Start MaXDB hit error due to insufficent memory

Hi,
When trying to start MaxDB instance, I hit this error:
   "Check knldiag! Kernel died before reaching ADMIN state..."
From the MaxDB diagnosis doc below, I know it is due to insufficient resource issue.
    http://maxdb.sap.com/training/internals_7.6/diagnose_EN_76.pdf
Once I set the user's limits in the unix os to unlimited, I can solve the problem. The MaxDB instance can startup.
However, my question here is: Are there any officially recommended ulimit values I shall set from SAP? Is there any doc for this?
For example, in the NW04s SR3 installation guide, there is one section that has mentioned the proper values for ulimit.
As I am not the owner of the Unix Server, if I set everything to unlimited, I will be questioned unless there is a SAP doc to support...So far I have not found any document from SAP yet.
Please help.
Lars, any advice?   =)
Regards,
Li Bin
Edited by: Li Bin on Jan 7, 2009 4:21 AM
Edited by: Li Bin on Jan 7, 2009 4:28 AM

jguptill wrote:>
> How in the world do i view this note? We use MaxDB at our company, but do not use SAP. I found a link to the note, but there is a prompt for a username and password. My SAP community credentials do not allow me in there.
That's correct.
SAP support notes are available to SAP customers, partners and employees only.
> I have this exact problem where i don't know how to tune the number of user tasks based on the ram of my machine (or other factors.)
For the ULIMIT issue: just set every ulimit to unlimited for the os-user that runs the MaxDB kernel on your machine.
Concerning the other questions, please check the documentation and the MaxDB WIKI pages here in SDN.
And, btw, you don't setup the number of user tasks based on the available ram.
Why would you?
The number of user tasks simple depends on how many connected sessions should be allowed at any given time.
Say, you know your application usually needs 20 connections as maximum.
Then you should set MAXUSERTASKS to at least 20 and maybe add some possible spare connections to it.
So you may set it to 30 and you should be fine.
regards,
Lars

Similar Messages

BODI - Job Error " blank message,possibly due to insufficient memory

Ending up with below error while executing a DI job. The job uses a file of size 37 MB as source. As the error looks something related to memory. I have tried splitting up the input file into and executed the job. The job completed successfully without any error.
Could someone help me out to find any memory setting which needs to be investigated in the dataflow level to get a permanent solution for it.
Expecting for help !!!
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050406: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF|Dataflow SM_DM_ACCESS_LOG_DTL_F_DF
Data flow <SM_DM_ACCESS_LOG_DTL_F_DF> received a bad system message. Message text from the child process is <blank message, possibly due to insufficient memory>. The process executing data flow <SM_DM_ACCESS_LOG_DTL_F_DF> has died abnormally. For NT,
please check errorlog.txt. For HPUX, please check stack_trace.txt. Please notify Customer Support.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.
(11.7) 03-04-11 08:18:06 (E) (21097:0001) RUN-050409: |Session SM_DM_ACCESS_LOG_DTL_F_JOB|Workflow SM_DM_ACCESS_LOG_DTL_F_WF
The job process could not communicate with the data flow <SM_DM_ACCESS_LOG_DTL_F_DF> process. For details, see previously
logged error <50406>.

Hi,
loading a 37MB file shouldnt be a problem without splitting it. i´ve loaded GB size flatfiles without problems.
Did you checked the error.txt as stated in the message? Whats in there.
If you split the file and you can load it, you have enough space in your DB.
Please check the memory utilization of your server during executing the job with one file. Maybe the Server is too busy...what would be strange with a 37MB file.
Regards
-Seb.

HT201372 Failed to start erase of disk due to error (-9999, 0). A error occurred erasing the disk.

Tried the recommendations in this article, however ran into the error posted below.
Creating a bootable OS X installer in OS X Mavericks
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath "/Applications/Install OS X Mavericks.app"
Ready to start.
To continue we need to erase the disk at /Volumes/Untitled.
If you wish to continue type (Y) then press return: Y
Failed to start erase of disk due to error (-9999, 0).
A error occurred erasing the disk.
Is there an updated document ?
MacBook 13" white - Early 2009 model

Oh, createinstallmedia only runs on OS 10.9! Oh! The 9999 is if you try to run it on an earlier OS! Oh! Linc means to update the current drive to Mavericks, and then one will be able to run createinstallmedia, if one has first saved away a copy of the installer.
But if, like me, you are trying to create an installer to do a clean install on an empty drive, without replacing the earlier OS on your current drive, then...
You must use the slightly more complicated instructions you can find all over the place that look like
Right click "Install OS X Mavericks.app" and show package contents
Find a certain .dmg file and double click
Find a hidden .dmg within the drive that mounts from the first .dmg
Double-click or use "mount" on the hidden .dmg within the .dmg
Use Disk Utility to "restore" the second disk image onto the erased USB drive
Then replace an alias folder with a copy of a huge folder within the first disk image
I had success with the "Option 2: Use Disk Utility" section here.

