SSL Between Weblogic and IBM MQ

Dear All,
I would like to know the SSL configuration steps between Weblogic and MQ Communication.
The existing setup is, To put message in MQ, We are using MQ Java API directly. To get message from MQ, We are using JMS API with binding file.
Now, we are in a position to enable SSL in those communication between Weblogic and MQ. Here Weblogic is Treated as Client & MQ is treated as Server. If any one throw some light here would be greatful for us to enable 2-way SSL.
In High Level, Initially we planned for One-Way SSL like below,
1. Create the Trust Store in MQ Server
gsk7capicmd -keydb -create -db "/var/mqm/qmgrs/WLMQTest/ssl/WLMQTest.kdb" -pw serverpass -type cms -expire 365 -stash -fips
2. Create Self-Signed Certificate Initially for MQ Server
gsk7capicmd -cert -create -db "/var/mqm/qmgrs/WLMQTest/ssl/WLMQTest.kdb" -pw serverpass -label ibmwebspheremqwlmqtest -dn "CN=WLMQTest,O=,C=" -expire 365 -fips -sigalg sha1
gsk7capicmd -cert -extract -db "/var/mqm/qmgrs/WLMQTest/ssl/WLMQTest.kdb" -pw serverpass -label ibmwebspheremqwlmqtest -target "/var/mqm/qmgrs/WLMQTest/ssl/*WLMQTest.crt*" -format ascii -fips
3. Create the Key Store in Weblogic Server
keytool -genkey -alias mydomain -keyalg RSA -keystore keystore.jks -keysize 2048
4. Copy the Public SSL Server Certificate to the Weblogic Server
Copied the WLMQTest.crt from MQ Server into a directory under Weblogic Server Domain
The below command list the content of the keystore.jks
keytool -list -keystore keystore.jks
Keystore type: JKS
Keystore provider: SUN
Your keystore contains 1 entry
mydomain, Dec 26, 2011, PrivateKeyEntry,
Certificate fingerprint (MD5): E7:B6:4C:02:A7:DE:A3:66:27:66:38:A1:87:DF:8F:0F
And tried to import the WLMQTest.crt
keytool -import -alias mydomain -file WLMQTest.crt -keystore keystore.jks -storepass serverpass
We got the error like below,
keytool error: java.lang.Exception: Public keys in reply and keystore don't match
5. Configuring the Channels.
Please advice, Is it a right way? Positively expected your valuable comments
Edited by: user10094300 on Dec 26, 2011 1:17 AM

Check this:
http://www.ibm.com/developerworks/websphere/library/techarticles/0510_fehners/0510_fehners.html

Similar Messages

SSL between XI and a business partner

Has anyone gotten SSL between XI and an external business partner up and running? I would like to have a short discussion with someone who has been successful. I am trying to send messages out from XI that require XI to be active. Please don't direct me to the documentation because we have read it and it has not been very helpful.
regards,
Chris

Hello Richard,
I can't see we have been successful but we are close. Here are the steps:
1. HTTPS service needs to be active (Tx: SMICM)
2. You need to load the SSL certificate key in your XI system (Tx: STRUST)
3. You will need to create an RFC (type G)pointing to your target server. Then select the SSL (acitve) and the private key you want to use (you will need one RFC destination by server key).
4. Use your RFC destination in your HTTP Adapter:
on the HTTP adapter don't select URL address but select RFC destination.
I hope this will help.
PLease don't heistate to ask if you need more detail.
Mustapha

SSL between NSAPI and WLS with custom certificate and RequireSSLHostMatch=true fails

