Stand alone VU meter

Does anyone know of a good stand alone VU mete. And/or does anyone now if Apple is ever going to bring back the VU meter in iTunes?

-> VU meter
Apple has not stated one way or the other.

Similar Messages

  • Etherchannel showing down (SD) and ports are in "I" stand alone state

    Hi,
    Netapp server is connected to switch 6500 via trunk.
    I configured a portchannel but it showing as down.take a look ar below output..
    interface Port-channel248
    description Netapp-server-1 po248
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 903
    switchport mode trunk
    switchport nonegotiate
    no ip address
    no shut
    interface GigabitEthernet3/33
    description server-1
      switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 903
    switchport mode trunk
    switchport nonegotiate
    no ip address
    speed 1000
    udld port aggressive
    spanning-tree portfast
    channel-group 248 mode active
    no shut
    interface GigabitEthernet4/33
    description cnndcfasp002a-e5d
      switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 903
    switchport mode trunk
    switchport nonegotiate
    no ip address
    speed 1000
    udld port aggressive
    spanning-tree portfast
    channel-group 248 mode active
    no shut
    Switch-6500#sh etherchannel summary
    Flags:  D - down        P - bundled in port-channel
            I - stand-alone s - suspended
            H - Hot-standby (LACP only)
            R - Layer3      S - Layer2
            U - in use      f - failed to allocate aggregator
            M - not in use, minimum links not met
            u - unsuitable for bundling
            w - waiting to be aggregated
    Number of channel-groups in use: 5
    Number of aggregators:           5
    Group  Port-channel  Protocol    Ports
    ------+-------------+-----------+-----------------------------------------------
    248    Po248(SD)       LACP      Gi3/33(I)  Gi4/33(I) 
    #sh etherchannel detail
    Group: 248
    Group state = L2
    Ports: 2   Maxports = 16
    Port-channels: 1 Max Port-channels = 16
    Protocol:   LACP
    Minimum Links: 0
                    Ports in the group:
    Port: Gi3/33
    Port state    = Up Sngl-port-Bndl Mstr Not-in-Bndl
    Channel group = 248         Mode = Active      Gcchange = -
    Port-channel  = null        GC   =   -         Pseudo port-channel = Po248
    Port index    = 0           Load = 0x00        Protocol =   LACP
    Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
            A - Device is in active mode.        P - Device is in passive mode.
    Local information:
                                LACP port     Admin     Oper    Port        Port
    Port      Flags   State     Priority      Key       Key     Number      State
    Gi3/33    SA      indep     32768         0xF8      0xF8    0x321       0x7D 
    Age of the port in the current state: 0d:02h:04m:58s
    Port: Gi4/33
    Port state    = Up Sngl-port-Bndl Mstr Not-in-Bndl
    Channel group = 248         Mode = Active      Gcchange = -
    Port-channel  = null        GC   =   -         Pseudo port-channel = Po248
    Port index    = 0           Load = 0x00        Protocol =   LACP
    Flags:  S - Device is sending Slow LACPDUs   F - Device is sending fast LACPDUs.
            A - Device is in active mode.        P - Device is in passive mode.
    Local information:
                                LACP port     Admin     Oper    Port        Port
    Port      Flags   State     Priority      Key       Key     Number      State
    Gi4/33    SA      indep     32768         0xF8      0xF8    0x421       0x7D 
    Age of the port in the current state: 0d:02h:04m:58s
                    Port-channels in the group:
    Port-channel: Po248    (Primary Aggregator)
    Age of the Port-channel   = 7d:16h:30m:16s
    Logical slot/port   = 14/3          Number of ports = 0
    Port state          = Port-channel Ag-Not-Inuse
    Protocol            =   LACP
    Any one please let me know what is the issue here...
    Thanks
    Gautham

