Stacks in XI
Dear All,
How and what are the stacks available in XI?
Regards,
Ashish
Ashish,
XI has 2 stacks the Java/J2EE stack and the ABAP stack.
XI's heartbeat is the Integration Server. The Integration Server in turn consists of
1. Adapter Engine
2. Integration Engine
3. Business Process Engine.
The adapter engine runs on the J2EE stack and the Integration Engine and the Business Process Engine run on the ABAP stack.
All messages are processed in a consistent way in the Integration Engine through a series of steps called "Pipeline Steps" . Any message picked by the adapter engine running on the java stack is passed to the Integration Engine running on the ABAP stack and the messages are processed here.
Regards
Bhavesh
Similar Messages
-
Error while comitting a transaction in oSB. The following is the error stack
Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay -
Instalação de EHp3 + ultimo Stack (15) + últimos SP de HR (44)
Amigos, bom dia,
Estou realizando um projeto de instalação de EHp3 + ultimo Stack (15) + últimos SP de HR (44) disponíveis hoje para um ECC 6.0 montado sobre Solaris SPARC 10 e Oracle 10g.
O problema é o seguinte, montei um servidor de teste e realizei uma copia homogênea do sistema de PRD para poder evaluar o impacto e poder ter o tempo que o sistema estará em manutenção e sem acesso aos usuários. Como é um cliente que trabalha as 24hs, o sistema de PRD não pode estar fora do ar mais de 48hs como máximo (sábado e domingo), igualmente, este tempo para o cliente já é muito. Então estou precisando reduzir ao máximo os tempos de ajustes manuais da SPDD e SPAU.
Por isso a minha idéia é que no ambiente DEV a equipe funcional, ao momento de realizar os ajustes da SPDD e SPAU, gerem ordens de transportes para que ao momento de realizar a instalação em QAS e PRD, eu possa adicionar essas ordens através da SAINT e fazer uma só u201Cqueueu201D.
Alguém alguma vez fez algo pelo estilo? Já adicionaram ordens de transporte a SAINT? Estive vendo esta documentação:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/5a8c38e3494231e10000009b38f8cf/frameset.htm
Mas não me esclareceu as duvidas. Como a SAINT vai saber qual é a ordem relacionada aos ajustes da SPDD e aos ajustes da SPAU?
Alguém que possa me dar uma dica?
Muito obrigado,
Alejandro Olindo
SAP Basis Consultant -
How can I sync ONLY the top photo in the stack?
I sync various Aperture photo albums to my IPad and iPhone. The problem is that when I have 'stacked' images (eg. one image showing in the album and two other copies 'hidden' underneath), all of the photos in the stack are copied to the ipad and iPhone. So instead of seeing just one version of an image, I see as many as are in the stack. How can I sync ONLY the top photo in the stack?
Thanks for your help!I solved my own problem.
The sync problem seemed to only occur on smart albums. There is a new check box option in Aperture 3 when making a smart album: "sync stack pick only." One click and the problem is solved! -
Why do I need to declare "defaultButton" ? (In a component form part of view stack)
After doing some research and some help from FlexGuy in another thread, I realize that I need to make sure I have custom components initialized before accessing parts of the component. Just recently I was thrown for a long time when I tried to first click on a form field that was part of a component in my view stack, I'd get:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at mx.managers::FocusManager/focusInHandler()[C:\autobuild\galaga\frameworks\projects\framew ork\src\mx\managers\FocusManager.as:601]
With the debugger it's occuring in the focusInHandler method of FocusManager.as: (apparently _defaultButton is null.)
// restore the default button to be the original one
if (defButton && defButton != _defaultButton)
defButton.emphasized = false;
defButton = _defaultButton;
_defaultButton.emphasized = true;
This prompted me, on a whim, to delcare a defaultButton:
<mx:Form id="empForm" defaultButton="{submitButton}">
which refers to my submit button:
<mx:Button id="submitButton" click="submitEmployee()" label="{submitLabel}"/>
My question, is why is this necessary? In some examples I don't see this declared at all, but I seem to need it? (I'm calling creationPolicy="all" to make sure my components are initialized but I still seem to have to this defaultButton declared?)It's a way of proving that you are able to purchase content from that country's store i.e. that you have a valid billing address in it
From Why can’t I select None when I edit my Apple ID payment information? - Apple Support :
If you changed your country or region
When you change the country or region of an existing Apple ID, you must provide a payment method and update your billing options. If you want to remove your payment method after you change the country or region, you can change your payment information to None. -
Corrupt BT stack on Portege M200?