I am trying to use SSL for communication between NSAPI and WebLogic
server (server authentication at the NSAPI).
Therefore, a custom server certificate is installed on WLS, containing this
server's hostname. The NSAPI is configured (RequireSSLHostMatch=true) to
check the hostname contained in the certificate against the WebLogicHost
parameter in the "obj.conf" file. The corresponding TrustedCAFile is installed
for NSAPI.
The SSL setup seems to work ok, but when matching the hostname, it seems like
NSAPI is trying to do a string-match against the numeric IP of the WebLogicHost,
not on the hostname as configured in the WebLogicHost parameter.
The relevant entry in the "obj.conf" file:
<Object name="weblogic" ppath="*">
Service fn=wl-proxy WebLogicHost=btsun2a.muc \
WebLogicPort=7162 \
Debug=ALL \
SecureProxy=ON \
TrustedCAFile=/home/qx13604/wls61/config/testdomain/TC_RootServer_PEM_Class0.pem
RequireSSLHostMatch=true
</Object>
I am using WLS6.1 with NSAPI (both Solaris). The content of "wlproxy.log" is as
follows.
Any ideas?
Content of "wlproxy.log":
Thu Oct 11 12:30:22 2001 INFO: SSL is configured
Thu Oct 11 12:30:22 2001 INFO: Initializing SSL library
Thu Oct 11 12:30:22 2001 Loaded 1 trusted CA's
Thu Oct 11 12:30:22 2001 INFO: Successfully initialized SSL
Thu Oct 11 12:30:22 2001 INFO: SSL configured successfully
Thu Oct 11 12:30:22 2001 ....relFile.../index.jsp...
Thu Oct 11 12:30:22 2001 URI=[index.jsp]
Thu Oct 11 12:30:22 2001 Initializing lastIndex=0 for a list of length=1
Thu Oct 11 12:30:22 2001 attempt #0 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #1 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #2 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #3 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #4 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 attempt #5 out of a max of 5
Thu Oct 11 12:30:22 2001 general list: trying connect to '160.50.106.101'/7162/7162
at line 1156 for '/index.jsp'
Thu Oct 11 12:30:22 2001 New SSL URL: match = 1 oid = 22
Thu Oct 11 12:30:22 2001 Going to check the general server list
Thu Oct 11 12:30:22 2001 WLS info : 160.50.106.101:7162 recycled? 0
Thu Oct 11 12:30:22 2001 Hdrs from Client:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept]=[image/gif, image/x-xbitmap,
image/jpeg, image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs from Client:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[connection]=[Keep-Alive]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[user-agent]=[Mozilla/4.72 [de]C-CCK-MCD
(WinNT; U)]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[host]=[btsun1a.muc:99]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept]=[image/gif, image/x-xbitmap, image/jpeg,
image/pjpeg, image/png, */*]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-encoding]=[gzip]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-language]=[de,en]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[accept-charset]=[iso-8859-1,*,utf-8]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-WebLogic-Force-Cookie]=[true]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Client-IP]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[X-Forwarded-For]=[160.50.136.171]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated]=[wwws/ns-homeV417/docs/index.jsp]
Thu Oct 11 12:30:22 2001 Hdrs to WLS:[Proxy-Path-Translated-Base]=[wwws/ns-homeV417/docs]
Thu Oct 11 12:30:22 2001 INFO: sysSend 52
Thu Oct 11 12:30:22 2001 Partial read socket
Thu Oct 11 12:30:22 2001 INFO: SSLWrite sent 0
Thu Oct 11 12:30:22 2001 INFO: Host (btsun2a.muc) doesn't match (160.50.106.101),
validation failed
Thu Oct 11 12:30:22 2001 ERROR: SSLWrite failed
Thu Oct 11 12:30:22 2001 SEND failed (ret=-1) at 549 of file URL.cpp
Thu Oct 11 12:30:22 2001 *******Exception type [WRITE_ERROR] raised at line 550
of URL.cpp
Thu Oct 11 12:30:22 2001 got exception in sendRequest phase: WRITE_ERROR [os error=0,
line 550 of URL.cpp]: at line 944
Thu Oct 11 12:30:22 2001 INFO: Closing SSL context
Thu Oct 11 12:30:22 2001 INFO: sysSend 14
Thu Oct 11 12:30:22 2001 Failing over after sendRequest exception
Thu Oct 11 12:30:22 2001 request [index.jsp] processed ..................

