Standard Layout problem

Dear Friends,
I am using standard program FBL1N. After executing I created varient.
My problem is in Input Screen Layout option is there,
but it is not showing me any layout which i created.
Regards

Just a wild guess. In your system, check the MS excel security settings. Excel->File->options->Trust center settings. We had some similar issues with excel columns visibility when you click on the ALV spreadsheet button or download which was corrected by changing the trust center settings. I don't exctly remember which settings affect this. You may have to compare the settings with another system (If it works fine in some other system which was the case in our issue). Pls ignore if not relevant.
Regards,
Gokul

Similar Messages

ALV Standard Layout with problem for excel download

Hi, i have a alv grid report with this problem:
I execute the report and see all data ok.
chose the download option to spreadsheet.
*When open the spreadshet only see headers and no data.
The report have a standard Layout with 4 of 12 column selected, if i execute this report and add a new column for the pool the download works fine, if i save this new layout as default and execute the report again the download don't work fine.
¿Some idea? Thxs

Just a wild guess. In your system, check the MS excel security settings. Excel->File->options->Trust center settings. We had some similar issues with excel columns visibility when you click on the ALV spreadsheet button or download which was corrected by changing the trust center settings. I don't exctly remember which settings affect this. You may have to compare the settings with another system (If it works fine in some other system which was the case in our issue). Pls ignore if not relevant.
Regards,
Gokul

Help needed with a layout problem

I'm trying to build a JTabbedPane where each tab has a grid of buttons. The number of buttons is variable, and I'd like the buttons to flow sort of like with FlowLayout, with four columns. I need all the buttons to be the same size, even across tabs. I tried GridLayout, which doesn't work when I have too few buttons to fill a row. It fails in different ways, depending on how I set things up. If I try to set the layout to GridLayout(0, 4) (four columns), then if one tab has one row and another has two, the buttons on the one-row tab expand vertically to the height of the two-row tab. If I try GridLayout(2,4), then if a tab has only one button, it expands horizontally to the maximum width of any of the tabs. (It also has the further problem that if the maximum number of buttons on any tab is 6, they are placed in a 2x3 array; I'm trying to get them to be 4 buttons on the first row and 2 on the second.)
I'm hoping there's a standard layout manager that can do the job, but I'm not too familiar with the Swing manager classes. Can I get what I want without writing my own layout manager?
Thanks,
Ted Hopp
[email protected]

I didn't think it was specifically a Swing question.Well, its either Swing or AWT, people who develop GUIs are the ones who are going to have experience using layout managers.
but if someone can point the way to how to do this with GridBagLayout, nested containersSince you finished reading the tutorial, what have you tried? You've explained your problems using a single layout manager, so what problems are you having using nested layout managers?
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

Standard layout for AP cheque payment

Hello All,
Can you please provide me the standard layout for the AP cheque payment for the tcode F110.
Its urgent.I will reward you with points.
Thanks,
Karan

Hi,
Simple procedure in developing a check printing using SAP Script is:
Copy the SAP delivered layout set F110_PRENUM_CHK using TCode SE71
Change the copied layout to meet the custom requirements. This is to avoid developing the application from the scratch.
Goto-> FBZP transaction and in the payment methods for company code, find the company code, click on "Paylink Cheques" and assign the custom form name here.
Regards,
Shiva kumar

Standard layout for AP cheque payment for F110 tcode in smartform

Hello All,
Can you please provide me the standard layout in smartform for the AP cheque payment of the tcode F110 .
Its urgent.I will reward you with points.
Thanks

Hi All,
I have got the satndard layout FI_CA_DME_CHECK_SAMPLE_SF. Can anybody tell me the driver program for this layout.
Its urgent. I will reward you with points.
Thanks

CSS Layout Problem?

Can someone please help me with a layout problem.
As far as I can tell the page looks as it should in Netscape,
Firefox, etc., but IE6 and 7 refuse to work correctly.
The page I am working on is:
http://www.vmtampademo.com/localangler/testpage.html
Most of the picture caption and headline of the middle column
is behind the picture. I attempted to force the info with a
seperating div which seems to work sometimes. I doubt that this is
the correct solution. What am I doing wrong?
Thank you for the help!

It looks fine in Firefox 2.0.0.1, Opera 9.10, and IE 7.

