SSRS 2008 R2: How to add Border to Parent Column group only in Tablix?

Hi there,
I have a report where there is a Parent and Child group on columns.  I want to add a left/right border to just the Parent Group (Fiscal Period) with no border between the Child grouping (Fiscal Weeks).  How can I do this?  I have found expressions
using the Previous function but that doesn't appear to be supported in a Tablix?  Am I missing something?

Hi Debn,
From your description, you want to use expression to display or hide the textbox border on the column base on it's scope, right? In Reporting Services, the color of the textbox border is support expression, however we cannot use the expression to display
or hide the textbox border dynamically. So I am afraid your requirement cannot be done.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

  • How to add border to a photograph

    how to add border to a photograph

    Depends on which app or software you are using to view the photo.  Read the "Help" instructions of the app and/or software.

  • How to add description of a column of a table in SQL Azure

    Hi
    I have some tables in my application database where there are descriptions added against certain columns. Needless to say they were done by using sp_addextendedproperty.
    Now I am trying to migrate the Database to SQL Azure. SQL Azure does not support sp_addextendedproperty.
    Hence I am not able to figure out how to add descriptions to those columns.
    Any help would be much appreciated.
    Thanks
    Soumyadeb

    Hello,
    Just as Latheesh post above, Windows Azure SQL database are not support extended stored procedures. That’s one of the limitations on SQL database, and I don’t know there is another way to achieve the same on Azure.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • How to ADD Materialized Views to Refresh Group

    Hi,
    My requirement is, i want to refresh MVs(fast refresh only) by using DBMS_SCHEDULER. For this i have created one DBMS_SCHEDULER job like below.
    BEGIN
    DBMS_SCHEDULER.CREATE_JOB (
    JOB_NAME      => 'REFRESH_MV_UPLOAD',
    JOB_TYPE           => 'PLSQL_BLOCK',
    JOB_ACTION      => 'DBMS_REFRESH.REFRESH('MV_UPLOAD_GRP');',
    REPEAT_INTERVAL      => 'FREQ=MINUTELY; INTERVAL=30',
    ENABLED      => TRUE
    END;
    In the above script, i created one refresh group 'MV_UPLOAD_GRP'. So what my requirement is i want to ADD my MVs refresh scripts to this group. Scripts as below...
    Refresh MV Scripts:
    1) Exec dbms_mview.refresh('emp.entity', 'f');
    2) Exec dbms_mview.refresh('emp.identifier', 'f');
    3) Exec dbms_mview.refresh('emp.rating_hist', 'f');
    . so on.
    Can anyboy help me how to add these scripts to refresh group 'MV_UPLOAD_GRP'.
    Regards
    Raj

    ALL_REFRESH and ALL_REFRESH_CHILDREN
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarsnapviews.htm#REPMA027
    Nicolas.

  • How to Add multiple entry to the group policy security filtering

    How to Add multiple entry to the group policy security filtering
    Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
    Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

    Hi
    Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
    Try right clicking on the policy and then edit
    Then in Editor Right click on the name of the policy and Properties
    Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
    the correct option also "From this Location" is set to your entire directory not the local server.
    Update us with the above.
    Thanks

  • How to add a button to the grouped data in an AdvancedDataGrid?

    Hi,
    Can anyone please suggest how to add a button to the grouped data in the AdvancedDataGrid?
    I have tried extending the AdvancedDataGridGroupItemRenderer and using it as the groupItemRenderer but its not reflecting.
    For the leaf node the itemRenderer property works just fine.
    Please help!

    HI ,
    I want to add a push button on the ALV list out put which is comming as a pop up and I want this using classes and methods.
    I have got a method IF_SREL_BROWSER_COMMANDS~ADD_BUTTONS from class cl_gos_attachment_list  but still I am unable to get any additional button on the output ALV popup.
    Please help.
    Regards,
    Kavya.

  • Regarding : How to add a user to portal group with the help of webdynpro .

    Hii ,
    I am working on an application in which with the help of an action( Button)  we r adding a user in Ztable in R/3 , as well as  group in portal.
    The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
    I need coding solution for " How to add a user to portal group with help of webdynpro"
    Any usefull link will also do.
    Pls anyone have any solution ??
    Thnks in advance.
    Rewards r waiting for u .

    Hi,
    Use UME api to add user to portal group.
    Using UME API:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
    Regards,
    Naga

  • How to add an extra dynamic columns in workflow inbox?