I tried some other case and configured a certificate containing
the numeric IP as hostname. The authentication works fine then,
but it wouldn't be nice to hard-code the IP in the certificate
(btw. the WebLogicHost parameter is still given as DNS name, not
as IP address).
Has anyone got a solution for this?
"Wolfgang Jodl" <[email protected]> wrote:
>
I am trying to use SSL for communication between NSAPI and WebLogic
server (server authentication at the NSAPI).
Therefore, a custom server certificate is installed on WLS, containing
this
server's hostname. The NSAPI is configured (RequireSSLHostMatch=true)
to
check the hostname contained in the certificate against the WebLogicHost
parameter in the "obj.conf" file. The corresponding TrustedCAFile is
installed
for NSAPI.
The SSL setup seems to work ok, but when matching the hostname, it seems
like
NSAPI is trying to do a string-match against the numeric IP of the WebLogicHost,
not on the hostname as configured in the WebLogicHost parameter.
The relevant entry in the "obj.conf" file:
<Object name="weblogic" ppath="*">
Service fn=wl-proxy WebLogicHost=btsun2a.muc \
WebLogicPort=7162 \
Debug=ALL \
SecureProxy=ON \
TrustedCAFile=/home/qx13604/wls61/config/testdomain/TC_RootServer_PEM_Class0.pem
RequireSSLHostMatch=true
</Object>
I am using WLS6.1 with NSAPI (both Solaris). The content of "wlproxy.log"
is as
follows.
Any ideas?

What is difference between Weblogic and OSB

Hi,
The title says it all.
What is the difference between Oracle WebLogic and Oracle Service Bus?
Assuming both products are part of the Oracle strategy, when would I use each product?
I am really struggling as I cannot find a link with this information.
Many thanks
Jason

Jason,
Weblogic is application server. Service Bus is a product which runs on top of Weblogic.
You can find plenty information about both products on the web.
Regards,
Milan

SSL between ITS and LDAP

Hello:
I have a ITS 6.20 patchlevel 22 with Linux Red Hat Enterprise 4. I have configured the service PAS to access to the Employee Self-Service of the ITS via LDAP.
I want to configure SSL between my ITS and the LDAP, but I read in note 456666 that it is only possible for Microsoft Windows and my ITS is Linux.
Is it correct?
Regards,
Felipe Sánchez

Hi,
~ldapport=636
636 is normally the secure port or the LDAP SSL port, but this depends on the directory server and additionaly things also.
Therefore I advise you to use example or SDK coding from your directory server or vendor. Normally things like certificate exchange / key exchange and configuration needed to ensure the secure configuration.
All these things are vendor dependend steps and therefore SAP has no documentation about it,e.g. Novell directory server has a SDK with example coding for SSL connections. This coding in combination with SAPs PAS SDK can be used to build a shared library with LDAP SSL.
regards,
-markus

My problem when I enable SSL in Weblogic and I don't have a trusted CA cert

<h3>Hello
I've enabled weblogic SSL
Now when I want use Weblogic Administration Console with Https protocol it works
But at first when I enter to its addredd my Web Browser(Mozella Firefox) show me this exception </h3>
"+This Connection is Untrusted You have asked Firefox to connect+
+securely to localhost:7002, but we can't confirm that your connection is secure.+
+Normally, when you try to connect securely,+
+sites will present trusted identification to prove that you are+
+going to the right place. However, this site's identity can't be verified+."
<h3>
I know that it's because I don't have any certificate of trusted certificate authorities (however when I add the exception it goes to the administration console)
Suppose I want develop an application for a small company and it uses HTTPS for its loging page and I don't have
any trusted CA certificate , when users want login , web brwoser shows the exception
</h3>
<h3>
Know I want ask
can I create a valid certificate by myself without connecting a trusted certificate authority and doing its official stages ? In other word , can I
be a Trusted Certificate Authority for myself and configure Web Browser for getting rid of that exception ?
My aim is to finding a way to use SSL and make a secure connection without receiving the exception in Web Browser and without
connecting certificate authorities and doing its official corresponding and paying cost
do you have any solution for me ?
Thanks
</h3>

