Standard cost element reports are not available

Hi everyone,
I noticed that there are no standard cost element reports available in our SAP application. Is this because they are not imported or is this caused by another problem ?
Help would be greatly appreciated and points will be rewarded
Kind regards
Message was edited by:
        Björn Demol
Message was edited by:
        Björn Demol

can you tell me how did u resolve this issue
Regards
Bilal

Similar Messages

  • SAP Standard Transactions are not  Available

    Hi all,
    I have one issue that we want to start our project system but some SAP Standard Transactions are not available when i check that Transaction its showing "DOES NOT EXIST". I have then Checked Program name of that same SAP Transaction code in SE38.. But there also it gives "program does not exist" .
    Path is :SAP Menu ->Information Systems ->Project system ->Financials -> Costs ->Plan-based ->By Cost Element ->---Few Tcodes in this
    I want to find out all Inactive Reports in Project System from Project Information system and then i want to make usefull that reports for client.
    but i dont know the reason why this is not available..?and How can be made these all available.
    Thanks.

    analyse table t800
    A.

  • What features from previous versions are not available in Adobe Photoshop Elements 12?

    What features from previous versions are not available in Adobe Photoshop Elements 12?
    A handful of features from previous versions are not available in Photoshop Elements 12 due to new product support for 64-bit systems.
    Below, we list the features and the easy alternatives available to you in version 12:
    The Magic Extractor ToolAlternative: Use the Quick select tool together with the Refine Edge tool to quickly select and extract anything from your photos.
    Texture Fill
    Alternative: Use the Edit > Fill Layer option and select the "Pattern" option for Contents. You would have to pre load the pattern file with the texture you want.
    Here is a tutorial on how to create a pattern file: http://www.hongkiat.com/blog/creating-custom-pattern-in-photoshop/
    Frame from video (imports a frame from video in PremiereElements)Alternative: Use the freeze-frame feature in Premiere Elements to capture a frame in video and save it as a photo
    Interactive layout mode in Photomerge PanoramaAlternative: None
    Photoshop ShowcaseAlternative: Try Adobe Revel. Elements 12 will let you view and share your Elements photos and videos across smartphones, tablets, and the web, via Adobe Revel.
    Enhance>Adjust Color>Color VariationsAlternative: None specifically, but you can use Auto Smart Tone
    Filter>Render>Lighting EffectsAlternative: None

    I thought Adobe staff only came here in their "spare time"?

  • Some performance counter objects are not available for a 32-bit process on 64-bit versions of Windows Server 2012 standard

    When we try to gather performance counter information for a 32-bit process on a 64-bit computer that is running Microsoft Windows Server 2012, all our performance counter objects are not available with 32 bit perfmon application (C:\Windows\SysWOW64\perfmon.exe)
    I didn't notified any errors while registering our counter objects or while running Perfmon.exe
    Note: Same counter objects are available and working fine with Windows Server 2008 R2.
    for diagnostic our counters on WIN2012, ran command as follows:
     cd c:\windows\sysWOW64
     lodctr /Q
    I am able to see all our counter objects on response and infact all were shown as enabled, as shown below
    Appreciate quiclk response with solution or clues to diagnose it more details.
    Thanks & Regards,
    Sudhakar Rudra

    Hi,
    Thanks for your reply.
    I hope you understood our problem.
    same our system counter objects (ver x), we able to browse from Perfmon 32 bit app on Windows 7, Windows 2008 R2 (64bit) OS but not on Windows 2012.
    I am able to see all counter objects registered as follows (same at HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\HMI Alarm Class\Performance,
    HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\HMI Alarm Class\Performance
    and
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HMI Alarm Class\Performance)
    Only difference I observed that "Disable Performance Counters" were set to 4 in Windows 2012 OS unlike other windows 7 64bit OS and there is no differnece for remaining all entires.
    I tried setting that "Disable Performance Counters" value to "0", but some how they get reset to "4", no luck..
    I think "Disable Performance Counters" value either "0", or "4", should not matter for browsing our counters with 32bit bit perfmon applicaiton.
    Do you see any issues of registry entries. ?
    On what basis perfomance monitor list few enabled counters?
    How can we add our counters manually to perfomance monitor?

