Standar Report Column missing in Apex 5.0.

Standard Report Column is missing in Apex 5.0. How to work with apex_item which required display type to be Standard Report Column?

Hi Rupesh,
Rupesh Gupta wrote:
Standard Report Column is missing in Apex 5.0. How to work with apex_item which required display type to be Standard Report Column?
Check this similar old thread : APEX_ITEM.CHECKBOX2 issue in apex 5
Regards,
Jitendra

Similar Messages

Substitution string used in custom Report column name does not display in PDF version of report

I am using Apex 4.2.6.00.03, Apex Listener 2 via Glassfish4 and have set up all my applications and reports on this system. We previously used Oracle 10.2, with Apache with a custom fopping document.
My issue is that I have a report that has custom column headings using a substitution string to pull in the begin or end date for the report. When the report is run and displayed, the column headings appropriately display the date. However, when I try to set up the Print to PDF option, the column headings are not displaying correctly.
Is it possible to use a substitution string in the column heading? I am able to use the substitution string in the Page Header and Page Footer and those display correctly.
In the Report Attributes setup I have set the "Strip HTML" to Yes and I have four columns that are using the &"ITEM NAME". string. See below for actual display:
The report column headings in APEX displays correctly (bold is the substitution detail):
Fund Account Description Balance 07/01/2014 Budget/Goal FY 14-15 YTD Actual 02/28/2015 Ending Balance 02/28/2015
In the Print Attributes setup, when I get to the Report Columns section, the Heading column displays the headings as set up in the Report Attributes custom and I am not able to edit these names. See below:
In the version of the report that is Printed to PDF I get the following for display:
Fund Account Description Balance %26amp;P347_BEGIN_DATE. Budget/Goal %26amp;P347_FY. YTD Actual %26amp;P347_END_DATE. Ending Balance %26amp;P347_END_DATE.
Any assistance would be greatly appreciated.
Thanks,
Pat

First, the misspelled word is a test object and not data.
Second, all data display correctly.
Third, text object is displaying the old misspelled word.
Fourth, I have eliminated the possibility that problems in of my pdf export routine cause this issue by exporting directly from Crystal Reports Viewer. I print the report to the crystal report viewer. The report looks good. The text object is spelled correctly. Then I click the Crystal Reports viewer's export button in the left upper corner and I export to both EXCEL and PDF. The excel export looks good. The pdf export is misspelled. All the export occurs internally in Crystal reports.
Fifth, I found outthat all users who have this problem have the ADOBE PDF writer installed. I am just suspicious that ADOBE writer is interferring with Crystal export
Sixth, I cannot recreate this problem on any of our development and test machines. It only happens on end-user laptops.
Seventh, I changed the name of the report that had this problem and created a new version and installed on end-user laptop. The behaviour still persists. User saved the report as both RPT and PDF. RPT export looks good. PDF version has the spelling problem. Data on both reports is up-to-date and good. I copied the same RPT export to my PC and exported it to PDF, the pdf looks good. That is why I think something on the end-users laptops is causing the export to use some cached template.
One more thing I did was to change the report name in VB.NET project, recreated a new package and installed on end-user's laptop. The same exact problem is still there.
I have worked with Crystal Reports more than 15 years and I have never such a weird behaviour before. I know this sounds very weird. We are all baffled by what is happening.

Calling a .rdf report from a link on a apex report column

Hi,
I want to call a xxx.rdf report from a link on a apex report column.
Can anyone help me on this ?
Best regards,
JCN

Hi,
Sorry - I should have read a bit further in your last post!
The url variable that you're defining should just be the URL string that you want to create, so you only need the "http://........" part. There's also a + missing after the "&TODT..." string.
The "DEA_PERMIT_ID=&G_PERMIT_ID." part at the end should have an & at the start to indicate a new parameter in the URL. Otherwise, &G_PERMIT_ID. would be replaced by the value stored in the session for the G_PERMIT_ID item (presumably that is an Application Item?).
So:
function callPopup()
var url = "'http://snapper.accsp.org/reports/rwservlet?destype=cache&desformat=PDF&report=edr_landings_dollars_by_vessel.rdf&userid=evtr_report/chicken99@safis&FROMDT=" + $v("P810_FROM") + "&TODT=" + $v("P810_TO") + "&DEA_PERMIT_ID=&G_PERMIT_ID.";
popupURL(url);
}Andy

