SSL connectivity - Weblogic 8.1 and Apache web server 2.0

I'm using a Apache web server 2.0.64 as a front end web server for Weblogic server v8.1 sp6. I have managed setup the connection between both server and now i want to configure the SSL connection Apache web server. However i have face some problems with the SSL connection and i can't figure out the problems. I'm using the ssl.conf* to do the SSL connection. Here are the changes i did on my ssl.conf:
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#<IfDefine SSL>
Listen 443
SSLPassPhraseDialog builtin
SSLSessionCache dbm:logs/ssl_scache
SSLSessionCacheTimeout 300
<VirtualHost default:443>
DocumentRoot "C:/Program Files/Apache Group/apache2/htdocs"
ServerName 10.122.50.218:443
ServerAdmin [email protected]
ErrorLog logs/ssl_log TransferLog logs/access_log
SSLEngine on
SSLCertificateFile conf/ssl/server.crt
SSLCertificateKeyFile conf/ssl/server.key
</VirtualHost>
#</IfDefine>
When i testing the application, it comes out :
NOT Found
The requested URL /secureWebAuth/ was not found on this server.
Apache/2.0.64 (Win32) mod_ssl/2.0.64 OpenSSL/0.9.8o Server at 10.122.50.218 Port 443
What should i do in order to solve this problem? Thanks for your help!!!

Similar Messages

Certificates and Apache Web Server

Hello, I'm using Apache 2 as reverse proxy:
client --SSL---> reverse proxy (apache) - SLL-->other servers
The Client certificate is used by reverse proxy for access to my other
server, but now I have a big problem. One of my servers need a client
certificate to authenticate the client and access, but this
certificate is load in apache (my reverse proxy) and I don't know how
pass this certificate to this server and access to the other server,
and authenticate the client in the "other" server.
Is it possible?

Julin_Parra,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Apache web server/jakarta tomcat

Hey guys!
here's the fact, i installed jakarta-tomcat and apache web server, but i don't know how to integrate them, i mean, I just want to have one http server with the functionality to use servlets. Do I need only jakarta tomcat to have this?, please help me.
and forgive my very poor english! :)

Hallo.
Create or edit the file %APACHE_HOME%/conf/worker.properties
worker.list=ajp13
worker.ajp13.port=8009
worker.ajp13.host=localhost
worker.ajp13.type=ajp13
Edit the file %APACHE_HOME%/conf/httpd.conf
LoadModule jk_module modules/mod_jk.dll
AddModule mod_jk.c
JkWorkersFile "%APACHE_HOME%/conf/worker.properties"
JkLogFile "APACHE_HOME%/logs/mod_jk.log"
JkLogLevel debug
Alias /myWebApp "%TOMCAT_HOME%/webapps/myWebApp"
JkMount /myWebApp/*.jsp testWorker
Check the file mod_jk.dll in the folder %APACHE_HOME%/modules/. Howevere there are different libraries for different versions of Apache Web Aerver and Tomcat.
Edit the file %TOMCAT_HOME%/conf/server.xml
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
Good luck.

Fail to configure Apache web server 2.0.53 as plugin to weblogic server 8.1

Hello,
I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
Domain - mydomain
I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
After making the installation and configuration when I try to test the server plug-in installation I am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can I proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