Layout problem in PDF conversion

Hi all,
i am downloading spool data using the function module CONVERT_ABAPSPOOLJOB_2_PDF. But i am facing layout problem. e.g. RFBILA00(financial statement generation program) has written balancesheet data to the spool. This spool data has some 6 columns. but CONVERT_ABAPSPOOLJOB_2_PDF is writing only first 3 columns to the generated PDF file. i used 'GET_PRINT_PARAMETERS' function module also with values like layout as 'X_65_132' and 'X_90_120'. but no success. if anybody knows the answer, please let me know.
Thanks in advance,
Naveen

Hi All,
i am following the below approach to download the information from spool.
program/spool output is an ALV List output data having 8 columns. but below approach is converting only first 5 columns in to PDF format. other 3 columns are getting truncated.
FUNCTION /ngl/download_spoolinfo_as_pdf.
""Local Interface:
*" IMPORTING
*"     REFERENCE(I_SPOOL_REQUEST) LIKE TSP01-RQIDENT
*"     REFERENCE(I_FILENAME) LIKE RLGRAP-FILENAME
*" EXCEPTIONS
*"      DOWNLOAD_ERROR
TABLES tsp01.
DATA: mtab_pdf LIKE tline OCCURS 0 WITH HEADER LINE,
        mc_filename LIKE rlgrap-filename.
DATA: mstr_print_parms LIKE pri_params,
        mc_valid(1) TYPE c,
        mi_bytecount TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      copies                 = '1'
      cover_page             = space
      destination            = 'locl'
      expiration             = '1'
      immediately            = space
      mode                   = space
      new_list_id            = 'X'
      no_dialog              = 'X'
      user                   = sy-uname
      line_size              = 200
      line_count             = 65
     layout                 = 'X_65_200'
      layout                 = 'X_90_120'
      sap_cover_page         = 'X'
    IMPORTING
      out_parameters         = mstr_print_parms
      valid                  = mc_valid
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
IF sy-subrc EQ 0.
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid              = i_spool_request
        no_dialog                = 'X'
        dst_device               = mstr_print_parms-pdest
      IMPORTING
        pdf_bytecount            = mi_bytecount
      TABLES
        pdf                      = mtab_pdf
      EXCEPTIONS
        err_no_abap_spooljob     = 1
        err_no_spooljob          = 2
        err_no_permission        = 3
        err_conv_not_possible    = 4
        err_bad_destdevice       = 5
        user_cancelled           = 6
        err_spoolerror           = 7
        err_temseerror           = 8
        err_btcjob_open_failed   = 9
        err_btcjob_submit_failed = 10
        err_btcjob_close_failed = 11
        OTHERS                   = 12.
    IF sy-subrc EQ 0.
      mc_filename = i_filename.
      DATA: lv_filename TYPE string.
      lv_filename = i_filename.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize = mi_bytecount
          filename     = lv_filename
          filetype     = 'BIN'
        TABLES
          data_tab     = mtab_pdf
        EXCEPTIONS
          OTHERS       = 22.
      IF sy-subrc EQ 0.
        WRITE:/ mc_filename, 'CONVERTED TO PDF AND DOWNLOADED'.
      ELSE.
        WRITE:/ 'PROBLEM WITH DOWNLOAD'.
        RAISE download_error.
      ENDIF.
    ELSE.
      WRITE:/ 'PROBLEM WITH PDF CONVERSION'.
      RAISE download_error.
    ENDIF.
ELSE.
    WRITE:/ 'PROBLEM GETTING PRINT PARAMETERS'.
    RAISE download_error.
ENDIF.
ENDFUNCTION.

Layout problem - multiple repeating frames

Hi, I have a layout problem, pls help!
Short report description:
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
- - - - .. other repeating frames ..
When reaching the bottom of a page, and there is not enough room to print a record for Repeating frame 2, a record from Repeating frame 3 is printed in the bottom.
Next page starts with the remaining records from Repeating frame 2.. and then the remaining records from Repeating frame 3.
For example:
Page 1:
Rep frame 2 - Record 1
Rep frame 2 - Record 2
Rep frame 2 - Record 3
Rep frame 3 - Record 1 -- not enough space to print Record 4, so this record is printed
Page 2:
Rep frame 2 - Record 4
Rep frame 2 - Record 5
Rep frame 3 - Record 2
How can i ensure that all records from Rep frame 2 is printed before records from Rep frame 3?

Hi, thanks for helping me out!
I tried to use anchors, but they had no effect when connecting top of 3 to bottom of 2, got the same layout.
I then tried to create frames with vertical elasticity expand around both rep frame 2 and rep frame 3, and it seems to do the job.
- Repeating Frame1 - gives 1 record, contains all other frames, variable vertical elasticity
- - Frame2 - contains all frames beneath - variable vertical elasticity
- - - Frame3 - variable vertical elasticity
- - - - some boilerplates
- - - - Frame 4 - vertical elasticity expand
- - - - - - Repeating Frame 2 - various number of records, fixed vertical elasticity, height 100
- - - - Frame 5 - vertical elasticity expand
- - - - - - Repeating Frame 3 - various number of records, fixed vertical elasticity, height 30
and so on..
Thanks again

Layout Problem in swings

I have an Layout problem. My Applications consists of a label and a panel in which some more labels are present.
The panel should contain the scrollbar in order to view all the label that excced the size of the panel.This label and a panel should be adjacent to each other.
My problem is, I am not getting the scroll bar to the panel when I am adding the label that excced the size of the panel, when I am adding the label adjacent to this label.

