Apache Web Server Connection Limitations

Hello,
Does anyone know what is the simultaneous connections limitations that the build in web server on Mac OS 10.4 has? I'm assuming if I would use OS X server there wouldn't be any? Thanks for any responses.
G5 Quad / PowerBook G4 17' 1.67ghz Mac OS X (10.4.6)

So the build in Web Server that comes with the retail version of Tiger doesn't limit the amount of connections? I think I read in another posting that it was 10.
By default the apache config show 150. AFAIK the 10 limit is to afp connections not web connections.
It is easy enough to test turn on web sharing and ask 11 of your friends to connect to it.

Similar Messages

Is the Apache web server feature limited without OS X Server edition?

I couldn't really find a post that answers my question so here it is...
I want to use the built-in Apache web server (a.k.a "Web Sharing") in OSX 10.4, I was just wondering if I am limited on the amount of simultaneous connections/requests? I know only a limited amount (like 5) can connect to my system over a network, unless I install Mac OSX Server. Is the Apache Server stuck under these same restrictions? I'd rather run it from my Mac than have to make a separate linux box for the site (and I don't want to have to fork out $1,000 for OSX Server, lol). I am running Mac OS 10.4.9. If someone could tell me if they know anything regarding this, I'd appreciate it. Thank you

There are differences between the Apache installation in Mac OS X client and Mac OS X Server, but if you're likely to encounter them you should be running Server anyway.
Most of the changes relate to additional apache modules that are installed (which you could add to client if you're up to it) and performance tuning.
The latter is likely to be something you can tweak to cover your needs.
Apache will spawn a new process for each active connection, with an upper limit set to prevent it running away. The limit is higher in Mac OS X Server, but you can increase the default in Mac OS X client to better suit your needs.
Edit the file /etc/httpd/httpd.conf and look for the line:
<pre class=command>MaxClients 50</pre>
(note, your number may be different). You can change the number to any reasonable figure - but don't set it much higher than you actually expect to need.

SSL connectivity - Weblogic 8.1 and Apache web server 2.0

I'm using a Apache web server 2.0.64 as a front end web server for Weblogic server v8.1 sp6. I have managed setup the connection between both server and now i want to configure the SSL connection Apache web server. However i have face some problems with the SSL connection and i can't figure out the problems. I'm using the ssl.conf* to do the SSL connection. Here are the changes i did on my ssl.conf:
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#<IfDefine SSL>
Listen 443
SSLPassPhraseDialog builtin
SSLSessionCache dbm:logs/ssl_scache
SSLSessionCacheTimeout 300
<VirtualHost default:443>
DocumentRoot "C:/Program Files/Apache Group/apache2/htdocs"
ServerName 10.122.50.218:443
ServerAdmin [email protected]
ErrorLog logs/ssl_log TransferLog logs/access_log
SSLEngine on
SSLCertificateFile conf/ssl/server.crt
SSLCertificateKeyFile conf/ssl/server.key
</VirtualHost>
#</IfDefine>
When i testing the application, it comes out :
NOT Found
The requested URL /secureWebAuth/ was not found on this server.
Apache/2.0.64 (Win32) mod_ssl/2.0.64 OpenSSL/0.9.8o Server at 10.122.50.218 Port 443
What should i do in order to solve this problem? Thanks for your help!!!

I'm using a Apache web server 2.0.64 as a front end web server for Weblogic server v8.1 sp6. I have managed setup the connection between both server and now i want to configure the SSL connection Apache web server. However i have face some problems with the SSL connection and i can't figure out the problems. I'm using the ssl.conf* to do the SSL connection. Here are the changes i did on my ssl.conf:
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#<IfDefine SSL>
Listen 443
SSLPassPhraseDialog builtin
SSLSessionCache dbm:logs/ssl_scache
SSLSessionCacheTimeout 300
<VirtualHost default:443>
DocumentRoot "C:/Program Files/Apache Group/apache2/htdocs"
ServerName 10.122.50.218:443
ServerAdmin [email protected]
ErrorLog logs/ssl_log TransferLog logs/access_log
SSLEngine on
SSLCertificateFile conf/ssl/server.crt
SSLCertificateKeyFile conf/ssl/server.key
</VirtualHost>
#</IfDefine>
When i testing the application, it comes out :
NOT Found
The requested URL /secureWebAuth/ was not found on this server.
Apache/2.0.64 (Win32) mod_ssl/2.0.64 OpenSSL/0.9.8o Server at 10.122.50.218 Port 443
What should i do in order to solve this problem? Thanks for your help!!!

Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001.
I’m having trouble running the Apache and ColdFusion services after connecting the two with wsconfig. I’ve tried replacing the 64-bit mod_jrun22.so with the 32-bit equivalent and the Apache service will then start, but the ColdFusion services error when loading the jvm.dll.
Anyone familiar with this?
Apache Web Server 2.2.22
ColdFusion 9
Thanks.

