Standard WD applications in portal modification
Hello,
I have to modify standard Webdynpro content for portal 7:
- user profile webdynpro page:
sap.com/tcsecumewdenduser/com.sap.security.core.wd.enduser.UmeEnduserPortalApp/base
- UWL configuration webdynpro page:
sap.com/tckmcbc.uwl.ui~wd_admin/com.sap.netweaver.bc.uwl.ui.admin.config.Configuration/base
Do you know how I can get sources f these 2 applications...
Thanks in advance,
Nobody?
Similar Messages
-
How to use the Portal Connection Service in a standard J2EE application
Hi,
We want to use portal connection service to connection backgend system from a standard j2ee application.
But the connection need a connectionProperties object which is created in this way:
ConnectionProperties connectionProperties =
new ConnectionProperties(
request.getLocale(),
request.getUser());
Because the "request" object is IPortalComponentRequest object, which is a portal object. In our standard application, we can use this way.
So how?
Thanks and Best Regards,
Xiaoming YangDoes anybody has any idea? Many thanks and points will definitely be awarded.
Best Regards,
Xiaoming -
Integrating SAP UI5 application in Portal through LPD_Cust gives error
Hi Team,
In our scenario we are calling sap UI5 application in portal through LPD_Cust . We receive error SAP UI5 mobile is not supported in your browser . When we call same application through portal directly it opens properly( In both cases we are using same page and iView).
We have set the property of iview in portal as open in header less window in standard mode.But in Lpd_cust we don't have option of open in standard window.
Is there any work around available which launches application properly.I think you are experiencing problems thru the document mode of your browser.
The Quirks of Browser Rendering
1) If you are running ldp_cust, you could open the page properties in a new window.
2) set the document mode for the portal: Ajax Framework Page - Portal - SAP Library
iView: Browser Document Mode ( com.sap.portal.BrowserDocumentMode )
This iView adds an X-UA-Compatible header into the framework page that affects the Browser Mode and the Document Mode in Microsoft Internet Explorer. The default value is IE=EmulateIE7 that sets the Browser Mode in Microsoft Internet Explorer to IE7 Compatibility View and the Document Mode toQuirks .
If you are supporting IE9 standards mode, use IE=Edge. Remember that ALL applications in your portal need to support this!
3) See if the problem is the document mode. When you open the SAP UI5 application, press F12 and change the browser mode to Standards. -
Default values for standard WebDynpro application
Hi all,
We are using standard WebDynpro applications (as an example Leave Request as part of ESS).
Are there any functionalities in a standard WebDynpro to set a specific field initially (default value for a dropdown list for example) via the url?
To be more concrete:
On a specific portal page I would like to call the Leave Request application with the Leave Type set to the parameter I passed via this url (e.g. http://mywasserver:50000/webdynpro/dispatcher/sap.com/ess~lea/leaveRequest&leavetype=Exceptional%20Leave)
Any thoughts are welcome.
Regards,
NoelAt the default inplug of your interface view create a parameter that you need to access for e.g LeaveType in this case.
The variable will recieve the value automatically from the url.
Set the value in the context variable of the component controller and then access it from the view.
Hope this link would be helpful
Re: Can we pass parameters in querystring of the webdynpro application?
Message was edited by: Noufal Kareem -
Standard WDA Application - Change UI element image
Dear All,
SNC 5.1 Out of Box solution provides its Web UI in the form of WDA appications.
1. How do I change the image of a UI element for such a Standard WDA Application.
2. Also, is it possible to do the modifications in such a way that only a certain group of users can see the modified UI element and the rest see the standard Out of box solution?
Thanks and Regards,
AshwinWorst case scenario, you could use the Enhancement Framework to extend the existing application. You can't modify existing UI element - but you can hide existing ones and then add a custom one. You could also add pre- or post- method implementations. Here is some details on the Enhancement Framework specific to WDA:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/f4b9422e0fb911e10000000a1550b0/frameset.htm
However you might find that you can acomplish what you want using Customization.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b170d256293c5ce10000000a421937/frameset.htm -
Opening the current screen of a application from portal in a new window
Hi,
We are using EP 7.0 with ECC 7. A Iview is created in portal for a ABAP webdynpro application and attached to a role and that role is attached to a user.