Apex 2.2: Reorder report columns

The new reorder report columns under Report Attributes in Apex 2.2 is great, much faster than 2.0 where each column up/down needs a page refresh.
Small request: If I have 25 columns in a report region and I want to move the 20th column to the 5th position, I have to click-click-click the Up arrow on the 20th column until it is in the desired position. While doing all this clicking, since the row re-ordering is so slick, I sometimes tend to lose track of which row I am moving!
Instead, how about a UI like http://htmldb.oracle.com/pls/otn/f?p=24317:33
Clicking on a up/down arrow highlights the row and as long as the same row is moved up/down, it stays highlighted (serving as the visual aid I need). If you start moving a new row, that is "remembered" and highlighted.
Comments?
Thanks
[Sorry for not posting this as a comment on the Apex 2.2 feedback app, I wanted to see if others agree, thus strengthening my case. Hopefully the Apex team will include this feature in 2.2]
P.S: Of course, drag and drop to reorder these rows would be the next logical feature instead of all this silly clicking around! ;-)

OK I added this to the feedback app under Missing Features.
Just for completeness, here is how this is implemented.
The column with the 2 arrows is a derived column with the following HTML Expression
< img src="/i22/htmldb/icons/up_arrow.gif"
     style="cursor:pointer;cursor:hand;"
     onclick="doUp(this)"
>
< img src="/i22/htmldb/icons/down_arrow.gif"
     style="cursor:pointer;cursor:hand;"
     onclick="doDown(this)"
>The Javascript functions are defined in the Region Header as
<script>
var g_last_row=false;
function doDown(pThis)
    var l_tr=html_CascadeUpTill(pThis,'TR');
    if (g_last_row && g_last_row==l_tr) html_RowHighlight(l_tr,'pink');
    else if (g_last_row) {
        html_RowHighlightOff(g_last_row);
        html_RowHighlight(l_tr,'pink');
    else html_RowHighlight(l_tr,'pink');
    g_last_row=html_RowDown(pThis);
function doUp(pThis)
    var l_tr=html_CascadeUpTill(pThis,'TR');
    if (g_last_row && g_last_row==l_tr) html_RowHighlight(l_tr,'pink');
    else if (g_last_row) {
        html_RowHighlightOff(g_last_row);
        html_RowHighlight(l_tr,'pink');
   else html_RowHighlight(l_tr,'pink');
   g_last_row=html_RowUp(pThis);
</script>I am sure the code can be refactored to be more concise/clever, I just whipped this up in 15 minutes.
Thanks

How to display special characters in APEX Classic Report column

Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21

876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
<span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach...

How to create a fixed-width column within an APEX 4 interactive report?

This thread is a follow-up to {message:id=9191195}. Thanks fac586.
Partial success: The following code provided by fac586 limits the column width of the Apex 4 interactive report column as long as the column data contains whitespace within a Firefox 3.6 browser:
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
</style>
</pre>
Notes:
1. The code above is put into the HTML header section for the page.
2. T_DESCRIPTION is defined as VARCHAR2(2000).
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I tried adding "float: left;":
<pre class="jive-pre">
<style type="text/css">
th#T_DESCRIPTION {
width: 300px;
td[headers="T_DESCRIPTION"] {
width: 300px;
word-wrap: break-word;
<font color="red"> float: left;</font>
</style>
</pre>
Notes:
1. "float: left;" does not require whitespace and successfully splits the column between characters in lieu of whitespace.
2. "float: left;" shrinks the cell height and allows the page background to show through... couldn't determine how to fix this.
3. The code above works within the Firefox 3.6.12 browser but does not work within the Internet Explorer 7.0.5730.13 browser.
I've done some more research, but I still haven't discovered how to create a fixed-width column within an APEX 4 interactive report that displays properly within an Internet Explorer 7 browser.
Any ideas and help will be appreciated.

Thanks for your help with this!
<pre class="jive-pre">
what theme are you using?
</pre>
A customized version of theme 15.
<pre class="jive-pre">
Floating a table cell makes no sense (to me anyway).
</pre>
You are correct. I was just trying a different approach ... trying to think out of the box.
<pre class="jive-pre">
Think you'll need to create an example on apex.oracle.com with sample data
if there are any further problems.
</pre>
Great suggestion! The code your provided works in the Firefox 3.6.12 browser, but still doesn't work within my Internet Explorer 7.0.5730.13 browser.
UPDATE:
I have recreated the problem at apex.oracle.com, you can use the following information to check it out:
URL: http://apex.oracle.com/pls/apex/f?p=43543:100::::::
Workspace: IR_FIXED_WIDTH_COLS
Username: GUEST
Password: Thx4help
Application: 43543 - CM_RANDY_SD
Note: Table name is TEST_DATA
The following code provided by fac586 works in both Firefox 3.6 and IE7 using default theme "21. Scarlet" at apex.oracle.com; however, it doesn't work when I use a copy of our customized theme "101. Light Blue":
<pre class="jive-pre">
<style type="text/css">
.apexir_WORKSHEET_DATA {
th#T_DESCRIPTION {
width: 300px;
max-width: 300px;
td[headers="T_DESCRIPTION"] {
max-width: 300px;
word-wrap: break-word;
</style>