    Hi Every Expert,
    Transaction SWL1 only provides Six columns as dynamic columns for workflow inbox. But we need to use 7 to 8 dynamic columns. How to add these two extra columns into workflow inbox?
    Thanks,
    Shirley

    Thank you very much for all you responses.
    Due to SAP only provides 6 columns, I can't add anohter extra dynamic column. I may consider to change task to show the contents in preview pane.
    Thanks again to everyone.
    Shirley,

  • SSRS 2008 R2 - Add moving average to column group

    I have a column group of dollar amounts.  The row is a year/month.  I would like to add a moving average column to the right of the last 6 months.  My SQL Server data source is already complex enough and I'd really prefer not to add a column
    there.  Is there anything I can do within the report itself?  Some way to reference the previous records in a matrix?
    Thank you!

    Hi mateoc15,
    According to your description, you have a matrix in your report. Now you want to calculate the average value of last 6 month. Right?
    In Reporting Service, we can put custom code into report to deal with complicated logic. Add one more column/row inside of group and call the functions defined in custom code. For your requirement we modified Robert’s code to achieve your goal. We tested
    your case in our local environment with sample data. Here are steps and screenshots for your reference:
    Put the custom code into report:
    Private queueLength As Integer = 6
    Private queueSum As Double = 0
    Private queueFull As Boolean = False
    Private idChange As String=""
    Dim queue As New System.Collections.Generic.Queue(Of Integer)
    Public Function CumulativeQueue(ByVal currentValue As Integer,id As String) As Object
    Dim removedValue As Double = 0
    If idChange <> id then
            ClearQueue()
                    idChange = id
                    queueSum = 0
                    queueFull = False
                    CumulativeQueue(currentValue,id)
    Else
                    If queue.Count >= queueLength Then
                                    removedValue = queue.Dequeue()
                    End If
                    queueSum += currentValue
                    queueSum -= removedValue
                    queue.Enqueue(currentValue)
                    If queue.Count < queueLength Then
                    Return Nothing
                    ElseIf queue.Count = queueLength And queueFull = False Then
                    queueFull = True
                    Return queueSum / queueLength
                    Else
                    Return (queueSum) / queueLength
                    End If
    End If
    End Function
    public function ClearQueue()
    Dim i as Integer
    Dim n as Integer = Queue.Count-1
    for i=n To 0 Step-1
                    queue.Dequeue()
    next i
    End function
    Add one more row inside of group, call the function defined in custom code.
    Save and preview. It looks like below:
    Reference:
    Moving or rolling average, how to?
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou (Pactera)

  • How to add GPS to an ipad2 with only wifi

    How to add GPS to wifi only iPad

    From another discussion https://discussions.apple.com/message/20077221#20077221
    "Location services depend on a database of Wi-Fi access points with known geographical positions. If the device is not within range of at least one of those access points, it can't be located." - Linc Davis
    So if your iPad is near a WiFi access point with a known geographical position, you already have reasonable GPS-based location knowledge on your iPad.

  • How to add blank lines (in column) in SQLplus

    I get error when doing below insert, how do I add blank lines in column (via SQLplus)?
    insert into a values(1, '78 ABC house,
    Some Road
    London E34');
    Thanks

    Just set "SQLBLANKLINES" to ON:
    SQL> set sqlblanklines on
    SQL>
    SQL> insert into dept values (50, 'This department
      2
      3  has several
      4
      5  blank lines','This
      6
      7  Loc') ;
    1 row created.
    SQL> select * from dept where deptno = 50 ;
        DEPTNO DNAME                          LOC
            50 This department                This
               has several                    Loc
               blank lines
    1 row selected.
    SQL>

  • How to add users from person or group field in a sharepoint list to sharepoint group

    Hi,
    How to add users(single or multiple) from person or group field in a sharepoint list to sharepoint group programmatically?
    Any suggestions would be appreciated.
    Thank you,
    AA.

    Hello,
    Use SPGroup.AddUser() method to add user in group. I have just written sample code in notepad so it is not tested:
    SPSecurity.RunWithElevatedPrivileges(delegate()
    using(SPSite Site = new SPSite(SPContext.Current.Site.Url))
    Using(SPWeb Web = Site.OpenWeb())
    SPList list = web.Lists["ListName"];
    SPQuery query=new SPQuery ();
    query.Query = "<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>Test</Value></Eq></Where>";
    SPListItemCollection items = list.GetItems(query);
    if(items.Count > 0)
    foreach(SPListItem item in items)
    //Get USers from person or group column
    SPFieldUser userField = (SPFieldUser)item.Fields.GetField("Users");
    SPFieldUserValueCollection userFieldValueCollection = (SPFieldUserValueCollection)userField.GetFieldValue(item["Users"].ToString());
    SPGroup spGroup = spSite.RootWeb.Groups[groupName];//group name
    if (users.Count != 0)
    bool isUserInGroup = false;
    foreach (SPFieldUserValue user in users)
    foreach (SPUser item in spGroup.Users)
    string itemUserName = item.LoginName;
    string UserName = user.User.LoginName;
    if (itemUserName == UserName)
    isUserInGroup = true;
    break;
    if (!isUserInGroup)
    spGroup.AddUser(user.User);
    The above code will query list item and then get users from "Users" column. Now it will check whetehr user is already in group not, if not then add user in group.
    http://rajanijilla.blogspot.sg/2012/09/add-users-to-group-programmatically.html
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How to add ASM Disk to Disk Group that is shown as MEMBER?

