Stand by database at same node

Hi,
I tried to configure a Data Guard. both primery and Standby databases are configured at same node but i am facing problems when trying to open standby database in read only mode i get the following error
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'D:\D:\ORACLE\ORADATA\CHILDDB\SYSTEM01.DBF'
i am using version 9.2.01
Zaka

Hi,
There is error in the datafile location it shows D:\D:\, check your control file.
Regards
Anurag

Similar Messages

Add database to same node

Hi,
I just migrate from oracle 8.1.7 to 9.2 running on Win2k server.
I have 3 databases on the same server. Currently I can only use the OEM to admin. one database.
I can see all databases when launch the console in standalone mode, but only one through Oracle Management server mode.
1)Is there a way to add additional db to the same node?
2)If each node only allow one DB, How do I add additional node to the same repository, on the same server?
Your help greatly appreciated.
Thanks

This is what you need to do in addition to what the other guys told you.
1. If DB has same name and port then you can not add
2. To force discoverery go to $HOME/network/admin and there are two files like this "snmp_rw" one is input and another is output.
3. Edit the input file and include your missing database entries.

How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

Hi,
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5
RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
Thanks in Advance..

Hi;
Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
DB : 11.2.0.2
OS : RHEL5I had similar issue, what i did
1. Used source oracle_home on standby server
2. Created new asm instance and use same naming
3. I took RMAN full backup on source and move it to target
4. I edit initora file remove RAC setting and restore db(also edited listener file)
Regard
Helios

Logical and Physical Standby on same Node

Is it possible to have a logical and physical standby database for a primary database on the same node (i.e. primary on NodeA, logical and physical database of primary on NodeB)?
Will there be any conflicts with data guard broker with this configuration or any problems I may encounter?

From a technical point of view this is possible. Your standby node should be powerful enough to handle 2 instances. For even higher availability 3 dedicated nodes would be better. When Node B is down, both physical and logical standby are also down.
Werner

Can we have Multiple Instance on same Node in Oracle 10g RAC

Hi All,
I am planning to implement the RAC in Oracle 10g.Before that i have one doubt regarding RAC.
My question is "Can we create multiple Instance on Same node(Server) ?"
is it possible.
Any ideas or thoughts would be apperciable.
Thanks in Advance.
Anwar

This is where it is important to keep the separation between 'database' and 'instance'.
A database is the set of files that contains the data (and the redo, control files, etc). A database does nothing by itself, other than take up lots of disk space.
An instance is theCPU cycles (running software) and the memory to control the database.
In Oracle RAC, you can have as many instances controlling one database [at the same time] as you want (within reason). Each instance must be able to access the disk(s) that contains the database.
These multiple instances can be on the same computer (effectively taking up a lot of server memory and CPU for nothing) or they can be on separate computers.
If they are on separate computers, the disk subsystems must be able to be shared across computers - this is occasionally done using operating system clusterware and is the main reason why clusterware is required at all. (This is also the toughest part of the pre-requisites in setting up a RAC and is very vendor dependent unless you use ASM.)
These instances need a communication connection to coordinate their work (usually a separate network card for each computer) so they do not corrupt the disk when they are trying to access the same file, and possibly the same block, at the same time.
In a RAC configuration, instances can be added, started, running, stopped and removed independent of each other (allowing a lot of high availability) or can be started and stopped as a group.
Each instance gets it's own SID, which is in no way any different than a non-RAC SID. It's just the name of a service that can be invoked. The neat thing is that the SID
a) helps the DBA keep things straight by lettiung us talk about 'instance A' (the Oracle software to be running over on computer A) vs 'instance B' when starting, stopping and managing;
b) helps the application by providing targets that can be listed in the TNSNAMES.ORA [against one service alias], which is used by ORacle Networking to provide automated load balance or failover (instance/SID a is not available, I guess I'll try the next in the list)
Hope that helps the concept level a bit.

