SSO authtication doesnt show "invalid password" message

We have 2 SSO servers
In once, if the user enters invalid password, then same page comes up with message "invalid username/password"
This is the expected behaviour
In other, same page comes up, but without any message
This is misleading and the user keeps thinking why he is not able to proceed without realizing that the password was incorrect
I am sure this is related to some settings
But dont know what needs to be changed
Or what shall I compare bteween the server where its working fine as against the server, where it doesnt show up the right message
Please suggest

So, I assume then that your login page is ok. You tried it and it was there, but you are not being redirected to this page. Can you try re-registering your site using the SSO registration tool. For example:
e.g. for unix:
$ORACLE_HOME/sso/bin/ssoreg.sh \
-site_name application.oracle.com \
-host ukp16016.uk.oracle.com -port 1521 -sid iasdb \
-success_url http://application.oracle.com:7779/osso_login_success \
-cancel_url http://application.oracle.com:7779 \
-logout_url http://application.oracle.com:7779/osso_logout_success \
-home_url http://application.oracle.com:7779 \
-config_mod_osso TRUE \
-oracle_home_path $ORACLE_HOME \
-u root \
-sso_server_version v1.2 \
-verbose TRUE
e.g. for Windows (with no line breaks):
%ORACLE_HOME%\sso\bin\ssoreg.bat
-site_name application.oracle.com
-host ukp16016.uk.oracle.com -port 1521 -sid iasdb
-success_url http://application.oracle.com:7779/osso_login_success
-cancel_url http://application.oracle.com:7779
-logout_url http://application.oracle.com:7779/osso_logout_success
-home_url http://applicationk.oracle.com:7779
-config_mod_osso TRUE
-oracle_home_path %ORACLE_HOME%
-u system
-sso_server_version v1.2
-verbose TRUE
2. If this OHS should protect any URLs in addition to /oiddas edit the mod_osso.conf file at this point.
3. Then update the DCM repository for the appropriate Apache server:
Unix:
$ORACLE_HOME/dcm/bin/dcmctl updateconfig -ct OHS -v
Windows:
%ORACLE_HOME%\dcm\bin\dcmctl updateconfig -ct OHS -v
4. Now restart the instance:
Unix:
$ORACLE_HOME/dcm/bin/dcmctl stop -v
$ORACLE_HOME/dcm/bin/dcmctl start -v
Windows:
%ORACLE_HOME%\dcm\bin\dcmctl stop -v
%ORACLE_HOME%\dcm\bin\dcmctl start -v
If you have metalink access, this is covered in Note:249408.1

Similar Messages

  • Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

    Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

    Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

  • "Invalid Password" Message from Network

    My 1 year old Time Capsule has been working perfectly since I bought it. Now all of a sudden I don't get logged in automatically to my network. In addition, I can't connect to my network manually; when I try it asks for my password (that Airport Utility stored in my Keychain) and when I type it in I get a "Invalid Password" message. I have tried plugging in to the TC with an Ethernet cable & resetting/changing the password to something new, turning off the security, pressing the reset button for 1 second & 5 seconds, resetting the TC to factory settings & setting up again but to no avail. I have removed & re-added my network from my preferred lists, deleted & redone my Keychains, begged, wheedled and threatened it with a list of dire fates but all with no joy. I can see my network there, with the little lock image, but cannot get in. Airport Utility won't even see my TC unless I'm physically plugged in with an ethernet cable.
    Additional info: Maybe no coincidence, but three days ago I got a 4G wireless internet modem and plugged it into the TC. Until then I'd had no internet at home and had the TC happily ignoring this. When I got the modem and plugged it in, Airport Utility asked me to change it to 'Bridge Mode' (that I've tried undoing) and then I was wirelessly online. The modem ran perfectly through the TC for the 1st couple of days and I could still print wirelessly through my attached printer. All was well in the kingdom, when all of a sudden everything went pear-shaped yesterday and no matter what I try I cannot make things whole again.
    Can anyone help please????
    Alec

    Okay, the problem's changed. I turned on my old 12" MBP and found that it was still happily chatting away with the network, printing etc. I compared the two System Profilers & found that the IPv4 had gone to PPP (Not sure what that means or how I changed it) so went back & changed it to DHCP. All of a sudden I was back to being on my network & I was able to back-up with Time Machine. Then I replugged in the 4G modem, the light went amber and when I went to Airport Utility it told me that it was reporting a problem. It said something about double NAT (???) and suggested I went into 'bridge mode', which I duly did. After the TC rebooted itself I was back on the network, so far so good...
    Now, however, I can't back-up with TM. It gives me a 'backup disk not available' message. When I try to look at things in Airport Utility, it can see my TC but just hangs on 'Reading the Time Capsule configuration' before giving me a (-6753) 'Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again' message.
    Is it something to do with the 'Bridge Mode' thingy? Does it mean that I can either have my wireless backup, or my internet but not both?
    PS Oh, and I can't print over the network either, and when I try to print over on my old MBP it says 'Device in use, waiting...'
    PPS Aaargh, and my old MBP can talk to the TC via Airport Utility. Does this mean it's a problem with my new MBP, or is it a Snow Leopard thing?