Printing error due to out of memory condition...

hi i got this problem of "printing error due to out of memory condition" and i cannot save it as a pdf file too. How to solve this prob? i using cs3 and acro 9.. pls help me... got a proj due and cannot afford to waste too much time...

I've also seen this error message for the first time today "printing error due to out of memory condition" - I have 2GB of RAM, 300Gb+ free on my hard drive and have closed all other programs that were using some memory, however have had no problems printing to pdf ever before in Indesign... is there a solution to this problem?

Error due to out of memory condition

Hi,
system: Windows XP, 2 GM RAM, Indesign CS3
I placed two files in Indesign: the first is .ai (1.1 MB, probably exported form a CAD program), the second is .psd (53 MB). When I try to print to .ps file, Indesign displays the message: "Export error: error due to out of memory condition". If I: 1. export to PDF, everything is OK, 2. rasterize .ai in Photoshop, then import the resulting .psd to Indesign, print to .ps file is OK.
Does somebody has an answer to my problem?

My gues is "mistakes" was referred to simply not outputting as intended by the designer. I had output issues when going directly to PDF and had to also continue the old way of doing thinkgs by outputting to .ps then distill to PDF. The "mistakes" that occured for me were nearly unnoticed. The publication was a 128+4 product catalog that had a header at the top of each page. I never had any problems outputting in the past. At the time, I just had updated to CS3 (XP Pro SP3 Dual Core 4 gigs ram). I was advised that outputting directly to PDF had been durastically improved. I output my files without "mistakes" or errors, or so I thought. After proofing, I didn't realize that all of the drop shadows for the header headline were not applied. The problem though, wasn't that they were applied to all headers, just beginning at page 60 or so, halfway through. After getting the finished publication back, I didn't notice it for a few months. After noticing it, I investigated. Several troubleshooting hours later (after forum posts and other expert help), I/we concluded that it was simply a program deficiency. During my trouble shooting, I looked at several areas mainly focusing on the transparency settings. I output the document several times. I finally exported each page separately and found that that was the only way that I could output every page to include the dropshadow in each header page (past page 60 or so).
I have been past that issue for a while now. Now I am on Win 7, Quad core, 6 gigs of ram, and don't have the outputting problem that I used to. Now I occasionally get this "Error due to out of memory condition" which is BS because my hardware specs are beyond reasonable for what I typically create in my workflow. Most of the time, my memory is only at about half of its capacity when I get this error. Not when I have a PS open with a large multipage file that I am working on. My out of memory error happens during file output or just when performing ordinary layout functions in InDesign.
When on my personal computer (Aluminum iMac 2.4 Core2 duo, 4 gigs of ram, 512 video, CS4 & CS5) I have neither of the above issues.

There is a sign screen error, probably due to insufficient memory.

When I open a pdf (MacOSX 10.8.5) I get this message 'There is a sign screen error, probably due to insufficient memory.' (translation out of Dutch).
Via Photoshop I can open the file, that's the strange thing about it.
Someone an idea what the problem is and ofcourse what the solution is.

The Acrobat forum is here:
http://forums.adobe.com/community/acrobat
and the Reader one, here:
http://forums.adobe.com/community/adobe_reader_forums
This one is only for discussions on the forums themselves.

How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
Thanks!

Probably you are running out of disk space. Can you interact with your Mac at all, or is the error message preventing you from using Finder windows?
I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
How much free disk space do you have right now?
See:
http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
Regards
Léonie

