Standard menu in module pool.....take ur points.

Hi all,
I want to use standard menu in my Module pool program. Pleas tell me the way for that?
I tried in SE41 by copying status from SAPLKKBL, menu is should but buttons are not working.
Pleas help me.
Have ur points.
Regards,

I assume u have copied the PF STATUS and used SET PF-STATUS in the PBO of the screen.
Now in the menu painter - u can view the Function Codes attached to each and every ICON/Button. In the PAI of the screen - u can handle the User commands.
data : fcode TYPE SY-UCOMM.
CASE FCODE.
WHEN 'BACK'.
WHEN 'CANC'.
ENDCASE.
In the Screen painter attach this variable FCODE to the OK code ( Go to Element list tab).
This will solve ur problem.

Similar Messages

Regarding standard menu in module pool... have ur point.s

Hi all,
I wanna copy stanadard status to my module pool program. Could u pleas help me for that...
have ur points..
Regards,
[email protected]

Hi Pradeep,
Goto SE41--> give the prog name SAPLKKBL and select the Status Radio button and give STANDARD
now press Ctrl+F6 which prompts you a new dialog to enter your desired prog name and status name. give in teh program name and enter a status name, which copies the standarad status to your program.
now in your program set the status using the statement
set pf-status 'NEW_STANDARD'.
Regards
Gopi

How To Create Context Menu In Module Pool

Moderator message: do not offer points
hello guru's
Please help me regarding creation of context menu in MODULE POOL Programming.
pleaase send me link or procedure to create it.
<<text removed>>
waiting for reply
Edited by: Matt on Feb 20, 2009 3:13 PM

Do a search first:
[link1|context menus;
[link2|http://help.sap.com/saphelp_nw04/helpdata/en/e2/5d3bb2e06411d295a900a0c94260a5/frameset.htm]
etc. etc.

Reg. POV in module pool---have ur points...

Hi all,
I m trying to use POV event in module pool, I wrote
PROCESS ON VALUE-REQUEST.
FIELD ZPHOGAT-ROLLNO MODULE ABC.
Here in module ABC is wrote 'break-point'. when i click on F4 help of that field i my break-point is not getting executed.
Pleas help me out...
Have ur point.s
regards,

First make sure everything is compiled, then try an extended check on the main program to make sure you have your variable names, module pool name etc etc synchonised (in case you have a typo in the module or variable name)... then try changing your break-point for "message s398(00) with 'This is my POV' space space space." or something similar.

Reusing Standard Classes for Module pool Programming using Abap Objects

Hi.,
    I debugged the ME21n transaction and found a number of classes such as
         CL_BASIC_MODEL_VIEW_MM
         CL_GENERIC_MODEL_VIEW_MM
         CL_GENERIC_VALUE_MODEL_MM
         CL_MODEL_CONTAINER_MM
         CL_MODEL_CONTROL_VIEW_MM
         CL_MODEL_VIEW_MM
         CL_TABLE_MODEL_MM
         CL_TABLE_MODEL_TREE_VIEW_MM
         CL_VALUE_MODEL_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_BASIC_MODEL_VIEW_MM
        CL_COMPOSITE_SCREEN_VIEW_M
        CL_CUSTOM_CONTROL_VIEW_MM
        CL_EXPAND_BUTTON_VIEW_MM
        CL_EXPAND_VIEW_MM
        CL_FOREIGN_APPLICATION_VIE
        CL_GENERIC_MODEL_VIEW_MM
        CL_GRID_VIEW_MM
        CL_MODEL_CONTROL_VIEW_MM
       CL_MODEL_VIEW_MM
       CL_SCREEN_VIEW_MM
      CL_SETUPVIEW_BUILDER_MM
        CL_SIMPLE_TREE_VIEW_MM
         CL_TABLE_MODEL_TREE_VIEW_M
         CL_TABLE_VIEW_CONTAINER_MM
         CL_TABLE_VIEW_MM
         CL_TABSTRIP_VIEW_MM
         CL_TC_BUTTON_VIEW_MM
         CL_TC_ITEM_VIEW_MM
         CL_TOGGLE_VIEW_MM
         CL_VALUE_MODEL_VIEW_MM
         CL_DEFAULT_CONTROLLER_MM
         CL_CONTROLLER_MM
         CL_ATP_CONTROLLER_MM
         CL_DRAG_DROP_CONTROLLER_MM ..
               How we can reuse these classes to build a custom module pool program which supports MVC architecture as used in enjoy SAP transactions .I am very much confused from where to start .
Guide me on this.I want to create a simple module pool program with Subscreens, Table Controls and Tabstrips ..
Regards.,
S.Sivakumar

Have you got any solution on this.
because i want to use CL_GRID_VIEW_MM->handle_on_data_changed for one of my development related to ME51N.