9i and 10g in the same nodes

Hi.
I would like to know if it's possible to have two database in different versions (9i and 10g) in the same nodes.
In this case, I suppose that I have to install the tow clusterware, one for 9i and another one for 10g, haven't I?
Thanks!

Hi,
both your assumptions are correct.
You can have a 9i RAC database and a 10g one both in the same cluster. However, you would need to have 10g Clusterware and another cluster software for the 9i RAC. On Linux and Windows Oracle would use the Oracle Cluster Manager (CM) for the 9i RAC, on all other platforms you would need to get a third party cluster software for the 9i RAC database, since the 10g Clusterware cannot serve as the underlying cluster software for the 9i RAC database. Nevertheless, the 10g Clusterware GSD would be used to manage the 9i RAC database in those combinations.
Thanks.

12.1.3 EBS single node 11.2.0.3 database to 2 node RAC with ASM

Hi,
We are planning to convert single node local/ordinary file system 11.2.0.3 database to 2 node RAC with ASM.
Please help me in creating the roadmap for the same.
e.g
1. Create the shared raw file system
2. Create diskgroup for ASM
3.. Convert the local file system to ASM first
etc, etc
This is the first big task hence need expert guidance.

Please refer to:
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 823587.1)
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap (Doc ID 1072636.1)
Thanks,
Hussein

Restore RMAN Backup in Different Database on Same RAC

We have 11gR2 2 node RAC on Linux. ASM and OMF is used for database. The database on it is backedup using RMAN.
We want to test the RMAN backup by restoring it to a new database on same server.
Can someone guide me to steps on how this can be achieved. I'm afraid this should not affect the actual database.
Thanks a lot.

Hi,
Yes, this can be done without disturbing your source db. Need more information on your DB structure (datafile asm diskgroups), all you need to do is restore as single node and convert to rac, since you want to test rman restore, you can restore to single node to prove your RMAN backups are intact.
Changes in init.ora
==============
db_file_name_convert= ("source dir structure","target dir structure")
log_file_name_convert=("source dir structure","target dir structure")
cluster_database=false
event="10298 trace name context forever, level 32"
_no_recovery_through_resetlogs=TRUE
Set new database sid (export ORACLE_SID=NEW_SID)
sql>startup nomount;
rman auxiliary /
rman>duplicate database to "NEW_SID" backup location "Your RMAN Backup location";
The above are very high level general steps, please do take other steps into consideration as per your environment.

Upgradation of Primary (RAC) two node database and single node standby DB

We have our primary setup in Oracle RAC in 10g R2 (10.2.0.1.0) in HP UX 11i 64bit (PA RISC). It is a two node RAC.
And we have a single node standby database (DR).
Both the primary and standby database are existing in 10.2.0.1.0
We need to upgrade the primary and standby database from 10.2.0.1.0 to 10.2.0.4.0
Am planning to go through the DBUA method for upgrading the database.
I like to know is there any special cases for upgrading both the primary and standby database.
since as i mentioned i will upgrade the database through dbua method, and if i upgrade my standby database as same as primary,
will it forcefully open the database, because while we upgrade the database through dbua it will open the database at the end of installation.
Is it possible to upgrade the standby database with DBUA method even when my standby database is in Mount state.
I will be helpfull if anyone has done this earlier, are there any know issues and is there any good document which i can refer.
with regards
A.Aravind

hi,
thanks for your reply, and i was following the document.
I like to know that is it mandatory to create a new Oracle Home for upgrading from 10.2.0.1.0 to 10.2.0.4.0
or i can proceed the installation of software in the same oracle home.
I will list out my action plan, please correct me if am wrong,
In Primary RAC,
a) Shutdown the database
b) Shutdown the asm instance
c) Stop the nodeapps services
d) Stop the cluster ready services.
e) Stop the enterprise manager
f) Stop the isqlplus
In Standby single node database,
1)Cancel the managed Recovery process
2) shutdown the database
3) Shutdown the asm instance.
PATCHING Process
g) Apply the oracle clusterware patch 10.2.0.4.0 in the same old existing ORA_CRS_HOME
h) Apply the oracle database software patch 10.2.0.4.0 in the same old existing ORACLE_HOME
Note: In my case both the ORACLE_HOME and ASM_HOME are in the same location.
i) Execute dbua to update the database in the primary database.
j) Apply the 10.2.0.4.0 patch in standby database ORACLE_HOME where as ORACLE_HOME and ASM_HOME are in the same location
k) Copy the recently generated archive logs from primary to standby manually and apply in standby database.
l) Mount the database in standby
m) Start the Managed recovery process.
with regards
A.Aravind