SAP installtion stopped - error cant create shared memory

Dear All,
Greetings!
We are trying to install SAP ECC 6.0 IDES system on Windows 2003 x64 Server and DB2 9.1, during the process of installation - in the step of Start Instance. The sapinst Gives Up! the process since the enqueue server is found in stopped state when the instance tries to start up.
I found the below given error message from the Developer Trace files of the enqueue server.
[Thr 1384] Sat May 09 18:21:13 2009
[Thr 1384] *** ERROR => ShmDelete: Invalid shared memory Key=34. [shmnt.c      719]
[Thr 1384] *** ERROR => ShmCleanup: ShmDelete failed for Key:34. [shmnt.c      793]
[Thr 1384] initialize_global: enqueue server without replication
[Thr 1384] Enqueue: EnqMemStartupAction Utc=1241873473
[Thr 1384] *** ERROR => [CreateOsShm] CreateFileMapping(37,65 KB) failed with Err=5
              ERROR_ACCESS_DENIED: Access is denied. [shmnt.c      2174]
[Thr 1384] *** ERROR => ShmCreate: Create (37,67072,1) failed [shmnt.c      506]
To note - we had a virus attack on the server recently and an Anti-Virus tool was used to clean the server, after that I found most of the SAP folders in Read-Only mode.
I suspect any causes of the same for the above mentioned ACCESS_DENIED error. Currently I have allocated 28GB of swap size, but the SAP instance is not able to create a shared memory from the same I hope.
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
8192000 K
8192000 K
8192000 K
8192000 K
2
e:\pagefile.sys
10485760 K
10485760 K
10485760 K
10485760 K
3
f:\pagefile.sys
10485760 K
10485760 K
10485760 K
10485760 K
Please help me with your suggestions for the workaround,
- How will I be able to enable the swap size of the server to be used by the SAP instance?
- Is this the effect of the anti-virus or an aspect in windows server to change the folders and files to read-only after a virus attack?
I have tried the possibilities of adding more shared memory, removing the shared memory and restarting the OS and assigning back the same, but these dint prove useful.
Kindly help me with your suggestions.
Thank you
Regards,
Vineeth

Hi,
I would suggest you to go to run > services.msc
now try to manually stop / start the SAP<SID>_<nr> services. are you able to start it properly? If you get error here, that means SAP services not able to start as it has permission problem.
login with <sid>adm & reregister the service by running sapstartsrv.exe in <drive>:\usr\sap\SID\sys\exe. after you give the parameters and press ok, wait for sometime for the 'success' message.
once its done, then start sap in MMC.
another thread talks about similar kind of problem.
Shared Memory Ceation error when we install NW04S Java Stack.
Regards,
Debasis.

Whether instance gets down due to insufficient memory ?

hi,
11g R2 (Linux)
Other day one of the 3 nodes got evicted due to insufficient memory
Err message is
ORA-04031: unable to allocate 4136 bytes of shared memory ("shared pool","unknown object","sga heap(3,0)","gcs dynamic r")"
"LMS0 (ospid: 8489): terminating the instance due to error 4031"
Thanks

Hi, Have you configured memory_target or memory_max_target? If so then it may supersede depending on values set. Please post all memory parameters set and based on that we can answer. Also let us know the OS since in Linux there is a concept of tempfs which also limits the maximum memory to be allocated. While in solaris there is concept of project, which limits max memory per oracle instance depending on OS user.
Regards
Tushar

AE CC Error: "unable to allocate memory"

Continually get this error: "unable to allocate memory. Decrease the memory requirements for the rendering of this frame, or install more ram."
I have been working on the same AE project-- 30mb project mostly full of animated shape layers. While working in this project this last week I keep getting the same error on both my macbook pro (8gb ram) and my imac desktop (16 gb ram) which makes me believe the issue is not my computer(s).
I initially got the error using AE CC version 13.0.2. After reading different forums someone suggested downloading the updated 13.1 version which fixed some bugs. I did that on my macbook pro and within minutes of working still got the same error.
Then I down-saved the AE project to CS6, started working on it again in CS6 and quickly received the same error.
I've also cleaned out my cache folders, but still nothing.
I have spent hours investigating this issue and am at a complete loss on what to do. Super frustrating when working on a tight deadline!!
Can anyone help?!!

The project contains a lot of stuff:
-Shape layers with repeaters to create animated sprites and animated backgrounds
-created wiggly text using precomped textures with fractal noise, displacement maps and posterize time effects applied. Here is the tutorial I recreated: Jittery Type After Effects Tutorial - YouTube
-imported mini AE projects of different animated objects that I used in past projects: book with pages flipping, dollar bills flipping in stack, coins stacking up, box unfolding.
-More effects used- fill, drop shadow, bunch of track mattes, turbulent displacement, hue/saturation, exposure, cc bender- on flipping pages in book,
-Lots of precomps mostly 1920 x 1080 some bigger like 1920 x 3000
Would it be possible or helpful if I just sent my project and files for you to inspect?
iMac (2011)
Processor- 3.4 GHZ Intel Core i7
Memory- 16 GB
Graphics- AMD Radeon HD 6970M 2048 MB
Software- OS X 10.9.5
MacBook Pro 17" (2012)
Processor- (don't have laptop with me so unsure)
Memory- 8 GB
Software- OS X 10.9.2

