Standard User Lic upgrade to Professional Lic for CUMA

Hi NetPro.
my company is going to purchase CUMA server , however my current user lic which all in Stand only. however, i am thinking to upgrade them to Professional in order to use the feature of CUMA . however, i am stucked in the Dynamic Tool generator as i can't just generate the Lic from Std to Pro.
Appreciate your guidance .
Regards.
Kitten

Hi Ron, this is pretty strange, no idea how gMail turned into MobileMe accounts, but that info is in the main .plist
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
MobileMe is gone, but Mobileme addies work on iCloud.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

Similar Messages

Standard users forced default "run as administrator" for acrobat.exe X pro

The software has been reinstalled and patched CS6 all componets of CS6 run fine under a standard user account with the exception of Acrobat Pro. Acrobat Pro runs fine when an administrator is logged in BUT when a standard user logs into the computer all application shortcuts and even direct execution of the exe insists on "running as administrator", seeing as though they are not an administrator they can not run Acrobat Pro X. Any assistance would be grealtly appreciate.

I'm not saying Norton is your problem, but I haven't heard good things about Norton software in a long time, unfortunately.
I always recommend Avast! antivirus to people. The free version is very good in itself, and they offer a more comprehensive Internet Security version as well.
I don't know how technically-oriented you are, but if you do understand how things work fairly well and have taken measures and adopted good practices to avoid running malware, there is the possibility of just shutting off UAC (MIcrosoft User Account Control) if its operation continually gets in the way of your completing your work. Typically, most people just get in the habit of confirming whatever prompts come up anyway, which defeats most of the protection UAC can afford.
-Noel

Finder is not available for standard user

Hi,
I recently installed OS X (10.8.2) from app store. We created "Data" folder and created few admin and non admin users. Granted access to both users to same folder. When admin logged off and standard user logged in, he could not find Finder. Repeated this with 8 standard users and Finder is not available for all 8 standard users. For 2 admin users Finder is available.
We did not change any settings whatsoever, so not sure this behavier is by design or I am missing something.
Please help
Thanks in advance.

Are you running OS X 10.8 client or Server (is Server.app installed)? If you are using OS X Server, are these local accounts or network accounts?
What do you mean by "could not find Finder?" As in could not log in? Could not access this 'Data' folder in Finder?

Standard user cannot install apps

I have setup a Mac Mini in my office for several people to use, with me as Admin and others as Standard account. The problem is, when someone wants to install an app, they always get a prompt to input the Admin's username and password. From my research, I was under the impression that Standard users could install apps, but only for their own account, which is what we want. But for some reason, it's not working that way. I did a Google search and following one recommendation, used Disk Utiltiy to repair permissions on the hard drive of both the Admin and Standard User account in question, but with no positive result. I'm a bit reluctant to just give Admin privileges to one person; then others will may ask for the same privileges. What should I do?
Thanks,
HL

It sounds like they are trying to install an application in a location that they do not have permissions for (the main /Applications folder, for example). They will need to use a location inside their own account that they have access to - usually this would be in a different Applications folder that has been created in their own account. There are a few badly written applications that expect to be installed and run from an administrative account, but fortunately there aren't too many of those.

How i can change to standard user, an admin user

Hi,
How I can change to standard user an admin user, if the check box can not be unchecked.
I have opened the lock to allow for future changes.
I have more than one admin user.
As root user, I can't do it.
Thanks.

Hi,
I have, but looks the same, unable to change.
I finally decided to create a new standard user and delete this.
Thanks for the support.

Using an adobe acrobat professional lic for a standard version.

I have a question in regards to EULA. I have 10 machines and 5 acrobat std lic and 5 acrobat professional lic. Can i use the professional lic and install standard on those machine only. for example can i install acrobat standard on all ten machine even though i have 5 lic for standard and 5 for professional. I know professional and standard have different .exe files. but can a professional lic be used as a standard lic. meaning can i downgrade

I don't have an answer to this particular case, and I am not a lawyer,
but in general the answer would be no: rights to downgrade would have
to be explicit, as no rights not granted by the EULA apply (unless
additionally granted by law).
However, Adobe Customer Service might be willing and may be able to
grant permission.
Aandi Inston

Win7 PC won't run upgraded photoshop CC (2014) as standard user

Since upgrade from photoshop CC the PC won't run using the standard user account (which is on the office network) but only run as local Admin (which doesn't have access to the office network).
when opening photoshop CC 2014 the PC prompts for local admin rights, then can't see the files on the network drives.

