Stacked Column Chart drill down

I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
Wen

Hi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill

Similar Messages

  • Drill Down between 2 stacked column chart with multiple rows.

    Hi,
    Can anyone please help me.
    1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
    2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
    to achieve this,
    i'm using 2 stacked column charts and 1 lebel baseb menu.
    from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
    Becoz my data is multiple row for each quarter.
    please suggest me to achieve the drill down between 2 stacked column charts.
    assume that my data like below.:
    coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
    Region                Q2                Q3               Q4
    Other              3658              3497               497
    NA - North
    America                3               3               1101
    APJK     1     4     597
    UK               324
    EMEA North     1     1     288
    CORPORATE     1     5     215
    LA -
    Latin America1     2     208
    EMEA     1          199
    EMEA South     1     1     169
    Coulmns for 2nd coumn chart:  Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
    Region     Priority     Q2     Q3     Q4
    Other     D: End of Next Day     1568     1613     239
    Other     C: End of Day     983     893     119
    Other     A: 2 Hour     631     610     70
    Other     B: 4 Hour     396     318     56
    NA -
    North AmericaD: End of Next Day     2     2     514
    APJK     D: End of Next Day          3     297
    NA -
    North AmericaC: End of Day               284
    NA -
    North AmericaA: 2 Hour     1          170
    UK     D: End of Next Day               157
    APJK     C: End of Day     1     1     152
    Other     E: 3 - 5 Business Days     68     58     13
    EMEA North     D: End of Next Day          1     136
    CORPORATE     D: End of Next Day          4     107
    NA - North America     B: 4 Hour          1     104
    LA - Latin America     D: End of Next Day     1     1     86
    EMEA     D: End of Next Day               86
    UK     C: End of Day               85
    APJK     A: 2 Hour               79
    EMEA South     D: End of Next Day               72
    EMEA North     A: 2 Hour               69
    EMEA North     C: End of Day               56
    APJK     B: 4 Hour               55
    EMEA     C: End of Day     1          53
    LA - Latin America     C: End of Day               54
    UK     A: 2 Hour               49
    EMEA South     C: End of Day     1          44
    CORPORATE     A: 2 Hour          1     43
    CORPORATE     C: End of Day               44
    LA - Latin America     A: 2 Hour          1     42
    EMEA South     A: 2 Hour          1     32
    EMEA     B: 4 Hour               30
    UK     B: 4 Hour               30
    EMEA     A: 2 Hour               27
    EMEA North     B: 4 Hour     1          26
    NA -
    North AmericaE: 3 - 5 Business Days               25
    LA - Latin America     B: 4 Hour               23
    EMEA South     B: 4 Hour               20
    CORPORATE     B: 4 Hour               17
    APJK     E: 3 - 5 Business Days               13
    Other     F: 6 - 10 Business Days     6     4     
    Other     G: 11 - 20 Business Days     6     1

    Hi Srinivas,
    I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
    for mor details:
    1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
    if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
    somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
    Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

  • SharePoint PPS Hide null or blank value in performancePoint chart drill down.

    Hi,
    I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
    Thanks & Regards
    Poomani Sankaran

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • Help Creating Dynamic Stacked Column Chart with Multiple Criteria

    Hi all. Im new here and hoping you can help.  I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do.  I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode).  Anyway this is what the data table looks like
    Month         Year            Company      Positive #          Negative #         Neutral #          Positive %       Negative %      Neutral %
    October      2011            CompanyA      1234                1234                 1234                 10                    10                    10
    October      2011            CompanyB      1234                1234                 1234                 10                    10                    10
    October      2011            CompanyC      1234                1234                 1234                 10                    10                    10
    October      2011            CompanyD      1234                1234                 1234                 10                    10                    10
    November  2011            CompanyA      1234                1234                 1234                 10                    10                    10
    November  2011            CompanyB      1234                1234                 1234                 10                    10                    10
    November  2011            CompanyC      1234                1234                 1234                 10                    10                    10
    November  2011            CompanyD      1234                1234                 1234                 10                    10                    10
    December  2011            CompanyA      1234                1234                 1234                 10                    10                    10
    December  2011            CompanyB      1234                1234                 1234                 10                    10                    10
    December  2011            CompanyC      1234                1234                 1234                 10                    10                    10
    December  2011            CompanyD      1234                1234                 1234                 10                    10                    10
    The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column.  I know how to make a combo box work and I know how to make a stacked column chart work with static data.  I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data.  I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is.  It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values.  Any help would be greatly appreciated!

