Standard smartform for Goods receipt slip version 3

Hi all,
I need to copy and modify a smartform for Goods receipt slip.
How do we find out the main program(driver program) for a smartform.
<b>In my case the smartform name is /SMB11/MMGR3_A</b>
Regards,
Kaushal

I used /SMB11/BL_MMGR1_L in my choice and I then searched programs using /SMB11* until I found something that looked like a match in it's text.
I can only tell you that after configuring via tcode NACE application ME and output type WE03 (because again the text matched what I was wanting to do) with program /SMB40/M07DR it did give me the results I wanted. This is a specific answer and NOT the more general answer you might have really wanted. There is much discussion in forum for that more general question. Personally until SAP sees the wisdom of maintaining a table to make a more direct search key more possible rather than a full SAPSCRIPT, SMARTFORM, PDF search we have some agony to endure.
Now if can you tell me where (table & fields) number of containers found on tabstrip Quantity of tcode MIGO is stored and we can call this even.
GOITEM-ANZGEB is NOT the answer I want to hear as structure names do not count and it is not defined in any structures of the global settings.
Good Luck!!!

Similar Messages

Standard sapscript / smartforms for GOODS RECEIPT

Hi,
Can anyone tell me standard sapscript / smartforms for GOODS RECEIPT
-John

Here is your answer from NACE
Output type WF01 or WF02
Application ME
Program SAPM07DR
Form routine ENTRY_WF01 or WF02
Sap script: WE_FERT_VERS1 or VERS2 (this is for GR for prod. orders)
Or
Output type WE01 or WE02
Application ME
Program SAPM07DR
Form routine ENTRY_WE01 or WE02 or WE03
Sap script: WESCHEINVERS1 or VERS2 or VERS3 (this is for GR for normal purchase orders)
I would suggest you use the latest version.

Standard smartform for Purchse requesition slip

Dear Friends,
What is standard smartform for Purchase requisition slip
Regards,
Reddy

hii
standard program for purchase requesition is SAPMM06B.but not smartform .check it i hope it will help you.
regards
twinkal

Output type settings for Goods receipt slip form

Hi gurus,
I am new to SAP and i am trying to write a functional spec based on a Goods receipt slip template the company has given me.
can anyone tell me the standard forms and programs associated with the Goods Receipt form.also i would appreciate if someone can help me do config settings for this.
thanks and look for ward for suggestionas and help.
Chris

Dear Chris ,
You can get all data needed into tcode NACU !
Choose Application ME and messages WE01 until WE03. Inside this customizing you can see all details that you need.
best regards,
Carlos Moçatto

Standard IDOC for Goods Receipt

Hello ppl,
I have a requirement wherein I need to trigger an IDoc whenever a Goods Receipt is saved.
Is there any standard outbound IDoc for this functionality?
Please help.
Thanks,
Dawood.

HI
Trigger an Idoc when GR is saved.
Re: Idoc type for Goods Receipt
Regards
Pavan

Standard Objects for Goods Receipt and Invoice

Hi experts,
Is there any Standard Object for Creating Goods Reciept and Invoice in SAP other than standard BAPIs

Try to use the PROCESSKEY standard infoobject (BWVORG in R3/ECC) to discriminate the good receipt from the invoice one...
An other option is create a custom generic data source with a view on EKBE table and use the EKBE-VGABE field to discrimate them.
Regards.

Language control for Goods Receipt Slips from MIGO

Hi All,
We are trying to print a Goods Receipt in Finnish via MIGO.
The Finnish version of the SAPScript form exists and is active, the corresponding Plant language is set to Finnish, and we are logged on in Finnish. When we perform the Goods Receipt, the form prints in English.
The entry on NAST, the message table, is generated with an English Language Key.
I am sure there must be a setting, or combination of settings which control the form output language, but have been unable to track it down (I am an ABAP developer with limited knowledge of config).
Can anybody help?

Hi Manohar,
Thank you for that suggestion - I couldn't create entries in MN21 because they already existed, but you got me to the right place.
Under MN22, I found that the printouts for these documents were all set to EN, so I just removed the language key.
They now print in the logon language, which is what we need (might be English or Finnish).
Best Regadrs
Robin

Ask LSMW Standard Object for Good Receipt

Dear All,
I`ve requirement to do Good Receipt for Purchase order and Production Order..but they asking whether that requirement can be done using LSMW.. Please kindly advice.
thks

I repeatedly do this with LSMW by recording method. (recording done once and using repeatedly)
The recorded template is
EQUNR KLART CLASS_01 STDCL_01
If it is the case of Functional Location TPLNR in place of EQUNR.
May try this way.
Regards
Jogeswara Rao

Standard smartforms for SD-Notification, Service order, Rental agreement

Hello all,
Could anyone let me know if any standard SMARTFORMS
available for
Notification - SD
Service order - SD
Rental Agreements - SD
Reminder for order confirmation - MM
Goods issue - MM
Physical inventory slips - MM
Spare part labels - MM
Is there any SAPnotes available for this.
Awaiting your reply,
Thanks,
Balaji

