SSRS expression for division

Hi All,
Below is the my table with SSRS expressions marked as A and B 
Expression A gets the serial number 1, 2, 3 etc
I need to get expression A/B
Any help on this much appreciated
Thanks 
Pradnya07

It's look like you want B/A, not A/B.
You can try couple things. If you are allowed to use ReportItems and refer to the textbox value, then simply use this:
=ReportItems!textboxnameforB.Value / ReportItems!textboxnameforA.Value
If that gives you error as far as not allow to use ReportItems, then try create a divide function in custom code and then pass the value to it.
Public Function Divide(Num1 as double, Num2 as double) AS double
    IF IsNothing(Num1) Or  IsNothing(Num2) Or Num1 = 0 Or Num2 = 0 Then
        Divide = 0
    ELSE
        Divide = Num1  / Num2
    END IF
End Function
Then, simply use this in the textbox you want the value:
=code.Divide(RunningValue(Fields!new_programmeoutputid.Value,CoutDistinct, "new_outputs"),RunningValue(Fields!new_claimmonthid.Value,CountDistinct,
Nothing))
If that still does not work, then try to bring these values in the query itself.
good luck.

Similar Messages

  • SSRS expression for today,yesterday,Lastweek ,Last fortnight,Last Month, Year to date

    Hi All;
    I have a field called createdon 
    Using this field i need to create the SSRS expression for the table as below 
    Any help much appreciated
    Thanks
    Pradnya07

    use expressions as below
    assuming this is to be done in SSRS
    Today
    =COUNT(IIF(
    DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
    Yesterday
    =COUNT(IIF(
    DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
    LastWeek
    =COUNT(IIF(
    DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
    Last fortnight
    =COUNT(IIF(
    (DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-1)
    Or (DateDiff(DateInterval.Week,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Week,Cdate("01/01/1900"),Now())-2),Fields!YourRequiredField.Value,Nothing))
    Last Month
    =COUNT(IIF(DateDiff(DateInterval.Month,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Month,Cdate("01/01/1900"),Now())-1,Fields!YourRequiredField.Value,Nothing))
    Year To Date
    =COUNT(IIF(DateDiff(DateInterval.Year,Cdate("01/01/1900"),Fields!createdon.Value) = DateDiff(DateInterval.Year,Cdate("01/01/1900"),Now())
    And
    DateDiff(DateInterval.Day,Cdate("01/01/1900"),Fields!createdon.Value) <= DateDiff(DateInterval.Day,Cdate("01/01/1900"),Now()),Fields!YourRequiredField.Value,Nothing))
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • SSRS Expression for Conditional Filtering using the "IN" operator

    Hello,
    I need to filter my dataset based on a parameter:
    If Period= 1 then Week must be in (W1, W2, W3),  Else Week must be in (W10, W20, W30)
    I tried using the "IN" operator but don't know how to create the expression for the "Value" field. I tried the following:
    iif(Parameters!Period.Value = 1,
    "W1, W2, W3",
    "W10, W20, W30")
    But it doesn't work.
    Expression: Week
    Operator: IN
    Value: ???
    Any help would be highly appreciated!

    Hi,
    Use split function.
    See this expression: IIF(Parameters!Period.Value = 1, SPLIT("W1,W2,W3",","), SPLIT("W10,W20,W30",","))
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8da78c9b-7f0c-42f1-a9c4-82f065f317c9/using-the-in-operator-in-ssrs-expressions
    Thanks Shiven:) If Answer is Helpful, Please Vote

  • SSRS Expression for hiding some columns in column group based on parameter

    I have a matrix table with column name WeekName which has the values of W1, W2, W3 and W4 which expands 4 columns when run. I need to hide the columns based on a parameter called WeekPar as follows:
    If WeekPar = 1, hide columns W1,
    If WeekPar = 2, hide columns W1 and W2
    What would be the expression for that?
    I know how to hide individual columns, but not some of the columns in a group. Is this possible?
    Thanks in advance!

