SSRS Report Viewer 2012 Cancel Link on loading spinner not stopping SQL Query

Hi
I searched the forum for this one and didn't find anything germane, so here goes.
In SSRS 2012 when running a report interactively if you hit cancel it basically does nothing but stop the spinner and prevent the request from completing.
I'd like to kill the SQL Query (dataset refresh) when the Cancel link is pressed.
I recall seeing on article somewhere about doing a callback and calling some other method on the web service to kill the query, but I can't find it now.
Any help is much appreciated!
Thanks

Hi James,
In SQL Server Reporting Services, a job will be created by SQL Server Agent if any of the following processes is underway:
query execution on a remote or local database server
report processing
report rendering
To cancel a job that is running on the report server, we can cancel the job directly or reduce the report execution time-out value in the SQL Server Management Studio. Please refer to the steps below:
Open SQL Server Management Studio, and connect to "Reporting Services".
Under the Report Server node, right-click on the "Jobs" folder and select "Refresh". Then, right-click on "Jobs" again and click "Cancel All Jobs".
Right-click on the Report Server node and open the "Server Properties" dialog.
Click the "Execution" option, and set the "Limit report execution to the following number of seconds:" to a much smaller number. After this issue is resolved, this configuration should revert to the previous state.
Reference:
Managing a Running Process
Setting Time-out Values for Report and Shared Dataset Processing
In addition, we can also use the KILL Transact-SQL statement to terminate a normal connection by terminating the transactions that are associated with the specified session ID. For the details information, you can refer to:
KILL (Transact-SQL)
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Similar Messages

SSRS report viewer web part error only in IE not in Chrome & Safari

SSRS is setup in SP integrated mode.
I am getting this error when I click a report parameter drop down for the second time to display the list of avaliable values:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response
filters, HttpModules, or server trace is enabled. Details: Error parsing near '< !DOCTYPE html PUB'.
I researched this issue and have added the following to my SP site's web.config:
<appSettings>
<add key="aspnet: MaxHttpCollectionKeys" value="5000" />
</appSettings>
Oddly enough, I only get this error in IE not in Chrome it works fine... Any ideas on how to correct?
fyi- Drop down has <25 items I would say.

Hi,
According to your post, my understanding is that you had some issues about the SSRS.
As you had known, this issue is caused that Microsoft security update MS11-100 limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request.
Because of this change, ASP.NET applications reject requests that have more than 1000 of these elements.
HTTP clients that make these kinds of requests will be denied, and an error message will appear in the web browser.
SSRS report filtering column were sending as HTTPCollectionKeys and that was reaching the maximum limit.
The solution is adding the MaxHttpCollectionKeys as you had did, you can try add a larger number to check whether it works, such as 9999 as below.
<appSettings>

<add key="aspnet:MaxHttpCollectionKeys" value="9999" />
</appSettings>
http://blogs.msdn.com/b/paulking/archive/2012/01/16/using-an-http-module-to-assist-in-adjusting-the-value-of-aspnet-maxhttpcollectionkeys-imposed-by-ms11-100.aspx
As this issue is related to the SSRS, you can post the issue to the SSRS forum.
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
More experts will assist you, then you will get more information relation to SSRS.
Thank you for your understanding and support.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SSRS Report Viewer Control Parameter alignment

I am having problem aligning parameters in ssrs report viewer control ,is there any way i can control the display of the parameters in left side alignment or right side alignment. please see the below pic for more details.
I am using vs.net 2012 and sql server 2012 and calling this server report in a asp.net page using report viewer control and report viewer process mode is "Remote"
http://social.msdn.microsoft.com/Forums/getfile/514664

Hi siva9000,
In Reporting Services, we cannot customize the parameter pane like the ways you have mentioned above. We can refer to the following link, vote it is as important and hope Microsoft improve this feature in the next service pack or product release. Allow
SSRS Parameter Panel to be formatted:
https://connect.microsoft.com/SQLServer/feedback/details/545893/allow-ssrs-parameter-panel-to-be-formatted
In addition, as Olaf suggested, we can hide the parameter prompt area, then create a custom parameter prompt area in the web page to achieve the goal. Please refer to the following blog:
http://www.mssqltips.com/sqlservertip/1751/custom-control-and-setup-of-ssrs-report-parameters-from-a-web-page/
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Unable to install Report Viewer 2012