Compare Table Data on 2 different databases having same schema

I need to compare data in all the tables in 2 different databases having same schema.
If there is any difference in data in any table on Database1 and Database2 then I need to update/insert/delete the rows in my table in Database2.
So Database1 is my source database and Database2 is my sync database. I cannot use expdp tables as I am not having sufficient privileges to the database server.
Also I cannot drop and recreate the tables as they are huge.
Can anyone please guide me how to compare data and to write a script to comapre the changes in say Database1.Table1 and Database2.Table1 and then accordingly do inserts/updates/deleted on Database2.Table1?
Thanks

Karthick_Arp wrote:
Do you have a DBLink? If youes you can do this.
1. Login into the Database-2 and run this code.
begin
for i in (select table_name from user_tables)
loop
execute immediate 'truncate table ' || i.table_name;
end loop;
end;This will empty all the tables in your Database-2. Now what you need is to just populate the data from Database-1This might result in error, if any of the tables have referential integrity on them.
From 10g documentation :
Restrictions on Truncating Tables
You cannot individually truncate a table that is part of a cluster. You must either truncate the cluster, delete all rows from the table, or drop and re-create the table.
You cannot truncate the parent table of an enabled referential integrity constraint. You must disable the constraint before truncating the table. An exception is that you can truncate the table if the integrity constraint is self-referential.
If a domain index is defined on table, then neither the index nor any index partitions can be marked IN_PROGRESS.I would go for normal MERGE. Also change the cursor to select table names by first modifying the child tables and then the parent table.

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

Creation of Standby database on same host

Hi All,
I am using oracle 9.2.0.1.0 on windows XP machine.
*I want to create the standby database for my primary database on same machine.
But both tha data base is heaving diff instance as well as the diff database name say "ASHU" for primary & "TEST" for standby database.
I took the backup of all datafile and copied it in the standby location.
Generate the standby control file also and copied to the standby location.
But when i am going to start the standby database it is giving the below error:
SQL> startup nomount;
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
SQL> alter database mount standby database;
alter database mount standby database
ERROR at line 1:
ORA-01103: database name 'ASHU' in controlfile is not 'TEST'
How to rectify it? Please help me
(* This is only for learning pupose , that's why i am going to create both on same host"

>
SQL> alter database mount standby database;
alter database mount standby database
ERROR at line 1:
ORA-01103: database name 'ASHU' in controlfile is not 'TEST'
How to rectify it? Please help me
>
You do not change the dbname of the physical standby database. They always must have the same name as the primary.
Here is a snippet from my standby initialization file for a 9i installation. Notice the parameter LOCK_NAME_SPACE that was replaced in 10g with DB_UNIQUE_NAME
db_file_name_convert=('E:\PRIMA','E:\PHYST')
db_name='PRIMA'
instance_name='PHYST'
service_names='PHYST'
lock_name_space='PHYST'
log_archive_dest_1='LOCATION=E:\PHYST\ARCHIVE'
log_archive_start=TRUE
log_archive_format='%t_%s.arc'
log_file_name_convert=('E:\PRIMA','E:\PHYST')Kind regards
Uwe
http://uhesse.wordpress.com
Edited by: Uwe Hesse on 27.07.2009 13:36

My battery runs low very fast (three hours). I looked in the usage settings and it seems the time for usage and stand-by are the same, allthough i did have my iphone on stand-by!! What can i do?