</pre>
Any idea what in the theme could be causing the fixed width column to be ignored in IE 7?
Edited by: CM Randy SD on Dec 7, 2010 11:22 AM

URGENT Printing a BI publisher report from a column link in APEX

I am developing an APEX report with a column link that will call a BI publisher report, the case is the link column in the APEX report will pass the item number to the BI publisher query.
At the moment this is what I am doing:
1- Create a hidden item on top of page zero. (e.g. PARAM1_VALUE)
2- Create a report query and a report layout (For BI Publisher) in the Shared Components. (e.g ITEM_REPORT)
3- Include the state session in the report query and reference that item in the query. (e.g. SELECT * FROM items where item_number = :PARAM1_VALUE)
4- Create an APEX report displaying orders with the item number as a link column.
5- In the Link column I set the report URL request to be "PRINT_SERVER=ITEM_REPORT".
6- In addition I set the PARAM1_VALUE to be #ITEM_NUMBER# on the link.
When I press on the link the BI publisher report prints but it doesn't display anything except the Headers, my understanding is that PARAM1_VALUE is not set with the item_number value when I press on the link and thus the query returns no results as when I remove the condition from the query i can see the report printing.
Please help as this is urgent

I opened the session and it is there with a proper value, it appears that whenever I enable the inclusion of session state in my shared components query the query returns no rows even if I am not using the item in the query.
So if my query is "SELECT * FROM items" it will display nothing, the only way to get the report data back is to untick the inclusion of the session state and remove any reference to the item from my query, then I will get the report with all my data (which is NOT what I am trying to do).
Thanks alot
Khaled Jamoos

Column Links in Apex Reports

I am using version 4.0 of APEX. My question concerns linking to other APEX pages from a report. In APEX we link to another page, which may be a form or another report, by using a column in the report as a link column. Any column may be used to transfer values from any other column. This works fine, but the disadvantage is that whichever column is used as the link column has a heading which identifies the column's purpose but may not identify the purpose of the transition to another page. In Oracle Forms, we could use buttons as a column of the multi-row screen (i.e. same as APEX report), and the button's label identified the purpose for the transition.
Is there any way to create a column in an APEX report to serve the same purpose as the button in Oracle Forms?

Doug wrote:
I am using version 4.0 of APEX. My question concerns linking to other APEX pages from a report. In APEX we link to another page, which may be a form or another report, by using a column in the report as a link column. Any column may be used to transfer values from any other column. This works fine, but the disadvantage is that whichever column is used as the link column has a heading which identifies the column's purpose but may not identify the purpose of the transition to another page. In Oracle Forms, we could use buttons as a column of the multi-row screen (i.e. same as APEX report), and the button's label identified the purpose for the transition.
Is there any way to create a column in an APEX report to serve the same purpose as the button in Oracle Forms?
When discussing "reports" it is essential to indicate whether this means a standard report or an interactive report in order to receive an appropriate response.
It is possible to create a link column that is distinct from report data columns. In standard reports, this is done using the Add Column Link option from the Tasks menu in the right sidebar of the Report Attributes page. In interactive reports, define a Link Column on the Report Attributes page.
To provide further information about links to users in both cases, specify an HTML title attribute for the link in the Link Attributes property of the link definition. This will be rendered as a tooltip when the cursor hovers over the link in visual browsers, and as an audio cue on navigation to the link when using a screen reader.

Call Javascript function to pass a id from APEX report column link

Hi,
Can anyone help me, in a report column link i'm calling a function to pass an id and i want to onclick change a icon on that column based on the value on the column status of this table.
Is this possible?

Hi Ron,
I am doing exaclty what you have suggested me but no luck. I started changing the DEMO_CUSTOMERS application to my requirements.The report is working fine and on the report I have created a page attribute to the Hyper linked column and linked that to the page 2 and assign that attribute with #JOBNUM#.
I am able to pass that value on to form when I click on the JOBNUM. But the problem is I am not able to pass that value into the SQL query so that my query pulls 20+ columns on to the Form ( which is second page ).
Small clarification... On the form region it is said FORM NAME and type is HTML is that is the way the APEX was designed or does it need to say region type as FORM.
Thanks for your help in advance.
Cheers,
Krishna.

