Start Clusterware without Starting Services thorugh crsctl command or other

Hi,
I want to Start the Clusterware, without Starting the Services. i.e. the Database that are attached with the Clusterware for Some maintinance Purposes. Is there any way either through
crsctl start crs command or through other.
Kindly help me in this. Your Anticipation will be highly appreciated.
Thank you and Regards,
Kamran

can be done: Here ora.orcl.db is database resource
crsctl modify resource ora.orcl.db -attr AUTO_START=restore
Restores the resource to the same state that it was in when the node went down. If the state of the resource was offline (STATE=OFFLINE, TARGET=OFFLINE) when the node went down, then the resource remains offline when the node comes back up. The resource is started only if it was online before the node went down.OR
crsctl modify resource ora.orcl.db -attr AUTO_START=never
Oracle Clusterware never restarts the resource regardless of the state of the resource when the node stopped.Do it for other resource like asm....Hope this help
If it answered then mark our suggestion as correct or helpful to reward us and close the thread.

Similar Messages

  • Systemd: starting service after graphical target without

    Hi there,
    I have a service that I want to start after X has been started.
    This is my service file:
    [Unit]
    Description=Run powersaving script depending on AC state
    After=graphical.target
    [Service]
    Type=oneshot
    KillMode=none
    ExecStart=/usr/bin/powersaving
    [Install]
    WantedBy=multi-user.target
    However, during boot I get the following error message:
    ~ systemctl status powersaving
    ● powersaving.service - Run powersaving script depending on AC state
    Loaded: loaded (/usr/lib/systemd/system/powersaving.service; enabled)
    Active: inactive (dead)
    Apr 07 07:16:14 thinkpad systemd[1]: Found ordering cycle on powersaving.service/start
    Apr 07 07:16:14 thinkpad systemd[1]: Found dependency on graphical.target/start
    Apr 07 07:16:14 thinkpad systemd[1]: Found dependency on multi-user.target/start
    Apr 07 07:16:14 thinkpad systemd[1]: Found dependency on powersaving.service/start
    Apr 07 07:16:17 thinkpad systemd[1]: Found ordering cycle on powersaving.service/start
    Apr 07 07:16:17 thinkpad systemd[1]: Found dependency on graphical.target/start
    Apr 07 07:16:17 thinkpad systemd[1]: Found dependency on multi-user.target/start
    Apr 07 07:16:17 thinkpad systemd[1]: Found dependency on powersaving.service/start
    ~ dmesg | grep powersaving
    [ 7.492597] systemd[1]: Found dependency on powersaving.service/start
    [ 7.492604] systemd[1]: Breaking ordering cycle by deleting job powersaving.service/start
    [ 7.492608] systemd[1]: Job powersaving.service/start deleted to break ordering cycle starting with graphical.target/start
    I found this thread which suggests to use display-manager.service instead of the graphical target.
    However, I start X manually using startx and no display-manager.
    So how can I run my service after starting of X without a display-manager?
    Thanks!

    I don't think your new version will work. Your new version will make your service part of multi-user.target and started after multi-user.target; so you are asking systemd to start your service after itself. In any case such attempts will start the service before startx. startx is a command that you run as an ordinary user, X has the special privilege to get root access (it has the suid bit set) and systemd is not involved in the process. I do not think that you can tell systemd to start a service after a command that you launch by hand; and I don' think it's the purpose of systemd. You are really asking to launch a daemon that needs root access as part of a command that you run as an ordinary user. One of the solution is to use sudo and put sudo /usr/bin/powersaving into ~/.xinitrc after having properly configured sudo.
    Last edited by olive (2014-04-07 08:34:32)

  • To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

     

    Hi,
    Not a problem, please post the KJS error logs for me to hunt the
    exact reason for the error.
    Thanks & Regards
    Raj
    Neel John wrote:
    To run an application on iAS6sp1 on HP-Unix, while starting the kjs
    from command line, it gives a GDS error and crashes. Subsequently,
    after stopping all services and restarting iAS wouldnot come up.
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Acer Laptop stuck at "Setup is Starting Services," can't move on AT ALL!