  • Conversation doesnt show the latest message but an old one.

    Each time i click on a conversation in Mail, it doesnt show the latest message, but on old one. Changing the settings to 'place latest message on top' (sorry don't know exactly how they have translated this, I am running Dutch version) does not fix this.
    If you change the settings to 'place latest message on top'. It does place the latest message on top, but it shows an old one. So each time i click on a conversation, i have to scroll to the top to see the latest message. This is very irritating. I already answered several old messages. People think i am getting ********...
    I am using Mail in classic view! Changing it to the new view, doesnt fix it either.

    Hey Olivia,
    If you are having an issue with your iPhone only showing the most recent message of a conversation in the Messages application, and you have already tried restarting and resetting the iPhone, the next thing to try would be to back up any data on the iPhone, erase it and set it up as a new device. See this article for directions -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Receive 'invalid password' message.

    Receive 'invalid password' message when attempting to log in to ePrint so I enter my email address and attempt to reset my password since I don't know what my password is.  Message says I need to use the email address associated with my account.  I only have 1 email address.  I attempt to create a new account but message says the email address is already associated with an account.  I cannot log in, I cannot get a new password.  I'm stuck!

    If you are having issues logging into ePrintCenter, go to http://www.snapfish.com/ and click on log in and then select "Forgot your Password?" and enter your email address. If it recognizes it, it will send a temporary password to your email address and a link to change it. Go ahead and change that password and go back to http://www.eprintcenter.com/ and try to log in with your email address and password. You should be able to get in now. Let me know if that works for you, if not, we can try something else. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • [Problem] Repeated showing the Password Message of my Apple ID at AppStore.

    Hi every body!
    I've a problem with my MacBook Pro, that is an error with downloading applications from AppStore. I want to sign in to my Apple ID then the message of Password requirement repeating show to me! so I can't download any thing!
    After that I found updates on AppStore of iPhoto,GrangeBand…etc which has 370mb. The downloading completed BUT when the installation operation will be begin, that's an interrupt has been occurred then "Error to install updates" Message has been showed.
    I search for this problem then I find some resources tell me "Download those updates on Manual way! Now I downloading those with 750mb! But the problem with the Password message not solved yet! I want a solution for this crazy problem.
    With my thanks, Moda..

    Livin Easy wrote:
    At this point I could tell you what he instructed, but then it would provide what Apple Support Basics should offer immediately when a question like mine is posed online, from any browser anywhere in the world.
    You mean like this? -
    Deauthorize your computer using iTunes - Apple Support
    which says
    'You should deauthorize all computers if:
    Your computer doesn't work anymore.
    You sold or gave away a computer and didn't deauthorize it first.'
    and gives instructions on doing this.

  • ATV2 wifi invalid password message

    Hi I have an ATV 2 that I bought a couple months ago.  At the time I was using Qwest DSL with a Linksys wrt400 dual band wireless router and the ATV worked fine despite the poor signal from Qwest.  Recently I switched to comcast and now when I attempt to connect the ATV to the same Linksys router I receive a message saying invalid password.  I've tried connecting after disabling the router security, changing the passwords, changing the router channels, and did a reset as well.  We have an imac, several pc's, an ipad, itouches, iphones, and a blackberry that all connect with no problem but no success with the ATV.  What am I missing?

    Invalid password for what?

  • Getting Invalid password message while running catalog utility

    Hi,
    I am trying to index the modifyTimestamp attribute using catalog utility in OID.
    I am using the command as :
    ./catalog -connect=orcl -add=TRUE -attribute=modifyTimestamp
    Enter OID password:
    but I am getting Invalid password error when I am entering the super user (cn=orcladmin) password.
    Could you please help me in solving this issue.
    Also can someone help me in knowing how to check what should be the correct value of connect_string.
    I am running this command on Solaris.
    Thanks in advance!!
    -Nitin