Community,
I have a problem with my iphone 4. Every few months my battery starts draining within a few hours. I have tried all kinds of battery saving tips, but they don't help. When i go to the settings/general/usage is can see that the time for Usage and Stand-by are the same, so my phone is fully on all the time this explains the draining. But in reallity i turn my phone to stand-by most of the time, i mean the screen is black and all???
The first and second time a had this problem, both a few months a part, i restored my phone and it was solved. This time i restored my phone but this did not help!! And restoring my phone every two months is not my preferd way of solving this problem.
Does anybody have an idea on how to solve this problem? can anybody help me?
best regards,
Merijn

Restoring is the answer. It sounds as if there is a rogue process constantly draining your battery.
The issue you face is that, if you restore your backup thereafter, you risk the problem coming straight back with your files.
Store your files individually and it is time to start fresh.

Cloning of database to same host give error, unable to re-create online log

clone the database to same host
oracle version: 9.2.0.5
os HP
target db: tardb
catlog catlog
auxiliary: auxbr
After running this script, I am getting error unable to re-create online log.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/08/2009 23:17:38
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00344: unable to re-create online log '/db/app/oracle/product/9.2.0.5/dbs/ /db
/redolog.001/catalog1/catalog1_log1.rdo'
ORA-27040: skgfrcre: create error, unable to create file
HP-UX Error: 2: No such file or directory
I tried to shutdown, and mount, recover with backup contorlfile until cancel. and open with reset logs ,
I am not able to make the copy of the database on same host.
Help is appreciated.
complete error log
oracle@dimondz{auxbr}/db/app/oracle/dba/sql> sqlplus '/as sysdba'
SQL*Plus: Release 9.2.0.5.0 - Production on Mon Jun 8 23:11:23 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to an idle instance.
SQL> startup nomount pfile='/db/app/oracle/admin/catlog/pfile/initauxbr.ora';
ORACLE instance started.
Total System Global Area 219115512 bytes
Fixed Size 737272 bytes
Variable Size 83886080 bytes
Database Buffers 134217728 bytes
Redo Buffers 274432 bytes
SQL> create spfile from pfile='/db/app/oracle/admin/catlog/pfile/initauxbr.ora';
File created.
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
oracle@dimondz{auxbr}/db/app/oracle/dba/sql>
oracle@dimondz{auxbr}/db/app/oracle/dba/sql> rman
Recovery Manager: Release 9.2.0.5.0 - 64bit Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> connect catalog rman/rman@catlog
connected to recovery catalog database
RMAN> connect target sys/dimondz@tardb
connected to target database: tardb (DBID=3063303886)
RMAN> connect auxiliary sys/dimondz@auxbr
connected to auxiliary database: auxbr (not mounted)
RMAN>
RMAN> RUN
2> {
3> SET NEWNAME FOR DATAFILE 1 TO '/db/catalog1.001/oradata/system01.dbf';
4>
5> SET NEWNAME FOR DATAFILE 2 TO '/db/catalog1.001/oradata/undotbs01.dbf';
6>
SET NEWNAME FOR DATAFILE 3 TO '/db/catalog1.001/oradata/ptest01.dbf';
7> 8>
9> SET NEWNAME FOR DATAFILE 4 TO '/db/catalog1.001/oradata/users_01.dbf';
10>
11> SET NEWNAME FOR DATAFILE 5 TO '/db/catalog1.001/oradata/drsys_01.dbf';
12>
13> SET NEWNAME FOR DATAFILE 6 TO '/db/catalog1.001/oradata/qms_dat_01.dbf';
14>
15> SET NEWNAME FOR DATAFILE 7 TO '/db/catalog1.001/oradata/ultradat_01.dbf';
16>
17> SET NEWNAME FOR DATAFILE 11 TO '/db/catalog1.001/oradata/xmltbs_01.dbf';
18>
19> DUPLICATE TARGET DATABASE TO auxbr
20>
21> pfile=/db/app/oracle/admin/catlog/pfile/initauxbr.ora
22> logfile
23> ' /db/redolog.001/catalog1/catalog1_log1.rdo' size 5m,
24> ' /db/redolog.003/catalog1/catalog1_log2.rdo' size 5m,
25> ' /db/redolog.002/catalog1/catalog1_log3.rdo' size 5m;
26> }
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting Duplicate Db at 08-JUN-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=11 devtype=DISK
printing stored script: Memory Script
set until scn 229907626;
set newname for datafile 1 to
"/db/catalog1.001/oradata/system01.dbf";
set newname for datafile 2 to
"/db/catalog1.001/oradata/undotbs01.dbf";
