SSO error "Name or password is incorrect. Please re-enter"

Hi all,
I am trying to achieve SSO between portal and backend using Logon ticket.
Am getting the error "Name or password is incorrect. Please re-enter". I searched in SDN and tried various possibilities that I could have missed out.
I have the same user id in portal and backend.
Also, the parameter ume.configuration.active=TRUE is set.
The portal version am using is EP6.0 SP16.
Please guide me.
Thanks & Regards,
M.Subathra

Hi,
Since you get the message "Name or password is incorrect. Please re-enter" the sap logon ticket reaches the backend system.
Have you added the portal certificate to STRUSTSSO2 transaction in backend?
Do a sm50 trace (security=5) in the backend system and see what the real error is.
Regards
Dagfinn

Similar Messages

STMS, RFC-error,Name or password is incorrect (repeat logon)

hi.
I' ve problem with stsm
i do :
1) import request from development system to test system
2) quit from stms
3) start stms and refresh queues and recive error:"RFC-error,Name or password is incorrect (repeat logon)"
after this, i do "reset user tmsadm" and "generate rfc destination" in test system and all works.
But when i do 1) 2) 3) all repates again .

Hello Denis
I have seen a problem recently relating to the error "Name or password is
inocorrect. Please re-enter." The error can be caused if you are not
using downward compatible passwords. Please check note 807895.
Ensure that the passwords are compatible, try entering the password in
uppercase and see if this helps.
Thanks
Kenny

RFC Error - Name or Password is incorrect(Repeat Logon)

Hi,
I am trying to login to SAP Logon pad with a temporary password i was given and I get this error.
RFC Error - Name or Password is incorrect (Repeat logon).
Can anyone please help me on this.
Thanks
Syed

Hi Syed,
Validity of your temporary password might be over, please check with your administrator and paste the screenshot error and sap logon pad version too if possible.
regards
kartik

Trouble logging to SAP from Excel: Error "Name or password is incorrect"

Hi,
When I am logging to SAP(APO) from Excel using VBA, I am getting error
"Name or password is incorrect" "repeat logon".
I have made my password in CAPITAL letters.
Also I have the authorization S_RFC.
Still I am not able to logon.
If any changes are required in Profile Parameter, let me know.
Is there any setting that I should do in sm59.
What steps should I do, so that I can login to SAP.
Regards,
Vikas

Hi Vikas,
sorry, but i have no other ideas, perhaps any other member of
this forum can help you.
good luck.
Regards, Dieter
Can you show the VBS-Code, i will test it in my System
Regards, Dieter
Message was edited by:
Dieter Gröhn

JCOProxy Error: Name or Password is incorrect

Hi,
We freshly installed NW 2004s and MII 12.0.2. After that we created Communication Data user in SAP and tried to connect XMII with SAP by using SAP JCo action block in workbench. But it is showing Name or Password is incorrect. Please re-enter. Then we changed the user role to Dialog user in SAP. We tried again. But again it showed the same problem. But in SAP we are able to login by using the user.
We clear the cache as mentioned in one reply in this forum like
http://localhost/XMII/JCOProxy?Mode=Reset
But after this also, it is not working. Still it is showing the same error.
We gave all parameters correct but problem not solved.
How to solve this?

Hi Senthil,
We too faced the similar issue, what we did taht we asked the abap guy to overwrite the same credntials in in R/3 side. We also did overwrite the credentials in MII side. Surprisingly it started working.
Go through the similar thread over [Here|Re: JCO Connection in MII 12.1], but it is for MII 12.1
-Suresh

[ERROR]: Name or password is incorrect (repeat logon)

Guys,
In a transaction I use 2 action blocks for testing.
1st action block is a standard 'SAP JCO Interface' -- that one calls BAPI_PROCORD_GET_DETAIL
works A1
2nd action block is a standard 'SAP JCO Start Session' -- that one also calls BAPI_PROCORD_GET_DETAIL but always defaults to the error (msg found in subject header)
Both action blocks share the same 'SAP Server Details'
Server, client, system number, user name, pwd....
Any lead on troubleshooting will be greatly appreciated.
Martin

