Standard job, sap_ccms_moni_batch_dp, creates remote gateway

I noticed that standard job, sap_ccms_moni_batch_dp, in our sandbox environment creates a remote gateway to our Production environment. I'm thinking this is not a good thing. I deleted all the standard SAP jobs and used the function in tcode SM36 to reschedule them. They still create a remote gateway that seems to point at Production. Is this an artifact of our recent system copy procedure to create our Sandbox? How can I correct it?

James,
Did you run BDLS (Logical Name Conversion) after System Copy?
Secondly you need to know if you need this job in your system.
Please check the below link for more details. Please let us know if you still have some doubt.
http://help.sap.com/saphelp_nw04/helpdata/en/be/44443c4a08ba26e10000000a114084/content.htm
Regards,
Sujit.

Similar Messages

Standard Job SAP_CCMS_MONI_BATCH_DP is cancelling

Hello All
I am facing problem with standard job SAP_CCMS_MONI_BATCH_DP...It is scheduled on hourly basis.
But on some days at some time it is failing with only one error message as
08/04/2011 17:52:26 Job started
08/04/2011 17:52:26 Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID
08/04/2011 17:52:29 You can only work in client 320
08/04/2011 17:52:29 Job cancelled
There is no specific time that it is failing.Please suggest me how can i resolve this?
Manmohan Soni

Hi,
Looks like the client in which job is to run, is different from which client the job is called from.
Check thread: Sm37 job problem
Also check sm21 log to get more details.
Regards,
Srikishan

Standard job failing -- SAP_CCMS_MONI_BATCH_DP

Hi All,
I am running the standard job SAP_CCMS_MONI_BATCH_DP from last couple of years on my production system. I monitored from last 4 - 5 days the job is getting cancelled and providing a dump like ABAP/4 processor: CONVT_NO_NUMBER.
Sometime the job log says :
1. Logical system MSG_SSS is not configured in table /ISDFPS/ALE_SYS
    Job cancelled after system exception ERROR_MESSAGE
2. Logical system Startuptoo is not configured in table /ISDFPS/ALE_SYS
     Job cancelled after system exception ERROR_MESSAGE
Dump says :--
Runtime Errors         CONVT_NO_NUMBER
Exception              CX_SY_CONVERSION_NO_NUMBER
Date and Time          17.02.2009 13:16:59
Short text
     Unable to interpret "More than 100 " as a number.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was n
      caught in
     procedure "RETRY_MECHANISM_SETUP" "(FORM)", nor was it propagated by a RAISIN
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program attempted to interpret the value "More than 100 " as a number, bu
     since the value contravenes the rules for correct number formats,
     this was not possible.
     There is probably an error in the program
     "SAPLSALSLD_MODEL".
Please advice ..

Hi Shashi
Yes!!!!!! definitely an ABAP Program error..
The source code may have been modified and has something as "more than 100" wrongly written in it. This could also be a case of variable settings as text is input in place of numbers or something like this.
An ABAPer could help you better in this one or the best possible solution definitely would be an OSS message to SAP.
Regards
Chen

Error in program RSAL_BATCH_TOOL_DISPATCHING (job SAP_CCMS_MONI_BATCH_DP)

Hi All,
After successfull upgrade in Support pack level 17, I am getting an error message in with a standard job SAP_CCMS_MONI_BATCH_DP. I am getting the following error messages in SM21.
Database error -440 at OPC
> SQL0440N No authorized routine named "DB6PMCF" of type
> "FUNCTION" having compatible arguments was found.
> SQLSTATE=42884
Database error -440
Database error -440 at OPC
> SQL0440N No authorized routine named "DB6PMCF" of type
> "FUNCTION" having compatible arguments was found.
> SQLSTATE=42884
Database error -440
Database error -440 at OPC
> SQL0440N No authorized routine named "DB6PMCF" of type
> "FUNCTION" having compatible arguments was found.
> SQLSTATE=42884
Database error -440
Database error -440 at OPC
> SQL0440N No authorized routine named "DB6PMCF" of type
> "FUNCTION" having compatible arguments was found.
> SQLSTATE=42884
Even after checking the error in details I found the program "RSAL_BATCH_TOOL_DISPATCHING" causing the error message. In details the error message says :
Job started
Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: <SID>
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20091109062730',0 as DB6PMCF_PARTITION,' ','T
: ','20091106055752','700',0.0,0.0,0.0,0.0,0 FROMSYSIBM.SYSDUMMY1, TABL
: E(SAPTOOLS.DB6PMCF('/db2/SID/log_dir/') ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_STATEMENT
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 440-
: SQL Message: SQL0440N No authorized routine named "DB6PMCF" of typ
: e "FUNCTION" having compatible arguments was found. SQLSTATE=42884
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Did anybody encountered with any situstion like this...Would appreciate any early response.
DID CHECK WITH KERNEL FILES, LOOKS GOOD FOR ME. ALSO CHECKED WITH note 978319 ..
Thanks in Advance