    Hi! I've been having a serious issue with my Acer Aspire (Windows 7) laptop since around 3am last night. Before I go on, please note that I have been searching for solutions before posting this question, and none of what I've found matches my situation and/or
    solves the issue.
    SHORT VERSION:
    Issues:
    -"Windows could not complete the installation. To install windows on this computer, restart the installation" error window keeps showing up, forcing me to click OK, and restart (causing same error over and over)
    -After the above error, and another attempt to restore, this error shows "The computer restarted unexpectedly or encountered an unexpected error. Windows Installation cannot proceed. To install windows, click OK to restart the computer and then the
    installation."
    -can't access login screen after continues restarts
    -AtBroker.exe and Explorer.exe not running (and probably other important .exe as well?)
    -None of the Safe Modes are accessible
    What I've done so far:
    -begin restore process (not factory default! the process included backing up my files)
    -continuous restart and encounter "Windows could not complete the installation. To install windows on this computer, restart the installation."
    -F8 to start the "Last known good configuration," just led me back to the current issue.
    -F8 to boot in Directory Services Restore Mode, went back to trying to install in Safe Mode, forced me to restart.
    -F8 to disable automatic restart (failed and made me restart anyway)
    -F8 to "Disable Driver Signature Enforcement"... also failed
    NOTHING I've done has made any advancement past the "Setup is starting services."
    LONG VERSION
    Last night, I was installing a new theme on my laptop (from a 3rd party on deviantart, but I was carefully following instructions to not mess anything up, using theme manager. however it's probably the reason for the issue) and everything was going well.
    i had to restart occasionally to make sure the themes worked but on my final restart (after I decided I preferred a previous theme), everything went wrong! After logging in, the screen turned gray (it'd probably be black for others, but mine was gray maybe
    due to the theme) and the cursor was there just flickering. And this continued for about 10 minutes before I tried opening task manager but that failed (said the .exe wouldn't start properly) so I shut it down (through ctrl+alt+del) and restarted.
    Still same issue, but this time it said that AtBroker.exe and then explorer.exe were unable to run properly, preventing me from even seeing my desktop.
    So today when I got home, I ended up going through the Acer eRecovery Management and doing a system restore (but it would keep my files, just restore the settings to how they were when my parents bought the laptop (summer-ish 2011)). It took a while and
    it looked promising. Eventually, it took me to the screen with the Windows logo, then to a screen that said "setup is starting services"). And it gave me an error that it couldn't continue installation so it had to restart, so I clicked OK. It happened
    again. Clicked OK and repeated that 2 more times until I got fed up. I just want to skip around that installation and try to access my desktop or at least Command Prompt but it won't let me get any further without making me restart (by clicking OK). I also
    do not recall any disk when my dad set my laptop up but this was 2 years ago. I can't find one either, so I assumed Windows 7 came with it?
    I really don't know what to do! Nor am I really tech savvy when it comes to fixing this kind of computer problem, so if anyone has any solutions, I wouldn't really know a lot of terms that would be important to know when it comes to fixing this issue. Hopefully,
    someone can explain what's happening and how I can fix it fairly simply.
    Thanks!
    Olivia

    Hi Olivia,
    Thanks for your structured and logical description.
    It sounds really serious. According to my understanding, you can't start your computer normally.
    Please refer to this article:
    Windows Setup Hangs When "Setup Is Starting Windows" Screen Appears
    http://support.microsoft.com/kb/217073
    If the issue still persists, we suggest you use installation DVD to do clean install.
    Installing and reinstalling Windows 7
    http://windows.microsoft.com/en-in/windows7/installing-and-reinstalling-windows-7
    Note: please remember to backup your personal data and files
    Best regards,
    Karen Hu
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Required queries to start services when they are in offline

    two node rac
    10.2.0.4
    windows
    asm(to prepare document)
    when services went offline to start the services i got below command
    To start, stop and manage services
    srvctl status service -d dbname
    srvctl config service -d dbname
    srvctl start service -d dbname -s servicename
    srvctl stop service -d dbname -s servicename
    Check Oracle Listener on nodes
    $ srvctl config listener -n orarac1
    orarac1 LISTENER_ORARAC1
    $ lsnrctl start LISTENER_ORARAC1
    please let me know for other services
    to start other services with crsctl and also if any queries can you list out pls one by one
    thanks..............you can check the services belwo
    D:\oracle\product\10.2.0\crs_home\BIN>crs_stat
    NAME=ora.info-iww-com-06.ASM1.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.LISTENER_INFO-IWW-COM-06.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-06.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.info-iww-com-07.ASM2.asm
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.LISTENER_INFO-IWW-COM-07.lsnr
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.gsd
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.ons
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.info-iww-com-07.vip
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.OSOD.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.OSOD.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.OSOD.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.db
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osod_srv.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.osondemand1.inst
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osondemand2.inst
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07
    NAME=ora.osondemand.osservice.cs
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osservice.osondemand1.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-06
    NAME=ora.osondemand.osservice.osondemand2.srv
    TYPE=application
    TARGET=ONLINE
    STATE=ONLINE on info-iww-com-07