Martin,
JCo Start Session opens a session. To execute the BAPI, you need a second action block of type SAP JCo Function (Not SAP JCo Interface) which is linked to the Start Session action block. Then at some point you need to use either a JCo Commit or JCo Rollback. The logic is essentially the same as in SQL.
Good luck,
Mike

Error: Name and password incorrect.

hi all
i am doing the file to idoc scenario. everything is success bt in the sxmb_moni i am getting the error as name and password is incorrect please retry. so for which port and which rfc destination it is failed.
anyone can send the details abot the configuration settings of the port, rfc destinations please.
i am trying this scenario since 3 days..
thanks a lot
Vasu

Vasudeva,
Pls do check in SM59 transaction whether you are able to do a remote logon to R/3 system using this RFC destination which you have created.
Make sure that you are using a user id which is having relevant authorizations and make sure that you have entered the user id and password correctly.
Cheers
JK

Logon fail get massage like "Name or password is incorrect(repeat logon)."

I need to use BAPI in my webdynpro application.So I am creating Model for this purpose.
On first screen which is
Screen 1)
"Select"
choose the model type you want to create-------
(.)Import Adaptive Model
Screen 2)
"Import Adaptive RFC Model"
I have given model name and name scpace.
Screen 3)
"SAP Logon Information Screen"
Single Server------
Host Name:xyz
sytem Number:00
User Acount-------
Client:000
Logon Name:pqr
Password:xxxxxx
Language:EN
But when i give this information and click on next it gives me error
Name or password is incorrect(repeat logon).
I check user name and pwd by logging SAP GUI and it is correct.
Can any one please let me know how do I proceed to solve this problem ?
Or is there any way to configure server credential in web dynpro ?
Thanks
Sunil Pawar

Hi,
thess pdfs may help you,
https://www.sdn.sap.com/irj/sdn/nw-wdjava?rid=/library/uuid/a00f7103-6790-2a10-ac9c-fcac7c5b18a3
Accessing ABAP Functions in Web Dynpro
/docs/DOC-8061#15
Regards,
ramesh

SAPJSF Name or password is incorrect (repeat logon) in NW SR3 NWDI deploy

Hi,
I am installing NW7.0 SR3
In step of deploying :
Initial setup of functional unit Development Infrastructure (DI all-in-one)
there is an error :
Name or password is incorrect (repeat logon)
Destination parameters
user : SAPJSF
password : % secure content %
host : localhost
sysnr : $$
client : 001
language : null
I tried to change the password in ume.r3.connection.master.passwd
which is exacting the same in ABAP side
but it doesn't work
Anyone has ides to solve this problems?
Thx.
John

ideally you should not use NWDI as an Add in, it is not a recommended scenario.
For problem shooting this I would look in the Server0 directory for the RFC trace file which should show you what the issue is.
If not I would then log onto the ABAP system with NWDI down, go to SM50 and increate the trace level of all DIA Wp's but only have the Security component ticked... then I would start up the J2EE and after it has failed to connect I would look through the trace files (after turning off tracing) looking for the word sapjsf. That should tell you exactly why it is failing.
hopefully the sysnr below of $$ was just a typo.
Ensure it is client 001 that you have changed the sapjsf password in (a common error)

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

SCOM Linux discovery failed with "The user name or password is incorrect" error

Hi every one .
In our test environment when I want to discover a new linux computer system , discovery process fails with this error message :
Unexpected DiscoveryResult.ErrorData type. Please file bug report.
ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
Task invocation failed with error code 1326. Error message was: The user name or password is incorrect.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents)
But I m sure that this username and password is correct and I can logon to this computer with this credential.
how do I find root cause of this issue ?