As part of the SCOM console install I need to install Report Viewer 2012. To install Report Viewer 2012 I need to have Microsoft System CLR Types for SQL Server 2012.
I have installed all versions of CLR Types for SQL Server 2012 that I can find. But I still am not able to install Report Viewer 2012. It errors out when checking for CLR Types for SQL Server 2012.
I have tried every variation of report viewer (2008,2010,20120) and CLR Types for SQL Server (32bit/64bit). I am just not able to install report viewer so I can install the SCOM console.

Go to the link below
http://www.microsoft.com/en-us/download/details.aspx?id=35580
and then select SQLSysClrTypes. You don't need all the files.
Did this multiple times with the same result. After installing the ClrTypes the Report Viewer still indicates that it is failing that requirement.

SSRS report viewer webpart issues in SharePoint 2013

Even though SSRS Add in has been installed on both the frontends which are in the same SharePoint 2013 farm, SSRS report viewer web part does not render any reports from one of the servers and on that server it just asks to configure the webpart by giving
an option to open the tool pane...
I am really not sure why it is not picking up the report RDL configuration, which is working fine from the other server.
Any help on this would be really appreciated.
Thanks in advance.

Run the SharePoint Products and Technologies Wizard on this server. If simply running it does not fix it, remove the server from the farm and then re-join it, using the wizard.
Stacy Anothersharepointblog.blogspot.com

SSRS Report Viewer Web Part - Saving it as a Project Site Template

Hi all,
I ended up creating a custom filter web part that was passing the PUID to SSRS report viewer web part in a project site.
Works perfectly fine until you save the site as a project site template. I attached the site template to an EPT and creating a new project. The project site created fine, but the connections between the custom filter web part and SSRS Report viewer web part
is broken!
Paul gave me this web part to start with, but this doesn't work in SharePoint Integrate Mode:
http://gallery.technet.microsoft.com/projectserver/Report-Viewer-webpart-439e0062
And SharePoint Integrated Mode is what we are pushing our clients towards.
Any help will be highly appreciated.
SJ

Looks like I forgot to respond to this...apologies for the delay.
For the client that I asked this question, I ended up writing it programmatically and it works.
But I would prefer using products now...rather than Band-Aid approach - I guess my role is shifting.
Luckily I was introduced to a SharePoint and Project Server developer here in London and he has been developing products for SharePoint and Project Server since version 2007! I spoke about my dilemma and he already had a product for this for SP
integrated mode! I have now started to add this product to all my the PS2010, PS2013 implementations. Great thing is it doesn't cost much at all and he provides support for it as part of subscription. I guess I twisted his arm a little bit - not physically!
So far I have used the product at two sites and applied CUs over it - no issues at all. This is a proper packaged product and can't recommend it high enough. Yes, you will have to let the client know about this third party tool, but we manage the relationship
on behalf of the client - just like when we buy Nintex, IPMO or Fluentpro products.
If anyone is struggling with SSRS web part in Project Sites and doesn't have the time to write codes as they have multiple PS implementations on the go then you can contact
[email protected]
I must say his marketing isn't that great, but since he is a freelancer he only works and sells his products to people within his network, I think he maybe changing that soon! Hopefully :-)

Report Viewer 2012 Word Render Margin Problem‏

Hi all,
I am developing a asp.net web application /w visual studio 2012. I have created some reports with report viewer, and I would like to export those reports to pdf and MS Word format. The pdf output is same as I expected, but the word output is
missing top and bottom margin, it leads we cannot print the header and footer correctly in MS Word, also the repeat header on each page property didn't work too.
If I use report builder 3.0 and try to export the reports to pdf and MS Word format, the problem still exists.
Is anyone has the solution for this issue?
I think its related to sql server reporting services, please let me know if I posted at wrong category.
Thanks,
hk