    Exactly, the 6500 config is fine, probably the NETAPP is not active or passive and it's just ON that won't work
    show lacp 248 neighbor will show if you have a neighbor and if the LACP id is the same on both ports
    Core1#sh lacp 2 neighbor
    Flags:  S - Device is requesting Slow LACPDUs
            F - Device is requesting Fast LACPDUs
            A - Device is in Active mode       P - Device is in Passive mode
    Channel group 2 neighbors
    Partner's information:
              Partner Partner   LACP Partner  Partner   Partner  Partner     Partner
    Port      Flags   State     Port Priority Admin Key Oper Key Port Number Port State
    Gi1/7/10  SA      bndl      32768         0x0       0x1      0x11A       0x3D
    Gi2/7/10  SA      bndl      32768         0x0       0x1      0x31D       0x3D
    cheers

  • Stand alone labview application (.exe file) does not run properly

    Hi all,
    I am trying to make a stand alone labview application to run on another computer ( I have never done this before).
    I went through the tools->build application prompts and was able to build an exe file.
    the program is supposed to control a power meter and make power measurements then save them to a text file.
    When I run the exe file, on the same computer I compiled the exe file on, the program generates a text file to save data to but it can not communicate with the power meter.
    There are some sub-VIs and a dll file that are used to communicate with the power meter. Could it be that I am not telling labview to correctly
    include these files when I create an executable?
    What are some common problems that occur when generating stand alone applications that could be causing my issues?
    And does anyone know of any good tutorials on generating stand alone applications in labview other than the NI help files?
    Thanks for your help,
    Solved!
    Go to Solution.

    edCubed wrote:
    Hi Bill, thanks for your suggestions.
    I haven't tried to run this app on another computer yet. I'm just trying to run it on the computer it was developed on.
    The computer I developed it on has all the drivers/resources I need to control the power meter.
    Also, I don't know how to include the VISA runtime with my installer. could you explain how this is done?
    This is the first time IV tried to turn any labview programs into stand alone exe files so I don't anything about how to do it other than what I've seen in youtube videos and help files.
    If you know of any good tutorials that will help me figure this out I would appreciate it.
    Thanks,
    My fault - I didn't read that this was the same computer.  I know the very end of Core 3 studies shows how to build an executable and installer, but even that is very general.  I'm not sure if there exists a tutorial on how to do it.
    As for including the runtimes, when you build an installer, you have to include the runtimes that your executable will need.  It's fairly straightforward.
    Since it won't run on the machine that built it, I'll have to think about it a little bit...
    Bill
    (Mid-Level minion.)
    My support system ensures that I don't look totally incompetent.
    Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

  • How to build Vis in NI_AALbase​.lvlib to my Stand-alon​e applicatio​n?

    Hi, everybody.
    I met some problems while building the subVis of NI_AALbase.lvlib and NI_AALPro.lvlib into my stand-alone application.
    I use Labview 8.2 professional version and Windows xp OS.
    While I build the system contained example "Peak detection and display.vi" into stand-alone application, it succeeded in the local computer,and the exe program run correctly.
    Then I move the generated application files to another computer, where only the run-time engine 8.2  was installed.  However, some errors
    appeared during the running. The error message is "unable to load the front panel, error in loading 'NI_AALPro.lvlibeak detector.vi'  "
    It seems the "Peak detector" subvi in NI_AALPro.lvlib can not be found. Similar problems happened with the subvis in NI_AALbase.lvlib.
    I use the default configuration for Application Builder.  I donot know how to configure the Application Builder.
    Could you help me  to solve the problems?
    Thank you.
    Stephen

    An example of a non-vi support file might be an image that you are importing into your application. LabVIEW can obtain data from external files and perform LabVIEW functions on it.
    Thus, if you created an application that imported a file that is not a vi, you would include this in your support files.
    You can find out more about File I/O in the LabVIEW Help>>Fundamentals section.
    I hope this helps clarify things. Let me know if you have any more questions regarding this issue.
    Cheers,
    Emilie K. | Applications Engineer | National Instruments

  • Can't install Lightroom 5 on a second computer, I am NOT a creative cloud customer, I am a stand-alone user.  How do I enter my serial number???