I have not yet tried to apply the note 978319.
Current DB LEVEL is as follows..
DB client lib.     DB6_81
DB releases        DB6 08.02.*, DB6 0
DBSL version       700.08
DBSL Patch Level   171

SAP Standard Jobs are getting canceled

Hi Basis Gurus,
In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
The jobs are as follows
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_CPH_HRCOLL
SAP_CCMS_MONI_BATCH_DP
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_NONE_R3_STAT
SAP_COLLECTOR_FOR_PERFMONITOR
SAPCONNECT ALL SEND
SAP_REORG_ABAPDUMPS
SAP_REORG_SPOOL
SAP_RSICFDLT
In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
Please let me know how can troubleshoot it and resolve this issue.
Our is qulaity BW 3.5 system
Solaris OS
Oracle Database
Please help me.
Regards,
Anil.

Hi ,
For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
Ankit

Standard Job Search Is not working in Erecruitement

Hi
In Erec we have a Standard Job search Webdynpro Component HRRCF_C_SEARCH_UI Where we can search for the Jobposting based on Parameters like Functional Area, Corporate Title, Country, Location and Contract type,
When we search based on Country and Location only for few postings it will be unsuccessfull but without giving any search criteria we are able to get all the postings. This is happening only for few Posting remaining can be search on all the parameters,
We are searching for the Postings which are created earlier and the Background Job which runs the program RCF_PERIODICAL_SERVICES has been completed to in frequency of 30 minutes.
When i debug the code i see it searches in the Function Module HRRCF_MDL_SRCH_SEARCH and in that some SKWF_INDEX_COMBINED_SEARCH_XML with some query table ..
Is this some kind of TREX? I have no idea about this.
Please Help me out.
Thanks
Dipu

Your posting doesn't seem to be related to how to do something in Web Dynpro. This formum isn't intended for all questions about any application that might happen to be implemented in WDA. If your question is more about how the inner functionality of a business transaction works, there are other forums where you would have a higher chance of receiving a better response.

Standard process for creating Services and accessing Services on EBS 11i

All,
Do you have any kind of documentation that explains how we should handle Services in the EBS 11i?
We have two types of interfaces currently and no one of them uses Services:
1. We create files in some kind of gateway
2. We get files generated in a gateway or when it's the case we access different databases via database link.
I really appreciate your help.
Thanks,
Fernando

Right, but what would be all the standard process for creating a webservice?
Is there any kind of document that shows in detail how to do that? and also, how we should access webservices from other systems?
Thanks for your help.
Fernando

QuickVPN RV180W - Remote gateway wasn't reached

I am trying to setup QuickVPN on my RV180W and having no luck. My client log shows "Remote gateway wasn't reached" "Failed to connect". The client is Win7 64-bit. I have created the firewall rule for icmpv4 on my windows 7 client but still no luck. I checked with my ISP and they say all ports are open. I have created the VPN user.