When the user invokes the Iview in portal the ABAP webdynpro application is opened, when a button is clicked in this first screen another screen is shown. From the second screen using portal functionality to open the contents of the screen I tried to open the second screen in new window by using the short cut "Open in new window", but this option opens the first screen instead of the current screen.
Is it a standard behaviour or some issue with this.
Is there anyother option to print the ABAP webdynpro application from portal
Regards,
H.K.Hayath Basha.Hi H.K.Hayath Basha,
Try to put in Button action cod for open in new windows.
Regards
Eduardo -
Copying standard blueprint application
Hi,
How do i copy standard blueprint applications into custom and make changes to it. My doubt is i need to copy at which level (i.e.), application or application set or even copy of fieldgroups has to be created.
Can anyone please tell me the necessary things needed to make a copy of standard blueprint application.
Thanks and Regards,
karthik.Hi
To start BAB
CRM>LAYOUT OF USER INTERFACE>APPLICATION/LAYOUT>BAB.
Change in to edit mode
create your own view ZCRM_##view for your groups##
save your entries.
BAB is started now new window.Select Application CRMM_ACCOUNT and view ZCRM_##
Create your own customizing request.
open the save menu.
Insert field
open the menu insert>field.
Place it on the screen.
Save your changes.
Check changes in the portal open account Application you want be able to see the changes because you havent set the paarmeters .Inorder to set the parameter
Go to SE80
Select BSP_APPLIACTION
Type in CRM_BSP_FRAME
Press the display icon.
open folder "pages with flow logic"
slect page "select.htm"
Click on right mouse button "test"
Type in ur user name and password.
Select the application.
Click in to the end of the URL and term &blview=ZCRM100##to URL string .
Press enter to relaod the application .
Now you would be able to see the changes.
I hope it helps you and solves your problem.
Regards -
SSO between Portal Application and Portal Admin Tool
Hi All,
We have a requirement for implementing SSO between a Portal application and
Portal admin tool.
We are using WL Portal 8.1 SP4.
Here is the reason for this requirement -
A user logged-into Portal Application needs to login to Portal Admin tool to
do some admin activity. We want to provide a link in the portal application
using which the user can directly login to the Portal Admin tool without
having to enter the credentials again.
If someone has any info on how to implement this, can you please point me in
the right direction.
Thanks,
~DeepakHi,
When creating PP you have 2 options
PP used for compiling and PP used for Building
You create PP with all the libraries into Developing/Compiling Other DCs
And another PP with all the libraries into can be packaged into other build results (SDAs).
Once you have these 2 PP in place you add the DC as used DC.
And this should resolve the issue.
Hope this helps.
Cheers-
Pramod -
Problem with Application Server Portal 9.0.2.0.1.
I have a problem with Application Server Portal and Wireless 9.0.2.0.1.
Firstly I've installed the infrastructure on a Pentium 3 866Mhz 512Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've maintained all predefined settings and I've chosen the UTF8 character set.
After installation, my infrastructure and OID works fine. The OID has port 4032 (as set by Oracle Universal Installer) instead of predefined 389.
After this I've installed Application Server Portal and Wireless on another host: a Pentium 3 733Mhz 384Mb of Ram, with Windows 2000 Server (Italian) service pack 2.
I've also maintained all predefined settings and automatic configuration of Portal and Wireless. I've pointed to my Infrastructure.
Try to test the Portal demonstration but an error occurred:
"SERVICE TEMPORARILY UNAVAILABLE. The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later."
On my EM Console I see: component instances 'OC4J_Portal' and 'OC4J_Demos' are UP, instead 'Portal:portal:7777' is down.
On the component lists I've clicked the link of component instance Portal:portal:7777, the 'control services' and 'Accessible Server SSO' are started, while 'Accessible Portal Repository' is down.
What can I do to get my portal started?hi,
i have exactly the same problem. did you solve yours?
any suggestions or help how to do it?
thanks
erik
please reply to this post or [email protected] -
How to connect oracle application server portal to MS access DataBase
Hello,
I am facing one problem here.
Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portalThere is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
Tak -
Issues while running a WebDynpro Application through portal.
Hi,
I am trying to execute a webdynpro application through portal and facing some issues. I hope to get a significant help from the experts:
> Initially, a report is called from the portal which in turns calls the WebDynpro Application.
> After this, I am again trigerring "FIRE" event in order to go back to report.
At this step, portal shows a message "The Page Can Not be Displayed". Browser link field contains the event name which I am passing to the Fire Event.