    Hi QQFA,
    After testing the issue in my local environment, we can refer to the steps below to achieve your requirement:
    Right-click the WeekName column to open the Column Visibility property dialog box.
    Using the expression below to control the Column Visibility (supposing the cell which contains WeekName field named WeekName ):
    =switch(Parameters! WeekPar.Value=1,ReportItems! WeekName.Value="W1", Parameters! WeekPar.Value=2,ReportItems! WeekName.Value="W1" or ReportItems! WeekName.Value="W2")
    If you have any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SSRS expression for grouping minutes

    Hi All,
    Can you please help me to write an SSRS expression to group minutes
    =SWITCH(
    Fields!TotalHours.Value = 0
    and  240,
    "0 To 4 hrs",
    Fields!TotalHours.Value = 241
    and480,
    "5 To 8 hrs",
    Fields!TotalHours.Value = 481
    and720,
    "9 To 12 hrs",
    Fields!TotalHours.Value = 721
    and960 ,
    "13 To 16 hrs",
    Fields!TotalHours.Value = 961
    and1200,
    "17 To 20 hrs",
    Fields!TotalHours.Value = 1201
    and12000000,
    "More than 20 hrs"
    Any help much appreciated
    Thanks
    Pradnya07

    Try this...
    = SWITCH ( Fields!TotalHours.Value <= 240, "0 to 4 Hrs",
    Fields!TotalHours.Value <= 480, "5 to 8 Hrs",
    Fields!TotalHours.Value <= 720, "9 to 12 Hrs",
    Fields!TotalHours.Value <= 960, "13 to 16 Hrs",
    Fields!TotalHours.Value <= 1200, "17 to 20 Hrs",
    Fields!TotalHours.Value > 1200, "More than 20 Hrs")

  • SSRS expression for difference between two currency values

    Hi All;
    I need to get the difference between two currency values
    Below is my report
    I need to get differene between Actual Income and Profile Income and this value should be in "£" In this example it should be £0.00
    Any help much appreciated
    Thanks
    Pradnya07

    =sum(Fields!ProfileIncome.Value - Fields!ActualIncome.Value)
    This could have either field first, but depends on which field is expected to be larger. You would then format the textbox to show in pounds.
    HTH

  • SSRS Expression to calculate percentage with the denominator being the first value in the same column group in a matrix report

    Hello, Expert,
    Could you please help me with the following problem? Thanks in advance!
    I have designed the matrix report (SSRS 2012) with database table structure looks like below.    
    Week           
    Version
         Count
    Week1
    V1.1
    4000
    Week1
    V1.2
    4000
    Week1
    V1.3
    4000
    Week2
    V1.1
    3000
    Week2
    V1.2
    3000
    Week2
    V1.3
    3000
    Week3
    V1.1
    2000
    Week3
    V1.2
    2000
    Week3
    V1.3
    2000
    Week4
    V1.1
    1000
    Week4
    V1.2
    1000
    Week4
    V1.3
    1000
    The matrix report displays like below. Column grows based on no of Week in the table.   
    Week1
    Week2
    Week3
    Week4
    V1.1
    4000
    3000
    2000
    1000
    V1.2
    4000
    3000
    2000
    1000
    V1.3
    4000
    3000
    2000
    1000
    What I want to do now is: instead of the Count values, I need to calculate the percentage of each week over the
    Count in Week1 so that each cell displays Count(Week2)/Count(Week1), Count(Week3)/Count(Week1), etc. What is the SSRS expression for that? I’m new to SSRS, Please help!