    aman before i had services offline
    i used some crs_start commands
    i am not familar which command for which service i am only familar with few ,which i have listed above
    to make document for safe side....................as oracle insited when services are offline please start manually
    to start manually i am preparing document
    can you please provide each srvctl command and crsctl command to make service online.
    just i need is for above services when they come offline to come online what commands to use(srvctl and crsctl)
    thanks for help

  • Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]

    I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
    Applying 10.245.33.37_cinder.pp
    10.245.33.37_keystone.pp:                         [ ERROR ]
    Applying Puppet manifests                         [ ERROR ]
    ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
    Additional information:
    * A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
    * Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
    * Did not create a cinder volume group, one already existed
    * File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
    * To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
    Please, find your login credentials stored in the keystonerc_admin in your home directory.
    Packages:
    [root@slcai461 ~]# rpm -qa|grep keystone
    python-keystoneclient-0.9.0-5.el6.noarch
    python-keystone-2014.1.3-2.el6.noarch
    openstack-keystone-2014.1.3-2.el6.noarch
    [root@slcai461 ~]# rpm -qa|grep packstack
    openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
    openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
    Log :
    [root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
    Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
    Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
    Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
    Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
    Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
    Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
    Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
    Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
       (at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
    Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
    Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
    Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
    Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Wrapped exception:
    Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
    Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
    Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
    Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
    Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
    Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
    Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
    Notice: Finished catalog run in 3.10 seconds
    Please let me know how to fix this.

    This problem connected with proxy-setings.
    As the first steps you should try:
           1.  export system env variable:
    http_proxy=http://www-proxy.ru.oracle.com:80
    https_proxy=https://www-proxy.ru.oracle.com:80
    no_proxy=127.0.0.1,localhost
    and you can also export
        export OS_TENANT_NAME=admin
        export OS_USERNAME=admin
        export OS_PASSWORD=root
        export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
    2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
    if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
    This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to  Openstack dashboard.