SSL between WebLogic 10.0 and IIS 6.0 does'nt work

Hi,
I don't understand why the SSL connection between WL10.0 and IIS 6.0 doesn't work. My ini file is below:
WebLogicHost=10.0.162.31
WebLogicPort=7002
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic
PathTrim=/weblogic
Debug=ON
SecureProxy=ON
TrustedCAFile=C:\trustedca.pem
EnforceBasicConstraints=off
RequireSSLHostMatch=false
where 'trustedca.pem' is the pem extracted (and converted) from wlsdemoca contained into DemoTrust.jks and '7002' is my ssl listen port.
I need to set any more parameter??
My wlpsoxy.log for one request is:
================New Request: [crl4/.wlforward] =================
Thu Apr 17 10:27:32 2008 <351612084388524> SSL is not being used
Thu Apr 17 10:27:32 2008 <351612084388524> resolveRequest: wlforward: /crl4/
Thu Apr 17 10:27:32 2008 <351612084388524> URI is /crl4/, len=6
Thu Apr 17 10:27:32 2008 <351612084388524> Request URI = [crl4/]
Thu Apr 17 10:27:32 2008 <351612084388524> attempt #0 out of a max of 10
Thu Apr 17 10:27:32 2008 <351612084388524> Trying a pooled connection for '10.0.162.31/7001/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> getPooledConn: No more connections in the pool for Host[10.0.162.31] Port[7001] SecurePort[7001]
Thu Apr 17 10:27:32 2008 <351612084388524> general list: trying connect to '10.0.162.31'/7001/7001 at line 1239 for '/crl4/'
Thu Apr 17 10:27:32 2008 <351612084388524> INFO: New NON-SSL URL
Thu Apr 17 10:27:32 2008 <351612084388524> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Apr 17 10:27:32 2008 <351612084388524> EINPROGRESS in connect() - selecting
Thu Apr 17 10:27:32 2008 <351612084388524> Local Port of the socket is 1476
Thu Apr 17 10:27:32 2008 <351612084388524> Remote Host 10.0.162.31 Remote Port 7001
Thu Apr 17 10:27:32 2008 <351612084388524> general list: created a new connection to '10.0.162.31'/7001 for '/crl4/', Local port: 1476
Thu Apr 17 10:27:32 2008 <351612084388524> WLS info in sendRequest: 10.0.162.31:7001 recycled? 0
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> URL::parseHeaders: StatusLine set to [200 OK]
Thu Apr 17 10:27:32 2008 <351612084388524> parsed all headers OK
Thu Apr 17 10:27:32 2008 <351612084388524> sendResponse() : uref->getStatus() = '200'
Thu Apr 17 10:27:32 2008 <351612084388524> Going to send headers to the client. Status :200 OK
Thu Apr 17 10:27:32 2008 <351612084388524> Content Length = 264
Thu Apr 17 10:27:32 2008 <351612084388524> canRecycle: conn=1 status=200 isKA=1 clen=264 isCTE=0
Thu Apr 17 10:27:32 2008 <351612084388524> closeConn: pooling for '10.0.162.31/7001'
Thu Apr 17 10:27:32 2008 <351612084388524> request [crl4/] processed successfully ..................
Thu Apr 17 10:27:57 2008 <351612084387971> timed out 1 connections, idle for (at least) 25 secs
Any idea that help me?

I had a look into the xlclient.cmd file and went to the JAVA directory which is being used. And did a search for the "cacerts" and found out that there is a file named cacerts in the JAVA_HOME/jre/lib/security folder over there.
But how does that relate to the problem of running the keytool command successfully at the right place (OIM_DC_HOME) ?
Any hints Kevin....
Thanks,
- oidm.

Apache Web Server Connection Limitations

Hello,
Does anyone know what is the simultaneous connections limitations that the build in web server on Mac OS 10.4 has? I'm assuming if I would use OS X server there wouldn't be any? Thanks for any responses.
G5 Quad / PowerBook G4 17' 1.67ghz Mac OS X (10.4.6)

So the build in Web Server that comes with the retail version of Tiger doesn't limit the amount of connections? I think I read in another posting that it was 10.
By default the apache config show 150. AFAIK the 10 limit is to afp connections not web connections.
It is easy enough to test turn on web sharing and ask 11 of your friends to connect to it.