CIF errors due to material status

Hi All,
We are having lot of CIF errors due to material status "40" in CIF, which restrict creation of P.reqs and PO at source location.
Eg:- LOC1 is a manufacturing location and LOC2 is a Distribution centre. A new Product A introduced at both location, having status status "40" at both the location.
When APO creates P.Reqs with source as LOC1 and Destination as LOC2 for this product, these p.reqs get stuck in CIF queue, as plant specific status "40" doesn't allow creation of P.Reqs at LOC1 in ECC.
We thought of creating a new status "Z1", which would allow the creation of P.Reqs and PO. But the requirement was to allow only creation of P.Reqs and not PO. But in the config setting in ECC for material status there is common setting for P.Reqs and PO and cannot be differentiated.
Have anybody come across such problem and whats the way to address this issue.
Thanks & Regards
Shankar

Hi Shankar,
Please check list of enahncements in SMOD transaction. The enhacements related to Purchase documents start with "CIFPUR.."
Or other path in SPRO is as below:
In the ERP system under Integration with Other SAP Components >> Advanced Planning and Optimization >> Application-Specific Settings and Enhancements >>Settings and Enhancements for External Procurement.
Because of the blocked status of the material ,while transferring the PR/PO data, the CIF prrogram -function call for creating the purchasing document does not get triggered. As written in earlier mail, the enhancement on SAP ECC inbound may not help, because, the material status is picked up from ECC ( or SAP R/3) material master data and not taken from APO.
Neverthless, you may please have a look at these enhancements.
I hope this gives insight to you.
Regards
Datta

Could not Start MaxDB: MDM Service on Local Computer

Hi,
I install the MaxDB to use the MDM software on to my PC. Its sucesfully completed. I uploaded the some of the repository and worked fine some 4 days.
Now my Database instance(MDM) is not at all started and If i check the status of this service in Control Panel->Administrative Tools, Showing as "Starting". It is never end and getting the error as
"Could not Start MaxDB: MDM Service on Local Computer" .
**Here MDM is the Database Instance name in my system.
Please Suggeme How to come out of this problem. Even i not able to uninstall the MaxDB.
Many Thanks in Advance,
Please help me.
Warm Regards,
Vijay

Hi Natalia,
First, I want to Say Many Thanks for the reply.
I am using the MaxDB 7.6.02.01 Version. Actually i don't know anything about MaxDB. I am MDM Consultant, I just want to use it as MDM Database.
Why I want to uninstall is: I don't know how to solve this problem that why i will just want to uninstall everything and re-install it again to make use of it proper with MDM.
I really don't know where to execute the commands which you specified in previous post.
I didn't find the files knldiag.err & knldiag files and
Only the following information i find and Here are the details.
Waiting for you replay... Thanks
DBM.PRT Information (Part of the file - So much data is exist in that file)
2009-01-13 19:19:56 0x00000810 INF        226 DBMSrv   DBM Server client disconnect: PID 2024 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 09:38:10): PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF        283 DBMSrv   command db_online
2009-01-14 09:38:14 0x00000a98 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000a98 INF          8 DBMKnl   Statement: RESTART
2009-01-14 09:38:29 0x00000a98 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000a98 INF          9 DBMKnl   Statement: RESTART
                    0x00000a98 INF         10 DBMKnl   Returncode: 0
2009-01-14 09:38:30 0x00000a98 INF        226 DBMSrv   DBM Server client disconnect: PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 12:01:51): PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:01:56 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:01:57 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:02:04 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:05 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:10 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:10 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:11 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:03:14 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:15 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:03:15 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:10:59 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:10:59 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:00 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:12 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:12 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:13 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:16 0x000014d0 INF        283 DBMSrv   command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:16 0x000014d0 INF        283 DBMSrv   command auto_extend show
2009-01-14 12:11:17 0x000014d0 INF        283 DBMSrv   command auto_update_statistics show
2009-01-14 12:11:20 0x000014d0 INF        226 DBMSrv   DBM Server client disconnect: PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF        216 DBMSrv   DBM Server client connection (established at 2009-01-14 18:52:58): PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF        283 DBMSrv   command db_online
2009-01-14 18:53:13 0x0000091c INF          1 DBMKnl   Sending an administrative statement to the database
                    0x0000091c INF          8 DBMKnl   Statement: RESTART
2009-01-14 18:53:29 0x0000091c INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x0000091c INF          9 DBMKnl   Statement: RESTART
                    0x0000091c INF         10 DBMKnl   Returncode: 0
2009-01-14 18:53:39 0x0000091c INF        226 DBMSrv   DBM Server client disconnect: PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-15 09:52:00): PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF        283 DBMSrv   command db_online
2009-01-15 09:52:04 0x00000a90 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000a90 INF          8 DBMKnl   Statement: RESTART
2009-01-15 09:52:12 0x00000a90 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000a90 INF          9 DBMKnl   Statement: RESTART
                    0x00000a90 INF         10 DBMKnl   Returncode: 0
2009-01-15 09:52:12 0x00000a90 INF        226 DBMSrv   DBM Server client disconnect: PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-15 20:18:20): PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF        283 DBMSrv   command db_online
2009-01-15 20:18:24 0x00000b00 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000b00 INF          8 DBMKnl   Statement: RESTART
2009-01-15 20:18:33 0x00000b00 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000b00 INF          9 DBMKnl   Statement: RESTART
                    0x00000b00 INF         10 DBMKnl   Returncode: 0
2009-01-15 20:18:33 0x00000b00 INF        226 DBMSrv   DBM Server client disconnect: PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:57 0x00000ab8 INF        216 DBMSrv   DBM Server client connection (established at 2009-01-16 09:38:56): PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:58 0x00000ab8 INF        283 DBMSrv   command db_online
2009-01-16 09:39:01 0x00000ab8 INF          1 DBMKnl   Sending an administrative statement to the database
                    0x00000ab8 INF          8 DBMKnl   Statement: RESTART
2009-01-16 09:39:07 0x00000ab8 INF          3 DBMKnl   Received the result of an administrative statement from the database
                    0x00000ab8 INF          9 DBMKnl   Statement: RESTART
                    0x00000ab8 INF         10 DBMKnl   Returncode: 0
2009-01-16 09:39:07 0x00000ab8 INF        226 DBMSrv   DBM Server client disconnect: PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
Thanks in Advance,
Warm Regards,
Vijay