  • Issue while starting AdminSerever using wlst commands

    Hi, I am facing issue while trying to start the AdminServer and Managed Server via nodemanager using wlst commands. I have installelled WebLogic 11g on windows 2008 R2. Mentioned below are the steps that I followed:
    1) In Nodemanager.properties files I set following parameters to true. I did this, so that nodemanager can start the server in case of crash.
    CrashRecoveryEnabled=true
    StartScriptEnabled=true
    2) started nodemanager and then started AdminServer from the command prompt as follows:
    nmConnect('weblogic','password','10.23.226.58','5556','IMDomain','E:\Oracle\Middleware\user_projects\domains\IMDomain','ssl')
    nmStart('AdminServer')
    I dont see any errors but it seems the AdminServer do Not start properly as in the cmd window I don't see any 'started successfully' message - the message remains as *"Starting AdminServer..."*
    However in the adminServer logs I see that the status is Running (refer logs at the end) and I can also see it as Running in weblogic console.
    I really didnt care if its not giving a success message in cmd window but the problem occurs when I start the managedServer. After starting the managed server in about 10 minutes, there is a stuck thread. (I guess it is 10 mins because Stuck Thread MaxTime value is 600).
    If I set StartScriptEnabled=false, and start by directly running the startweblogic.cmd then it works fine.
    I am struggling with this for last 1 week, appreciate any help.
    LOGS.......
    Starting WLS with line:
    E:\PROGRA~1\Java\JDK16~1.0_2\bin\java -client -Xms256m -Xmx1024m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.xml.stream.XMLInputFactory=weblogic.xml.stax.XMLStreamInputFactory -Dweblogic.security.SSL.nojce=true -Xverify:none -da -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dwli.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\integration -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp360\profiles\default\sysext_manifest_classpath weblogic.Server
    <Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Mar 14, 2012 3:16:30 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Mar 14, 2012 3:16:30 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.2-b06 from Sun Microsystems Inc.>
    <Mar 14, 2012 3:16:31 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
    <Mar 14, 2012 3:16:32 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Mar 14, 2012 3:16:32 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Mar 14, 2012 3:16:32 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\IMDomain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
    <Mar 14, 2012 3:16:36 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Mar 14, 2012 3:16:37 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
    INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
    Mar 14, 2012 3:16:39 PM com.sun.faces.config.ConfigureListener contextInitialized
    INFO: Completed initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/console'
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.227.211.13:8001 for protocols iiop, t3, ldap, snmp, http.>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "IMDomain" running in Production Mode>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Mar 14, 2012 3:16:40 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\PROGRA~1\Java\JDK16~1.0_2\jre\lib\security\cacerts.>
    <Mar 14, 2012 3:20:53 PM CDT> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Thu Mar 21 14:12:27 CST 2002,
                   To: Tue Mar 22 15:12:27 CDT 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 14, 2012 3:20:53 PM CDT> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Mar 15, 2012 11:41:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "650" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    java.net.SocketInputStream.socketRead0(Native Method)
    java.net.SocketInputStream.read(SocketInputStream.java:129)
    weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
    java.io.InputStream.read(InputStream.java:85)
    com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
    com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    com.certicom.tls.record.ReadHandler.read(Unknown Source)
    com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
    sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
    sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
    java.io.InputStreamReader.read(InputStreamReader.java:167)
    java.io.BufferedReader.fill(BufferedReader.java:136)
    java.io.BufferedReader.readLine(BufferedReader.java:299)
    java.io.BufferedReader.readLine(BufferedReader.java:362)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
    weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
    weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
    weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
    weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
    weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    <Mar 15, 2012 11:42:41 AM CDT> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "710" seconds working on the request "weblogic.kernel.WorkManagerWrapper$1@68a3f7ed", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    java.net.SocketInputStream.socketRead0(Native Method)
    java.net.SocketInputStream.read(SocketInputStream.java:129)
    weblogic.utils.io.ChunkedInputStream.read(ChunkedInputStream.java:159)
    java.io.InputStream.read(InputStream.java:85)
    com.certicom.tls.record.ReadHandler.readFragment(Unknown Source)
    com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    com.certicom.tls.record.ReadHandler.read(Unknown Source)
    com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
    sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
    sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
    java.io.InputStreamReader.read(InputStreamReader.java:167)
    java.io.BufferedReader.fill(BufferedReader.java:136)
    java.io.BufferedReader.readLine(BufferedReader.java:299)
    java.io.BufferedReader.readLine(BufferedReader.java:362)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:289)
    weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:314)
    weblogic.nodemanager.client.NMServerClient.start(NMServerClient.java:102)
    weblogic.nodemanager.mbean.StartRequest.start(StartRequest.java:75)
    weblogic.nodemanager.mbean.StartRequest.execute(StartRequest.java:47)
    weblogic.kernel.WorkManagerWrapper$1.run(WorkManagerWrapper.java:63)
    weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >

    Hi chamila,
        I never tried the example. Exception is not clear. Could you please post more stack trace from log files.
    Thanks,
    Sham

  • Not able to start managed server from command prompt

    Hi,
    I am trying to start manged server from command prompt. The command i am using is as follows:
    startManagedWebLogic.cmd MS1 [http://]&lt;Listen_Address&gt;:&lt;Admin_port&gt;
    Where MS1 is the name of my managed server.
    But i am getting following exceptions:
    There are 1 nested errors:
    weblogic.management.ManagementException: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:159)
    at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.ja
    va:58)
    at weblogic.management.internal.DomainDirectoryService.start(DomainDirec
    toryService.java:73)
    at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
    ager.java:459)
    at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
    icesManager.java:164)
    at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:711)
    at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:482)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:440)
    at weblogic.Server.main(Server.java:67)
    >
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FAILED>
    <Feb 10, 2009 6:48:16 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical
    service failed. The server will shut itself down>
    <Feb 10, 2009 6:48:16 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
    te changed to FORCE_SHUTTING_DOWN>
    Please help me to resolve this issue.
    thanks,
    Sonal
    Edited by: [email protected] on Feb 10, 2009 5:16 AM