    I can't install Lightroom 5 on a second computer, I am NOT a creative cloud customer, I am a stand-alone user.  But when I try to install on my laptop, it always trys to sell me the monthly membership.  How do I enter my serial number in the second copy of lightroom?  It won't ask me for it, and I cannot enter it anywhere in the settings?  I am stuck

    You probably downloaded the Cloud version.  Get the licensed version thru the following linked page...
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • Migrating stand alone programs to web based application

    Hi,
    I have a small application consisting of .class files. I created these using Swing components and it's based on Client/ server model where it accesses Oracle Database.
    I want to deploy these programs in Java App Server so that it can be accessed thru web browser.
    Please tell me how to do it.
    Thanks in advance.
    Rajeev.
    Message was edited by:
    Rajeev.Asthana

    If this was the thing, Sun, Microsoft and IBM
    wouldn't have even giving a thought of migrating
    legacy application (I'm talking about Mainframes and
    AS/400 here). If this kind of migration is possible,
    can't we migrate a java code from stand-alone
    "version" to web enabled.
    Migration is not really a term to use to for converting a stand alone application to a web application. Unless of course again you are prepared to turn it into an applet.
    The flow and control of a web application are entirely different from a stand alone app. You will not be able to reuse Swing GUI's from a web server. I don't know how to make that any clearer.
    Hopefully you have a good design for your existing application and you can relatively easily reuse your existing business logic components.

  • Need help in creating a web application that runs on a stand alone sys.

    I am planning a small java web application complete with database. I need to know if there are any ways to deploy that application on a stand alone system and that if there is any way to make an executable for that application so that the user need not go through the process of deploying the app and starting the server whenever he restarts the system. Can anyone help me in this regard? Thanks in advance.

    Hi Alex,
    Since I had a Gmail test servlet kicking around, I ran it on the latest V3 nightly build.
    On the first run, I encountered the following nested exceptions:
    javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465
    --> java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
        --> java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
            --> java.security.UnrecoverableKeyException: Password must not be nullThe UnrecoverableKeyException is a manifestation of [https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938|https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938]
    I worked around this by adding the following JVM config options to domain.xml
    <jvm-options>-Djavax.net.ssl.keyStorePassword=changeit</jvm-options>
    <jvm-options>-Djavax.net.ssl.trustStorePassword=changeit</jvm-options> (Note: the default master password is "changeit")
    These lines are placed in /domain/configs/config/java-config of domain.xml for the particular server config you're using. There's only one server config in the default domain.xml shipped with V3. Then restart the server.
    I retested the code on both port 465 and 587, with and without the above config changes. Without the change, they both fail the same way, and with the change, they both work. Let me know if this helps.
    -Peter

  • SAP PI Installation on Stand alone machine

    Hi,
    Thanks to one and all for having such a nice forum as it has answer to all the questions which I have posted.
    I have been given a very interesting work for anlying if SAP PI could be installed on a standalone machine without having any SAP box. My requirement is to install SAP PI tool for non SAP integration.
    I will distribute my question in 2 parts
    1. Can I install SAP PI in a stand alone desktop?
    2. Is is important to have a SAP R/3 system to install SAP PI tool?
    Please do share your thoughts and if possible please share the document which could be used as proof.
    Thanks in advance.
    Gautam

    1. Can I install SAP PI in a stand alone desktop?
    Yes.
    2. Is is important to have a SAP R/3 system to install SAP PI tool?
    No.
    If you are trying to install 7.1 then have a look at the video blog (easily available on SDN) for the same....will help you.
    Regards,
    Abhishek.