Hi
I enabled SSL Debugging in Weblogic and it show me this log when the WebBrowser want user https :
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 1639942021>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received HANDSHAKE>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ClientHello>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 58>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 1583>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 4>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 SSL3/TLS MAC>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <181142934 received ALERT>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.alert.AlertHandler.handleAlertMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at javax.net.ssl.impl.SSLSocketImpl.startHandshake(Unknown Source)
at weblogic.server.channels.DynamicSSLListenThread$1.run(DynamicSSLListenThread.java:130)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <Alert received from peer, notifying peer we received it: com.certicom.tls.record.alert.Alert@47204d1a>
<Jan 4, 2012 4:18:48 PM IRST> <Warning> <Security> <BEA-090482> <BAD_CERTIFICATE alert was received from 172.17.33.59 - 172.17.33.59. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <close(): 424502001>
<Jan 4, 2012 4:18:48 PM IRST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 1639942021>
Can it give helpful glue ?
Thanks

Weblogic JMS bridge between Weblogic and oracle Advanced Queue

Hi,
We are facing some issues when we are trying to integrate with Oracle AQ JMS through Weblogic.
We have configured a Foreign AQ server which points to the oracle Advanced Queue and we are trying to create a Weblogic JMS bridge between AQ and weblogic. The bridge works perfectly if create the connection factories and bridge destinations with NonTX mode. The issue is with XA mode. Also we have deployed the Resource adaper for XAResource to use XA transactions.
No help is available for the exception on google too :)
Following is the exception we are getting.
<An error occurred in bridge "aqjmsbridge" during the transfer of messages (javax.resource.ResourceException: Failed to setup the Resource Adapter Connection for enlistment in the transaction, Pool = 'eis/jms/WLSConnectionFactoryJNDIXA', javax.transaction.SystemException: start() failed on resource 'eis/jms/WLSConnectionFactoryJNDIXA': XA_OK
javax.transaction.xa.XAException: method start should not be called on weblogic.transaction.internal.IgnoreXAResource
at weblogic.jms.foreign.IgnoreXAResourceImpl.start(ForeignAQIntegration.java:260)
at weblogic.connector.security.layer.AdapterLayer.start(AdapterLayer.java:513)
at weblogic.connector.transaction.outbound.XAWrapper.start(XAWrapper.java:466)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1184)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1117)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:275)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:516)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:443)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionWrapper.invoke(ConnectionWrapper.java:218)
at $Proxy59.receive(Unknown Source)
at weblogic.jms.bridge.internal.MessagingBridge.processMessages(MessagingBridge.java:1427)
at weblogic.jms.bridge.internal.MessagingBridge.beginForwarding(MessagingBridge.java:1002)
at weblogic.jms.bridge.internal.MessagingBridge.run(MessagingBridge.java:1079)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
.).>
Will appriciate any help for the above.
Thanks and Regards,
Navin

Maybe this if of any help:
- Re: Help with creating AQ JMS
or
- Re: AQ Weblogic integration - JMS-107: Operation not allowed on Connection