    Looking at your error message a little closer, I don't believe it has anything to do with port conflicts but rather that even though you are executing the startManagedWeblogic.cmd with your managed server name (MS1), the error indicates that it is trying to start the Admin Server (not MS1). Note in your error message the following: Unable to obtain lock on C:\bea\user_pr
    ojects\domains\PB530Domain\servers\AdminServer\tmp\AdminServer.lok. Server may a
    lready be running
    It is saying that it cannot start the Admin Server because it is already running (which is probably true in your case). Have you made any changes to the startManagedWeblogic.cmd or the startWeblogic.cmd scripts? I would start debugging there and try to figure out why the script is trying to start your admin server instead of MS1 as you requested on the cmd line.

  • VZ won't start service for 7 days on a self install

    Hoping someone can offer advice. I scheduled a self installation for a move online. I had fios st my old address, the new house is also wired for fios. VZ is telling me they can't start service at the new address until a tech visits the house.
    I don't need a tech, I moved all of the equipment with me. I'm comfortable hooking it up myself. I only need VZ to flip the switch to provision service.
    I've spoken with several customer service reps and managers and they tell me they can't do any thing for me without a technician on-site. The next available appointment is 9 days from now.
    Cell service is not fantastic inside the house and I'm not comfortable leaving my wife and infant alone without a telephone. Any advice is greatly appreciated. Thank you!
    Solved!
    Go to Solution.

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • Can't start service on one of 4 nodes

    Dear All,
    We have a RAC system with 4 nodes. One of the services is supposed to run on all the 4 nodes. However, we see it running on 2 nodes only. When trying to bring it up on one of the nodes, we got the following error:
    srvctl start service -d ABC -s ABC_S -i ABC1
    PRKP-1061 : Can not find a service member to start for service ABC_S.
    Any idea?
    Edited by: user10454776 on Jan 23, 2009 7:08 AM

    Hello,
    Are you using spfile or pfile for these 2 nodes or your RAC? Verify init.ora file on both the nodes
    and see and add service names to the existing list
    init.ora
    *.service_names= ....
    what is the output of following command?
    $> crs_stat -t
    You can add services to this nodes similar to other nodes using srvctl, make sure no white space between instances and configure it fit your needs
      srvctl add  service -d abc -s abc_s  -r abc1,abc2,abc3 -a abc4
      or
      srvctl add service -d ABC -s ABC_S -r ABC1,ABC2,ABC3 -a ABC4Regards

  • Starting OEM 11g from command window...

    Hi ,
    C:\oracle\product\11.1.0\db>set ORACLE_SID=oracle11g
    C:\oracle\product\11.1.0\db>set ORACLE_HOME=C:\oracle\product\11.1.0\db
    C:\oracle\product\11.1.0\db>emctl
    'C:\oracle\product\11.1.0\db\jdk/bin/java' is not recognized as an internal or e
    xternal command,
    operable program or batch file.
    EM Configuration issue. C:\oracle\product\11.1.0\db/_oracle11g not found.I define the java_home .... also... but without the desired result.....
    What should i do....?????
    Thanks....
    Sim

    This is not OEM 11g.
    This is Database Control, which is included in each database install as an option. You should check the documentation for starting the dbconsole application.
    Rob

  • Netboot Errors when starting Service Please Help

    Hello,
    I'm new to the forums so please let me know if you need additional information.   In Server Admin when I attempt to start Neboot Service I get the following error
    The Service has encountered an error
    Try to refresh the view (servername/netboot)
    (Cannot_start_service_err)
    When I refresh the view it looks to be on.
    I also get another error in the server log which is:
    servermgr_netboot: Failed to start tftpd
    I get that error the same time I try to start netboot any insight would be greatly appreciated.  We don't have DHCP or DNS running on this server and I don't believe that would cause these errors.  I actually setup a test server on a laptop without those services running and was able to successfully netboot, I believe some configuration files got corrupt.
    Thanks for your help in advance