  • Recording Stand-alone Soft Synths & Virtual Instruments in Audition 3

    Hi People,
    Have a little problem which I'm struggling to figure out.
    I have been using Cool Edit Pro for several years. My set up has always enabled me to record any standalone Software Synths via my sound card. I have always had it set up so my sound card plays through patch one and records through another patch enabling me to record in the multi track editor with no problems at all and my set up records only the soft synth/instrument, and not any waves previously recoded. Instead just plays them back so I can build up my music and play along at any given time. Although this is a rather different approach to doing things, it suites me down to the ground and I'm happy to create this way
    My problem has come upon whilst trying out the new Adobe Audition 3, which is based around ASIO Drivers. Because of this I can no longer run another program (Stand alone soft synth), because Adobe hogs the ASIO driver and will not allow another program to be run at the same time. I can use the Adobe windows driver for audition no problems and I am able to continue recording how I did with Cool Edit, but I would much prefer to go along with auditions ASIO drivers to make sure I am recording with the best quality and reliability.
    My Sound card is an E-MU 1616 with breakout box. I have tried numerous ways with the patch mixer to get around this, for example I have tried using my sound cards driver for audition and ASIO4ALL2 for my soft synths. One of which is Hypersonic 2, and the other being SampleTank. I cannot for the life of me get my set up and running how it was with cool edit.
    I must admit that although I have played around with my settings, it could be something simple I need to do that just hasn't jumped out at me yet. My evaluation of Audition 3 runs out in 20 days and I'm almost sure that there is a way to enable my set up to work how I want it to before I can go out and buy Audition 3. I'm very comfortable with audition 3, naturally. I love the changes and extra features it has now along from the cool edit days.
    I have looked into other solutions as well after scouring message boards, one of which was Cycling 74 Soundflower, this sounded like it could be an answer but unfortunately it is Mac only. If Adobe did Audition for Mac then I wouldn't hesitate in going down that route...
    My other solution is to have a second computer, either a modified mid range P C, or even a Mac, to act as my synth station and have my various software synths and such running on there and playing out to my recording PC with Audition on. This would free up the ASIO to be used by Audition solely. It's a long way around but wouldn't cost the earth and would be a simple enough idea to set up. But surly, I shouldn't need to go this far out to get my ideal setup.
    Anyhow, I would much appreciate any advice and ideas to help me solve this problem; I will keep working at it in the mean time.
    Hope my explanation makes sense above, I can appreciate that there are other ways like just going along with another program and such, but in all honesty I like the way I work and don't really want to move on, I'm more bothered about just getting on and recording new ideas in the environment I'm so use to. I love the way Cool Edit/Audition works for me and I have developed my own methods with the software over the years. Working with just audio suits me to the ground as I record and chop up my own Guitar bass and drums, along with sounds from my field recorder and a host of other methods and ideas.
    Thanks in advance

    Hi!
    As long as your softsynths comes in the VSTi format (most of them do now), you can insert it on a track in Audition, which has 'host' capabilities from V3.
    In the Multitrack, insert a new MIDI track from the 'Insert' menu (note: MIDI Track, not just 'MIDI').
    On that track pane hit the 'Sequencer' button, and it will open in a separate window. In the pane left of the keyboard you can insert your VSTi of choice, and make your MIDI connections.
    Back on the Main track pane, engage the 'L' button for Live monitoring. Actual recording (of MIDI) is done in the Sequencer window.
    The usual, and recommended workflow is to keep the MIDI tracks 'open', i.e. you can edit the sound in your instrument and even the notes played at any time in the process, compiling the actual audio as the last step in the mixing.
    If you kind of 'insist' on doing it the old way, you can export the audio from your recorded MIDI+VSTi creations track by track like this: Leave the Sequencer window open, make a selection in the multitrack that covers the time span you have played. Solo the track (will mute all others), and use File / Export Audio Mixdown. Use 'Master' as the source. This will give you a wave rendering of what's currently in the MIDI sequencer. Qualitywise this is better since it's all internal and digital instead of in/out of soundcards with DA/AD conversion etc.
    I haven't found a method for a 'live' wave recording while you play, but there may be one...
    If you purchase Audition it comes with Help files explaining this in more/better detail. ;)