Did you use JScrollPanel? If not, use it.

Hong Kong Tax Forms IR56B SAP standard Layout

Hi All
HK statutory annual tax form IR56B (transaction PC00_M27_CTXB) is generated once annually. There is a SAP standard layout HR_HK_IR56B2002 for this.
However, notice that the layout settings is different from the government layout. A few examples would be
1. Item 11 Particulars of income accruing for the year from 1 April 2007 to 31 March 2008 is divided into 2 lines in the SAP layout while it should only be printed in 1 line in the government layout.
2. The date formatting for items in #11 shouldnt contain any '/'
(i.e. 01/01/2008), should only be 01012008.
Appreciate if anyone may have any insight into how to resolve this. Is it better to customize the layout instead or is the current layout considered acceptable? Thanks in advance.

Hi Anna
You may want to consider the following options:
a) open a OSS message to SAP to report on your observations
b) custom build your enterprise specific IR56B form based on standard layout so that item 11 appears in 1 line and dates will be displayed without "slash"
Thanks

[solved] layout problem in amarok 2.02

Hi,
Here, I have a bad layout problem with amarok 2.02. Amarok does not fit on my screen which is 1400 pixels large! I cannot reduce the part where the collection is shown. So that it is really unpractical to use.
I uploaded a snapshot to illustrate the problem (it is the full screen!):
emmanuelfavrenicolin.free.fr/Public/Sna … ok202.jpeg
Someone have the same problem ?
I tried to install svn version but I stopped after 3 hours of compilation, it is quite a big application.
Last edited by manouchk (2009-05-23 06:28:43)

Well, I tried amarok2-devel 2.0.90-1 but the problem of graphic layout remains similar, no improvement. Is it normall? Maybe amarok is only available for computer with screen >= 1600x1200 or is there an hidden configuration file where I could tweek this?
Last edited by manouchk (2009-05-18 02:41:03)

Urgent: Layout problem in "light inner page"

Hi Experts,
I am facing a problem in portal content area on external facing portal. I see a vertical scroll bar which restricts application from being displayed on entire screen.
I am getting this problem after a patching of EP 7.0, before patching every thing was running fine.
To me it looks like a layout problem in "light inner page", When I use "Light - 1: column (Full width)" layout I get a vertical scroll bar on portal. When I use default layout then this vertical scroll bar disappears but I see an empty navigation bar on left side which is not required.
Can some one advise a solution for this.
-Lave

hi,
Similar problem in this thread. check it out
Desktop inner page lost
Regardss,
Ganesh N

Best way to implement a standard layout across application

What is the best way to implement a standard layout across the application? For example, I am converting an HTML/ColdFusion site to Flex and I need to keep the look of the existing site in the new Flex app. I need a standard layout on every screen in the new app with a standard header, footer and left nav bar. Do I need to add that code to every screen in the app or can I just create on layout file and call that into every screen? Thanks!

There a few that will help you, look for Form and validator.
Sincerely,
Michael
El 16/05/2009, a las 14:01, lee704 <[email protected]> escribió:
>
Thanks. Are there sample data entry apps in the Tour de Flex samples?
>

How to find the standard Layout(Forms) list in India Baseline version

Hi,
Can anyone suggest me how to find the standard layout(forms) in the India baseline version.
i want total standard form(Scripts/Smartforms) name available in India baseline.
Thanks in Advance!!

Hello,
Goto Se710> Do F4 in form. In next screen goto Find->Technical Search function and execute it. It will show no. of forms in the status bar at the bottom.
Cheers,
Balaji

ABAP ALV: Creation of Standard Layouts

Hi,
I have a requirement where in a standard layout need to be created for ALV grid, this should always be avaiable to the user and he should not be able to delete it. As far as I understand, such layouts aer named starting with a number and are transportable. However I don't know how this is achieved ? I need help with regards to creation fo such layouts.
Regards,
Shweta

layouts of ALV grid can be either user-specific either global (then it starts with "/")
in order to transport a layout, you must go to layout administration (displaying the ALV grid, go to menu Settings/Layout/Layout management) then go to menu Layout/Transport
if users are allowed to maintain/change layouts (at both levels user-specific and global) is defined in authorizations and/or inside the program itself

Standard Layout problem

Similar Messages

Maybe you are looking for