    It sounds like your tftp.plist is missing.
    cat /System/Library/LaunchDaemons/tftp.plist
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>Disabled</key>
              <true/>
              <key>Label</key>
              <string>com.apple.tftpd</string>
              <key>ProgramArguments</key>
              <array>
                        <string>/usr/libexec/tftpd</string>
                        <string>-i</string>
                        <string>/private/tftpboot</string>
              </array>
              <key>inetdCompatibility</key>
              <dict>
                        <key>Wait</key>
                        <true/>
              </dict>
              <key>InitGroups</key>
              <true/>
              <key>Sockets</key>
              <dict>
                        <key>Listeners</key>
                        <dict>
                                  <key>SockServiceName</key>
                                  <string>tftp</string>
                                  <key>SockType</key>
                                  <string>dgram</string>
                        </dict>
              </dict>
    </dict>
    </plist>

  • User Profiles Synch Service starting failes after "ILM Configuration: Starting services"

    Hello guys.
    I tried to configure user profiles synchronization and it could not be started without any problems as expected :)
    This time I got the following error in logs:
    02.05.2013 10:54:03.34 OWSTIMER.EXE (0x17DC)
    0x183C SharePoint Portal Server
    User Profiles 9q1k
    Medium ILM Configuration: Starting services.
    0160471f-15fc-4d97-8227-05b86f4d0fc7
    02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
    0x183C SharePoint Portal Server
    User Profiles 9q15
    High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size
    of the argument list.     at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)     at System.String.Format(IFormatProvider provider, String format, Object[] args)     at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController
    controller)     at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted()     at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance
    profileSyncInstance). 0160471f-15fc-4d97-8227-05b86f4d0fc7
    02.05.2013 10:54:33.52 OWSTIMER.EXE (0x17DC)
    0x183C SharePoint Portal Server
    User Profiles 9i1u
    Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UserProfilesService'.
    0160471f-15fc-4d97-8227-05b86f4d0fc7
    So, what I have and what I've done:.
    1) I have a test 2-servers farm installation (Database server + WFE/Application server); SQL Server 2008 R2 SP2, SHP 2010 SP1 + October 2012 CU; There are no any service applications except default ones(Security Token Service and Application Discovery
    and Load Balancer Service Application) as well as there are  no any services started except default :) 
    2) I created a site collection and manage path for MySites, created a new UPA and its proxy.
    That's all. Now, if I try starting User Profiles Synchronization Service, it stucks on "starting" for about 10 mins and I see the error above in ULS. Hope you can somehow help me.
    By the way, I don't want a both sides synchronization this time, I just need to check some stuff with People Search. Will "Read" rights for Managed Account in AD be enough to export profiles from AD? (I mean if I select my farm account as a synchronization
    account, will it work?)
    Thank's in advance!
    Anton.
    UPDATED
    The problem probably was due to the lack of internet access. As Raymond
    Diack said:
    "the farm account needs internet access to do a CRL check to these sites:
    crl.microsoft.com
    ctldl.windowsupdate.com
    ctldl.windowsupdate.nsatc.net
    www.update.microsoft.com.nsatc.net "