    Rohit,
    The fix to this is fairly straightforward.
    You have input an incorrect path for the -infile parameter when calling cryptotools.
    You entered , -infile OracleBIData_HOME/web/config/credentialstore.xml
    when it should be, -infile C:\OracleBI\web\config\credentialstore.xml , depending on the absolute physical path to the credentialstore.xml file.
    It looks like you were attempting to use either a Nix (unix/linux) path with the forward slashes or you where trying to use a environment variable for "OracleBIData_Home".  I can see from the c:\ that you are on a Windows machine so the Nix path won't work. Also if you are attempting to use an environment variable that you have confirmed is indeed set, then you need to use %OracleBIData_HOME% in the command prompt which would look like %OracleBIData_HOME%\web\config\credentialstore.xml
    So to answer your question your command should appear as below if I have accessed your path to the OracleBIData home correctly, you may need to change it based on your installation,
    C:\OracleBI\web\bin>cryptotools credstore -add -infile C:\OracleBIData\web\config\credentialstore.xml
    Just be mindful of your paths and your backslashes vs. forward slashes.
    Please mark this as the correct answer to award points if it is or if you read it and it helped you.
    Cheers,
    Christian

  • Invalid Password message on BB bold 9700

    I downloaded a new software onto my computer and couldn't remember my password, so I reset my pasword with BB and was able to login on the Blackberry Web site. The passord was correct. But when I tried to connect my phone to the computer to download the pictures, the password was not working and the message said that the software cennot communicate with my phone. I ended up using all my 10 chances to login and the message came up that if I try one more time, whole data on my phone will be delated. What do I do?
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    The password prompted for by the Desktop Software and the password you assigned to lock your BB are the same password, and have nothing at all to do with any password you can change online. They are not your BBID credentials nor any other thing...solely the device lock password, which exists only on the device, and is required for you to enter into the Desktop Software.
    First thing...if you know your device lock password and how to enter it on the device, then disconnect from your PC and unlock your BB device normally...this will reset the password attempt counter and prevent the device wipe.
    What I suspect is that you've got a mixture of different characters in your device password, and perhaps have not noticed how you must enter those on the BB keyboard. For instance, if your password is
    ab123
    and you enter
    a > b > ALT > 1 > 2 > 3
    the actual result will be
    ab1er
    You must enter
    a > b > ALT > 1 > ALT > 2 > ALT > 3
    in order to wind up with ab123. So, in this example, while on the BB keyboard you think you are typing ab123, you are actually typing ab1er.
    On your BB, when you type your password, you should get just a moment where each character is shown in the clear before it changes to an *. Watch closely the next time and you may see a surprising result. It will be those exact characters that you must type on your PC keyboard as that's actually your password.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Javascript gives invalid password message

    I have been trying to create an account with an employer and I can not do it from my computer. The employer tested their site and it is fine. I had friends create accounts from their pc with no problem. After entering my password i get a JavaScript error that reads. "Please enter a valid password. Delete all the invalid characters, including spaces, from your password." I assure you I am not using any invalid characters and I am following the guidelines of their website. Is this a Javascript problem and how can I fix it? Frustrated! Thanks. -J

    You might try posting the link here for others to try it out.
    What browsers were your PC-using friends using? What browsers have you tried? The site author might have coded it in such as way that it works for Internet Explorer but not for Safari. Recently in my web development class, I had a problem where my site worked in Safari, but not in IE. Turned out to be a little quirk where IE is a little more picky than other browsers. This might be a similar thing, but the other way around.

  • Invalid Password even though it's valid

    Hi,
    Everybody, I've recently deployed an application in Websphere and HTTPServer and have Oracle on the DB back-end. I've followed deployment instructions and assigned libraries to ear and war files of an application, my EJB's seems to be targeted right path and JDBC connection Tests sucessfully. Before deploying application for Websphere I've configured my config files and xml files to meet right path, and then installed an instance from ear file which got uploaded to Websphere. My question is I'm getting to the login page from HTTPServer and unable to login with existing user in a DB for an application it throws me an "INVALID PASSWORD" message, once clicking on Forgot Password Link it throws me an Java exception for Authorizer, is it an application error message or configurations of an application were setup incorrently with a DB? There's an instance to it, I've had that application up and running with several internal bugs to it which were allocated in the middle of a user-session, but @ least at some point I was able to successfully login, now I'm not even getting threw after redeployment...Once more thing, my application server doesn't show any visuals that our application has on the login page whereas HTTPServer has all of them, how would I got about it, I've copied and pasted my webroot folder to a default application path directory... If anybody can get back to me with this problem I would greatly appreciate it.
    Thank you,
    Tim

    I've recently deployed an application in Websphere and HTTPServer and have Oracle on the DB back-end. Tim, apparently your login problem happens inside the Websphere. You will have a better chance to ask this question in IBM's forums.

  • Cannot Connect to Home Network - Invalid Password

    I moved to a new home which required a new password. I can connect my android devices to the passport wireless device just fine. I attempted to connect the passport device to my home network and I immediately receive the message "Invalid Password" and a split second later this message pops up " Attention, your request is currently being processed". I am entering in the correct password. I tried entering in an incorrect password and it shows the image that its attempting to connect and it takes about 15 seconds for me to get the "invalid password" message. Will I have to factory reset my device? I want to avoid this at all costs since I did this before and ended up needing to get a replacement passport device. Please help.