SSL between WebLogic 10.0 and IIS 6.0 does'nt work

Hi,
I don't understand why the SSL connection between WL10.0 and IIS 6.0 doesn't work. My ini file is below:
WebLogicHost=10.0.162.31
WebLogicPort=7002
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic
PathTrim=/weblogic
Debug=ON
SecureProxy=ON
TrustedCAFile=C:\trustedca.pem
EnforceBasicConstraints=off
RequireSSLHostMatch=false
where 'trustedca.pem' is the pem extracted (and converted) from wlsdemoca contained into DemoTrust.jks and '7002' is my ssl listen port.
I need to set any more parameter??
My wlpsoxy.log for one request is:
================New Request: [crl4/.wlforward] =================
Thu Apr 17 10:27:32 2008 <351612084388524> SSL is not being used
Thu Apr 17 10:27:32 2008 <351612084388524> resolveRequest: wlforward: /crl4/
Thu Apr 17 10:27:32 2008 <351612084388524> URI is /crl4/, len=6
Thu Apr 17 10:27:32 2008 <351612084388524> Request URI = [crl4/]
Thu Apr 17 10:27:32 2008 <351612084388524> attempt #0 out of a max of 10
Thu Apr 17 10:27:32 2008 <351612084388524> Trying a pooled connection for '10.0.162.31/7001/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> getPooledConn: No more connections in the pool for Host[10.0.162.31] Port[7001] SecurePort[7001]
Thu Apr 17 10:27:32 2008 <351612084388524> general list: trying connect to '10.0.162.31'/7001/7001 at line 1239 for '/crl4/'
Thu Apr 17 10:27:32 2008 <351612084388524> INFO: New NON-SSL URL
Thu Apr 17 10:27:32 2008 <351612084388524> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Apr 17 10:27:32 2008 <351612084388524> EINPROGRESS in connect() - selecting
Thu Apr 17 10:27:32 2008 <351612084388524> Local Port of the socket is 1476
Thu Apr 17 10:27:32 2008 <351612084388524> Remote Host 10.0.162.31 Remote Port 7001
Thu Apr 17 10:27:32 2008 <351612084388524> general list: created a new connection to '10.0.162.31'/7001 for '/crl4/', Local port: 1476
Thu Apr 17 10:27:32 2008 <351612084388524> WLS info in sendRequest: 10.0.162.31:7001 recycled? 0
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: StatusLine set to [200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> parsed all headers OK
Thu Apr 17 10:27:32 2008 <351612084388524> sendResponse() : uref->getStatus() = '200'
Thu Apr 17 10:27:32 2008 <351612084388524> Going to send headers to the client. Status :200 OK
Thu Apr 17 10:27:32 2008 <351612084388524> Content Length = 264
Thu Apr 17 10:27:32 2008 <351612084388524> canRecycle: conn=1 status=200 isKA=1 clen=264 isCTE=0
Thu Apr 17 10:27:32 2008 <351612084388524> closeConn: pooling for '10.0.162.31/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> request [crl4/] processed successfully ..................
Thu Apr 17 10:27:57 2008 <351612084387971> timed out 1 connections, idle for (at least) 25 secs
Any idea that help me?

I had a look into the xlclient.cmd file and went to the JAVA directory which is being used. And did a search for the "cacerts" and found out that there is a file named cacerts in the JAVA_HOME/jre/lib/security folder over there.
But how does that relate to the problem of running the keytool command successfully at the right place (OIM_DC_HOME) ?
Any hints Kevin....
Thanks,
- oidm.

WebLogic SAML 1.1 & Apache as proxy & SSL between browser and Apache

Hi,
I'm trying to configure SAML 1.1 to work with WebLogic Server 10.3.
Here is a short description of the configuration
- Browser connects to Apache front end with ssl https://myserver:444/...
- Apache proxies requests to WebLogic Server instances in http. In the following example one of the WLS instances is listening on the port 555 on myserver.
During the SAML 1.1 requests the following url appears:
https://myserver:444/mysamlits?RPID=rp_00001&TARGET=http://myserver:555/myapp
Here http://myserver:555/myapp is the backend server listening address. Instead it should be the frontend server address instead:
https://myserver:444/mysamlits?RPID=rp_00001&TARGET=https://myserver:444/myapp
Problem:
Despite of all My efforts, WLS picks up the backend protocol and port and puts them in the TARGET. I can't find how to set up WebLogic Server to supply the frontend address as TARGET, so I'm asking help here.
Details:
I try to describe the setup in more detail below.
I have NOT installed mod_wl to Apache because My intention is to employ Apache to simulate a hardware load balancer (HLB).
I have appended the following lines to Apache httpd.conf:
# Added so that we can set the "WL-Proxy-SSL: true"
# HTTP header which tells a back-end WebLogic Server
# that requests are being proxied through a front-end
# SSL load-balancer or proxy server.
<IfModule headers_module>
RequestHeader set WL-Proxy-SSL true
</IfModule>
I have also verified that the header WL-Proxy-SSL is present in requests arriving at the backend WebLogic Server.
On the WebLogic Server side I have
- Frontend Host: myserver
- Frontend HTTP Port:0
- Frontend HTTPS Port:444
I have also tried setting WebLogic Plugin Enabled:true.
Regards,
Kari
Edited by: 858107 on May 11, 2011 10:00 PM: Removed a duplicated subject line.