set newname for datafile 3 to
"/db/catalog1.001/oradata/ptest01.dbf";
set newname for datafile 4 to
"/db/catalog1.001/oradata/users_01.dbf";
set newname for datafile 5 to
"/db/catalog1.001/oradata/drsys_01.dbf";
set newname for datafile 6 to
"/db/catalog1.001/oradata/qms_dat_01.dbf";
set newname for datafile 7 to
"/db/catalog1.001/oradata/ultradat_01.dbf";
set newname for datafile 11 to
"/db/catalog1.001/oradata/xmltbs_01.dbf";
restore
check readonly
clone database
executing script: Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 08-JUN-09
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backupset restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to /db/catalog1.001/oradata/system01.dbf
restoring datafile 00002 to /db/catalog1.001/oradata/undotbs01.dbf
restoring datafile 00003 to /db/catalog1.001/oradata/ptest01.dbf
restoring datafile 00004 to /db/catalog1.001/oradata/users_01.dbf
restoring datafile 00005 to /db/catalog1.001/oradata/drsys_01.dbf
restoring datafile 00006 to /db/catalog1.001/oradata/qms_dat_01.dbf
restoring datafile 00007 to /db/catalog1.001/oradata/ultradat_01.dbf
restoring datafile 00011 to /db/catalog1.001/oradata/xmltbs_01.dbf
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/dump/DBA/RMAN/tardb_bkup/db_tardb_f_04kgt77h tag=WHOLE_DATABASE_tardb params=NULL
channel ORA_AUX_DISK_1: restore complete
Finished restore at 08-JUN-09
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "auxbr" RESETLOGS ARCHIVELOG
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 907
LOGFILE
GROUP 1 ' /db/redolog.001/catalog1/catalog1_log1.rdo' SIZE 5242880 ,
GROUP 2 ' /db/redolog.003/catalog1/catalog1_log2.rdo' SIZE 5242880 ,
GROUP 3 ' /db/redolog.002/catalog1/catalog1_log3.rdo' SIZE 5242880
DATAFILE
'/db/catalog1.001/oradata/system01.dbf'
CHARACTER SET UTF8
printing stored script: Memory Script
switch clone datafile all;
executing script: Memory Script
datafile 2 switched to datafile copy
input datafilecopy recid=1 stamp=689037446 filename=/db/catalog1.001/oradata/undotbs01.dbf
datafile 3 switched to datafile copy
input datafilecopy recid=2 stamp=689037446 filename=/db/catalog1.001/oradata/ptest01.dbf
datafile 4 switched to datafile copy
input datafilecopy recid=3 stamp=689037446 filename=/db/catalog1.001/oradata/users_01.dbf
datafile 5 switched to datafile copy
input datafilecopy recid=4 stamp=689037446 filename=/db/catalog1.001/oradata/drsys_01.dbf
datafile 6 switched to datafile copy
input datafilecopy recid=5 stamp=689037446 filename=/db/catalog1.001/oradata/qms_dat_01.dbf
datafile 7 switched to datafile copy
input datafilecopy recid=6 stamp=689037446 filename=/db/catalog1.001/oradata/ultradat_01.dbf
datafile 11 switched to datafile copy
input datafilecopy recid=7 stamp=689037446 filename=/db/catalog1.001/oradata/xmltbs_01.dbf
printing stored script: Memory Script
set until scn 229907626;
recover
clone database
delete archivelog
executing script: Memory Script
executing command: SET until clause
Starting recover at 08-JUN-09
using channel ORA_AUX_DISK_1
starting media recovery
channel ORA_AUX_DISK_1: starting archive log restore to default destination
channel ORA_AUX_DISK_1: restoring archive log
archive log thread=1 sequence=3
channel ORA_AUX_DISK_1: restoring archive log
archive log thread=1 sequence=4
channel ORA_AUX_DISK_1: restored backup piece 1
piece handle=/dump/DBA/RMAN/tardb_bkup/db_arch_tardb_f_06kgt7ih tag=ARCHIVE_LOG_tardb_BACKUP params=NULL
channel ORA_AUX_DISK_1: restore complete
archive log filename=/oradump/oradata/catlog/arch/catlog-1231663410_1_3.arc thread=1 sequence=3
channel clone_default: deleting archive log(s)
archive log filename=/oradump/oradata/catlog/arch/catlog-1231663410_1_3.arc recid=1 stamp=689037447
archive log filename=/oradump/oradata/catlog/arch/catlog-1231663410_1_4.arc thread=1 sequence=4
channel clone_default: deleting archive log(s)
archive log filename=/oradump/oradata/catlog/arch/catlog-1231663410_1_4.arc recid=2 stamp=689037447
media recovery complete
Finished recover at 08-JUN-09
printing stored script: Memory Script
shutdown clone;
startup clone nomount pfile= '/db/app/oracle/admin/catlog/pfile/initauxbr.ora';
executing script: Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 219115512 bytes