    Sure, here is the stack near the error without any filters: 
    11:13:11.88 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1j Medium ILM Configuration: Opening firewall ports. 589d9196-6647-4432-9ab0-a389871310b7
    11:13:12.13 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q1k Medium ILM Configuration: Starting services. 589d9196-6647-4432-9ab0-a389871310b7
    11:13:12.36 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a'
    11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:80a1f95b-37a3-45f1-89a6-f33de57b678a' 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
    11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
    11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
    11:13:12.36 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
    11:13:12.38 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=4,01622273221876 75b52d1d-0e9e-45a6-8122-c578bc8aeaf7
    11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job job-timer-locks) ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
    11:13:12.75 OWSTIMER.EXE (0x0AA8) 0x16F0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job job-timer-locks). Время выполнения=4,16512433842849 ea70e10e-4455-47ea-a3fd-e7cb0f0a9ce4
    11:13:22.52 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78'
    11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:5b799d56-3784-48ff-beaf-6fb6bfeade78' 941bbfb5-84aa-411e-b310-74830120b860
    11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 941bbfb5-84aa-411e-b310-74830120b860
    11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 941bbfb5-84aa-411e-b310-74830120b860
    11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 941bbfb5-84aa-411e-b310-74830120b860
    11:13:22.52 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,92432418086656 941bbfb5-84aa-411e-b310-74830120b860
    11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingUnpublish) 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
    11:13:26.78 OWSTIMER.EXE (0x0AA8) 0x0894 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingUnpublish). Время выполнения=2,56094000773841 6044b3fe-8ca7-4f76-81b0-ea55e6795d5b
    11:13:32.66 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f'
    11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:f5648c05-71d7-443c-b12d-946eb36bcb3f' 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
    11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
    11:13:32.66 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
    11:13:32.71 w3wp.exe (0x0788) 0x1544 SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
    11:13:32.72 w3wp.exe (0x0788) 0x1544 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=65,7127512016192 1af7e327-bb71-49f8-a598-2e85ae5ce2a6
    11:13:39.79 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Timer Job SchedulingApproval) 69e34469-a502-4257-80f4-d8fb990f2bf7
    11:13:39.80 OWSTIMER.EXE (0x0AA8) 0x0500 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Timer Job SchedulingApproval). Время выполнения=11,6191443325898 69e34469-a502-4257-80f4-d8fb990f2bf7
    11:13:40.33 w3wp.exe (0x1364) 0x0E98 SharePoint Portal Server Runtime 8gp7 Medium Topology cache updated. (AppDomain: /LM/W3SVC/961767364/ROOT-1-130050376913614507)
    11:13:42.88 w3wp.exe (0x1364) 0x0CA0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hq-tcc-app-02:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1'
    11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://hq-tcc-app-02.corp.fsk-ees.local:32843/900539dde24c4bc9a0db06a9f9fe6ebf/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:23bdd02e-0716-4697-b55d-55862694ebe1' c7b0b8bc-dad4-4863-98e0-92838dafa933
    11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) c7b0b8bc-dad4-4863-98e0-92838dafa933
    11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' starting. c7b0b8bc-dad4-4863-98e0-92838dafa933
    11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Server Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Служба управляемых метаданных' completed. c7b0b8bc-dad4-4863-98e0-92838dafa933
    11:13:42.89 w3wp.exe (0x0788) 0x0D2C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Время выполнения=2,88158131829604 c7b0b8bc-dad4-4863-98e0-92838dafa933
    11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9q15 High UserProfileApplication.SynchronizeMIIS: Failed to configure ILM, will attempt during next rerun. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.     at System.Text.StringBuilder.AppendFormat(IFormatProvider provider, String format, Object[] args)     at System.String.Format(IFormatProvider provider, String format, Object[] args)     at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.IsStarted(ServiceController controller)     at Microsoft.Office.Server.Administration.ProfileSynchronizationServiceInstance.WaitUntilStarted()     at Microsoft.Office.Server.Administration.UserProfileApplication.SetupSynchronizationService(ProfileSynchronizationServiceInstance profileSyncInstance). 589d9196-6647-4432-9ab0-a389871310b7
    11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Portal Server User Profiles 9i1u Medium UserProfileApplication.SynchronizeMIIS: End setup for 'UPS'. 589d9196-6647-4432-9ab0-a389871310b7
    11:13:42.89 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8xqz Medium Updating SPPersistedObject ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. Version: 15232 Ensure: False, HashCode: 11248478, Id: c8e4ed56-ab72-4b99-8532-d282d3f26896, Stack:    at Microsoft.SharePoint.Administration.SPPersistedObject.BaseUpdate()     at Microsoft.SharePoint.Administration.SPJobDefinition.Update()     at Microsoft.Office.Server.Administration.ProfileSynchronizationSetupJob.Execute(SPJobState state)     at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)     at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result) 589d9196-6647-4432-9ab0-a389871310b7
    11:13:42.92 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (Timer Job ProfileSynchronizationSetupJob). Время выполнения=161321,353202712 589d9196-6647-4432-9ab0-a389871310b7
    11:13:42.96 OWSTIMER.EXE (0x0AA8) 0x0EA8 SharePoint Foundation Topology 8dyx High Deleting the SPPersistedObject, ProfileSynchronizationSetupJob Name=ProfileSynchronizationSetupJob. 589d9196-6647-4432-9ab0-a389871310b7