    Which connection you are using?
    IF quite difficult if you are working under static data.

  • In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?

    In the new Numbers, How can I get a 2D stacked column chart to display only 1 column?

    This is one of those things that I find really strange about Numbers 3. The control for what you want to do is not where anyone would expect to find it.
    Select the Chart
    Click on Edit Data References
    Look at the bottom left corner of the Numbers window. It should say "Plot Columns as Series" or "Plot Rows as Series"
    Click on it and change it to the other

  • Bubble Chart drill down issues

    I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
    The problem is with drill down
    I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
    But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
    However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
    1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
    2. All bubbles are of same color.
    Is it possible to overcome above two limitations when using data in range option?
    Thanks

    Hi Tarun,
    as a workaround you could define a special area as mapping area for the X-Y-chart.
    This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
    Hope this helps,
    best regards
    Heiko

  • Stacked Column Chart with Lines

    Requirement:
    User stacked Column chart to display data for defects for 4 departments.
    1 or 2 lines to show baseline for defects(constant).
    Is there anyway that I can do that just like we can create one in Excel?
    (stack a Stacked column chart with a line chart is not a solution.)
    Any advises?
    Thanks,
    Wen

    Hi Wen,
    I realise that you are not going to get this to work with a standard component on its own. I think it might be possible to acheive it with overlaying barcharts and combination charts.
    My assumption is that you are looking for something that has a stack with 3 separate items in it. Two target lines crossing over the stacked chart.
    I will have a look at this to see if I can come up with something. Let me know if this is not your requirement.
    No, I don't work for SAP. I think those that do have the SAP logo beside them.
    Regards
    Alan

  • Help - How do I Add a Trendline to a Stacked Column Chart??

    I have a stacked column chart (NOT a 100% stacked column chart) and need to add a line to show the year goal.  I can do this in Excel, but for some reason can't figure out how to do this in SSRS.  I read various tutorials, blogs and MSDN pages
    but nothing works.  The weird thing is that they all say that I should right-click on the chart and there should be a DATA tab...on the chart properties.  THERE IS NO DATA TAB, i'm here to tell you. I'm using SQL 2012 so not sure if that might make
    a difference.
    So how do I do this?
    Again, this can be done in Excel, don't understand why this isn't easier to do in SSRS.
    BTW, completely separate rant here, but it takes me 20 minutes every single time I want to log into MSDN forums.  It never seems to remember my password and I have to reset it, then jump through a bunch of security nonsense.  Anyone else have this
    problem?
    Thanks!!

    Hello,
    If I understand correctly, you want to add a line chart to display the Goal values in the stacked column chart. You can try to add the secondary field to the Values area and change the chart type to "Line". Both data field in the Values area
    shares the Category group and series group. Please refer to the following screen shot:
    If I have any misunderstanding, please post your report dataset with sample data for further analysis.
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here. 
    Fanny Liu
    TechNet Community Support

  • Add Total to Stacked Column Chart on the top and another important thing is the data are from SharePoint site

    the same with the following description from another question:
    "How can I display a total on top of each column on a stacked column chart (using
    reporting services 2008)? If I use Data Labels I can display the
    values for each part of the stack on a stacked column, but I want to be display the total.
    For Example: If I have stacked column on chart with a value of 10 for the 1st stack, 20 for the 2nd stack,
    and 20 again for the 3rd stack - I want to display 50 (the SUM total) as the data label on top of the entire column..."
    and a solution for this would create a new column named SUM(category group), this can be done with data source from SQL server, but my data is from SharePoint site list. its query seems can't be changed which means I can't add a SUM column.
    what should I do with this? Can anyone give me a hand?
    thank you very much.