Hi hkcheung,
According to your description, you have issues when exporting the report into Microsoft Word file. The margin of header and footer can't be displayed. And the RepeatOnNewPage property is not working. Right?
In Reporting Services, when we export the report into Word file, it will ignore page header and footer height settings. Also Word does not repeat header rows on page two and greater, although you set the
RepeatOnNewPage property of the static header row in a tablix (table, matrix, or list) to
True. For more information, please see the limitations in the link below:
Exporting to Microsoft Word (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Sharepoint 2010 SSRS Report Viewer Print button not doing anything

We are having trouble printing reports from report viewer integrated in SharePoint 2010. On IE 11 compatible mode clicking print button does nothing.

Hi,
Please test the issue on different browsers and client PCs.
Did you find any related error message in ULS log or event log?
If you are recieving the error “Unable to load client print control”, please refer to the link below and see if it can be help:
http://blogs.msdn.com/b/mariae/archive/2010/04/13/error-unable-to-load-client-print-control-when-printing-reports-in-reporting-services-summary-of-all-possible-causes-at-april-2010.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

NeoDynamic Barcode Proffessional Upload Error in SSRS Report Server 2012

Hi,
I am Developing a SSRS Report for Displaying Barcode . I am Using Neodynamic Barcode Proffessional and the Report is Working fine in Developer Machine (MY Machine). When i try to Upload the Report into SSRS Report Server i get this Error Can any one Help on
this. Thanks in Advance
Note : I am Using SSRS 2012 Version and The Report Server is also the Same
Error : Error while loading code module: ‘Neodynamic.ReportingServices.Barcode, Version=7.0.2000.0, Culture=neutral, PublicKeyToken=c6b33c3093a0d4cd’. Details: Could not load file or assembly 'Neodynamic.ReportingServices.Barcode, Version=7.0.2000.0, Culture=neutral,
PublicKeyToken=c6b33c3093a0d4cd' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040) (rsErrorLoadingCodeModule) Get Online HelpError in class instance declaration
for class Neodynamic.ReportingServices.Barcode: [BC30002] Type 'Neodynamic.ReportingServices.Barcode' is not defined. (rsCompilerErrorInClassInstanceDeclaration) Get Online Help There is an error on line 4 of custom code: [BC30451] Name 'Neodynamic' is not
declared. (rsCompilerErrorInCode) Get Online Help

Hi cbazrm,
According to your description, you add an external assembly to display barcode in your report. It works properly in developing environment. But it throw the above error after deploying onto report server. Right?
Based on the error message, the report server side doesn't have the assembly added, so it can't use the assembly to render the barcode.
In this scenario, we should copy the AgeAssembly.dll to the “C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\bin” folder then drag and drop the assembly to the C:\Windows\assembly too.
Reference:
SSRS - Custom Code with External Assemblies
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Cannot download .rdl files in SSRS Report Manager 2012.

I am unable to download .rdl reports in report manager 2012.
I am able to create reports using report builder and I am able to run /view reports that I create.
However , the drop down box does not work work when I attempt to access drop down menu that is to the right of the report.
I am running this report manager on my local machine. I am an administrator on my local machine.
Under "site settings" I have set up my user account, which is administrator, I have checked the System Administrator box and System User box.
Under "folder settings" I have checked all of the boxes. for my user account, I have all of the boxes selected. Browser, Content Manager, My Reports, Publisher, Report Builder.
My account is also sysadmin on the database.
After checking all of this, I still cannot access the drop down menu in order to download .rdl files. The menu does not activate at all when I click it.
What are some things that I can further check/confirm?
[email protected]

Hi wayne,
According to your description, you are unable to access the dropdown menu of a report so that you can't download the .RDL file directly from Report Manager. Right?
In this scenario, it can be many reasons to cause this problem, even the current user has enough authority to do anything on Report Manager. Please try to do trouble shooting as below:
Run the browser as an Administrator.
Add the Report Manager URL as Compatibility View settings.
Use http://<servername>/reports instead of using Localhost.
If the steps above still can't make you see the dropdown menu, it might caused by corrupt reportingservices.js file. Please try to restore this file on server.
Reference:
SSRS 2008 - Report Manager - Drop-Down menu gone missing
can not open the drop-down arrow besides the report in SSRS report manager to add subscription
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS Report Viewer display issues after KB2888505 and now KB2898785