Columns missing in my generated INTRASTAT report...

Hi all,
can anyone tell me why my INTRASTAT report is missing the following columns:
Business Transaction Type (Export/Import), Destination Region (Import), Region of Origin (Export) and
ModeOfTrnsprt-Border (Export/Import). They are , along with the other columns that appears, all set in
"Foreign Trade: Declara. to Auth.: Check Incompleteness" (Txcode: VEB1)
The values for Business Transaction Type were maintained with TxCode:OVE5
The values for Region were maintained with TxCode: OVK2/VE70
The necessary customizing for the above were done in TxCodes: OVE5; OVK2/VE70
ModeOfTrnsprt-Border turned showed out in the Incompletion log of the INTRASTAT report because it showed that it hadn't been maintained in the vendor master data.
Once again, can anyone tell me why the above columns are missing in my INTRASTAT report?
Kind regards,
Joe

Hi Jürgen,
your last answer threw a lot of light on my problem, however, my problem still stands so I'm going to try to explain it a little better:
According to the INTRASTAT Declaration found in SAP,
http://help.sap.com/saphelp_40b/helpdata/en/2b/274520995111d1b4e30000e82d81b0/content.htm,
"Description of goods", field (6) is required for Germany and the execution of transaction OVE1 shows that there exists Commodity Code with Description for Germany but it isn't shown in the INTRASTAT report.
Furthermore, I checkedout the table VEIAV and found the column "Comm./imp. code no." but didn't find the column "Description...". The "Description of goods" exists both in the material master and the billing document, so how do I go about getting it into the INTRASTAT report?
Kind regards,
Joe

Report Painter - column missing

Hi Experts,
I am creating a new report using t-code: CXR4, I have created a form (a) for the two axis (matrix) with all my report format and I created also another form (b)which is just one axis with key figures.
After replacing the columns with form (b) in form (a), I noticed that there are 4 columns missing.
For example in form (b) I have 20 columns created but when replaced in form (a) columns it only displayed 16 column although I have displayed all hidden columns.
The missing 4 columns is the column in between 1 - 20 columns.
Is anyone has any idea why is this happened?
Many thanks in advance!
Point will be rewarded for those useful.
Cheers,
WL

Thanks Barry,
I have checked in the next sections/page right but the missing columns are in between the 20 columns...Eg. column no. 15 -18 is not shown in the page/form but rest are in the form. Appreciate your expert advise please.

APEX CSS - How do I get data in report columns to wrap?

I found information here http://www.orafaq.com/wiki/APEX_FAQ
About How do I get data in report columns to wrap?
This works and another way to do it is by adding the CSS directly into the
Home>Application Builder>Application 137>Page 1>Report Attributes>Column Attributes page
in the Column Formatting area. I added 'white-space:normal' and this works in FF but in
IE it has a different behavior.
In FireFox
testasdgadhad
gadfadgadgadg
adgafhsrgjsgnsfg
nsdfbadfafhafha
dfhadfh
In Internet Explorer
testasdgadhad gadfadgadgadg adgafhsrgjsgnsfg nsdfbadfafhafha dfhadfh
Is there a way to force it so it display in IE the same way that it displays in FF?
The correct display format is FF.
Thanks,
Nestor :)

I have try this because I found it during a search and it makes no difference in IE.
This is what I am using now 'display: block; width: 100px;max-width:100px;white-space:normal'
I also tried 'display:block; width:500px'
If I use the values 'normal' or 'pre' for white-space' it works in FireFox but not in IE, The display block
does not seem to make a difference. It seems that all I need is 'white-space:normal' but again
it does not works on IE.
Thanks,
Nestor :-)

How to display data in interactive report column without colons (:)

Dear Apex gurus,
I'm a newbie and have just created an Apex application from a spreadsheet. I've created a named list of values and used it in a checkbox against a field in the default page 3 Create form.
When I've selected multiple values in my check box in the form, the data in the interactive report appears as one line with colons separating the selected values like this: Dog:Cat:Bird
What I would like is to have the data appear in the interactive report column as a multi-line list like this:
Dog
Cat
Bird
I can work around this by modifying the SQL code in the Region Source of the Region Definition of the report (Default Page 1 interactive report) to replace the colons with <br>
SELECT replace("PETS_CHOSEN",':','<br>') "PETS_CHOSEN", FROM "MYAPP" Note: this doesn't format properly in the posting. I replace the colon with a html br
This works, but seems to be a hack to me. I am guessing that I've missed a simple option setting somewhere, but I can't find it.
The other problem with this solution is that when I export the report to Excel, what is exported is Dog<br>Cat<br>Bird, which is seems worse than colons.
Thanks,
- Morgan
Edited by: mnrussel on 16-Feb-2009 04:13