Looking into the same issue myself. Can you elaborate on this? Which version of the JVM did you upgrade to and did you configure it in the CF Admin to use that jvm?
Using the web connector, I get an error message that the mod_jrun22.so is not a valid win32 application.
Thanks

How do I get Apache web server working ...

How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8?
When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do have Web Sharing on in System Preferences on that machine. But the browser does nothing whatever for that URL ...
On my other computer, an iMac running Leopard 10.5.8, when I enter 'http://localhost/~username/' I see the default "Your Website Here" page. That same default page is in fact the index.html file I expect to see on the MacBook Pro. But it isn't getting invoked for some reason. Nothing is happening ...
When on the iMac I try 'http://10.0.1.18/~username/' (10.0.1.18 is the local IP address I see under 'Web Sharing: On' on the MacBook) I get "Unable to connect: Firefox can't establish a connection to the server at 10.0.1.18."
When on the MacBook I try 'http://10.0.1.5/~username/' (10.0.1.5 is the local IP address I see under 'Web Sharing: On' on the MacBook) I see the default "Your Website Here" page.
It is the same on my iPhone: Using the same local IP addresses and usernames, Safari can see the index.html page on my iMac but not on my MacBook.
It looks as if Apache is not working on the MacBook, while on the iMac it works fine.
On the MacBook I can see (after I use 'defaults write com.apple.finder AppleShowAllFiles TRUE' in Terminal) a /private/etc/apache2/ directory with what look to be(?) the usual contents. So it looks like Apache is duly installed, as far as I can tell.
On the MacBook I don't see a file at /private/var/log/apache2/error_log, which is the location for 'ErrorLog' given in the httpd.conf file.
That about exhausts my understanding of how to get a handle on my problem.
Any advice or suggestions from those who have more expertise with Apache will be much appreciated ...

Okai, so we are getting somewhere, but not quit there yet :-)
I opened the Kenneth.conf file using the command: vi Kenneth.conf
This is what it said:
<Directory "/Users/Kenneth/Sites/">
Options Indexes Multiviews
AllowOverride AuthConfig Limit
Order allow,deny
Allow from all
</Directory>
"Kenneth.conf" [readonly] 6L, 139C
I therefore changed the AllowOverride from AuthConfig Limit to None, which was the only difference from what you posted above. Something did change, when I tried to open XAMPP it prompted me a password, but Apache still wont start :-/

Integrating tomcat 5.0.28 with apache web server 2.2

hi all
i tried a lot on net but could not get the steps for
connctivity between tomcat 5.0.28 with apache web server 2.2.
any one pzl do help me in finding the solution
pzl do tel me the step by step process for this connectivity
sus

hi :-)
you need jk modules ;-)
i havent try the integrating the version of apache web
and tomcat you specify but you can refer to the links below :-)
gudluck :-)
http://www.serverwatch.com/tutorials/article.php/2203891
http://www.onjava.com/lpt/a/2826
http://raibledesigns.com/tomcat/
regards,

Fail to configure Apache web server 2.0.53 as plugin to weblogic server 8.1

Hello,
I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
Domain - mydomain
I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
After making the installation and configuration when I try to test the server plug-in installation I am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can I proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

Fail to configure Apache web server 2.0.53 as plugin to weblogicserver 8.1

Hello,
I have installed web logic server 8.1 with sp2 on windows XP system. I have configured a domain with configuration wizard
with these settings -
server name "myServer"
port No - 7001
Domain - mydomain
I have installed apache web server 2.0.53 on windows XP. I have followed the steps to Installing and Configuring the Apache HTTP Server Plug-In with web logic server.
After making the installation and configuration when I try to test the server plug-in installation I am getting this error
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds.
Please let me know what exactly is going wrong and throw some light how can I proceed.
Thanks,
Nanda kishore

I recd a similar message.
This message indicates that the configuration setting for the Apache plugin are proper.
You probably need to check if our Weblogic server has been restarted properly.
thanks

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

Apache Web Server Listener is not running

Hi,
when starting E_BUSINESS issuing this
adstrtal.sh apps/apps
, I have this error message :
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
What might be the problem ? How can I launch Apache Web Server Listener to see why it can not start and where to see it's log file ?
Many thanks

hsawwan,
I stopped all services, and killed process that were using port 8103. Then restarted all. In jserv.log we have
[09/11/2007 15:36:27:798 CET] Host os02ebsx.ourdomain.net not found and not allowed to connect
[09/11/2007 15:37:29:146 CET] Repository /Data/oracle/d03/prdacomn/java/apps.zip doesn't exist!
[09/11/2007 15:37:29:178 CET] oracle.apps.icx.common.InitSystemProperties: init
[09/11/2007 15:37:29:233 CET] oracle.apps.fnd.tcf.SocketServer: init
[09/11/2007 15:37:29:247 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: init
[09/11/2007 15:37:30:005 CET] weboamLocal/oracle.apps.fnd.oam.servlet.ui.OAMServlet: Sucessfully initialize oaosu.OAMServlet
[09/11/2007 15:37:30:156 CET] oracle.apps.mwa.wap.engine.WapServlet: init
[09/11/2007 15:37:30:156 CET] oracle.apps.mwa = /Data/oracle/d03/prdaappl/mwa/11.5.0
[09/11/2007 15:37:33:271 CET] Fatal error in parsing device registration file. See system log file for de-tails.
but in Context.xml file we do not have os02ebsx.ourdomain.net. Where does java server pick up this host ?
Thanks and regards.