System was working OK with Microsoft BT stack but didn't support audio headset so I installed Toshiba stack.
Now have 3 problems:
1. System recognises mobile phone (Nokia 6260) and appears to pair but Nokia PC suite can't connect to the phone
2. System 'sees' headset (Nokia HDW3) but I get a (rather unhelpful) 'an error occured' dialog box when it tries to connect.
3. When shutting the system down, I now get an 'end program TosOBEX' dialog box.
Further attempts to uninstall / reinstall have no effect on any of the above.
Anyone got any ideas how to solve these issues? The TosOBEX point in particular leads me to suspect that the installation is somehow corrupted.
I've also tried to revert to the Microsoft stack but after removing the Toshiba stack and installing the BT monitor & rebooting, the system looks for Toshiba RFBus Driver. What do I need to do at this step to force it to install a Microsoft stack?Hi,
finaly I've found the solution for my problem. I don't know if it helps for the others, but it's very interesting.
Let's start at the begining.
* If you create a registry entry named EnableAPILog under HKCU\Software\Toshiba\BluetoothStack\V1.0\Mng\Log you can view the debugOutput with eg. DebugView.
* In the log I saw a lot of tries for creating COM port. Finaly just figured out how the TosOBEX works. After the process start, it will try to create several serial port for it's own services (as Bluetooth Local COM can display in normal case).
So the program calls the "CreateACOMport(x)" function, which returns with a failure. So the program jums back to the call again, next try may be OK. And this call-jump back-call-jump back-call ... will never end. The called function will use the kernel resources, so services.exe will eat all the CPU. (No any error message after x tries of "CreateACOMport" function ??? let's see in next release ;) )
*So checked DeviceManager, but it did not show any local serial port except the normal ones.
Microsoft published how to view the not connected devices (http://support.microsoft.com/kb/315539/EN-US/).
With this in 2 hours I deleted all serial ports from the "Ports" class. (Of course first I removed the Toshiba stack).
Toshiba stact reinstall & everything works fine.
that's all. -
Stack file that is generated does not contain any java components
We are in process of upgrading our ecc6.0 system with ehp4. The enhancement is stuck up in configuration phase for JAVA. Though we have configured Java in solution manager the stack file that is generated does not contain any java components and so the installation is stuck up. Kindly request you to advice us on this issue .
Attached is the 'Trouble Ticket Report', PREPARE_JSPM_QUEUE_CSZ_01.LOG, and SMSDXML_EA4_20100623144541.375.txt
++++
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: EA4
Hostname...........: wipro
Install directory..: e:/usr/sap/EA4
Upgrade directory..: F:\EHPI\java
Database...........: Oracle
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
More information can be found in the log file F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
++++++
PREPARE_JSPM_QUEUE_CSZ_01.LOG>>
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[F:\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jun 28, 2010 9:21:23 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml has finished.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jun 28, 2010 9:21:24 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack E:\usr\sap\trans\EPS\SMSDXML_EA4_20100625054857.968.xml contains no components for this system.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/06/28 09:21:23.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/06/28 09:21:24.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.781.