I was mistaken. TARGET can very well be the backend address. The actual problem was that the browser was getting redirected to the backend address.
That was fixed by resetting the frontend settings:
Frontend Host: <empty>
Frontend HTTP Port:0
Frontend HTTPS Port:0
Kari

Use of Reliable Messaging between WebLogic and a different vendor

Hello,
We have developed an application that is running on the WebLogic App Server v8.1
sp1.
Recently we have received a request/query on providing reliable SOAP messaging
from our application to 3rd party.
I have read the documentation on Reliable messaging support and have noted that
it is only supported between two WebLogic Application servers.
My questions are, since we do not have control of the 3rd party's application,
and it may not be based on a WebLogic App Server:
1. Will this work?
2. Does anyone have any idea of the type of issues that may be experienced?
3. How close is the implementation to the WS Reliable Messaging specification?
So, if the other party was based on an IBM or Microsoft implementation is this
likely to work?
It goes without saying that any work done would need to be very throughly tested
and qualified.
I have looked through the WebLogic Documentation on WebServices as well as searching
this newgroup for other posts on this topic, hopefully I have not missed anything
(If so, my apologies.)
Thanks,
Mike Shea.

Bruce Stephens <[email protected]> wrote:
Hi Michael,
The short answer, at this time, OOTB, WS-RM interop with an unknown
vendor would be doubtful. For a longer answer, David Orchard has a good
review of the emerging web services specs [0]. You might consider ebXML
messaging [1] as a more mature solution.
Thank you Bruce. I will look at these docs.
Mike S.
Hope this helps,
Bruce
[0]
http://dev2dev.bea.com/technologies/webservices/articles/ws_orchard.jsp
[1]
http://e-docs.bea.com/wli/docs70/ebxml/getstart.htm
Michael Shea wrote:
Hello,
We have developed an application that is running on the WebLogic AppServer v8.1
sp1.
Recently we have received a request/query on providing reliable SOAPmessaging
from our application to 3rd party.
I have read the documentation on Reliable messaging support and havenoted that
it is only supported between two WebLogic Application servers.
My questions are, since we do not have control of the 3rd party's application,
and it may not be based on a WebLogic App Server:
1. Will this work?
2. Does anyone have any idea of the type of issues that may be experienced?
3. How close is the implementation to the WS Reliable Messaging specification?
So, if the other party was based on an IBM or Microsoft implementationis this
likely to work?
It goes without saying that any work done would need to be very throughlytested
and qualified.
I have looked through the WebLogic Documentation on WebServices aswell as searching
this newgroup for other posts on this topic, hopefully I have not missedanything
(If so, my apologies.)
Thanks,
Mike Shea.

Difference between Sun and IBM JSSE implementations?

Hi!
We have an applet done with Sun JDK 1.4.2-03 which has to connect a domino server in SSL mode.
During the handshake the connection breaks down.
The most surpising thing is to use IBM JDK to generate the applet, and the applet works.
So we are thinking that there are some differences between these jdk (and so jre) which makes connections available or not.
Does or did someone have the same problem, and find a solution ?
Thanks for your help.
Jerome

HI,
YAA THERE IS SOME DIFFER...B/W SUN AND JAVA. BUT MAYBE BRAND IS DIFFER I THINK THIS IS THE REASON.
IF U FINDOUT SOME REASON THEN PLS MAIL ME
REGARDS

What type of plug in do I need to use between weblogic and tomcat please

Hi,
Can anybody please tell me what type of plugin do I need to install to communicate between Tomcat4.0 and weblogic6.1 sp2.actually I wanted to use a connection pool from my servlet on my local tomact where connection pool is created on remote weblogic server.........?
I have no idea what to do. I tried including the weblogic.jar in my local classpath where my tomcat is sitting. This didnot work . I got the following error......
I want to know is it possible.............?
javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory]
Your response is very inportant......
Thnaks

Thanks a lot for your rely....
then how could I use the remote connection pool in my
local Tomcat server.....?If thats is not possible then
what if organisation have two webservers...? you mean
thay have to create connection pool in two servers
rather on one server and use it every where.....?
Still depends on what you are trying to achieve.
Most clustered systesm use a connections on each server. They sync the data retrieved between servers, not the connections themselves.
If you simply one a single connection point then you need to use a driver that proxies requests to and from the real connection point.
RmiJdbc is free at http://www.objectweb.org/.
There are commercial drivers available, search at http://industry.java.sun.com/products/jdbc/drivers, which provide an enterprise layer for database access. They are probably more robust and feature rich than the above one.