Fixed Size 737272 bytes
Variable Size 83886080 bytes
Database Buffers 134217728 bytes
Redo Buffers 274432 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "auxbr" RESETLOGS ARCHIVELOG
MAXLOGFILES 5
MAXLOGMEMBERS 5
MAXDATAFILES 100
MAXINSTANCES 1
MAXLOGHISTORY 907
LOGFILE
GROUP 1 ' /db/redolog.001/catalog1/catalog1_log1.rdo' SIZE 5242880 ,
GROUP 2 ' /db/redolog.003/catalog1/catalog1_log2.rdo' SIZE 5242880 ,
GROUP 3 ' /db/redolog.002/catalog1/catalog1_log3.rdo' SIZE 5242880
DATAFILE
'/db/catalog1.001/oradata/system01.dbf'
CHARACTER SET UTF8
printing stored script: Memory Script
catalog clone datafilecopy "/db/catalog1.001/oradata/undotbs01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/ptest01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/users_01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/drsys_01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/qms_dat_01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/ultradat_01.dbf";
catalog clone datafilecopy "/db/catalog1.001/oradata/xmltbs_01.dbf";
switch clone datafile all;
executing script: Memory Script
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/undotbs01.dbf recid=1 stamp=689037456
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/ptest01.dbf recid=2 stamp=689037456
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/users_01.dbf recid=3 stamp=689037456
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/drsys_01.dbf recid=4 stamp=689037457
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/qms_dat_01.dbf recid=5 stamp=689037457
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/ultradat_01.dbf recid=6 stamp=689037457
cataloged datafile copy
datafile copy filename=/db/catalog1.001/oradata/xmltbs_01.dbf recid=7 stamp=689037457
datafile 2 switched to datafile copy
input datafilecopy recid=1 stamp=689037456 filename=/db/catalog1.001/oradata/undotbs01.dbf
datafile 3 switched to datafile copy
input datafilecopy recid=2 stamp=689037456 filename=/db/catalog1.001/oradata/ptest01.dbf
datafile 4 switched to datafile copy
input datafilecopy recid=3 stamp=689037456 filename=/db/catalog1.001/oradata/users_01.dbf
datafile 5 switched to datafile copy
input datafilecopy recid=4 stamp=689037457 filename=/db/catalog1.001/oradata/drsys_01.dbf
datafile 6 switched to datafile copy
input datafilecopy recid=5 stamp=689037457 filename=/db/catalog1.001/oradata/qms_dat_01.dbf
datafile 7 switched to datafile copy
input datafilecopy recid=6 stamp=689037457 filename=/db/catalog1.001/oradata/ultradat_01.dbf
datafile 11 switched to datafile copy
input datafilecopy recid=7 stamp=689037457 filename=/db/catalog1.001/oradata/xmltbs_01.dbf
printing stored script: Memory Script
Alter clone database open resetlogs;
executing script: Memory Script
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/08/2009 23:17:38
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-00344: unable to re-create online log '/db/app/oracle/product/9.2.0.5/dbs/ /db
/redolog.001/catalog1/catalog1_log1.rdo'
ORA-27040: skgfrcre: create error, unable to create file
HP-UX Error: 2: No such file or directory
RMAN>
I tried to shutdown and open with resetlogs , it still error
oracle@dimondz{auxbr}/db/app/oracle/dba/sql> sqlplus '/as sysdba'
SQL*Plus: Release 9.2.0.5.0 - Production on Mon Jun 8 23:27:05 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.5.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.5.0 - Production
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 219115512 bytes
Fixed Size 737272 bytes
Variable Size 83886080 bytes
Database Buffers 134217728 bytes
Redo Buffers 274432 bytes
Database mounted.
SQL> recover database until cancel using backup controlfile;
ORA-00279: change 229907626 generated at 06/06/2009 11:58:09 needed for thread
1
ORA-00289: suggestion : /oradump/oradata/catlog/arch/catlog-1814470384_1_5.arc
ORA-00280: change 229907626 for thread 1 is in sequence #5
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-00344: unable to re-create online log '/db/app/oracle/product/9.2.0.5/dbs/
/db/redolog.001/catalog1/catalog1_log1.rdo'
ORA-27040: skgfrcre: create error, unable to create file
HP-UX Error: 2: No such file or directory
SQL>
Thanks, Your help and guide will appreciated very much.