Jun 28, 2010 9:21:24 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
++++++++++++++++++++++
[stack xml data: version=1.0]
[SPAM_CVERS]
ST-PI 2005_1_7000006
LSOFE 600 0015
SAP_AP 700 0015
SAP_BASIS 701 0003
SAP_ABA 701 0003
SAP_BW 701 0003
PI_BASIS 701 0003
PLMWUI 700 0002
SAP_APPL 604 0002
EA-APPL 604 0002
SAP_BS_FND 701 0002
EA-IPPE 404 0002
WEBCUIF 700 0002
INSURANCE 604 0002
FI-CA 604 0002
ERECRUIT 604 0002
ECC-DIMP 604 0002
EA-DFPS 604 0002
IS-UT 604 0002
IS-H 604 0003
EA-RETAIL 604 0002
EA-FINSERV 604 0002
IS-OIL 604 0002
IS-PRA 604 0002
IS-M 604 0002
SEM-BW 604 0002
FINBASIS 604 0002
FI-CAX 604 0002
EA-GLTRADE 604 0002
IS-CWM 604 0002
EA-PS 604 0002
IS-PS-CA 604 0002
EA-HR 604 0005
SAP_HR 604 0005
ECC-SE 604 0002
[PRDVERS]
01200314690900000432SAP ERP ENHANCE PACKAGE EHP2 FOR SAP ERP 6.0 sap.com EHP2 FOR SAP ERP 6.0 -00000000000000
01200314690900000463SAP ERP ENHANCE PACKAGE EHP4 FOR SAP ERP 6.0 sap.com EHP4 FOR SAP ERP 6.0 -00000000000000
01200615320900001296 sap.com +00000000000000
01200615320900001469SAP ERP ENHANCE PACKAGE EHP3 FOR SAP ERP 6.0 sap.com EHP3 FOR SAP ERP 6.0 -00000000000000
01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01 +00000000000000
[SWFEATURE]
1 01200615320900001296SAP ERP 2005 sap.com SAP ERP 6.0: SAP ECC Server
19 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Discrete Ind. & Mill Products
20 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Media
21 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Utilities/Waste&Recycl./Telco
23 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Leasing/Contract A/R & A/P
24 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Retail
25 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Global Trade
26 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Supply Chain Mgmt
30 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Central Applications
31 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Strategic Enterprise Mgmt
33 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Human Capital Management
37 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas
38 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Catch Weight Management
42 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Public Sector Accounting
43 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Insurance
44 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Hospital
45 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ECC Server VPack successor
46 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: ERecruiting
47 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense & Public Security
48 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Financial Services
55 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Oil & Gas with Utilities
56 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: Defense
59 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: PLM Core
69 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: EAM config control
9 01200615320900003195EHP4 FOR SAP ERP 6.0_NW701 EHP4 FOR ERP 6.0_NW701 sap.com EHP4 FOR SAP ERP 6.0 / NW7.01: SAP ESA ECC-SE
++++++++++++++++Though we have configured Java in solution manager the stack file that is generated does not contain any java components
You will probably need to update Solution Manager first with a number of corrections so you can get a correctly generated stack file. Depending on your ST400 version in Solution Manager apply collective corrections from "Note 1461849 - MOpz: Collective corrections 24" or "Note 1452118 - MOpz: Collective Corrections 23". They generally deal with these kind of stack file issues.
Nelis -
EHP4 Upgrade ABAP+JAVA stack
Hi SDN Team,
We are in the proceess of EHP4 upgrade,now we are at the road map configuration where we got stuck,I is looking for JAVA sca files in XML file but could not found the same and it throw an error,
Trouble Ticket Log
===============
Trouble Ticket Report
Installation of enhancement package 1 for SAP NetWeaver 7.0
SID................: SE1
Hostname...........: NA00SAPSAND02
Install directory..: g:/usr/sap/SE1
Upgrade directory..: G:\EHPI\EHPI\java
Database...........: Microsoft SQL Server
Operating System...: NT
JDK version........: 1.6.0_07 SAP AG
SAPJup version.....: 3.4.29
Source release.....: 700
Target release.....: 700
Start release SP...: $(/J2EE/StandardSystem/SPLevel)
Target release SP..: $(/J2EE/ShadowSystem/SPLevel)
Current usages.....:
ABAP stack present.: true
The execution of PREPARE/INIT/PREPARE_JSPM_QUEUE ended in error.