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

Does Weblogic 8.1 use Apache web service libraries

Does Weblogic 8.1 use Apache web service libraries ? I've been pressured to include the apache web service libraries, but have been resistant. I was later told by those wanting me to include the apache libraries that weblogic uses the apache libraries, but I have not found any evidence of it.
Can some confirm or deny this?
Thanks,
Eddie

Hosting an Apache web service inside WLS is basically deploying the Apache service as a webapp in WLS. And in the webapp's WEB-INF\lib folder you would have the Apache libraries.
Regards
Shridhar

Configure/installing apache web server (1.3.26) plug in for weblogic server 6.1

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

hi,
can any body know the exact steps to configure the apache web server which can proxy requests to weblogic server 6.1?
thanks in advance.

Install Apach web server and Tomcat

Is it possible to install Apach web server and Tomcat into Oracle Application Server?
If possible, which way is the best? People said that I would better install Apach web server and Tomcat in Redhat.
If you know the answer, would you mind give me the answer or document link?
Thanks

Tomcat is just a servlet engine. Oracle Application Server already includes a servlet engine. Apache is a default component too.

Integrating Apache Web Server and Tomcat

Hi,
how do i integrate Apache Web Server (version 2.0) with Tomcat 5, on 2 different machines physically?
I have managed to integrate them on the same machine. Now, I need to separate the 2 into 2 different servers.
Please help.

This is a forum for Sun's Java Application Server.
Sun's AS is built on top of Tomcat and it's free in production (Platform Edition). The Standard Edition provides integration with an Apache HTTP server via a plugin.
http://wwws.sun.com/software/products/appsrvr/home_appsrvr.htm
For Tomcat, try http://jakarta.apache.org/tomcat/index.html
-Alexis

The tab is bad with apache web server and tomcat

the tab not run with apache web server + tomcat.
It is very bad..

Fijate que solo he estado experimentando con JSC, no he tenido oportunidad de poner nada en producci�n usando la combinaci�n Apache Web Server y Tomcat JSP container y no cuento en �ste momento con �sta configuraci�n para probar.
Nosotros (en donde trabajo) usamos IBM Web Server (basado en Apache Web Server 2), IBM Websphere 6 y las aplicaciones JSF en producci�n est�n hechas con Rational Web Developer.
Ahora he estado muy ocupado con un proyecto urgente, si tengo alg�n tiempo libre la semana entrante tratar� de probar tu combinaci�n (no te prometo nada) pero para ello necesito que me digas las versiones que est�s usando de Apache Web Server y de Tomcat, como est�s enlazando entre ambos con un m�dulo o con ProxyPass y mejor si me mandas el httpd.conf.
Saludos.

Fail to configure Apache web server 2.0.53 as plugin to weblogicserver 8.1

Hello,
I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
Domain - mydomain
I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
After making the installation and configuration when I try to test the server plug-in installation I am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can I proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

Unable to access Workspace through Apache web server

Hi,
I have configured Hyperion 9.3.1. products in windows.
I am getting the following error message when trying to access Workspace through Apache web server(port 19000). But, able to access through Weblogic Application server(port 45000).
please assist me in resolving this issue.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.0.63 (Win32) mod_jk/1.2.8 Server at nasbydapp04 Port 19000
Thanks,
Siva

I re-configured the BIPlus components and even now, i am unable to access workspace through Apache web server.
But now, i am getting a different error
Error:
HTTP 404 - File not found
Internet Explorer
Can anyone help me in resolving this issue.
I have updated httpd.conf and HYSL-Weblogic.conf file in Apache server.

Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001.
I’m having trouble running the Apache and ColdFusion services after connecting the two with wsconfig. I’ve tried replacing the 64-bit mod_jrun22.so with the 32-bit equivalent and the Apache service will then start, but the ColdFusion services error when loading the jvm.dll.
Anyone familiar with this?
Apache Web Server 2.2.22
ColdFusion 9
Thanks.

Looking into the same issue myself. Can you elaborate on this? Which version of the JVM did you upgrade to and did you configure it in the CF Admin to use that jvm?
Using the web connector, I get an error message that the mod_jrun22.so is not a valid win32 application.
Thanks

SSL connectivity - Weblogic 8.1 and Apache web server 2.0

Similar Messages

Maybe you are looking for