    HI,
    We have a Production Oracle RAC on HP-UX. We have Two Disk Groups one for Arcive (ARC_DISK) and other for Database(DATA_DISK).
    Today I wanted to add another 200 GB of Disk Space to the DATA_DISK Group.
    I opened DBCA and could not find the new disk in the 'Show Candidates' option. But after the Unix admin changed the ownership and permission of the Disk, it was shown in 'Show Candidates' option. I selected this Disk and continued but got an error later as we didnt change the ownership and permission from the 2nd Unix server. After doing this, , when I open DBCA to add disk, nothing is shown in 'Show Candidates' option but when we click on 'Show All', the new disk is listed as MEMBER (header status) but not allocated to any Disk Group.
    I would like to know how to allocate this Disk (which is already shown as MEMBER) to the DATA_DISK - ASM diskgroup. This is a production database system.
    Rgds,
    Thiru

    user1983888 wrote:
    Hi,
    Due to huge difference in Disk Size which I am trying to add to the existing Disk Group which has 1024 GB of Disk, would it be a better idea to create a new Disk Group with 200g GB Disk? Will this command work as the header_status is already MEMBER?
    SQL>CREATE DISKGROUP DATA_DISK1
    EXTERNAL REDUNDANCY
    DISK 'disk path';
    Thanks.Yes, you can create new diskgroup (DATA_DISK1). Just make sure all datafile in DATA_DISK autoextend off, then create all your new datafile to the new diskgroup DATA_DISK1. The command will not work as the header_status is MEMBER. You'll receive ORA-15018 & ORA-15033 error. As I mentioned before, you need to use FORCE option or format the disk using dd* command before perform above command.
    1st Option : (Format the raw disk using dd command creating new diskgroup. Header_status MEMBER -> CANDIDATE). E.g.
    1. dd if=/dev/zero of=/dev/rdsk/c2t1d0 bs=8192 count=1000 //any rac nodes
    2. # chown oracle:oinstall /dev/rdsk/c2t1d0 //perform on both node. This apply if using LVM or direct access to raw
    3. SQL> create diskgroup data_disk1 external redundancy disk '/dev/rdsk/c2t1d0'; //any RAC node in ASM instance
    4. SQL> alter diskgroup data_disk1 mount; //try to mount on the other node
    2nd Option : (Using FORCE option when creating the new diskgroup. Header_Status = MEMBER)
    1. # chown oracle:oinstall /dev/rdsk/c2t1d0 //perform on both node. This apply if using LVM or direct access to raw
    2. SQL> create diskgroup data_disk1 external redundancy disk '/dev/rdsk/c2t1d0' force; //any RAC node in ASM instance
    3. SQL> alter diskgroup data_disk1 mount; //try to mount on the other node
    Just be careful when using FORCE option or DD command. If you perform this operation on existing ASM disk groups disk, it may destroy existing disk groups.

  • How  to add a new option for group by in a excel report

    Hi,
    there is a enhancement in a excel report
    I need to add a new option for group by
    help me
    Regards,
    Raghu

    k

  • How to add some text between columns in dashboard prompt?

    Hi,
    OBIEE version:10.1.3.4.1
    Can we add some words between columns in dashboard prompt?
    like, I want to add OR, make sure user not to select different month, if selected the different months it will make the report no data.
    Month OR Date Range(this is a calendar)
    Does anyone have any idea about this?
    Thanks in advance!
    Regards,
    Anne

    Hi,
    If you are using the prompts with presentation variables or referring only the columns separately then you can create individual prompts and place static text between them.
    But if you need to have both the prompt columns together then create the prompts and use 'space' as the label names for both.(ie prompts would appear but the name wont appear). And create a static text in the page or in a report and place in the page. Which appears as the name of the prompt with 'OR' between the prompt names.
    This should solve your problem.
    Edited by: MuRam on Jan 13, 2012 10:18 AM

Maybe you are looking for