    Okay, try these steps. Pictures would help, but I don't have time. Connect your Android device directly to the MPW via WiFi.Tap the menu (three bars) in the top left corner.Tap settings.Tap the name of your MPW just below the "My Passport Wireless" heading.Scroll down to the "Wi-Fi" section, and tap that. What you see here may vary from what I do a bit, as my MPW is connected to my home WiFi network. If you see your home Wi-Fi network name below the heading "Connect to Internet", then;Tap the blue "i" in a circle at the right of the name.Tap the "Forget This Network" item. If you don't get the blue "i" in a circle, which you probably wont, then I think you need to do need to do a manual System Only Reset, as per page 47 of the manual. What I'm thinking is that when you moved house, you kept the same SSID (wireless network name) on your wireless router, but changed the password. Is that correct? If so, the problem is that the MPW remembers your old network, and the old password, and keeps trying to connect using that information. Hence the above instructions to "forget" that network, at which time you can start again in setting up the MPW connection to your home wireless network. An alternative would be to change the wireless password on your wireless router back to what it was when the MPW was still able to connect, back at your old house. Still another alternative would be to change the SSID on your wireless router, and set up the MPW to connect to this "new" wireless network. Both those alternatives require a bit of work on your home wireless network, and require changes on all devices which use the network; either just a password change back to the old one, or both a password and network name (SSID) change. Both are more work than resetting the MPW. If you do reset the MPW, don't forget to also update it to the latest firmware, as I believe that a reset puts the original, as delivered firmware on to the MPW. If none of the above helps, I think you need to raise a support ticket with WD.

  • Invalid password

    Hi
    I have installed the WLS6.0 (the evaluation version) on my computer (whish has windows 2000 installed on it).
    I started the default server.
    Than, I started the default console.
    Althogh I installed the server without a required password, I was still required to write a password in.
    I typed in "system", but I got an "invalid password message" again.
    Could anyone help me?
    Ran

    You need to input the user name system and the password that you set during
    installation to access the console.
    Michael Girdley
    BEA Systems Inc
    "ran" <[email protected]> wrote in message
    news:[email protected]..
    >
    Hi
    I have installed the WLS6.0 (the evaluation version) on my computer (whishhas windows 2000 installed on it).
    >
    I started the default server.
    Than, I started the default console.
    Althogh I installed the server without a required password, I was stillrequired to write a password in.
    >
    I typed in "system", but I got an "invalid password message" again.
    Could anyone help me?
    Ran

  • "INVALID PASSWORD" trying to connect with a MacBook...help!

    I've got a WRH54G wireless router...has one pc connected via ethernet and two Dell PC's connected wireless...all are working fine. I've got a new Apple MacBook, and I am not able to connect to my wireless network with security enabled. MacBook does connect via ethernet. MacBook does connect to my neighbors unsecured network. MacBook does connect to network at the local Whataburger restaurant. MacBook does recognize my network if I broadcast the SSID. When I try to join, I enter the network name, then select security (WPA Personal), then enter password, then click on JOIN. I then receive a INVALID PASSWORD message. Not sure if it matters but my password is like this Xxxxxxxx9( with X = letters. Does anyone know the trick to making the MacBook work with my security enabled Linksys network? Thanks for your help.

    Here is what I ended up doing....all computers were talking as of last night: 1-Obtained the mac address for all 3 wireless computers. 2-Accessed the router, then went to the wireless tab>wireless mac filter. 3-Enabled mac address filtering, then entered the mac addresses of the three computers. 4-Selected the option to only allow these mac addresses to access the router. 5-Turn off the wireless security. 6-change the wireless security setting on each computer to none. Even with broadcast ssid disabled, all were able to detect and connect to the router. As I think I understand it....to access my router, you'd have to know the hidden (ssid broadcast disabled) network name, but since I am allowing access only to the mac addresses listed, you can't access my network....so this should be pretty secure. I'm a network novice, so if I'm wrong, please correct me (nicely).

  • Invalid username and password message is coming from oracle forms 11g

    Hi,
    Genrally we unlock and reset the password for locked oracle account and then we make password as expiered so that user will get prompt password change while logging into application.But recently we have made our password policy as case senstive.Now user is getting password exipred message and application is prompting to change password window, but even if user is giving correct password invalid username password message is coming (ORA-01017).To overcome this I have tried same case password but no success. I am able to change the password from sql plus
    Please let me any changes need to carried out on application server side.
    database(11.2.0.2.0)
    OAS(10.1.2)

    Hello,
    We hava same problem most of the time, however the reason is mostly users enter password in non-English characters mostly ı for i.
    Regards,

Maybe you are looking for