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
More information can be found in the log file G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue
com.sap.sdt.ucp.phases.PhaseException
The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
PREPARE_JSPM_QUEUE
INIT
NetWeaver Enhancement Package Installation
SAPJup
Java Enhancement Package Installation
We have added the system in SMSY and download the stack properly and I could see SCA files listed in XML file but still iam stuck the above error
PREPARE_JSPM_QUEUE_CSZ_02
===========================
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[G:\EHPI\EHPI\java\log\PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!PATTERN[PREPARE_JSPM_QUEUE_CSZ_02.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been started.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypePrepareJSPMQueue.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter inputFile=EHPComponents.xml
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMQueuePreparatorFactory.createJSPMQueuePreparator(JSPMQueuePreparatorFactory.java:93) [Thread[main,5,main]]: Creating JSPM SP Stack queue preparator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.dialog.elim.DialogEliminatorContainer.canBeOmitted(DialogEliminatorContainer.java:96) [Thread[main,5,main]]: Dialog eliminator spStackDialogEliminator allows to omit dialog SPStackLocationDialog
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator RequiredFields.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.util.validate.ValidationProcessor.validate(ValidationProcessor.java:97) [Thread[main,5,main]]: Validatable parameter SP/STACK/LOCATION has been validated by validator SPStackLocationValidator.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:107) [Thread[main,5,main]]: Using SP Stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:488) [Thread[main,5,main]]: STACK-SHORT-NAME tag is missing. The CAPTION of the stack will be used as stack name.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseStackTag(SPXmlParser.java:582) [Thread[main,5,main]]: PRODUCT-PPMS-NAME tag is missing. The CAPTION of the product will be used as product PPMS name.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Warning]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) [Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This software feature will be skipped.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jul 27, 2010 3:48:22 AM [Error]: com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) [Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no components for this system.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase PREPARE/INIT/PREPARE_JSPM_QUEUE has been completed.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/07/27 03:48:22.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:00:00.141.
Jul 27, 2010 3:48:22 AM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
Not sure what to do now.please advise.
Regards
UdayHi Uday,
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP Learning Sol-Frontend CP - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Warning]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSoftwareFeatureStackTag(SPXmlParser.java:730) >[Thread[main,5,main]]: Software feature EHP4 FOR SAP ERP 6.0 / NW7.01 : SAP NW - Applic. Server Java - 05 (11/2009) >found in stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml is applicable for >system SID: ZSE and HOST: na00sapsand02, but the current system is SID: SE1 and HOST: NA00SAPSAND02. This >software feature will be skipped.
> Jul 27, 2010 3:48:22 AM [Info]: >com.sap.sdt.j2ee.tools.spxmlparser.SPXmlParser.parseSPXml(SPXmlParser.java:424) [Thread[main,5,main]]: Parsing of >stack definition file T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml has finished.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception >has occurred during the execution of the phase.
> Jul 27, 2010 3:48:22 AM [Error]: >com.sap.sdt.j2ee.phases.jspm.JSPMSpStackQueuePreparator.createQueue(JSPMSpStackQueuePreparator.java:136) >[Thread[main,5,main]]: The stack T:\EHP4_Downloads\SMSDXML_CROSSSYS_20100726091148.945.xml contains no >components for this system.
I can see in the log that stack xml you are using is not for the system to whom you are upgrading. That is the reason system is rejecting stack file. Please check above extract of logs.
I would suggest you to please generate stack xml file for this system from MOPZ after correctly configuring SMSY and use it. Then your problem will be resolved.
Thanks
Sunny -
Content, Tab & Stacked canvases contd...
I posted a question in the last week about putting a stacked canvas (say S) on a tab canvas(say T) and both of them on a contenct Canvas (say C). I was able to do that with valuable suggestions from gurus here.
Now my issue is as follows:
On my stacked canvas there are items from 3 different blocks (say B1,B2 & B3)along with scrollbars. This stacked canvas appears in the 1st tab of the tab canvas T. The form, now appears as if there are 2 sections: The top portion has items(store, city, state) belonging to STORE block. Bottom portion are the tab/stacked canvases.
I set the block STORE's navigation style property to 'Same Record'. The idea is when the user keys in a store (store field) or selects a store from the drop down list of stores, it should navigate to the next text item 'city'. However, it is not navigating to 'city' eventhough that is the next item in that block. I have a when validate item on the 'store' text item. Can I use "Go_ITEM('STORE.city')" in that WVI ? If not, then how do I make it navigate to the 'city' text item?