this is just silly!
ive been reading posts from 2009 we are now in 2013 and this problem still excists. i buy a router with quickVPN, cannot get it to connect due to the ping on windows 7 x64\x86 and i have also tried windows XP.
nutting.
i have tried everything i have read over the last week and still i cannot get a quickvpn connection running. Cisco support confirmed my router config is ok as they had a quickvpn connection from their lab XP machine running for a few minutes.
2013/12/16 15:13:40 [STATUS]OS Version: Windows 7
2013/12/16 15:13:40 [STATUS]Windows Firewall Domain Profile Settings: ON
2013/12/16 15:13:40 [STATUS]Windows Firewall Private Profile Settings: ON
2013/12/16 15:13:40 [STATUS]Windows Firewall Private Profile Settings: ON
2013/12/16 15:13:41 [STATUS]One network interface detected with IP address 192.168.30.237
2013/12/16 15:13:41 [STATUS]Connecting...
2013/12/16 15:13:41 [DEBUG]Input VPN Server Address = DNSNAMER
2013/12/16 15:13:41 [STATUS]Connecting to remote gateway with IP address: REMOTEIP
2013/12/16 15:13:42 [WARNING]Server's certificate doesn't exist on your local computer.
2013/12/16 15:13:46 [STATUS]Remote gateway was reached by https ...
2013/12/16 15:13:46 [STATUS]Provisioning...
2013/12/16 15:13:55 [STATUS]Success to connect.
2013/12/16 15:13:55 [STATUS]Tunnel is configured. Ping test is about to start.
2013/12/16 15:13:55 [STATUS]Verifying Network...
2013/12/16 15:14:01 [WARNING]Failed to ping remote VPN Router!
2013/12/16 15:14:04 [WARNING]Failed to ping remote VPN Router!
2013/12/16 15:14:07 [WARNING]Failed to ping remote VPN Router!
2013/12/16 15:14:10 [WARNING]Failed to ping remote VPN Router!
2013/12/16 15:14:13 [WARNING]Failed to ping remote VPN Router!
2013/12/16 15:14:16 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
2013/12/16 15:14:46 [STATUS]Disconnecting...
checked ipsec services.
disabled and enable firewall
checked for single network card (i mean common, how many portable devices only have 1 nic?)
opened icmp on firewall
enabled icmp respond on WAN.
added quickvpn to firewall
enable remote managment (was already enabled and has to be for qvpn to work)
used IP instead of dns
running in compatabuilty mode for vista and xp
cant remember all the things ive checked and changed over the last week.
there is so many different apparent fix's and no concreate info from Cisco.
advertise it as a VPN router but infact only thing that works is pptp (shake my fist at you Cisco)
any help would be greatly appreciated as im close to returning this as not fit for purpose.
thanks in advance.

Ssl to remote gateway

Is it possible to apply ssl to remote gateway port adapter?
we have setup remote gateway and IIS on one machine.
and IDM and App Server on another.
configured the IIS SSL with Websphere to call IDM page.
while IDM is interacting with Remote Gateway adapter, can we apply SSL to that port address(i think it is 9278)?

Hi,
For Event ID 102, please refer to following article and check if can help you.
Event ID 102 — RD Gateway Server
Configuration
à
What is confusing about this is that Remote Desktop Services role is not installed on this server
Did you enable RWA on the SBS 2011?
Small Business Server 2011 Standard installs and configures the Remote Desktop Gateway role for use with the Remote Web Access website. The setup process does not install the Remote Desktop Gateway Manager management console. As a result, the Remote Desktop
Gateway Manager mmc will not be listed under the Administrative Tools and in Server Manager, the Remote Desktop Gateway role will appear to not be installed. The service is however installed and is properly configured for use with the Remote Web Access website
by SBS Setup and the Internet Address Management wizard.
Please type
services.msc in RUN to open Services panel, navigate to Remote Desktop Gateway service and open its Properties. Would you please let me know the Startup type of this service that had been set? Meanwhile, please refer to following KB and check
if help you to manage the Remote Desktop Gateway Service in SBS 2011 Standard.
How to Manage the Remote Desktop Gateway Service in SBS 2011
Standard , SBS 2011 Essentials, Windows Server 2012 Essentials and Windows Server 2012 R2 Essentials.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

Error saving job to database for standard jobs scheduling

Hi,
In IDES server when iam goto Tr.code -- SM36 -- Standard Jobs -- Default Scheduling iam getting below error.
Error saving job to database
Message no. BT117
Diagnosis
The SAP system was unable to save the current job in the database. This failure suggests that there is a problem with the database system or with the network connections between the SAP application servers and the database system.
System Response
Job not saved and not scheduled.
Procedure
To analyze this problem, start by checking the system log for messages about network or database problems. You can also use the computing center management system to check your system for problems.
Guide me for the same.
Thanku

HI,
Sometimes this error will come.
Try to schedule jobs manually using SM36 instead of using standard job button.
Also you can check this thread
Re: Error saving job SAP_REORG_JOBS to database
Which seems to report same problem.
Its nothing to take with database conenctivity as SAP is up and running .
Try this and revert.
Regards,