How can i embed Area menu in module pool screen

Hi All,
I developed a module screen 100 now i have to call area menu in a container can you please help me in this issue or if i am wrong in this way can you please suggest which approach will full fill this requriement.
Manohar

dfgdfg

What is module pool programming?how we can change the standard screen?

Hi EXPERTS
what is module pool programming?how we can change the standard screen using module pool programming ?
please explain with example.

Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
regards,
venkat.

Display the list in module pool program

Hi All,
I want to display the list of material like report after some user command in module pool.
How can I achive the same.
Regards
Sagar

Hi,
   If you want to display in ALV, you can use REUSE_ALV_GRID_DISPLAY FM also, which will call standard program from module pool and will display the list.
If you use module pool, it is not mandatory that you have to use only OO ALV.
You can create list output also from module pool. For that in user command you can write like
IF sy-ucomm = '.....'.
     leave to list processing and return.
     write :/ '..............'.
Endif.
Thanks and regards,
Venkat

Module Pool SAPZPS01

Hi Experts,
I've a module pool program 'SAPZPS01' in SAP 4.7. It's naming convention seems to be different from the common naming convention used.
I want to create this program in ECC 6.0 but it's asking for Object access key...
Any help is appreciated...
Thanks and Regards,
Rudresh

Hi,
naming convention for module pool is as follows:
SAP R/3 Requirements:
Module Pool Screen names must begin with SAPMY or SAPMZ and can be a maximum of 8 characters long.
Standard Format:
Screen module pool names should begin with SAPMZ followed by a 1 character functional descriptor. The last 3 digits of the name should be a unique alphanumeric identifier.
Regards ,
Sooness

Reg. module pool....have ur points..

Hi all,
In module pool programming, we see "MODULE CANCEL AT EXIT-COMMAND" in PAI. Pleas let me know the meaning of this in simple language.....
n Have ur points.

Hi,
AT EXIT-COMMAND, only checks for the function code which is marked as 'E' in PF-STATUS, and the module below that is executed whenever you press that key associated with the function code.
AT USER-COMMAND, works for all keys with function-code.
So if you press F3, which is BACK and is usually associated with 'E' , and if you have both AT EXIT-COMMAND and AT USER-COMMAND, module below AT EXIT-COMMAND will be executed.
MODULE
Syntax
MODULE mod [ AT {EXIT-COMMAND|CURSOR-SELECTION} ]
[ ON {CHAIN-INPUT|CHAIN-REQUEST} ].
... AT EXIT-COMMAND
Effect
Addition AT EXIT-COMMAND at the event PAI causes module mod to be called exactly if:
The function used to trigger event PAI has function type "E"
Into the input field of the standard toolbar, the user entered a character string starting with "E" and confirmed it using ENTER.
The dialog module is called before the automatic input checks defined in the system or in the ABAP Dictionary and independent of its position in the event block. The only screen field transported to the ABAP program is the OK field. If the function that triggered the PAI event does not fulfill any of the above prerequisites, the MODULE statement is not executed.
If several MODULE statements have the AT EXIT COMMAND addition, only the first one is executed. If no MODULE statement has the addition AT EXIT COMMAND, a normal PAI processing is executed: The predefined input checks are executed and then the PAI event block is processed sequentially. Provided the screen processing is not terminated in the dialog module mod, after the return from the dialog module, the complete PAI processing is executed. You must not use the addition AT EXIT COMMAND in connection with the statement FIELD.
Note
The function type of a function is determined in the Screen Painter or Menu Painter. Usually those functions of the user interface are defined with function type "E" that are assigned to the icons Back, Exit and Cancel in the standard toolbar of the GUI status. Therefore, the called dialog module should terminate the screen processing and allow security checks, if required.
reward if it helps..
Regards,
Omkar.

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

Module pool / Screen Prog is there any standard SAP functionality ?

Hi I am creating a Module pool / Screen Prog. On this screen I have nearly 100 fileds , now I want to take print out of all the information shown on the screen for the same is there any standard SAP functionality ?
Does SAP provides any standarar ready made functionality for the same. ?

No, there is no standard functionality for this. dynpros are not designed to "print out". This is what list displays are for. That said, you will need to write your logic to kick off a list display with all of your field values there, then the user can print.
Regards,
Rich Heilman

Reg. cursor-selection in module pool....have ur points.