    Hi sophiexu,
    If we want to display a total for each column on the top of a stacked chart, we can use a matrix control to display the column total value to work around this issue.
    The following thread about how to simulate chart legend is for your reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cfb4fa19-b2ba-426a-804b-b5ea83d70d62/ssrs-2008-chart-legend-missing-customitems-property
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Stacked column chart from XML data source

    I have an XML file, which lists elements with three
    attributes: date, inactive-interval, user-count.
    I need to build a stacked column chart with a single column
    for each distinct date, one stack for each distinct
    inactive-interval for that date, and the height of the stack equal
    to the user-count.
    I can define ColumnSeries with yField="user-count"
    xField="date", but I don't know how to partition the column into
    stacks by inactive-interval values.
    Here is a sample data set:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <data>
    <snapshot date="01/01/2007" inactive-interval="0"
    user-count="3"/>
    <snapshot date="01/01/2007" inactive-interval="7"
    user-count="2"/>
    <snapshot date="01/01/2007" inactive-interval="30"
    user-count="4"/>
    <snapshot date="01/02/2007" inactive-interval="0"
    user-count="4"/>
    <snapshot date="01/02/2007" inactive-interval="7"
    user-count="2"/>
    <snapshot date="01/02/2007" inactive-interval="30"
    user-count="3"/>
    </data>

    Your CategoryAxis id="ha_ccm" uses categoryField="period", and this is the label for the your series (i.e. "Quarter 4/2010"). You cannot have multiple categoryFields for the CategoryAxis; it can only use one data field for the labels. You can use data tips and/or label functions to show the individual series' values on the columns.
    Also:
    Your labelField in the ColumnSeries are set to a ColumnSet name instead of a field name in your dataprovider.
    Font must be embedded if you set ColumnChart.showLabelVertically="true".

  • Crystal Presentation Design - Stacked Column Charts in 2 axis

    Is it possible to create dual axis stacked column charts in Crystal Presentation design or Dashboard Design?
    Thanks.
    Stine

    Hi Stine,
    As of today we dnt have that feature in Xcelsius . In latest service pack 4( SP4 ) also this feature is not there.
    @Sri

  • Stacked Column Chart with Line

    Hi
    I need to Create a Stacked Column Chart representing 1 set of measures with a Line representing a target.
    I want to create a chart where the Sales Amount in different Sectors is represented as a stacked column and the targets are represenetd as a line.
    Currently BO supports Bar charts with line.
    Does anyone know if such a feature will be supported in the new release of BO XI. Also is it possible to raise a request for this feature to be included in the new release
    TIA

    We are also a 30 persons department (Marketing) using in the same BO charts (since 2001) quarters made of :
    - first single column ( 2014 billing in a query1)
    - second stacked column (2015 billing +2015  firm orders backlog, 2015 frame orders backlog in a query2)
    - third single column (2016 backlog in a query3)
    and a superposed budget line
    the first and the third column are offset respectively to the left and right of the second column by blank and dummy single columns of data called ghost1 and ghost2. 2016 is still empty here but the principle is clear.
    This principle is used liberally in 200 + different reports. Also with transparent columns and other complicated, but graphically intuitive reports.
    How can we continue to use this very natural representation of our several hundred million $ business. I have not found the mixed single column, stack column and line option in BO XI 3.1 . Please re-develop one asap if necessary. SAP should please please report asap on the recovery timeline of this lost feature. The switch from Visual Basic development to Java development should not lead to regression of any feature.
    Regards.
    Jean-Marc Imbert
    Marketing manager

  • How do you combine a stacked column chart with a clustered column chart

    Hello,
    I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
    Is that possible with BI Publisher?
    Thank you very much!
    Codruta Crisan

    Finally I get it myself:
    You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
    In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
    graphType="BAR_VERT_STACK2Y">
    <SeriesItems>
    <Series id="0" assignedToY2="false" color="#BBD6E7"/>
    <Series id="1" assignedToY2="false"/>
    <Series id="2" assignedToY2="true" color="#004A96"/>
    <Series id="3" assignedToY2="true"/>
    </SeriesItems>

  • Stacked column chart

    Hi to everybody.
    I was wondering if there is a possibility to do the following :
    On the stacked column charts you can show the value of each series. Is there a possibility to show for instance on the top the sum of the series.
    Thanks in advance
    Message was edited by: Series IIA

    I figured it out. It took special format/setup on the bex report side.
    thank you to all...

  • Stacked Column Chart Value does not show in Preview or SWF

    I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
    I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
    Edited by: Rich Krejsa on Apr 9, 2009 9:35 PM

    Hi Rich,
    Try to rebind the data with the component and preview and see.
    Also check with other charts to see if you get the same behaviour.
    Try placing a table component and display those cell and see what values are there when you preview.
    There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
    Let me know if this helps.
    Thanks,
    Amit Mathur.

Maybe you are looking for