  • Cost element 7000218 is not assigned to a cost component in CostCompStruct

    Dear All,
    How to change the standard price in MR21 for materials with Price Determination Control 3 ( header level V & 3) (Split level S & 3)
    In MR21, when I am updating the price for initial stock uploading.
    It throws me a error Cost element 7000218 is not assigned to a cost component in CostComp Struct 01
    Actually the cost component structure 01 is not active. we are using OP cost component structure & it is active , further the  assigned to  the company code level.
    Cost element 7000218 is assigned to the cost component structure OP.
    please suggest why it result in above error, even though we are not using cost component structure 01.
    Regards
    Subbu.

    Hi,
    Did you change the cost component structure assignment for the plant ?
    This error could be produced due to the fact that for this plant the cost component struture was changed from 01
    But ML tables makes reference to the old cost component structure.
    You can check table CKMLKEV.
    During the creation of the material the system creates data for the current, previous and last period of the last year (12 2010).
    Therefore the system tries/ needs to create also a cost componet split for the period 12 2010. For this it must used the cost component structure for this period 12 2010 (maybe 01).
    In such a case you have to define the cost element in '01' as well.
    Please do read note 434873 carefully for the side effect and correct procedure to change cost component structure.
    regards
    Waman

  • Settled costs don't display in hierachy and by cost element report!

    Hi Experts,
    After doing project settlement, I check in hierarchy cost report (S_ALR_87013533) and by cost element report (S_ALR_87013543) and found that: Costs which had been settled did not display anymore!!
    It's not my expectation because I want to see the total actual cost of project.
    Please help to advise.
    Thanks and best regards,
    Khoa Huynh

    Hi Sreenivas Kadiam,
    So you mean that only when we settle project cost to CO production order, in Project cost report, balance will be zero is the standard behavior, am I right?
    Because when I settled the project cost to AUC, the total actual cost of project still display in Project cost report.
    Thanks and best regards,
    Khoa Huynh

  • Cost element report prob. with auxiliary account assignment

    Hi,
    WBS is statistical.
    Orders are auxiliary account assigned to WBS.
    When running cost element reports, cji3 ; settlement cost elements are not showing there for the order.
    Kindly suggest.
    Thanks,
    Harsh.
    Edited by: Harsh Saxena on Dec 8, 2010 2:12 PM

    NOT RESOLVED

  • Reports are not opening after SCCM 2012 R2 Upgrade

    Hi,
    I have upgraded my SCCM 2012 SP1 to R2, After that I am unable to run a report and getting below error
    System.Web.Services.Protocols.SoapException: The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: Logon failure: unknown user name or bad password.
    Seems it is a known issue after R2 upgrade,To resolve this issue we need to change the registry value for "EnableRbacReporting" to "0" under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP.
    It was fine for some time,Later its value reverted back to "1" on its own and again reports stopped working.
    Is there any other way to resolve this issue in order to make sure my reports are always available
    Please help me.Thanks
    srkr

    Hi Paul,
    We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
    Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
    The command for SQL Server 2012 is:
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
    I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
    folders>
    DTS
    SDK
    Tools
    srkr

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • Standard Cost Analysis Report  (MCI3)

    Hi,
    On SAP standard Cost Analsys report, i have been unable to dig out the reason of not populating values in following few columns.
    - Int. wage costs
    - Int. Mat. Costs
    - Ext. Wage Costs
    - Extenal Mat Costs
    - Services Costs
    Can anybody guide me in populating these values.
    Regards
    Shah

    hi
    if you have posted any material against the order ,then the cost will be reflected in int.material cost ,which is also same for other parameters
    also check whether you info structure is switched on OMOS
    regards
    thyagarajan

  • Element GRP is not available in the container

    Hi All,
    I am getting a error ''Element GRP is not available in the container'' whenever I try to create a PR and the workflow is triggered. I am using a custom rule to determine the approver. The workflow is not able to determine the agent and returns with the error message Element GRP is not available in the container whenever it is triggered automatically.
    But when i manually test the workflow manually it is working fine.
    Can someone tell me why it is happening and what could be done to overcome this error?
    Thanks and regards,
    Raj

    As you said
    "But when i manually test the workflow manually it is working fine."
    I think the problem is not with your rule ....
    you haven't specified when the error is occurring ...
    if its occurring in starting ..please check if your initial binding  ( For workflow triggering in header ) are right .
    please tell us where and when the error is occurring ...
    thanks,
    Naval bhatt

  • Ibooks top sellers & other books are not available for us to purchase in India.

    Top seeling ibooks & other books within the ibooks store are not available for purchase in India except for some free classics.
    When will the topselleing books within ibooks store be available for us to purchase?