  • Download LR 5.5 as stand-alone

    Hi,
    I am using LIghroom 5.4 and have heard about the updated version 5.5 which I would like to download and install as it worked fine since I started using LR as from version 3.
    I want to use it as a stand-alone program and have no interest to join the Adobe cloud.
    How and from where can I download the latest update without installing the cloud desktop software?
    Update:
    found the solution myself:
    I went to the download page , pressed on the the windows version of LR 5.5 (german in my case). This opened up a text page with links. Here you scroll down (press page down couple of times) until you see Downloads, and here you press "Proceed to download" which will download the 920 MB exe file on the local harddrive.
    I got frustrated because I missed that I had to scroll down so far, so all I ended up a couple of times was the cloud installer.
    For amateurs this is not the way how I will continue. I will stick to LR as long as it is offered as a stand-alone program. I am not willing to go into the cloud and make it a cash cow for adobe....
    best regards,
    Matthias Brand

    You don't need to be attached to the cloud constantly for the newer versions to work. They only have to connect once every four months or so. I believe they also offer enterprise/government versions that don't require a connection at all, but you would have to contact Adobe sales to find out about that. Also, you can pay in yearly increments instead of monthly (and there may be more options for government versions).
    The only perpetual licenses you can get are for CS6 and equivalent versions, but nothing newer.

  • Using a Mac Mini Server as a traditional stand alone desktop

    Hello all, currently I have a late 2008 model 17" MacBook pro, Time Capsule, Apple TV and an Iphone 3GS and Ipod Traditional. I would like to add a desktop system to coordinate all of these items, to be the centerpiece is you will, in my home. I'm interested in buying a mac mini, I began to do research however and saw the Mac Mini Server which has greater memory capacity 4GB vs 2GB RAM, and dual 500Gb vs the standard Mac Mini which has one at 320GB. I would like to take advantage of these upgrades as I'm a writer and will be constantly on the web for work as well as likely keep a lot of items on the hard drive.
    However I noticed the Mac Mini server utilizes Mac OSX snow leopard SERVER as opposed to the user grade Mac OSX. *My question is if the Mac Mini Server with MAC OSX server can still be used as a stand alone desktop, connecting it to a spare LCD television I have and a mac wireless keyboard/mouse?*
    I'm aware that unlike the other mac mini and imacs it does not come with ilife and other pre-installed software, and *I want to know if it's still possible to purchase after market and install said software utilizing them in the traditional manor?*
    Thank you in advance for any feedback you can provide and I apologize if my question was difficult to comprehend due to my lack of computer knowledge. I also apologize if this question is similar to others you've received lately as I did a quick scan of google and these forums and did not seem to find the specific answer I was looking for.

    Welcome to the Apple Discussions!
    Let me clear up a misperception that you have. Both the Mac mini and the Mac mini Server have a capacity to address 8 GB of RAM. There are two SO-DIMM slots in each model. The mac mini comes preconfigured by Apple with 2 GB of RAM (2 x 1 GB). The mini Server comes preconfigured with 4 GB of RAM (2 x 2 GB). You can buy and install yourself up to 8 GB of RAM (2 x 4 GB).
    You can even install Mac OS X Snow Leopard client, which will meet your needs a bit better than Server, now that folks have figured out how to do it;
    http://discussions.apple.com/thread.jspa?threadID=2539663&tstart=0
    And yes you can buy and install iLife, and pretty much everything else that you want to include in your kit. Either model of mini works fine with wireless keyboards and mouses. If your LCD TV has an HDMI port, then a simple HDMI to HDMI cable would be the simplest manner to connect it to the mini.
    Dah•veed

  • HT201485 My iphone won't let me download apps and refers me to my computer for verification. My computer will not access itunes due network issue. How to make iphone stand alone for downloads & updates.