Hi all,
Pleas. help me with a simple example of at cursor-selection in module pool programming.
with simple code & steps
Have ur points.
Regards,
[email protected]

Hi Pradeep,
The Best explanation with example comes from our help.sap.com....
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbabbd35c111d1829f0000e829fbfe/content.htm
Also this might help...
MODULE mod [ AT {EXIT-COMMAND|CURSOR-SELECTION} ]
[ ON {CHAIN-INPUT|CHAIN-REQUEST} ]
[ SWITCH switch ].
... AT CURSOR-SELECTION
The AT CURSOR-SELECTION addition at the event PAI causes the module mod to be called only if
The function used to trigger event PAI has function code "CS" and function type "S"
The cursor is placed on a single input or output field of the screen at the moment of the user action
The call occurs within the usual PAI processing, meaning that the automatic input checks defined in the system or in the ABAP Dictionary are executed and the MODULE statement is called according to its position in the event block. You can use the addition in connection with the FIELD statement.
If the PAI event is triggered under the above circumstances, the function code is not passed to sy-ucomm and the OK field. They keep their previous values.
Note
The function type and function code of a function are determined in the Screen Painter or in the Menu Painter. We recommend to assign function code "CS" in the Menu Painter to function key F2 in order to simultaneously assign the double-click function of the mouse to it. This allows you to assign dialog modules to the selection of input or output fields.
Refer thread: Re: MODULE REQUEST
Hope that helps!!
*Reward useful answers*
Regards,
Naveenan.

How to take backup of an entire module pool program with code,screen,etc.

Hi experts,
I have some important data in the ides server for which i want to take backup of them.
I have some question regarding the same.
1.How to take backup/download of an entire module pool program with code,screen,etc.
2.How can we take backup/download for a DB table with its structure?
3.How can we take backup of a search help?
Please give some suggestions abt the same.
Regards,
Ashesh.

Hi,
May be just for viewing, try downloading from SE80 transaction from the others option.
Here just try issuing the print, it will generate the spool.
Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
The only issue is, may be you need to take all the screens separately.
Regards,
Santhosh.

Module Pool Programming - Calling SAP Standard Text Screen

Hi Gurus
I am working on Module Pool Programming...In the one of the screen there is a column named "Description" where I need to keep a Button to call a SAP standard text editing screen and what ever information I enter in the field should be downloadable
is this option possible?If so...Plz send me the Sample code
Thanks
Ganesh

Hi Gani,
I can help you till getting the text editor in your module pool program.
TOP
PROGRAM ZREDDY_TEXT.
constants: line_length type i value 132.
   data:
reference to wrapper class of control
   g_editor type ref to cl_gui_textedit,
reference to custom container: necessary to bind TextEdit Control
   g_editor_container type ref to cl_gui_custom_container,
   g_repid like sy-repid,                        " getting program name
   g_ok_code like sy-ucomm,                " return code from screen
   g_mytable(132) type c occurs 0,        " getting the text of table
   g_mycontainer(30) type c,                " string for the containers
   v_result(256) type c,                        " getting the text of table control
   gw_thead like thead,                        " for header information
   it_line type table of tline with header line. " internal table of type tline
PBO
MODULE STATUS_0900 OUTPUT.
SET PF-STATUS 'ZTEXT'.
SET TITLEBAR 'xxx'.
if g_editor is initial.
create control container
   create object g_editor_container
   exporting
   container_name = 'CUSTOM_CONTROL' " Make sure when you create custom container in layout give name as Custom container
   exceptions
   cntl_error = 1
   cntl_system_error = 2
   create_error = 3
   lifetime_error = 4
   lifetime_dynpro_dynpro_link = 5.
   g_mycontainer = 'CUSTOM_CONTROL'.
create calls constructor, which initializes, creates and links
TextEdit Control
create object g_editor
   exporting
   parent = g_editor_container
   wordwrap_mode =
cl_gui_textedit=>wordwrap_off
   cl_gui_textedit=>wordwrap_at_fixed_position
cl_gui_textedit=>WORDWRAP_AT_WINDOWBORDER
   wordwrap_position                      = line_length
   wordwrap_to_linebreak_mode     = cl_gui_textedit=>true.
   refresh g_mytable. " to initialize table upon OK_CODE 'BACK' at PAI
   endif.
ENDMODULE.                 " STATUS_0900 OUTPUT
Cheers!!
Balu
Edited by: Balu CH on Oct 22, 2008 8:55 PM

Standard menu in module pool.....take ur points.

Similar Messages

Maybe you are looking for