Help with error:"ora-27101 shared memory realm does not exist"

Hello friends of the forum:
I would like to help me with a question imortante I am very new to this aspect of oracle:
And install Oracle 11g on win "view" and followed the steps in the installation of l at the start page www.oracle.com funcionava all fine, but after a month of any change:
The database does not start qe and get an error "ora-27101 shared memory realm does not exist".
At first and solved momentarily reboot oracle service ...... but after a while does not work but I can not conextar to leave the base because this errror ......
The database is a lapto instalao .... and I have 100gb of free space and 4 gb of memory do not understand why this happens .....
I have to do so you can have acces oracle based ...
I can help with this problem .... thanks ....
I like to see that show me with pictures as I am new in this aspect of oracle .... and want to learn it .... thank you very much

Hello friend..
The error you are getting *"ORA-27101: shared memory realm does not exist"* may be coz you are trying to connect to your database which is already shutdown not as sysdba user but as some other user, becoz of which you are getting this error. It sometimes happen that the service of the database is already started but when you try to connect to a shutdown database as users other then sys even having the DBA priviledges you cannot connect to database.
Try to connect as SYS user hope your problem will be resolved.
Deepak Sharma

Net start OracleXETNSListener System error 5 has occurred.

When I installed Oracle 10g EX, I got this error message.
Net start OracleXETNSListener System error 5 has occurred.
Access is denied
net start OracleServiceXE System error 5 has occurred.
Access is denied
How to solve this problem? Thanks.

It might also be something to do with administrative rights on your 'server'.
Could also possibly be due to a change in your user profile if you've recently changed your user domain or are not using the same log on as when you installed XE.
SOme applications give one the option during installation to make the application available for 'this user only' or 'all users'. Can't remember if Oracle XE does this.
I had XE running quite nicely on my work lapotp until the end of last week when our IT administrator changed my laptop to the company domain. Now I get the same error but haven't had time to investigate fully yet.
The same error (system 5) occurs if I try to stop XE running.

Aironet client utility load new firmware 59% Error Writting to Flash Memory

always receive this error
Error Writting to Flash Memory in 59%
Thursday August 07 2008 17:34:30
Start test
`The radio's registry keys are OK.
C:\WINDOWS\system32\drivers\PCX504.SYS File Size: 124416
The radio driver has been installed.
TEST 2:
The second step is to check the radio insertion.
The radio has been inserted.
TEST 3:
The third step is to check if the radio is turned on.
Your radio is turned on.
Current Active Profile Name: Unknown Vendor
Auto Profile Selection is not enabled.
TEST 4:
The fourth step is to check your client adapter's association to an access point.
---------->Association Status: No receive packets
Checking driver/firmware capabilities
PROBLEM: Firmware version is too old.
POSSIBLE REPAIR: Download new firmware to the radio
or replace the radio.
any help :(

please any help?

Start MaXDB hit error due to insufficent memory

Similar Messages

Maybe you are looking for