Thanks,
Chiru
Edited by: Megastar_Chiru on Dec 28, 2009 4:44 PMThere are three ways (at least i know of three) to manage navigation from one item to another one:
- If navigation should take place "inside" a block from one item to another one, put them in the appropiate order in the object-navigator. Also make sure, that the "destination item" has its Keyboard navigable property set to true.
- If navigation should take place "inside" a block from one item to another one, but you can't use the order in the object-navigator, use the properties "Next Navigation Item" and/or "Previous Navigation Item" at itemlevel to control the navigation.
- If navigation is conditional or should go to items in other block, use the KEY-NEXTITEM and KEY-PREVIOUSITEM-triggers and do a GO_ITEM('DESTINATION_ITEM'(; in it -
Improve Auto-Stack and Process Collections with user settings
I have read through all of the Bridge request discussions, and encountered a few comments on the stacking process but nothing to explain my critique and feature request. My apologies for any redundancy.
Bridge CS4 includes two features that would (virtually) streamline my entire photo-organization workflow. Brilliant! Except that they offer zero configuration and my default scenario is very different from Adobe's, so these two would-be-wonderful features are pretty much useless to me, and to anybody else who doesn't happen to shoot in the way the presets are configured.
The first feature is to automatically group images into stacks, based on their similarity, exposure settings, and timestamps. Unfortunately Bridge considers no minimum or maximum amount of photos per stack, and has a fixed timestamp window of 18 seconds. I shoot everything in three-exposure bursts and sometimes multiple shots in less than 18 seconds, so being able to say "process collections in 3-item stacks only" would be absolutely perfect. For other people, being able to limit the timestamp range or other min/max exposure options would work great.
The second feature, which could save me hours every week but is equally useless, is to automatically process collections in Photoshop. My biggest ire about this function is that it completely ignores stacks that I have manually created AND stacks that were previously created using the auto-stack feature. Every time this function is run, it re-runs the auto-stack process from scratch and then delivers the collections to Photoshop. Not only is this made useless by the previously mentioned inflexibility of the auto-stack process, but even if auto-stack worked perfectly, this would waste time by doing the entire thing again and denying the user the option to review the stacks before committing to the Photoshop processing. The process collections feature would also be much improved if the option were given to process ONLY panoramas or HDR photos, or auto-detect. I have never shot a panorama in my life and I'm sure plenty of people have never shot HDR, but Photoshop isn't capable of knowing our intentions and there's no reason why we shouldn't be able to instruct it.Agree. It is an interesting capability that falls short of being really useful. I feel like an ingrate to complain, but ...
I'd also like to see the capability to specify something than "Auto" for the panorama option. My experience is that most of my panos work best with "Cylindrical + Geometric Correction".
My experience is that once you get past 5+ images in a pano, it becomes very tedious ... and then 20+ images in rows is painful. Unlike a single image that you can quickly evaluate, with panos I find I need to make the pano to tell if it going to turn out. I have been generating smaller 1800x1200 or 1200x1800 files to speed up the evaluation process, but it is still very manual and tedious.
The Auto-Stack generates a AutoCollectionCache.xml, but I haven't found it workable to edit this. I'd like to be able to modify it to "force" my knowledge of what is in a group. It seems to check the time-stamp, and re-do the Auto-Stack, thus ignoring my changes. Sigh. -
Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.
jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby? -
Drill Down between 2 stacked column chart with multiple rows.
Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region Q2 Q3 Q4
Other 3658 3497 497
NA - North
America 3 3 1101
APJK 1 4 597
UK 324
EMEA North 1 1 288
CORPORATE 1 5 215
LA -
Latin America1 2 208
EMEA 1 199
EMEA South 1 1 169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region Priority Q2 Q3 Q4
Other D: End of Next Day 1568 1613 239
Other C: End of Day 983 893 119
Other A: 2 Hour 631 610 70
Other B: 4 Hour 396 318 56
NA -
North AmericaD: End of Next Day 2 2 514
APJK D: End of Next Day 3 297
NA -
North AmericaC: End of Day 284
NA -
North AmericaA: 2 Hour 1 170
UK D: End of Next Day 157
APJK C: End of Day 1 1 152
Other E: 3 - 5 Business Days 68 58 13
EMEA North D: End of Next Day 1 136
CORPORATE D: End of Next Day 4 107
NA - North America B: 4 Hour 1 104
LA - Latin America D: End of Next Day 1 1 86
EMEA D: End of Next Day 86
UK C: End of Day 85
APJK A: 2 Hour 79
EMEA South D: End of Next Day 72
EMEA North A: 2 Hour 69
EMEA North C: End of Day 56
APJK B: 4 Hour 55
EMEA C: End of Day 1 53
LA - Latin America C: End of Day 54
UK A: 2 Hour 49
EMEA South C: End of Day 1 44
CORPORATE A: 2 Hour 1 43
CORPORATE C: End of Day 44
LA - Latin America A: 2 Hour 1 42
EMEA South A: 2 Hour 1 32
EMEA B: 4 Hour 30
UK B: 4 Hour 30
EMEA A: 2 Hour 27
EMEA North B: 4 Hour 1 26
NA -
North AmericaE: 3 - 5 Business Days 25
LA - Latin America B: 4 Hour 23
EMEA South B: 4 Hour 20
CORPORATE B: 4 Hour 17
APJK E: 3 - 5 Business Days 13
Other F: 6 - 10 Business Days 6 4
Other G: 11 - 20 Business Days 6 1Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept. -
Help Creating Dynamic Stacked Column Chart with Multiple Criteria
Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month Year Company Positive # Negative # Neutral # Positive % Negative % Neutral %
October 2011 CompanyA 1234 1234 1234 10 10 10
October 2011 CompanyB 1234 1234 1234 10 10 10
October 2011 CompanyC 1234 1234 1234 10 10 10
October 2011 CompanyD 1234 1234 1234 10 10 10
November 2011 CompanyA 1234 1234 1234 10 10 10
November 2011 CompanyB 1234 1234 1234 10 10 10
November 2011 CompanyC 1234 1234 1234 10 10 10
November 2011 CompanyD 1234 1234 1234 10 10 10
December 2011 CompanyA 1234 1234 1234 10 10 10
December 2011 CompanyB 1234 1234 1234 10 10 10
December 2011 CompanyC 1234 1234 1234 10 10 10
December 2011 CompanyD 1234 1234 1234 10 10 10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!Which connection you are using?
IF quite difficult if you are working under static data. -
PI NFE com erro 92 / stack java caindo
Amigos,
A 2 meses estamos passando por um problema com o ambiente GRC PI NFE,
A 1 mes atru00E1s o Stack Java estava caido e apu00F3s tentar subir via SMICM e SAPMMC, constatei que o server0 demorava mais de 50 minutos para reportar o erro e abortar o start.
Atualizei o Java JRE para a versu00E3o j2sdk1.4.2_27-x64 sem sucesso.
Ao acessar o diretu00F3rio D:\usr\sap\SID\DVEBMGS00\j2ee\cluster\sever0 constatei uma grande lentidu00E3o pois havia uma grande quantidade de pequenos arquivos.
Via ferramente JAVA Configtool, criei um novo server (SAP NOTE 723909) , chamado server1 e o stack java subiu em 5 minutos.
Ontem, o cliente reclamou de falha de envio de email aos clientes, e ERRO 92 no monitor PI.
Foi verificado o mail gateway e estava tudo ok, entu00E3o solicitou um reboot no servidor PI/NFE
Antes de efetuar o reboot verifiquei que o server1 estava LOTADO de arquivos XML novamente, entu00E3o movi esses arquivos para uma area de backup, resetei o server e subi novamente.
Aparentemente esta tudo ok desde entu00E3o, poru00E9m sabemos que u00E9 um problema cronico que mais cedo ou mais tarde teremos novamente.
Pergunto: ERRO 92 tem haver com o numero de arquivos XML que estavam no diretorio do server0 e server1?
O ambiente u00E9:
Windows 2003 x64
Oracle 10.2Olá Fernando,
os arquivos XML são todos padronizados assim:
newPayload_2010-10-11 19.24.47.406.xml
E são as NFE sim.
