the speed is slower when you move a smaller mailbox. If the issue doesn't occur, I recommend you set
    the AllowLargeItems parameter.
    Here are some articles for your reference.
    New-MigrationBatch
    http://technet.microsoft.com/en-us/library/jj219166(v=exchg.150).aspx
    Exchange 2013 Local Mailbox Moves
    http://www.msexchange.org/articles-tutorials/exchange-server-2013/mobility-client-access/exchange-2013-local-mailbox-moves-part1.html
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Service Profiles Migration between Server M2 and M3

    Hi Cisco Top Guns!!!
    I have tried to migrate some service profiles between servers M2 (with M81KR) to M3 (with Vic 1240 and Vic 1280) and Windows 2008 R2 recognized the interfaces on M3 as new interfaces.
    The ghost devices interfaces (old interfaces) still presents on Windows and to rename the new interfaces or apply the same IP configurations, I need to remove the ghosts interrfaces.
    On my opinion, this change goes against the UCS philosophy.
    I have a case opened with Cisco Developed Team and now Im sharing this issue with the community. Anyone have benn passed for this problem too?
    Regards,
    Fábio Henrique Teixeira - System ITS

    This is a hardware change to the operating system. While UCSM can abstract the MAC/WWPN/WWNN information, the operating system recognizes a hardware adapter difference and will instatiate new devices. This is an OS issue. Some OS's (Linux) will allow you to set a flag to ignore the hardware change. I'm not aware of whether and what versions of Windows that will allow the same behavor. We cannot modfy the hardware identification change, as we use it within UCSM to manage allowable firmware bundles and adapter polices (vnics/vhbas/fabric failover)

  • Migrating Printer Servers

    Praxair we are going from 2008 R2 to 2012 R2.

    What servers are you running your print serves on..? I would keep the same IP address between servers after you do the migration.Not sure if these links help:http://blogs.technet.com/b/canitpro/archive/2013/06/17/step-by-step-install-use-and-remove-windows-s...http://www.printerlogic.com/blog/how-to-migrate-from-windows-2003-to-2008-r22012-r2-print-server/

  • Communication between servers on different FIs

    Just want to verify communication between UCS servers on same chassis but having active vNICs on different FIs (Diagram attached). I suppose all commuication between server-A & server-B will happen through Layer 2 switch as server-A will generate an ARP request for Server-B, that will be passed over to FI-A and then to L2 switch down to FI-B, where server-B will respond back with it's MAC that will then be passed to Server-A via FI-B to L2 switch to FI-A.I don't expect any traffic between servers A & B be routed via firewall? Is there anything I need to be careful about in this design? Going forward we will have multiple subinterfaces on the firewall for different VLANs and all servers will use Firewall as default gateway.

    you may want to look at the throughput of your firewall for server-server traffic in different VLANs. If your L2 switch is 10G but your firewall is only 1G then you could have a potential bottle neck.

  • I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook.  Is there Apple software that will work on the notebook allowing me to open Pages, Numbers or Keynote documents that I've placed in Dropbox?

    I'm a Dropbox user and I migrate between my iMac and a Toshiba notebook.  Anyone know if there is Apple software that will work on the Toshiba that will allow me to open Pages, Numbers or Keynote documents when I access them in Dropbox? 
    Maybe I should just always export from Pages into Word  (and likewise for the other types) before I upload to Dropbox?  I hope not!!

    If you don't want to export files and consider the Microsoft formats to be your basic working format, then you need to consider either using MsOffice for Mac or LibreOffice instead of the iWork suite.
    You could always run a virtualised OSX on the Toshiba, but I don't think Apple will appreciate me telling you how to do that.
    Peter

  • How can we do the data migration between Oracle Applications and SAP R/3.

    Hi All,
    How can we do the data migration between Oracle Applications and SAP R/3 system.What are all the possible ways to move bulk data from Oracle Apps to SAP r/3 system.
    Provide any 3rd party tools which supports data migration and also pls rpovide the SAP's own data migration tools with supports the above feature.
    Awaiting for best possible solution.
    Thanks in advance.
    Regards
    Dharmaraju

    the 3rd party tool is ETL , you can use ETL tool and the prepare the load files then you can use LSMW method to upload the data to SAP.

  • Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

    I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
    The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
    I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
    Tim

    Sorry Tim, is that all 50 blue screen if live migrated?
    Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
    The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
    Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
    CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Is it possible to do a LCM migration between 11.1.1.2 and 11.1.1.4 of epm?

    Hello all,
    Is it possible to do a LCM migration between 11.1.1.2 and 11.1.1.4 of epm?
    Thanks.

    Like I said, I haven't (literally) touched the product formerly known as Analyzer since 2001, but what I recall was creating a connection to a database and then building reports with that connection. I am going to guess that WA hasn't changed that much.
    The error message you noted:
    org.springframework.dao.DataAccessException : error creating essbase Database object.Would that error exist if that database connection (okay, I am probably using the wrong terminology, but you get the idea) existed on the target before the migration.
    It might also be worth checking Oracle Support to see if this is a known issue.
    Regards,
    Cameron Lackpour
    Edited by: CL on Dec 4, 2012 12:00 PM
    P.S. Useless trivia -- I attended training at WiredForOlap's "headquarters" which I was 100% sure was a former home dentist office converted to a software company headquarters. It has to be said that their model worked as that had to be some time in the mid 1990s.

  • SSIS migrated from 2005 to 2008

    Hi,
    SSIS migrated from 2005 to 2008. The job ended successfully and text reports were created. However, in job history indicates the step still running. What did I miss during migrating SSIS process? Thanks.
    Chris

    Click on Refresh button changed nothing?
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to do data migration between single node and multi node HANA systems ?

    Data migration between single node and multi node HANA systems ?
    What are limitations ?
    What should be the best practices ?

    Data migration between single node and multi node HANA systems ?
    What are limitations ?
    What should be the best practices ?

  • Copy file between servers, passing on firewall

    I'm try copy a file between servers with Windows NT. I mapping the target server to drive X and test copying a file in windows explorer and command window and the files copy is OK. But if I try with a java class don't.
    I'm try with FileInputStream (read) and FileOutputStream (write) but don't. I have use the Runtime.exec() for execute a DOS command but don't("cmd.exe /c copy c:\myfile.txt x:\"). this second showme a message "username incorrect or bad password", but the same sentence I run in a command window and the copy is OK!
    What can I do?

    Hi,
    try to use HTTP for the transfer between
    the two servers. Normally You can pass the
    firewall using HTTP (like browsers do).
    Therefor use classes in the java.net packages.
    CU,
    Mathias

  • Distributed File System Replication between servers with different performance

    If Distributed File System Replication is set between servers with different performance. What will happen with the performance of the fastest server? Will the performance decrease to match the performance of the
    slowest server in the chain? I mean, will the source slow down (processor speed) if the recipients can't keep up? 

    Hi,
    If you mix different performance server for DFS replication, most of improvements on the fastest server are disabled for backwards compatibility and the performance decrease to match the performance of the slowest server.
    For more detailed information, please refer to the article below:
    Tuning replication performance in DFSR (especially on Win2008 R2)
    http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
    Best Regards,
    Mandy 
    If you have any feedback on our support, please click
    here .
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Managing Datasource specification when migrating between environments

    Hi,
    We have a Data Services 3.2 realtime job that uses many Base match transforms.
    These Base match transforms are used as simple candidate selectors which do not perform any matching and fire native SQL queries.
    As we are currently migrating from DQXI 11.6 to DSXI 3.2 we were running this job in our development environment.
    So the datasource specified in these candidate selection transforms were pointing to our development database.
    We are now migrating to our test environment which has a separate database of its own having the same tables.
    So, is there a central place where we can update the database details, so that its reflected in all the candidate selection transforms ?
    Or, do we need to manually drill down into each candidate selection transform and change the datasource specification there before pushing the jobs realtime?
    In our old DQXI system, each project had a XML file which we migrated between environments and we modified all occurrences of the old datasource with the new one.
    Can something similar be done in DSXI ?
    Please let me know. Any inputs will be helpful.
    Thanks,
    Saurav.

    you can define multiple configuration for the Datastore that you are using in candidate selection, each for DEV, PROD etc env
    and Define a System Configuration for each env, in System Config, you can specify which Datastore configuration to use
    you can run the job using the System Config of that env
    refer techincal manual for multiple Datastore Configuration and System Configuration

Maybe you are looking for