I have been enabled logging before doscovery process .
in temp directory :
0: 02/10/15 20:03:22 : Enter SCXNameResolverProbe constructor
0: 02/10/15 20:03:22 : Leave SCXNameResolverProbe constructor
1: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoInit
1: 02/10/15 20:03:22 : XML_INIT_CALL
1: 02/10/15 20:03:22 : Check WSAStartup
1: 02/10/15 20:03:22 : Exit SCXNameResolverProbe::DoInit
2: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoProcess()
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess passed initial arguments checking
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess input: 192.168.7.62
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess - Input is an IP-address
3: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::GetName(): 192.168.7.62
3: 02/10/15 20:03:22 : Resolve IPv4 address to host name
3: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::GetName(): SUSE11
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns name: SUSE11
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns ip: 192.168.7.62
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errorcode: 0
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errortext:
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns xml: <NetworkName>SUSE11</NetworkName><IPAddress>192.168.7.62</IPAddress><StatusCode>0</StatusCode><StatusMessage></StatusMessage>
2: 02/10/15 20:03:22 : Enter initDataHolder
2: 02/10/15 20:03:22 : Enter initDataType
2: 02/10/15 20:03:22 : initDataType initializing output datatype
2: 02/10/15 20:03:22 : Leave initDataType
2: 02/10/15 20:03:22 : Leave initDataHolder
2: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::DoProcess
4: 02/10/15 20:03:22 : Enter SCXNameResolverProbe destructor
4: 02/10/15 20:03:22 : SCXNameResolverProbe destructor - FreeLibrary failed: 0
4: 02/10/15 20:03:22 : Leave SCXNameResolverProbe destructor
with debug viewer I have this message after discovery :
[7448] A management object with display name SUSE11 could not be found.

Error in RFC: Name of password is incorrect

Hi All,
I am using GRC AC 10.1 with SP06 and came across with one issue and so need your help to rectify it.
I have created one cross system groups for all deveopement clients (SAP_DEV_CG) and put all the D-clients for all the landscapes.
While running the risk violations reports on user level, i get to see the violations along with an error: "Risk analysis finished with error. Check log for details". SLG1 reports indicates that there is some issue with the RFC: Name or password is incorrect.
The error is quite clear and self explanatory that there is some issue with the RFC; but my concern is that, as I have put multiple development clients to this group so how would i know for sure that SLG1 indicates the RFC (password/name) issue to exactly what system. It will not be feasible to go and see all the systems one-by-one. I checked the logs in detail, navigated through all the technical information but not really able to see the particular system name where the real issue is there.
Looking forward to your quick and positive response.
Thanks,
Ameet

Hi Colleen,
Thanks for your response and sorry for this delay in responding with your suggestions.
SM21 results are as below, But I don't see any hints on the connector which is causing the error with RFC:
Exeuting the jobs for each connectors or checking for each connectors one-by-one to investigate with the RFC issue is one option as I had already mentioend in my original post, but that would take quality time to come to one conclusion.
Do we have any way out here to get this sorted out for the connector causing the error.
Regards,
Ameet

HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan Jackson

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

When checking email I now get an error message saying User name or password is incorrect...

When checking email I now get an error message saying User name or password is incorrect... Went to AT&T store and they didn't have a clue how to fix it...
I'm sure this question has been asked, but can someone point me in the right direction?

I am also having the same problem and I did go on my computer and change the password and my iPad still gives error message. Yes wish someone could help.

Error message on IPhone and IPad indicating user name or password is incorrect. Information is the same as on my gmail acct on my Mac

I have a working gmail account on my Mac and the same user name and password for my IPad. I am getting an error message when trying to retrieve mail on the IPad indicating that the user name or password is incorrect. I have tried deleting the account and adding it again, but doesn't solve the problem.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

SSO error "Name or password is incorrect. Please re-enter"

Similar Messages

Maybe you are looking for