Standard Smartforms
PO ---> /SMB40/MMPO_L
Request For Quotation ---> /SMB40/SDINQ_L
Invoice ---> /SMB40/SDINV_L
Delivery Note ---> /SMB40/SDDLN_L
Sales Quotation ---> /SMB40/SDQUO_L
/SMB40/SDPIK_L                 Picking List
/SMB40/SDSDA_L                 Scheduling Agreement
/SMB40/SDDLN_L                 Delivery Note
/SMB40/FIDUN_L                 ACC-FI-Dunning
/SMB40/MMCON_L                 Contract/Scheduleing Agreeme
/SMB40/MMDLS_L                 Delivery Schedule
/SMB40/MMGI1_L                 Goods Issue slip version 1
/SMB40/MMGI2_L                 Goods Issue slip version 2
/SMB40/MMGI3_L                 Goods Issue Slip version 3
/SMB40/MMGR1_L                 Goods receipt slip version 1
/SMB40/MMGR2_L                 Goods receipt slip version 2
/SMB40/MMGR3_L                 Goods receipt slip version 3
/SMB40/SDCSH_L                 Cash Sales

Print Prog-Auto Print Barcode Label for Goods Receipt(MIGO) using Smartform

Hi Guru's
I have created a smartform that prints barcodes on a label.
My tests print successfully to the Printronix thermal label printer.
Is there perhaps a SAP Standard print program that i can use in my output type that will call my smartform upon goods receipt(MIGO)?
please bear in mind that i am looking for a print program that calls a SMARTFORM. not a sapscript.
/SMB40/M07DR does not exist on my system. and I am going to use output type WEE1 - for LABEL Printing
Awaiting your feedback.
Thanks in advance geniuses!

Good luck dude,
In that same program I noticed We01 that will print a smartform GR. I think if you use form entry_we01 in your output control you should do well.

Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

Standard Work Flow for Goods Receipt

Hi All,
I am working on Work flow is there any standard work flow for Goods Receipt?
If so please help me in this regard.
I found a BO BUS2017. Is this right one?
Thanks.
Ranganadh.

hi,
Refer to the link.
Automatic mail sending for goods receipt
Regards
Sumit Agarwal

Output type for goods receipt

Hi guys,
Can any one lemme know what is the output type we can use for goods receipt- for generating a goods receipt smartform output?
and can u also lemme know the standard print program also.
if u have written any zprint program plz send it ASAP.
thanks n regards,
Bhargava.

u can see the output types for Goods Receipt in Transaction NACE. Application M1
Output type        Name
CHKL     Count List ( Program RTCHECKL, form RT_CHECK_LIST)
GRPL     Pallet Sticker ( Pro RTCHECKL, form RT_PALLET_LABEL)
The Form names mentioned are SAPSCRIPTS not smartforms.
Also Bhargava, chk out with ur Consultant wat output type suits ur requirement coz there r multiple options as u can see for urself in NACE under Applications M1/ME.
Hope it helps.
Regards,
Bikash
Message was edited by: Bikash Agarwal
Message was edited by: Bikash Agarwal

Error in customized smartform for goods recipt

Hi experts
I have created a customized smartform for goods recipt .
I have used form entry_we01 inside my zprogram and basically fetching the material document no from NAST-objky
The problem is when i assign my program in TXN NACE
it prevents the update of material document no MBLNR in the
MSEG table .
I get an express document as soon as I try to display the goods recipt stating " UPDATE HAS BEEN TERMINATED".
and although material document has been generated it is not updated in the MSEG table.
By the way this error does not happen when i use the standard driver program and standard form (SAPSCRIPT).
Please suggest a solution

Hi,
Your problem may not be related with what you done in NACE.......Check for any other recent changes made in the System...

Goods Receipt Slip Requirement

Dear Experts,
I am developing a FORM which is the "Goods Receipt slip" with "WE03" output type.
My Boss want to add 3 informations into the FORM header:
1.Inbound Number : (Available in VL33N) LIKP-VBELN
2.Transportation Number : (Available in VT03N) VTTK-TKNUM
3.Shipment Number : (Available in VI03) VFKK-FKNUM
Now i try to finish this requirement.....
The first information i can use MKPF-XBLNR directly output to the form. It is easy ...
And the second information i can write ABAP code, select the VTTP table and get the TKNUM field throught link the delivery note number ....
(Question : Is this logic correct ? My sense tell me that probably it is incorrect because of i am selecting the items data... usually, the delivery note number are placed in the header table.... Does it has another beatiful solutions ?)
Third, the shipment number. I found it in VFKK table as well, but it is the same situration. It placed the Transportation Number into the item Table VFKP as a reference field.... i need the Transportation number to make a WHERE statement ...
Has someone can give me advise ?
Thanks in advanced,
Carlos Zhang

Copy ur SAP Standard Script to Zscript and this zlayout should assign One output type,probably this would be new output type.
Output type configured by Functional Consultant and give ur Layout name so that he will configure.
Depends on Ur requirement we need to use print Program.
If there are so many changes and need to modify lot of things then i would prefer Copy ur print program to zprint program and do the changes.
if not do not modify (I mean only layout like windows modification).
if you do not modify print program and eventhough you need to get data from some other tables ,.. use
/: PERFORM NAME IN PROGRAM NAME
/: USING VAR1
/: USING VAR2
/;CHANGING OUTPUT.
/:ENDPERFORM
Call your form routine in se38 by creation of program and this form routine will use ITCSY Structure..
Reward Points if it is useful
Thanks
Seshu

Standard smartform for Goods receipt slip version 3

Similar Messages

Maybe you are looking for