    Heidi,
    Thank you so much for your reply and solution! Now I know how to get the first field in a group. But I can't apply your solution directly just yet because in order to explain my problem I simplified my data structure. My real data structure has a nested
    group like this:
    Week  VersionMajor VersionMinor Count
    Week1  V1           V1.1         2000
    Week2  V1           V1.1         1500
    Week3  V1           V1.1         800
    Week1  V1           V1.2         1000
    Week2  V1           V1.2         500
    Week3  V1           V1.2         200
    Week1  V1           V1.1         2000
    Week2  V1           V1.1         1500
    Week3  V1           V1.1         800
    Week1  V1           V1.2         1000
    Week2  V1           V1.2         500
    Week3  V1           V1.2         200
    Here is the query for the above data:
    SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 2000 AS Count
    UNION ALL
    SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 1500 AS Count
    UNION ALL
    SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 800 AS Count
    UNION ALL
    SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 1000 AS Count
    UNION ALL
    SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 500 AS Count
    UNION ALL
    SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 200 AS Count
    UNION ALL
    SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 2000 AS Count
    UNION ALL
    SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 1500 AS Count
    UNION ALL
    SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.1' AS VersionMinor, 800 AS Count
    UNION ALL
    SELECT 'Week1' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 1000 AS Count
    UNION ALL
    SELECT 'Week2' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 500 AS Count
    UNION ALL
    SELECT 'Week3' AS Week, 'V1' AS VersionMajor, 'V1.2' AS VersionMinor, 200 AS Count
    And my matrix table looks like this:
    What I need to do is to calculate the percentage of each week over week1 for
    1) V1 Total
    2) V1.1
    3) V1.2
    I can't use your solution directly because I need to apply Sum function for each cell and the Sum function gives me error when I try to use it on the denominator
    First(Fields!Count.Value,"VersionMinor"). If you could help me further to get to the final solution, I'd really appreciate it!!
    Happy New Year!

  • Pass function name as parameter in SSRS expression

    I have a function (GetColumnFieldName) which returns string datatype
    Now I want to use this function in below SSRS expression
    =Code.GetDisplay("FirstName",Parameters!SelectedCols.Value,Parameters!DisplayCols.Value)
    At the above expression I want to replace "FirstName" with  function GetColumnFieldName which returns the same "FirstName".
    Please suggest.

    Hi Jajatibabu,
    If I understand correctly, you want to use GetColumnFieldName function which returns a field name to replace the “FirstName” in the expression you post.
    If in this scenario, we can directly use Code.GetColumnFieldName(parameters) to replace the “FirstName” like below:
    =Code.GetDisplay(Code.GetColumnFieldName(parameters),Parameters!SelectedCols.Value,Parameters!DisplayCols.Value)
    Note that we should type the correct parameters in the GetColumnFieldName function.
    If there are any misunderstanding, please elaborate the issue for further investigation.
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • SSRS Expression Current month in a Fiscal calendar dimension from a SSAS cube

    How to create an expression for a default SSRS parameter to a SSAS cube when using i Fiscal Year calendar - and where I want to show current Calendar month and year (for example February 2014) 
    This is an example of my Time dimension for February 2014:
    [Time].[FiscalYMD].[Fiscal_Year].&[2013].&[10]
    The fiscal calendar goes from May - May - which means that April 2014
    would look like this:
    [Time].[FiscalYMD].[Fiscal_Year].&[2013].&[12]
    and May 2014 would look like this:
    [Time].[FiscalYMD].[Fiscal_Year].&[2014].&[01]
    Please advise

    Hi HCMJ,
    To represent the fiscal calendar, you shift the current date by 4 months back. Then you can do:
    ="[Time].[FiscalYMD].[Fiscal_Year].&[" & Year( DateAdd( "m", -4, Today() ) ) & "].&[" & Month( DateAdd( "m", -4, Today() ) ) & "]"
    It just gets the year and month of '4 months ago'. I have not tested it, but I guess it should work.
    Regards
    Andrew Borg Cardona

  • How to pass Multi and Singlr value Parameters to DB2 query, which is using in SSRS report for ODBC connection

    Hi Guys,
    I am using DB2 database in SSRS. I have to pass Single Value and Multi Value Parameters. I tried with Select * From DB2Table Where
    Column=@PRM_Name Or Select * From DB2Table Where
    Column=:PRM_Name . It is not working and throwing error. Please help me out.
    Connection Details: ODBC
    Thanks Shiven:)