Hi Morgan,
I think you have at least two choices:
1 - Replace the colons with ', ' (comma and space) - sort of reasonable on screen and in an export
2 - Create a second page that has the same report but uses the "export: csv" template. Create a manual link to this page to replace the standard Export link. When such report pages are requested, they download immediately instead of displaying. You can, therefore, use commas in this one and <br> tags in the on-screen report version
Andy
ps - To display tags in a post, use &lt; for < and &gt; for >

Urgent - Report Column based on LOV - Value not found in LOV

Hi All,
Recently, we have upgraded to HTMLDB 2.0 from HTMLDB 1.5.
I have a SQL report. One of the columns is based upon LOV - Display as Text (Based on LOV, does not save state).
For the "Ids" of the report, it should display the corresponding "Names" from the LOV.
But, for the cases, where no record exist in LOV for some Id, then it is directly showing the Id instead of "-" (which i have specified in Display Null Text) in the report column attributes.
Before upgrade, it was working fine.
Any idea where is the issue.
Please help.
Thanks in advance,
Monika

Hi,
Can anybody help me in sorting out this issue please.
For your reference, i have made a test case on
http://apex.oracle.com/pls/otn/f?p=20451:4:3519837362944582:::::
Here, there are 2 tables
1. MY_EMP_COUNTRY(emoid, empname, cntry_id)
2. MY_COUNTRY_LOOKUP(id, name,active)
LOV is created on table 2
select name d, id r
from my_country_lookup
where active = 'Y'
And, on the page a SQL report is created
select empname, cntry_id
from my_emp_country
where, cntry_id is based upon the LOV.
Since, in lookup table, cntry_id = 4 is set inactive, it is not picked up by the LOV and hence on the report instead of showing the NULL text it is showing the cntry_id (4).
The attributes of report column cntry id -
Named LOV = CNTRY_LOV
Display Null = YES
NULL text = -
Display Extra Value = YES
Am I missing anything.
thanks,
Monika

Interactive report column filters to display differently than column values

Greetings...
We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the drop-down list that shows up displays the actual images, which is nice for the user to identify exactly which thing they want to filter on. The problem is when the user selects on of the options in the filtering drop-down, the resulting condition that is displayed under the interactive report search bar is the HTML code of the image. I'd like something else to display there because showing the user the HTML code is atrocious.
I didn't think what I want is possible, but then I came across the Page Locks page within ApEx (page 4000:291 in ApEx 4.0.1) which displays a list of all the pages of an application and whether they are locked or not. It also allows you to bulk lock or bulk unlock a bunch of pages. That page uses an interactive report with a column called "Status" which contains images that represent whether the page is locked or not. When you click the "Status" column heading to filter, instead of seeing the images of an open and closed lock, you see the words "Page Locked" and "Page Unlocked." And even better... when you select on of them, the condition that is displayed to the user is very user-friendly.
Can someone tell me how this is done so I can replicate it in my own apps?
Shane.

Why not create the IR using the text you require e.g. 'Lock', 'Unlock' and then use JQuery to replace the text in the report with the image you want. All the filters should then show the plain text and the report will display the image. e.g.
http://apex.oracle.com/pls/apex/f?p=46801:1
Here's what I did:
Firstly make sure the IR has a region template.
Then create a Dynamic Action with the following attributes:
1. Advanced
2. Event: After Refresh
3. Selection Type: Region
4. Region: [select the IR Region]
5. Action: Execute JS Code
6. Fire on page load: [checked]
7. Code:
$('td [headers="TEST"]').each(function(index) {
if ($(this).text() == 'Lock') {
$(this).empty().html('<img src="/i/htmldb/icons/locked_small.gif" alt="Lock" />');
else {
$(this).empty().html('<img src="/i/htmldb/icons/unlocked_small.gif" alt="Unlock" />');
});Where TEST is the column name.
That's it, this may also be of interest:
http://simonhunt.blogspot.com/2011/10/adjusting-interactive-report-column.html
I hope it helps
Shunt

Standar Report Column missing in Apex 5.0.

Similar Messages

Maybe you are looking for