Apache Web Server & Tomcat Join

Hai all
i learnto Tomcat is not a web server where u can use it as Web and Aplication server. we need to use Apache Web server and connect it to Tomcat this is the only good way of using tomcat as web server.
i have new version of Apache Web Server and Tomcan can anybody give me the steps to connect both into one ?
please help me
thankyou
Rajesh

It depends on the complexity of your application, you may not need Apache server. Tomcat by itself should do the job. And yes, Tomcat is a web server.
Hope this helps.

Unable to access Workspace through Apache web server

Hi,
I have configured Hyperion 9.3.1. products in windows.
I am getting the following error message when trying to access Workspace through Apache web server(port 19000). But, able to access through Weblogic Application server(port 45000).
please assist me in resolving this issue.
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
Apache/2.0.63 (Win32) mod_jk/1.2.8 Server at nasbydapp04 Port 19000
Thanks,
Siva

I re-configured the BIPlus components and even now, i am unable to access workspace through Apache web server.
But now, i am getting a different error
Error:
HTTP 404 - File not found
Internet Explorer
Can anyone help me in resolving this issue.
I have updated httpd.conf and HYSL-Weblogic.conf file in Apache server.

How to save uploaded image file to Apache Web Server from Tomcat

Hi guys,
Perhaps this is not an appropriate topic to ask under this forum but I really don't know where should I post my question. Hope you understand.
Ok, I need to know if my web application is running in Tomcat5 and user uploading some image file where I need to save these image files to the other server, which is running Apache Web Server. Should I ftp to there or other better method ?
Anyone got a better idea on doing this kind of process pls advice. Many Thanks !
regards,
Mark

if your Apache server is running in the same computer and if your servlet have write access to the folder in apache under which you want to save the file you can just write the file there but you will have to address concurrency issues.
Otherwise you will have to do ftp but since apache does not have abuilt in frp server you will need a seperate FTP server for this

Apache Web Server for Content Server 6.4

Hi!
I have installed the SAP Content Server 6.4 with a SAP DB instance (MaxDB 7.6.0) on SuSE Linux Enterprise Server 9 (32bit-Version). I've also installed Apache Web Server 2.0.49 via yast.
When i am trying to access the server through csadmin in the Knowledge Warehouse, i get the following error message:
Error in HTTP-Access: IF_HTTP_CLIENT->RECEIVE 1
ICM_HTTP_CONNECTION_FAILED
The Content Server's database is online and the Apache is running, but when i prompt the command
apache2ctl fullstatus (or apache2ctl status, respectively)
it says:
Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
localhost
The linux-version is 2.6.5-7.244-smp
SuSE-version is SLES 9 (i586), Patchlevel 3
I am pretty new to Linux and Apache, so i really do appreciate any kind of help!
Thanks a lot!
best regards, TW

Hi. Did you figure this out ? I have the same error and the only difference is I am using apache on Solaris. I found the file /sapcs/apache/2.0.59/logs/error_log. From some trial and error, it looks like in the home dir of apache is in /sapcs/apache/2.0.59/htdocs but in csadmin the field 'http script' doesn't like relative addressing. ( I put in ../modules/mod_sapcs.so ) and it still didn't like it. I ended up creating a softlink in htdocs that point back to the modules directory. Now I get other issues ( can't create the content repository from csadmin - get http: 405 method not allowed ).

How to Configure Apache Web Server with Tomcat web container in Linux

Hi all,
I am working on Tomcat web server 5.0.19 on Linux AS 3.0., ( my Control Server)
I need map my tomcat to Apache Web Server (httpd) in another system
(web server).
I dont have jk2_ or jk_mod .so files to use in my tomcat/conf directory to make them available for httpd.conf files of Apache Web server.
I have only jk2.properties file in my conf.,
Please tell me how to go about it
my mail id [email protected]
Thank You
Subramanyam.V
Hyderabad
India

The simple answer is to download a web server that has a web container already integrated on it, so all that painful configuration work is avoided.
You can use the mature SJS Web Server 6.1 SP5 at
http://www.sun.com/webserver
Or you can try a preview of the upcoming version at
http://www.sun.com/download/products.xml?id=446518d5
You will get better performance and security, with easy of use, at about the same price ;)

Apache Web Server Connection Limitations

Similar Messages

Maybe you are looking for