After patch KB2888505 both IE 9 and IE 10 started displaying cropped images with horizontal scroll bars when viewing SSRS Reports.  These reports functioned and fit the screen without scroll bars prior to this patch and returns
to normal once the patch is uninstalled.  There is no compatibility mode icon in the address bar and I have tried all browser modes in the F12 Developer Tools Menu with no change. Rolling back KB2888505 was a temp fix for my
users until KB2898785 was installed reverting back to the same cropped reports with the scroll bar. The only versions of IE in my environment are 9 and 10 and upgrading to 11 is not an option at this time. Others have reported this same issue so
maybe we can get more visibility on TechNet.

Hi,
These two KB include too many Individual updates. It's hard to figure out which exact update lead to this issue.
If you make sure the issue is caused by these updates package. The simple and easier way is to uninstall them.
Karen Hu
TechNet Community Support

Steps to migrate 2005 SSRS reports into 2012 SSRS?

Hi All,
I will migrate bunch of datamarts from 2005 to 2012
SO Any idea where should I start looking and steps to take for SSRS reports?
thanks,
Gok

Hello Gok,
Just open the BIDS 2005 SSRS Project in SSDT 2012 (SQL Server Data Tools) and the Project will be automatically migrated to the new Version; pretty simple.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SSRS Report Viewer control not displaying images properly

Hi All,
when i execute the report in Report Manager i am able to see the report with out any issue,but when i am running the report using report viewer control images getting chopped or Croped like below screen
shot.
i am using VS.net 2012 and Sql server 2012 and calling server reports in the asp.net application using Report Viewer control version 11.0
One interesting thing is some times i am able to see the images some times not (like below screen).
Any help will be greatly appreciated.
Thank you.
Using Report View Control

Hi siva9000,
As per my understanding, there is a report with image. When you run the report in report manager, it works fine. When you run the report using report viewer control, the image could not be displayed properly.
I tried to reproduce this issue on my local machine. However, the report works fine for me when configure a ReportViewer control for remote or local processing. According to your description, the report itself has no problem. The issue may be caused by browser
or third-party plug-in. To troubleshooting the problem, please refer to the following steps:
Please run the report using IE, since other browsers may have compatibility problems.
Open the Internet options of the IE and add the web site into trusted site in the Security tab.
Please check if you installed third-party plug-in to the browser.
For more information about Configuring ReportViewer for Remote Processing, please refer to the following document:
http://msdn.microsoft.com/en-us/library/ms252075(v=vs.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

Report Viewer 2012 and IE11 Height

I have a reportviewer control (local report) in a .ASPX page. When I test this page on IE11 the browser is ignoring the height that I give the control. I'm not trying to make the height of the report 100% or anything, I'm setting it to a
static value of 500px.
In all other browsers, including IE10, it works as expected (the report is 500px in height and I see a scollbar on the right). In IE11, it's as if I didn't set the height at all.
I've placed this report into a blank .ASPX page (to eliminate the possibility of some conflicting CSS from my master page). I've tried changing the values for AsynchRendering and SizeToReportContent as suggested but it does not help. I'm running
the latest version of the reportviewer distributable. Has anyone else had this issue?
FYI, If I use the IE Developer tools I can find a deeply nested DIV (inside of the DIV that has my 500px height) whose height is set to 100%. If I change that manually (using the dev tools) it makes the report behave as expected. I
could override the height of that div using CSS but the div's name (generated by the reportviewer control) is generated dynamically and this solution would fail eventually.
UPDATE
Viewing the page in Compatibility View fixes the height issue, but is not a viable solution for the site in which the control needs to reside.

Hello, do you have find a fix because I've the same problem for my users
We had upgrated from IE9 to IE11 and we are problems with scroll.....

SSRS Report Viewer 2012 Cancel Link on loading spinner not stopping SQL Query

Similar Messages

Maybe you are looking for