Thanks Jeff. The user is a standard user. He's been using Photoshop CC on this same PC for a long time. Photoshop CC (2014) is not crashing.
In order to upgrade, I had to switch to the local admin account, upgrade was successful.
When my standard user logs back in using his personal, standard user account, he is prompted for Admin credentials when he opens Photoshop CC (2014). He enters the admin password, but he then can't access the files on the network, as the local administrator doesn't have access to the network. This happens every time.
He has no problem running inDesign, or the old version of Photoshop, or any of the other suite of products.

Upgrading a standard user to administrator

Is it possible to upgrade a standard user to administrator status or to change administrators from one user to another? I bought a used MacBook running Yosemite and need to make myself the admin. Thanks for any suggestions.
Michael

Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(116372)

Upgrade a license from Adobe Acrobat Standard XI to Adobe Acrobat Professional XI?

Can i upgrade a license from Adobe Acrobat Standard XI to Adobe Acrobat Professional XI? and pay only the difference, or i have to buy a full license?

As I remember some of the posts long ago, I am not sure the possibility for upgrade is too good. At one point as I recall you essentially had to pay the upgrade cost. All of this is from a not too good memory and I agree that the only way to find out for sure is to call Adobe. It would be useful for us if you reported back on what you find out.

I can't seem to get Firefox to open links in Thunderbird, for ex. and when checking defauts, it doesn't show up in my standard user profile (Win7)

I've tried a few browsers, but want to go back to only Firefox as default browser. I can find it and allocate it in the Administrator profile, but not my daily use, standard user. It doesn't even appear in the list of programs to assign defaults.
And when I click on a web link (in Thunderbird, for ex.) I have to copy and paste it in Firefox to go to the page.

This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

Best practice standard User Acess Test for WIN2012 AD

What is the Best practice standard User Acess Test for WIN2012 AD

Hello,
as before, add a computer to the domain and log on with a domain user account to the computer.
You should be able from the client machine to open the sharedfolders on the DCseither with:
\\DCName\sysvol
\\DCName\netlogonor \\NetBiosDomainName\sysvol
\\NetBiosDomainName\netlogon
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Auto update flash player for standard user without notification

Hello, I hope I don't ask an already answered question, I've searched around without finding precisely what I'm looking for, but if I've missed something please point me in the right direction.
I'd like to know if there is a way for flash player to be automatically updated while a standard user is connected (no admin rights) and without any notifications.
So far I configured the mms.cfg file (in c:\Windows\SysWOW64\Macromed\Flash for a win7 64bit) with those settings:
AutoUpdateDisable=0
AutoUpdateInterval=0
SilentAutoUpdateEnable=1
SilentAutoUpdateVerboseLogging=1
(the autoUpdateInterval=0 is for testing, I plan to put a 7days delay
I plan to update all our clients with the latest version of flash player via sccm and add this file during the process.
Then I hope that I won't have to push any other updates (until I guess version 11.5 or maybe even 12...)
Will those settings will work as I intended?
As we'll use 32 bits browsers do I need to put this file also in c$\Windows\System32\Macromed\Flash ?
If it wont work, is it doable?
thanks!