EJB communication between weblogic and websphere

Hello:
I have weblogic 7.1 instance running in machine A and websphere running in machine B. I want to make a call to the ejb deployed from weblogic to websphere. Any experience in this would be very helpful. Or pl. post the procedure.
Thx in advance.

I don't think that there is any magic here, although I've never tried it.
All you need is the compiled EJBHome and EJBObject interfaces in the
classpath of the calling EJB, get an InitialContext in the JNDI namespace of
the target EJB container using the name of the JNDI InitialContext Factory,
do a lookup on the bean making sure to do a PortableRemoteObject.narrow when
you are casting the Home stub with the vendor specific version of
PortableRemoteObject(and that may be the real trick), call the appropriate
create method, and you are rolling.
I guess the question becomes how to make sure that when you are calling
PortableRemoteObject.narrow on the Home stub, that you get the vendor
specific version for the EJB container and JNDI namespace from which you are
doing the lookup.
I guess the answer is, I'm guessing. Have you tried it?
bill
"nebs om" <[email protected]> wrote in message
news:30035468.1103738722864.JavaMail.root@jserv5...
Hello:
I have weblogic 7.1 instance running in machine A and websphere runningin machine B. I want to make a call to the ejb deployed from weblogic to
websphere. Any experience in this would be very helpful. Or pl. post the
procedure.
>
Thx in advance.

JDBC Drivers compatability between Oracle and IBM WSAD 5.1.1

I am using a DataAccessObject pattern. I discovered you can speed up your procesing with SELECT statments us using an OraclePreparedStatment and setting defineColumnType; thereby reducing the number of trips the SQL is sent to the database.
Here is the code:
((OraclePreparedStatement)ps).defineColumnType(1, Types.BIGINT);'ps' is a PreparedStatement.
However, at runtime, I am getting a class cast exception for the below reason. I am using WASD version 5.1.1. I was not aware IBM was using any specific classes in the JDBC drivers.
[2005-05-23 15:36:59,855][Servlet.Engine.Transports : 2][ERROR][{TDAO}{getTWebInfos}{APP0000}{Unknown Contained Application Exception}{External Message:com/ibm/ws/rsadapter/jdbc/WSJdbcPreparedStatement incompatible with oracle/jdbc/OraclePreparedStatement}]
{TDAO}{getTWebInfos}{APP0000}{Unknown Contained Application Exception}{External Message:com/ibm/ws/rsadapter/jdbc/WSJdbcPreparedStatement incompatible with oracle/jdbc/OraclePreparedStatement}
at java.lang.Throwable.(Throwable.java)Could someone please explain this to me? Any help would be greatly appreciated.

I'm not an WSAD expert to be honest, but it's quite possible they are using their own wrappers. Check out what calls you can make on their ps wrapper or more likely conn wrapper - they may have some type of getWrappedConnection functionality as other vendor(s) do in which case you can, eg, cast the connection to OracleConnection and go from there.

Seamless Integration Between Weblogic and Oracle Portal Server

Hi,
Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
The Scenario is as:
A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
Is this feasible, and what version of the 2 servers would support this feature.
Can someone please snd across online resources which deal with my doubt.
many Tx.
Regards,
Mukta

You might want to consider using WSRP to aggregate portlets deployed on
Oracle into WLP. Check edocs and dev2dev for some info on WSRP in WLP.
You can use 8.1 SP3 or later.
Check with Oracle to find out which version of their product offers WSRP
support.
Subbu
Mukta Shetye wrote:
Hi,
Can someone please give me some insight into Seamless integration from Weblogic Portal Server to Oracle Portal Server.
The Scenario is as:
A user logs into the Weblogic Portal, this Portal desktop displays some portlets. Links on these portlets navigate the user to the portlets deployed on Oracle Portal.
Is this feasible, and what version of the 2 servers would support this feature.
Can someone please snd across online resources which deal with my doubt.
many Tx.
Regards,
Mukta

SSL Between Weblogic and IBM MQ

Similar Messages

Maybe you are looking for