Creating remote objects and passing the retrieved data to modules

I found at this Adobe tutorial a nice "RemoteService" class that creates a RemoteObject and contains the functions for handling the result and fault events. If I wanted to use this approach, how could I pass the data from the result handler to interfaces that modules from the main application could use?
I could put the RemoteService/RemoteObject in the modules, but (in my opinion- and I could be wrong) the best design seems to be using the remote calls in the main app and passing the data along to the modules.
Ultimately, I would like to know what the "best practices" are for creating remote objects and passing the retrieved data to modules
Thanks!

public void mouseClicked(MouseEvent e) {
X x = new X(e.getX(), e.getY());
}I don't see the difficulty.

Standard-Entreprise Propagation error remote DB

Hello,
I use a Oracle9i Release 9.2.0.1.0 - Production
I create remotely queue tables and queues, propagation via DBLink. That's ok
But the propagation fails with this error :
ORA-02068: following severe error from REMTE
ORA-00600: internal error code, arguments: [kolaHashFind:hash table], [], [], [], [], [], [], []
Have any idear ?
Thanks for info
Regards
Rafael Rimbert.

we have found it.
We transfert message wich payload is type sys.xmltype
The problem was : one instance was with character set we8iso... and the other ms1252.

Exception while creating remote source in SDA

Hi
I am trying to create a remote data source in hana studio using following script
CREATE REMOTE SOURCE hivedb
ADAPTER "odbc"
CONFIGURATION 'DSN=REMOTEHDB'
WITH CREDENTIAL TYPE 'PASSWORD'
USING 'user=SYSTEM;password=Cloud123'
and following exception is occurring
Could not execute 'CREATE REMOTE SOURCE hivedb ADAPTER "odbc" CONFIGURATION 'DSN=REMOTEHDB' WITH CREDENTIAL TYPE ...' in 589 ms 383 µs .
[129]: transaction rolled back by an internal error: exception 301109: Storing credential to the persistency failed - encryption failure: decryptFinal: wrong or inconsistent padding decrypted!
exception 1000013: decryptFinal: wrong or inconsistent padding decrypted!
Any suggestion?
Thanks

Hi Khalid,
I don't have experience in connecting the Hadoop with HANA using SDA, however I can refer you some of the SCN documentation to make sure you followed all the steps.
Please have a look at the following content.
http://scn.sap.com/community/developer-center/hana/blog/2013/08/22/smart-data-access-and-hadoop
SAP HANA Smart Data Access - YouTube
Regards,
Venkat N.

How to use standard classes to create custom modulepool program like ME21N

I am at the Starting Point of doing a classical dynpro program via Abap Objects which address all controls with MVC Architecture .So i debugged the standard ME21n transaction to find out how i can start with. I came across this interface which has no Attributes and Methods.I wondered y .Thats y i posted a Question .I also seen a lot of Standard classes
CL_TABLE_VIEW_MM
CL_BASIC_MODEL_VIEW_MM
CL_COMPOSITE_SCREEN_VIEW_MM
CL_SCREEN_VIEW_MM
CL_TABLE_VIEW_MM
CL_TABSTRIP_VIEW_MM
CL_TC_BUTTON_VIEW_MM
CL_TC_ITEM_VIEW_MM
CL_TOGGLE_VIEW_MM
CL_VALUE_MODEL_VIEW_MM
and much more for Model and Controllers ..Can u plz guide me how i can make use of this classes effictively in my custom module pool programming

I think all these classes serve the purpose of embracing the basic ones and are used specificalty in MM module.
If you want to create similar module pool program with nice expand/collapse buttons in relation to subscreens please refer the some tips [here|expand/collapse button functionality on module pool screen;
Also there are transactions like BIBS, DWDM which you can follow the examples from. I think SAP has covered all GUI controlls there so you can create really complex programs with various GUI controlls independently of module used for.
Of course you can still stick to classes you mentioned but I think the better is to learn some standard approach of creating such screens, then if you feel more advanced go for using module specific ones if you really need that.
Regards
Marcin

Standard job, sap_ccms_moni_batch_dp, creates remote gateway

Similar Messages

Maybe you are looking for