Hi ersatyle,
Thanks for clarifying.
will flash player be automatically updated while a standard user is connected (no admin rights) and without any notifications.
By pointing the Background Updater to an internal server, yes.
Are those settings will work as I intended?
The AutoUpdateInterval setting in the mms.cfg has no effect on the Background Updater. AutoUpdateInterval can only be used for the notification updater. If you're setting up background updates from an internal server, this property is best dropped from the mms.cfg to avoid confusion. The other settings will work as expected. Once you have your clients set up and tested, I also recommend dropping SilentAutoUpdateVerboseLogging, since this will reduce the size of the log file.
As we'll use 32 bits browsers do I need to put the mms.cfg file also in c$\Windows\System32\Macromed\Flash, If it wont work, is it doable?
There is only one location for the mms.cfg. The same file is used for 32-bit and 64-bit browsers. From the administration guide, page 22:
mms.cfg file location:
Assuming a default Windows installation, Flash Player looks for the mms.cfg file in the following system directories:
•32-bit Windows - %WINDIR%\System32\Macromed\Flash
•64-bit Windows - %WINDIR%\SysWow64\Macromed\Flash
Note: The %WINDIR% location represents the Windows system directory, such as C:\WINDOWS.
I hope this answers your questions. Let us know if there's anything else.
-Stephen

Reader not showing pdf with long file names in IE8 for standard user

Hi,
I have this problem for standard users, that is, not Admin level. Admin level users have no problems.
If a web site opens up a pdf file with java, usually in a new window, and the file name is very long (I haven't figured out how long, but visually long) then the reader plug-in won't work and opens a blank page. If the file name is small then there is no problem, and reader opens the pdf without problem.
Interestingly, if I edit the document name (say for example the link has something on the end like "&Doc_Type=Statement" which is obviously not part of the document name but part of the SQL used to find the document by the web page) then reader will open the file no problem.
Again, this doesn't happen for Administrative level users.
Any ideas on how to fix?

I'll crosspost to the reader forum.
Yes, reader works in all other situations.

Oracle Provider connectivity issues in 2008 server (for Standard Users)

Hi
We're using Windows 2008 R2 server and installed a VB application. The application has the capability to connect to Access, SQL Server or Oracle Datbase using OLEDB providers. When I login as "Administrator", the application connects to all three databases.
But, When I login as "Standard user" in the server and try to connect to the Oracle Database (using Oracle OLEDB provider), the application errors "Database server doesn't exist or Access denied".
We are using Oracle 10g (oraops10.dll, version 1.102.2.20) client. We have also provided the full access rights to "Authenticated Users" and "Users" account in the server and still get this error.
Any suggestions/ideas, why this error occurs?

I don't think, you're correct.
As mentioned in my post, the application works fine when I logged as "Administrator". Only for the "Standard users" logins, the application doesn't work.
The Windows Server restricts the oracle database connectivity for the standard users. My questions, does oracle require "special permission" for certain folders, so the standard users can connect to the oracle database.?
Regards, Karthik

Can't change home directory for standard users (admin is OK)

I'm can't relocate home directories for standard users. Relocating works fine for admin users.
When a standard user logs in, they get a message (paraphased) saying "the home directory is not available. If it is located on a server, the server might not be online". If I change the standard user to admin, this message goes away, and everything is fine.
I created a standard user
moved the home directory using the terminal as root: mv UserName /otherlocation/UserName
I then went into users and groups, other options and changed the home directory location.
Rebooted, then tried to log in as the standard users.
Next try - Deleted the standard user and created the same user with admin rights. Followed the above steps and everything works fine.
I don't want this user to have admin rights on my system. Any ideas

Hi,
the AFP is has always been switched on. As for the path I believe this to be correct. The path I am using is:
afp://musicserver/Users
I'm not at the server right now so I mat have got the afp and : and / in the wrong order here but they are correct on the server.
This however does not seem to put the a folder in the Users folder. Could it be something to do with my external hard drive? I am using a Mac Mini as our server (not ideal but fine for us, or at least was) this is booted from our external hard drive. This is the main system drive which is where the Users data is also stored. I have tried all possible paths I can thing of from replacing the 'musicserver' with the IP address. I have also tried adding the name of the drive to the path (System) but all does not work.
Are you able to suggest anything I have missed? Perhaps I'm doing the path wrong?
Thanks again
Chris

Standard User Lic upgrade to Professional Lic for CUMA

Similar Messages

Maybe you are looking for