    Hi SKM,
    So you mean to say that Go to DataSource->Add Dataset-> Query Type-Text-> Under Query:
    click on fx (Expression)-> Write this expression
    For Single Value Parameter:
    ="SELECT customer_name, telephone_number, address1, address2, city from MyTable
    WHERE city = '" + Parameters!City.Value + "'"
    OR
    ="SELECT customer_name, telephone_number, address1, address2, city from MyTable
    WHERE city =  '" & Parameters!City.Value & "'"
    Keep it in mind if Parameter is String then
    It should be in Single quote ''.
     Like
    ="SELECT customer_name, telephone_number, address1, address2, city from MyTable WHERE city
    ='Hyderabad' "
    For Multivalu Parameter:
    ="SELECT EmployeeID, FirstName, LastName, LoginID FROM SHIVEN.AUDIT Where FirstName
    in ('" + REPLACE(JOIN(Parameters!City.Value,","),",","','") + "')"
    NOTE:
    If your Parameter is Single Value Parameter and You want to enter string values with Coma (,)
    separated (Like Hyderabad, Chennai, Delhi).
    In this case, you have to use below expression.
    ="SELECT customer_name, telephone_number, address1, address2, city from MyTable
    WHERE city IN ('" + REPLACE(Parameters!City.Value ,",","','") + "')"
    OR
    ="SELECT customer_name, telephone_number, address1, address2, city from MyTable
    WHERE city IN  ('" & REPLACE(Parameters!City.Value ,",","','") & "')"
    In above expression: Replace will replace all , with ‘,’ and city IN (‘Hyderabad’, ‘Chennai’,
    ‘Delhi’) will not throw any error.
     Note: You have to write expression in one line in Expression editor for dataset
    query
    Thanks It is working fine but it is tough job if query is big.
    Hi S kumar,
    The above approach we use when we have source like DB2, becasue DB2 has some syntactical differences to pass multivalue paramaeter. I tested and it works good, if i am mentioning the query in above format by using Fx button while creating dataset.
    but if we want fetch data from view which exist in DB2 and we need to call db2 view in SSRS and pass multivalue parameter in a way we did above then could you please mention the steps and way to achieve this.
    Thanks in advance!

  • SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

    Hi,
    I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
    PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
    "processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
    report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
    Default' to data type int."
    My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
    Troubleshooting performed:
    1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
    reporting started throwing errors again.
    2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
    3. re-registered the SQL management Provider WMI class.
    mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

    Hi All,
    Finally found exact solution to the reporting error.
    Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
    It may already have been terminated. (rsRuntimeErrorInExpression)"
    Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
    primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
    Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
    Reporting Services Point in SCCM Primary Site, and then click apply.
    Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

  • SSRS Expression with OR

    Hi, 
    Can anyone tell me how to use OR in an SSRS expression?
    I would like to set the BorderStyle Left (& Right) property to "None" for two rows so I need to
    use an OR (6 or 9)  
    This is what I have so far:
    =IIf(RowNumber(nothing)=6,"None","Default") 

    Hi,
    Try Below,
    =Switch(RowNumber(nothing)=6 ,"None",RowNumber(nothing)=9,"None")
    OR
    =IIf(RowNumber(nothing)=6 OR RowNumber(nothing)=9,"None","Default")
    OR
    =IIf(RowNumber(nothing)=6,"NONE",IIf(RowNumber(nothing)=9,"NONE","Default"))
    Thanks

  • How Get last five quarters data using ssrs expression

    Hi All,
    i have an ssrs report where i have to get last five quarters data  and also last five months data when i select quarterly/monthly parameter.....
    is there any possibilty that we can get this using ssrs expression
    any help please.........

    Hi Mr.SMK,
    According to your description, there is an SSRS report, you want to create a parameter, when you select quarterly, data of last five quarters will be displayed. If you select monthly, data of last five months will be displayed. If that is the case, please
    refer to the following steps:
      1. In design surface, in Report Data pane, right-click Parameters and click Add Parameter.
      2. Type parameter name and prompt, set Data Type to Date/Time.
      3. Click Available Values in left pane, select Specify values.
      4. Click Add button, in Label text box, type Quarterly, then click (fx) button and type the expression like below:
    =DateAdd("q",-5,Today())
      5. Click Add button, in Label text box, type Monthly, then click (fx) button and type the expression like below:
    =DateAdd("m",-5,Today())
      6. Right-click the dataset used to retrieve data for the report and open Dataset Properties dialog box.
      7. Click Filters in left pane, click Add button, select Data from Expression drop down list, set Operator to >=, in Value text box, type [@ParameterName].
    The following screenshots are for your reference:
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    Wendy Fu
    TechNet Community Support

  • Ssrs expression to sql query

    Hi,
    I am unable to convert the below ssrs expression to sql query. can you guys help.
    --          IIF(Parameters!parameter1.Value Is Nothing, 
    --               " 3>2 ", 
    --               "column1 NOT LIKE
    --                           Replace(IIF(Left(Parameters!parameter1.Value, 1) = "'", 
    --                                             Parameters!parameter1.Value, 
    --                                             "'" & Replace(Parameters!parameter1.Value, "'", "''")  "'"),
    Thanks.