Hello,
The directory for the creation of the logfiles does not exist, from the error:
RMAN-06136: ORACLE error from auxiliary database: ORA-00344: unable to re-create online log '/db/app/oracle/product/9.2.0.5/dbs/ /db
/redolog.001/catalog1/catalog1_log1.rdo'
ORA-27040: skgfrcre: create error, unable to create file
HP-UX Error: 2: No such file or directoryI.e., there is no such directory as *'/db/app/oracle/product/9.2.0.5/dbs/ /db/redolog.001/catalog1/catalog1_log1.rdo'*
Your db_recovery_file_dest parameter may be set here, therefore change this:
'/db/redolog.001/catalog1/catalog1_log1.rdo' size 5m,
' /db/redolog.003/catalog1/catalog1_log2.rdo' size 5m,
' /db/redolog.002/catalog1/catalog1_log3.rdo' size 5m;To this:
'catalog1_log1.rdo' size 5m,
'catalog1_log2.rdo' size 5m,
'catalog1_log3.rdo' size 5m;And try again.

Can we locate oracle 9i and 10g databases in same PC

hi all
wish U happy new year...
I have installed oracle 9i and 10g database ..but 10g database is not working it says TNS protocol adapter error or invalied username password...I stpeed the 9i services and listner in the 9i home...but 10g database is not working.9i and 10g databases are in two different partitions....
I want to know is it possible to running 9i and 190g database in same PC...if it's possible pls can you give me a solution for my problem
regards
Buddhike

when I was trying to up the database it is looking for another listener
and massage coming listener is not running...Not clear. The database does not look for a listener, maybe you got that error when trying to connect ?
Do you have a listener 10g service ? Did you start it ? If not, please try the following :
C:\> set ORACLE_HOME=<Your 10g Home>
C:\> set PATH=%ORACLE_HOME%\bin;%PATH%
C:\> lsnrctl start
wait up to a minute, then execute
C:\> lsnrctl status
and post the result.

Stand by database at same node

Similar Messages

Maybe you are looking for