Verifiquei hoje, a transação sxmb_moni -> Estatisticas de Processamento
Aparece o seguinte resultado:
Processing Statistics:
XML Messages with error = 109
- Manually canceled = 64
Unprocessed XML messages = 23.633
Correctly Processed XML Messages 375 992
Archives XML Messages = 0
XML Messages Flagged for Deletion = 0
Deleted XML Messages = 288067
Pergunta: Poderiam ser esses Unprocessed XML messages estão ligados aos emails que não foram enviados?
Obrigado pela atenção!
Maycon Leite
Campinas - SP -
Instalação JWS fora do Stack Java do PI
Senhores,
aqui no projeto a equipe BASIS resolveu instalar o EJB de assinatura digital SLL-NFE-JWS fora do stack java do PI, num WebAS Java específico para outras aplicações.
O basis subiu os certificados, deu permissão conforme o manual e etc, porém, na hora de rodar o assinador, tanto via WebServiceNavigator quanto via PI ele retorna Exception in method sign.
Olhando nos logs do java, o stacktrace deixa mais claro o problema:
com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method sign.
at com.sap.grc.nfe.dsig.DigitalSignatureLocalLocalObjectImpl0_0.sign(DigitalSignatureLocalLocalObjectImpl0_0.java:119)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com.sap.aii.af.service.resource.SAPSecurityResources
at com.sap.grc.nfe.dsig.core.XMLData.sign(XMLData.java:162)
at com.sap.grc.nfe.dsig.DigitalSignatureBean.sign(DigitalSignatureBean.java:127)
at com.sap.grc.nfe.dsig.DigitalSignatureLocalLocalObjectImpl0_0.sign(DigitalSignatureLocalLocalObjectImpl0_0.java:103)
... 26 more
O problema é, ele não tem os SoftwareComponents SAP XI AF Core e SAP XI Security Lib, que me parecem ser necessários para fazer acesso ao KeyStorage.
Qual seria o procedimento para tornar possível o funcionamento do JWS fora do stack Java do PI?
Quais componentes precisam ser instalados p/ este EJB funcionar neste Stack?Bom dia Jose Nunes,
Pra instalar o PI Adapter Framework você precisa instalar os componentes que mencionou SAPXIAFC e SAPXIAF e também os sda abaixo:
. aii_af_jmsproviderlib.sda
. aii_af_ra_ms_sonic_client.sda
Mensagem para SAP re: signature - Componente: SLL-NFE
Atenciosamente,
Fernando Da Ró -
Unique ID in ABAP stack across all Envrionment.
In ABAP Stack is there any table which uniquely identifies one interface mapping across all environments. The requirement is to get a unique ID in ABAP stack (this needs to be hard-coded in an ABAP mapping) which is common in all environment.
There is a table SXMSPFADDRESS which is the master table for addresses in XI i.e. Party, Service, Interface and namespace, and has key address id that is used at many places in XI runtime. But the addressID is different in different environment and hence cant be used.Hi,
maybe start with a description of the issue and we will try to help with some other idea ?
Regards,
Michal Krawczyk
Maybe you are looking for
-
Can't open downloaded ibooks on iPad
Can't open downloaded ibooks on iPad Brooks i was reading some days ago.
-
Get the index of the current line in use
Dear All, Well how can i get the index of the current line in use? this the code I am using : Dim i As Integer Set oBatchForm = SBO_Application.Forms.GetForm(Form_Id, 1) Set oMainMatrix = oBatchForm.Items.Item(Matrix_Id).Specific For i = 1 To oMainMa
-
When I select various image sizes using the Print Image function, how does Aperture change the resolution and/or number of pixels in my Aperture version to produce the printed image? I assume it keeps all pixels and fits them to whatever image size
-
How to put display on screensaver while still using the beamer?
How can i put my display on screensaver while still using the beamer? My beamer can be on for a long time, i would like to use my screensaver at the same time, but then the beamer screen also goes to screensaver. Is there a way to use just the beamer
-
TM poor performance especially in mail
I have used TM a couple of times when in mail and the performance is dreadfully slow. When in mail with a mailbox highlighted, I enter TM. It goes to the TM interface fine, but when I select a date, it takes about 2 min to get there. I can then resto