    No-one knows. It depends on when Apple decide to open an iBookstore for India.
    In the mean time, you could create an Apple ID in the US store without a credit card and use iTunes gift cards to buy things. Gift cards are available on eBay. (I have never done this, but heard a number of reports from people who have and were happy with this approach.)
    Michi.

  • Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

    We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
    Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
    But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
    Edited by: Chaitu on Mar 17, 2013 8:57 AM

    Chaitu wrote:
    If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
    Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
    Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
    I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
    For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
    Hi Chaitu,
    patchset(10.1.2.3) is applicable for the following releases only:
    Oracle Application Server 10g Release 2 (10.1.2.0.0)
    Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    Oracle Application Server Forms and Reports Services (10.1.2.0.2)
    Oracle Application Server Portal 10g Release 2 (10.1.4)
    Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
    Oracle Developer Suite 10g (10.1.2.0.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
    OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
    OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
    Hope this helps
    Hamid
    * batter discuss at {forum:id=82} forum.

  • Error - Some objects are not available to your user profile...

    Hello,
    It is for BI 4.1 on Windows. We have a connection called CON1 pointing to DB1. It uses UNIV1 All reports were working fine and we were able to refresh it as well.
    Now the CON1 is changed to point to DB2 and we are now getting following error - "Some objects are not available to your user profile. You cannot refresh this Query. See your Business Objects administrator to request rights".
    If I create a new report using CON1 and the it works fine. Only the old reports are still causing issue on refresh. I tried with Admin account as well and same issue.
    The CON1 is still CON1 and universe UNIV1 is still using CON1. Just the content was edited from DB1 to DB2 in CON1. If we create a new report then no issue.
    Can anybody advice if something needs to compiled. Your help will be greatly appreciated.
    Regards,
    SS

    Your old reports are still pointing to same connection. Remember the DSN has been pointed to use another Database. The records and entries will be different. In addition as the records or object mapping have changed for these reports. Hence this would be a very normal behaviour.
    Create a new connection named CON2 or something like that to point DB1 as per your requirement. This way your original reports would work.

  • Some DCs are not available locally - NWDS error while importing Track confg

    Hi,
    We have configured NWDI in our landscape.
    As per the requirement of the developers, we have created a new product and software component (SC) in SLD, as they don't want to use any standard components.
    The same has been synced with CMS using update CMS.
    Now a new track is created (in landscape configurator) and the new SC has been added to the track. Track creation was successfull....given the sdm passwords for all 3 systems.
    While saving a pop-up came saying that as the SC is New (i did not select the developed option), I need to Check-in and Import into DEV manually.....I GOT STUCK HERE.
    What files needs to be checked-in in Transport studio?
    Also when developers are trying to import the configuration in their respoective NWDS...they are getting "Some DCs are not available locally" error.
    Also updated the patch of their NWDS but still no use.
    Could any one help me out.
    Regards,
    Siv

    Dear Satya,
    As per your advise. I have maintianed the 3 dependencies for the SC.
    However, the error "Some DCs are not available locally" is still recurring in NWDS.
    Below is few line from log,
    Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Used component not found: sap.com/tc/bi/bp/webDynpro
    Jul 14, 2009 6:49:13 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: RIB_SAPPS: Build failed for sap.com/RIB_SAPPS(arg_PRIMAVERACUSTOMIZATION_1) in variant "default": Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
    Build log -
    Development Component Build (2009-07-14 18:49:13)
      Component name: RIB_SAPPS
      Component vendor: sap.com
      SC compartment: arg_PRIMAVERACUSTOMIZATION_1
      Configuration: EPD_ARG_D
      Location: EPD_ARG_D
      Source code location: http://den2:50100/dtr/ws/ARG/arg_PRIMAVERACUSTOMIZATION/dev/inactive/DCs/sap.com/RIB_SAPPS/_comp/
      DC root folder: C:\Documents and Settings\sa45572\.dtc\1\DCs\sap.com\RIB_SAPPS\_comp\
      DC type: Web Dynpro
      Host: CMR-2FL0565
    DC Model check:
       All used DCs are available locally
       ERROR: Check for used DCs failed: Used component not found: sap.com/tc/bi/bp/webDynpro. DC not found in DC syncdb.
       Build failed with errors.
    Jul 14, 2009 6:48:50 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/tc/wdp/metamodel/content" for DC "arg_PRIMAVERACUSTOMIZATION_1:sap.com/RIB_SAPPS":Cannot find compartment of used component: sap.com:tc/wdp/metamodel/content
    Regards,
    Siv

Maybe you are looking for