  • Unable to start service

    i'm trying to execute the simpleconnection.java, and the messag error is diplayed:
    Exception = oracle.ifs.common.IfsException: IFS-20102: Unable to start service (IfsDefault)
    oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (IfsDefault)
    java.util.MissingResourceException: Can't find resource for base name oracle.ifs.server.properties.IfsDefault, locale fr_FR.
    the listing of the program is:
    package oracle.ifs.examples.documentation.connection;
    import oracle.ifs.beans.LibraryService;
    import oracle.ifs.beans.LibrarySession;
    import oracle.ifs.common.CleartextCredential;
    import oracle.ifs.common.IfsException;
    public class SimpleConnection
    * Connect to the Oracle 9iFS server. The arguments (args) are
    * IfsService, IfsServicePassword, UserName, UserPassword.
    public void static main (String[] args)
    // Use the IfsService and IfsServicePassword to start the service.
    LibraryService service =
    LibraryService.startService(args[0], args[1]);
    * Use the UserName and UserPassword to instantiate a
    * CleartextCredential object.
    CleartextCredential cred =
    new CleartextCredential(args[2], args[3]);
    LibrarySession ifsSession = service.connect(cred, null);
    // This is the place where you insert the part of the
    // program that actually does something.
    //Disconnect the session.
    session.disconnect();
    and the command of execution is:
    c:\>SimpleConnection IfsDefault ifssys system manager
    what is a service name ? and how can i do to resolve this problem ?
    if there is any suggetions, please let me know.

    From your command prompt, make sure to run 9ifs/bin/ifsenv.bat.
    Backup the 9ifs/cl/ifsclasspath.cl file.
    In the backup files, replace "$" with "set " in the file 9ifs/cl/ifsclasspath.cl and copy and paste the output into your command prompt.
    Between the ifsenv.bat and the cl file, most of your environment variables (including IFS_CLASSPATH) will be set.
    Then type the following line:
    set CLASSPATH=%IFS_CLASSPATH%;%CLASSPATH%
    This will set your classpath correctly and you should not get that error.

  • Unable to start service "URGENT"

    i'm trying to execute the simpleconnection.java, and the messag error is diplayed:
    Exception = oracle.ifs.common.IfsException: IFS-20102: Unable to start service (IfsDefault)
    oracle.ifs.common.IfsException: IFS-20010: Unable to get service configuration properties (IfsDefault)
    java.util.MissingResourceException: Can't find resource for base name oracle.ifs.server.properties.IfsDefault, locale fr_FR.
    the listing of the program is:
    package oracle.ifs.examples.documentation.connection;
    import oracle.ifs.beans.LibraryService;
    import oracle.ifs.beans.LibrarySession;
    import oracle.ifs.common.CleartextCredential;
    import oracle.ifs.common.IfsException;
    public class SimpleConnection
    * Connect to the Oracle 9iFS server. The arguments (args) are
    * IfsService, IfsServicePassword, UserName, UserPassword.
    public void static main (String[] args)
    // Use the IfsService and IfsServicePassword to start the service.
    LibraryService service =
    LibraryService.startService(args[0], args[1]);
    * Use the UserName and UserPassword to instantiate a
    * CleartextCredential object.
    CleartextCredential cred =
    new CleartextCredential(args[2], args[3]);
    LibrarySession ifsSession = service.connect(cred, null);
    // This is the place where you insert the part of the
    // program that actually does something.
    //Disconnect the session.
    session.disconnect();
    and the command of execution is:
    c:\>SimpleConnection IfsDefault ifssys system manager
    what is a service name ? and how can i do to resolve this problem ?
    if there is any suggetions, please let me know.
    thanks in advance

    The Service is the LibraryService that you're going to use to connect to Oracle 9iFS. Please read the Session and Transaction Management
    chapter in the Oracle 9iFS Developer's Reference for more information on services and sessions.
    The name of the Service corresponds to a properties file that stores configuration for the LibraryService. You should find an IfsDefault.properties
    file in $ORACLE_HOME/9ifs/settings/oracle/ifs/server/properties directory.
    To trouble shoot this:
    1) first verify that your connection arguments are valid by using them to launch ifssvrmgr. This utility is no longer used to
    manage servers in Oracle 9iFS, but you can still use it to validate your arguments. If they are valid....
    2) Check the IFS.SERVER.JDBC.DatabaseUrl parameter and make sure it references a
    valid SQL*Net address. Double check the SQL*Net connection by using it to connect to the ifssys schema via SQL*Plus.
    3) Find out where the SimpleConnection program is failing by inserting print line commands.
    You may also find the following technical brief useful. It shows how to connect from JDeveloper.
    http://otn.oracle.com/products/ifs/htdocs/JDeveloperSetup.html

Maybe you are looking for