Can anybody let me know the root cause for this issue? Below is the piece of code that I am using for navigating from Webdynpro to Report.
l_sapgui_manager->fire(
EXPORTING
name = 'INDI'
parameters = lt_parameters ).
lt_parameters contains some field values which are required in the report.
Thanks,
AshishNo Solution
-
Error while deploying WDA application on portal.
hello Friends,
i am getting this error when eevr i try to check my WDA application on portal.
can you please help me?
note:my its connection is not establishing.
is this the cause of error?
The URL http://duetserver:8006/sap/bc/webdynpro/sap/z57316_portal_event_send/ was not called due to an error.
Note
The following error text was processed in the system EC1 : Die URL enthält keine vollständige Domainangabe (duetserver statt duetserver.).
The error occurred on the application server DuetServer_EC1_06 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system EC1 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server DuetServer_EC1_06 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server DuetServer_EC1_06 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: DEVECC -l: E -s: EC1 -i: DuetServer_EC1_06 -w: 1 -d: 20070614 -t: 142215 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
thanks,
Nutan.you need to set up FQDN fully qualified domain name.
instead of http://duetserver:8006/....you need to use
http://duetserver.domain.com:8006/...
check
1. whether WAS settings in system definition in portal is with FQDN
2. check whether ABAP system FQDN is done. (its in the profile parameter icm/host_name_full (you can run abap report RSPARAM and check this.) -
Error while deploying application on portal domain
Hi All,
I am getting following error while deploying application on portal domain :( :( Not sure what I am missing.......
Anyone has any idea on this???
<Oct 6, 2010 7:49:03 AM EDT> <Warning> <com.bea.wlw.netui.pageflow.internal.WebLogicURLTemplateFactory> <BEA-000000> <In webapp <Workshop Application>, the url template <http://{url:domain}:{url:port}/{url:path}?{url:queryString}{url:currentPage}> uses the {url:port} token. The system may not pick up the correct ports if you are using a proxy server. Consider hardcoding the ports in a production environment.>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <com.bea.p13n.util.jdbc.internal.JdbcSequencer> <BEA-000000> <Cannot allocate sequence block:
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 7:49:05 AM EDT> <Error> <netuix> <BEA-423147> <Exception [javax.transaction.TransactionRolledbackException: EJB Exception: : javax.ejb.EJBException: SQL Error while trying to createMarkupDefinition: SQL [insert into PF_MARKUP_DEFINITION ( MARKUP_DEFINITION_ID, MARKUP_NAME, MARKUP_TYPE, WEBAPP_NAME, MARKUP_FILE) values (?,?,?,?,?)] database error code [0] SQL state [null]. Possible markup duplication of [
MarkupDefinition:
webAppName = plassPortalWeb
type = Menu
name = multiLevelMenu
file = /framework/markup/menu/multilevel.menu
beginXml = <netuix:multiLevelMenu $(markupType) $(markupName)>
endXml = </netuix:multiLevelMenu>
MarkupDefinitionId = null].; nested exception is: java.sql.SQLException: Cannot call commit when using distributed transactions
java.sql.SQLException: Cannot call commit when using distributed transactions
at weblogic.jdbc.wrapper.JTAConnection.commit(JTAConnection.java:349)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.allocateSequenceBlockNewTx(JdbcSequencer.java:626)
at com.bea.p13n.util.jdbc.internal.JdbcSequencer.getNext(JdbcSequencer.java:456)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionDelegate.createMarkupDefinition(MarkupDefinitionDelegate.java:785)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManagerImpl.createMarkupDefinition(MarkupDefinitionManagerImpl.java:161)
at com.bea.netuix.application.manager.persistence.jdbc.MarkupDefinitionManager_twpn9c_EOImpl.createMarkupDefinition(MarkupDefinitionManager_twpn9c_EOImpl.java:138)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFile(MenuFilePersistenceManager.java:160)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.createUpdateMenuDefinitions(MenuFilePersistenceManager.java:267)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.startupSync(MenuFilePersistenceManager.java:529)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager$StartupSync.run(AbstractFilePersistenceManager.java:155)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.netuix.servlets.repository.AbstractFilePersistenceManager.startup(AbstractFilePersistenceManager.java:97)
at com.bea.netuix.servlets.repository.MenuFilePersistenceManager.onNewFiles(MenuFilePersistenceManager.java:228)
at com.bea.netuix.poller.FrameworkPoller.newFiles(FrameworkPoller.java:256)
at com.bea.netuix.poller.NetuixFilePoller.start(NetuixFilePoller.java:172)
at com.bea.netuix.servlets.manager.PortalServlet.reinitInternal(PortalServlet.java:390)
at com.bea.netuix.servlets.manager.PortalServlet.initInternal(PortalServlet.java:261)
at com.bea.netuix.servlets.manager.PortalServlet.access$100(PortalServlet.java:125)Hello Everybody,
I solved this error by myself as follows:
So, what I did was; I started the RemoteGui.bat (C:\usr\sap\J2E\JC00\SDM\program) and from the Undeployment tab, I selected mainapp01 and com.sap.engine.docs.examples.