    Thank you for your response Carnegie,
    I actually have two stored procedures as below. (columns and joined tables are excluded)
    I need to change the dates of @DateFrom and @DateTo parameter, I am passing @DateFrom_FD and @DateTo_LD as well.
    CREATE ROCEDURE [dbo].[Test]
    (@DateFrom
    SMALLDATETIME
      , @DateTo
    SMALLDATETIME
      , @program
    VARCHAR(MAX))
    AS
    DECLARE
    @DateFrom_FD
    SMALLDATETIME
           , @DateTo_LD
    SMALLDATETIME
    SET @DateFrom_FD = DATEADD(MONTH,DATEDIFF(MONTH,0,@DateFrom),0)
    SET @DateTo_LD = DATEADD(DAY,-1,DATEADD(MONTH,DATEDIFF(MONTH,0,@DateTo)+1,0)) 
    SELECT 
      DimDate.[Year]
    , DimDate.[Month]
    , DimDate.PK_Date
    , CustomerID
    FROM DimDate
    WHERE DimDate.PK_Date BETWEEN @DateFrom_FD AND @DateTo_LD
    Now I am using one of the SP as a main report and the other SP as a subreport.
    In order to configure the main report and the subreport, I believe that I need to link them with parameters.
    However, in the parameters of subreport properties, the option given are only @DateFrom and @DateTo.
    No @DateFrom_FD AND @DateTo_LD
    Therefore, I am thinking to use expressions to convert @DateFrom and @DateTo the same way I did in SQL.
    I am not sure if this works....but this is the only thing that I could think of.
    Thank you,
    YJB5151

  • Issue with SSRS Expression

    Hi all, 
    I am facing some issue with ssrs expression. 
    I used below expression to show sum of budget. 
    =Sum(  CDbl(Fields!Budget.Value))
    When I preview the report it shows #Error in that textbox. 
    Please help me to fix this one , I am not getting where its breaking.. 
    Thanks
    Rohit

    Hi Rohit,
    According to your description, you want to sum the [EstimatedCostField] with an expression.
    In your scenario, since the [EstimatedCostField] is budget which you want to perform sum calculation, you should specify the sum expression like below:
    =Sum(CDbl(Fields!EstimatedCostField.Value))
    If issue persists, please run the report in the BIDS then check the warning message in output to see the detail information about the #Error. Besides, please also share the report design for our analysis.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

Maybe you are looking for

  • Decimal places in SRM-MDM Catalog 3.0

    Hi experts, Iu2019m using SRM-MDM Catalog 3.0 and Iu2019ve an issue related to the decimal places configuration. Our products are defined with 2 decimal places and after importing the records I can see them in Data Manager with the correct price info

  • I work on two screens. With the new updates, my computer will not automatically open a new window on the second screen.

    I work on two screens. With the new updates we cannot automatically open a new window on the second screen, but have to move them over manually. Not a huge problem, but because of the nature of the work, it gets tedious.

  • How to avoid the same BW metachain to run in parallel?

    Hi Everyone, I had an issue in which the a metachain was triggered unexpectedly while it is already running. Hence parallel processing occurred. I just wonder if you have a proposed solution that will avoid this scenario. Possibly a chain/job set-up

  • Second replacement 3G (3.1.3) Still got camera problems.

    I was having problems with the photos on my replacement 3G,(3.1.3) they were very blurred. Took it back & they replaced it again however i find the same problem again. Photos on camera-roll are ok, not blurred, but if i email myself a photo from came

  • Animation File Not Resetting

    I have a swf file which has a simple animation on it. If I import that animation then apply an effect like a tween, the effect on the animation works great the first time. If I go to the next slide then click back, the effect on the animation does no