    In iTunes my iPhone refers me to iTunes on my computer for verification. iTunes won't work on my computer. How can both my iPhone and iPad stand alone?

    Turns out that when my iPod Touch was restored, the restrictions had been turned ON for Facebook and several other apps. This is what was preventing the Facebook app from accessing my Camera Roll for picture downloads. This is odd since all of my iPod backups would not have had those settings turned on. This is also the first time this has occurred given the few times I've had to restore my iPod Touch.
    Anyway if you experience the same behavior from your iPod or iPhone with iOS 8.0.2, just go to the General settings and review your settings under Restrictions. Once you set them to allow for changes, you should be back in business.

  • Ive uploaded firefox 4 and now I cant access messenger from the browser, it say unavailable, but it works as a stand alone prog.. cant find a setting to reactivate.. Please advise TY!

    Im on Win 7 Ultimate and had Firefox working fine with messenger in the browser & could use the pop up chat box. Since the upload I get the message that messenger is currently not available, but it works fine when I activate it as a stand alone prog. but I want it back in my browser.. cant find any setting or pref. to activate it... have cleared cache and history, restarted, even reloaded a messenger from Windows essencials.. no difference.. it been like this for 5 days since the update.. anyone got a solution? thanks alot for your help.

    DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034

  • Calling a web service through SSL via a stand alone java class

    HI,
    I am trying to call a web service through SSL via a simple stand alone java client.
    I have imported the SSL certificate in my keystore by using the keytool -import command.
    Basically I want to add a user to a group on the server. Say I add a user user 1 to group group 1 using an admin userid and password. All these values are set in an xml file which I send to the server while calling the server. I pass the web service URL, the soap action name and the xml to post as the command line arguments to the java client.
    My xml file(Add.xml) that is posted looks like :
    <?xml version="1.0" encoding="UTF-8"?>
    <SOAP-ENV:Envelope
    xmlns:xsi = "http://www.w3.org/1999/XMLSchema-instance"
    xmlns:SOAP-ENC = "http://schemas.xmlsoap.org/soap/encoding/"
    xmlns:SOAP-ENV = "http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:xsd = "http://www.w3.org/1999/XMLSchema"
    SOAP-ENV:encodingStyle = "http://schemas.xmlsoap.org/soap/encoding/">
    <SOAP-ENV:Body>
    <namesp1:modifyGroupOperation xmlns:namesp1 = "/services/modifyGroup/modifyGroupOp">
    <auth>
    <user>adminUser</user>
    <password>adminPassword</password>
    </auth>
    <operationType>ADD</operationType>
    <groupName>group1</groupName>
    <users>
    <userName>user1</userName>
    </users>
    </namesp1:modifyGroupOperation>
    </SOAP-ENV:Body>
    </SOAP-ENV:Envelope>
    I call the client as:
    java PostXML https://com.webservice.com/services/modifyGroup "/services/modifyGroup/modifyGroupOp" Add.xml
    I my client, I have set the following:
    System.setProperty("javax.net.ssl.keyStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
    System.setProperty("javax.net.ssl.keyStorePassword", "password");
    System.setProperty("javax.net.ssl.trustStore", "C:\\Program Files\\Java\\jre1.5.0_12\\lib\\security\\cacerts");
    System.setProperty("javax.net.ssl.trustStorePassword", "password");
    But when I try to execute the java client, I get the following error:
    setting up default SSLSocketFactory
    use default SunJSSE impl class: com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
    class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl is loaded
    keyStore is : C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
    keyStore type is : jks
    keyStore provider is :
    init keystore
    init keymanager of type SunX509
    trustStore is: C:\Program Files\Java\jre1.5.0_12\lib\security\cacerts
    trustStore type is : jks
    trustStore provider is :
    init truststore
    adding as trusted cert:
    init context
    trigger seeding of SecureRandom
    done seeding SecureRandom
    instantiated an instance of class com.sun.net.ssl.internal.ssl.SSLSocketFactoryImpl
    main, setSoTimeout(0) called
    main, setSoTimeout(0) called
    %% No cached client session
    *** ClientHello, TLSv1
    RandomCookie: GMT: .....
    Compression Methods: { 0 }
    [write] MD5 and SHA1 hashes: len = 73
    main, WRITE: TLSv1 Handshake, length = 73
    [write] MD5 and SHA1 hashes: len = 98
    main, WRITE: SSLv2 client hello message, length = 98
    [Raw write]: length = 100
    [Raw read]: length = 5
    [Raw read]: length = 58
    main, READ: TLSv1 Handshake, length = 58
    *** ServerHello, TLSv1
    %% Created: [Session-1, SSL_RSA_WITH_RC4_128_MD5]
    ** SSL_RSA_WITH_RC4_128_MD5
    [read] MD5 and SHA1 hashes: len = 58
    [Raw read]: length = 5
    [Raw read]: length = 5530
    main, READ: TLSv1 Handshake, length = 5530
    *** Certificate chain
    chain [0] = ...
    chain [1] = ...
    chain [2] = ...
    chain [3] = ...
    main, SEND TLSv1 ALERT: fatal, description = certificate_unknown
    main, WRITE: TLSv1 Alert, length = 2
    [Raw write]: length = 7
    0000: 15 03 01 00 02 02 2E .......
    main, called closeSocket()
    main, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    main, called close()
    main, called closeInternal(true)
    main, called close()
    main, called closeInternal(true)
    main, called close()
    main, called closeInternal(true)
    Exception in thread "main" javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.c
    ertpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
    at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
    at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
    at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
    at java.io.BufferedOutputStream.flushBuffer(Unknown Source)
    at java.io.BufferedOutputStream.flush(Unknown Source)
    at org.apache.commons.httpclient.methods.EntityEnclosingMethod.writeRequestBody(EntityEnclosingMethod.java:506)
    at org.apache.commons.httpclient.HttpMethodBase.writeRequest(HttpMethodBase.java:2110)
    at org.apache.commons.httpclient.HttpMethodBase.execute(HttpMethodBase.java:1088)
    at org.apache.commons.httpclient.HttpMethodDirector.executeWithRetry(HttpMethodDirector.java:398)
    at org.apache.commons.httpclient.HttpMethodDirector.executeMethod(HttpMethodDirector.java:171)
    at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:397)
    at org.apache.commons.httpclient.HttpClient.executeMethod(HttpClient.java:323)
    at PostXML.main(PostXML.java:111)
    Caused by: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find v
    alid certification path to requested target
    at sun.security.validator.PKIXValidator.doBuild(Unknown Source)
    at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
    at sun.security.validator.Validator.validate(Unknown Source)
    at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
    at com.sun.net.ssl.internal.ssl.JsseX509TrustManager.checkServerTrusted(Unknown Source)
    ... 18 more
    Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(Unknown Source)
    at java.security.cert.CertPathBuilder.build(Unknown Source)
    ... 23 more
    I do not know where I have gone wrong. Could someone point out my mistake.
    Thanks In advance!

    Hi jazz123,
    There's an example in the [*Java Web Services Tutorial*|http://java.sun.com/webservices/docs/2.0/tutorial/doc/] : see Chapter 1: Building Web Services with JAX-WS - A Simple JAX-WS Client.

  • Problems building a stand alone application with LV 8.6.1.

    I'm having problems building  a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed.  For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not  see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
    Thank you,

    are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
    you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
    another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution......... 
    Message Edited by Anil Reddy on 09-25-2009 01:22 PM
    Anil Punnam
    CLD
    LV 2012, TestStand 4.2..........

Maybe you are looking for