The reason I undeployed the above applications was because when I was trying to deploy the mainapp01 application, it gave an error saying that : Cannot deploy application pcbp.com/mainapp01.. Reason: Application alias [/] for application [pcbp.com/mainapp01] already exists in the HTTP Provider Service. The application that holds this alias is [sap.com/com.sap.engine.docs.examples .
And, then I restarted the J2EE engine and from the SAP Netweaver Developer Studio, I again deployed the mainapp01 application on the local J2EE engine and it was deployed successfully.
Oct 10, 2006 9:45:30 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[002]Finished Deployment
Settings
SDM host : RPIKOER
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Result
=> successfully deployed : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp9270pcbp.com~mainapp01.ear
Thank You
With Regards,
Krunal Rana. -
Not able to run web dynpro application from portal.
Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh -
Calling a web dynpro application via portal using SSO
Hello Expert,
i have a requirement where i need to call a web dnpro application via portal.
But it is asking for user name and password.
i want to call using single sign on.
Can u please suggest a way.
i did the coding like this:-
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = l_c_appl_name
IMPORTING
out_absolute_url = l_v_gv_url_string.
l_v_icf_url = l_c_icf_url_val. "#EC SYNTCHAR
CALL METHOD cl_icf_tree=>if_icf_tree~service_from_url
EXPORTING
url = l_v_icf_url
hostnumber = l_c_0
authority_check = space
IMPORTING
icfactive = l_v_m_sso_active.
IF l_v_m_sso_active = l_c_x .
CREATE OBJECT o_viewer
EXPORTING
parent = o_empty_co.
CALL METHOD o_viewer->enable_sapsso
EXPORTING
enabled = l_c_x
EXCEPTIONS
OTHERS = 0.
l_v_gv_url_c = l_v_gv_url_string .
CONCATENATE l_v_gv_url_c l_c_url_string p0022-pernr INTO l_v_gv_url_c.
CALL METHOD o_viewer->detach_url_in_browser
EXPORTING
url = l_v_gv_url_c
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
RAISING error_occured.
ENDIF.
cl_gui_cfw=>flush( ).
ENDIF.
but it is not working
thanks
MaheshHi Mahesh,
You need to setup a Single Sign On between SAP Portal and ECC system where yoy are doing the development.
Ask basis team to setup the single sign on and usually this is the job done by Basis teams. Refer the below link to get some idea on SSO setup:
http://scn.sap.com/community/enterprise-portal/blog/2013/12/15/sso-configuration-between-sap-portal-73-and-ecc-60-ehp-6
Thanks
Krishna
Maybe you are looking for
-
How can I set up an account in two different iTunes stores (France and UK)?
I would like to be able to buy apps on the french iTunes as well as on the UK I-tunes, but havent been able to. Is there a way?
-
I have updated my iphone 4 to ios7 few days back, After that it becomes too much slow.all the applications take some time to open, its touch response also became slow. . One of my friends has also updated his iphone 4 to ios7,it is also facing the sa
-
Hi! I have tried Firefox V4 (but have since reused V3.6.16). The following problems were found: a. Cannot display the controls used for QuickTime movies. b. The refresh button doesn't function at all if the html files reside on the hard disk. I do th
-
How do i leave a copy off sent emails on the server with mac mail
How do i leave a copy off sent emails on the server with mac mail. Pop account
-
WLC - Web Traffic redirection without using Web Auth?
Hi there, I am in need of solution to integrate it to WLC where the Guest Users can use the wireless access and then be redirected to the company's website once they open a browser. This is where the guest users will no longer click any buttons (or a