Start Process and inherited handles on Windows

My application starts a launch-and-forget process using ProcessBuilder.start. That process keeps a handle to a file of mine that was opened (and I guess not closed) by a dll I called but didn't write. That's messing me up when I try to replace or re-write that file. (The sub-process has no interest in that file.)
The Windows CreateProcess function has a "inherit handles" boolean. Is there someway I can get Java to set that boolean to false?

Also to be sure you need at least Windows XP Service Pack 2 if not 3 (XP3) as Firefox since version 13.0 will not work on XP1 or older.
https://www.mozilla.org/firefox/33.1.1/system-requirements/

Similar Messages

Collect BPM - Start process and correlation in one Receiver

I'm using collect pattern based on timeout. Somehow in my infinite loop, in the receive step, I cannot combine "start process" with creating correlation and using it. All in the same receiver. When I try to activate my BPM, in the processing log I get, "start process" trigger removed.
Can someone throw any light on this....I've being trying this for over few hours now. I cannot get start process and correlation in one receiver. I must be doing something wrong.
Even the copied BPMCollectPattern removes the start process from the receiver.
thank you,
Pam
Additional info:
The first message received starts the process within an infinite loop and activates the correlation "Correlation" by using IDoc message tyoe. Each subsequent message uses this correlation. The messages are received in the container element CollectMessage.In the loop the received messages are attached to the multiline container element CollectMessageList.

Hi,
We are also in SP12. So start process is not a problem, because you are getting an Information saying that "start trigger removed" right? It is not an error.
Are you getting this eror "expression must not return multiline value" after your complete Integration Process desgin ? If So...
I think you are getting this error in Transformation Step where you are doing N:1 mapping. In this step you are mentioning Interface mapping right? Once you mention Interface Mapping in Transformation step you need to give Source Message Structure as well as Target Message Structure. According to my understanding you are getting error here. You can check these errors, while design time itself. If your entries are showing with Red Border then it is understood that there is an error.
So if error is here then I think you need to check your N:1 Mapping. In this mapping your Source side Messages should be 0...unbounded. Similarly in Interface Mapping also. Just check for Source Message Occurences...
I think it will solve your problem.
Thanks,
Moorthy

Hp pavilion dv7-1247cl color stripes on start up and want go to windows sign on screen

hp pavilion dv7-1247cl starts with alot of colorful lines horizontal and vertical can hear windows come up but can't see it because of all the lines any idea on how to fix this issue?

Hi @destinystarr
Welcome to the HP Forums!
It is a fantastic place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that when you start your notebook you see lots of colorful vertical and horizontal lines and hear Windows in the background.
Here is a link to a document to assist you with this difficulty. Display Quality Issues.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Scheduled Task - Stop/Start processes and .exe

I've running some short batch files to stop a process and an .exe at just past midnight.
and then corresponding files to start a process and an .exe at 6am
I've set up Task Scheduler to run the Stops at 00:05 and 00:10
and then the starts at 06:30 and 06:40
However when I run tests, the scheduled tasks giving a status of "running" long after the the "stop" batch files have run.
How can i set them up so they run once, then stop running so there is no danger of conflict when the "start" tasks run in the morning.
I hope this is clear.
Thanks
Pete

Hi,
Please check the in the task manager (+show tasks from all users) to see if it is indeed still running. You could refer to the thread below to troubleshoot the issue:
TASK SCHEDULER: scheduler status is being “RUNNING” always
http://social.technet.microsoft.com/Forums/en-US/2f6dc29c-3b8b-45f5-a2a7-53e076acc062/task-scheduler-scheduler-status-is-being-running-always
If the issue still exists, the workaround is adding this line at the very end of the batch file:
TASKKILL /F /IM cmd.exe
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[HELP] ALE inbound process and Workflow handling problem

Hello,
first of all, i have to apologize about my english level. I will try to explain my problem (thanks for your patience ).
Well, I'm implementing an ALE inbound interface. My development at this point are:
- Customer Idoc Inbound function (with correct interface).
- Customer Basic Type
- Customer Message Type and correct assignment to the Basic Type (Tx WE81 and WE82)
- Customer Object Type (Subtype of IDOCAPPL)
- On BD51 I put "1" for my function.
- On WE57 I put this:
Processing by --> My function and type "F"
IDOC type --> My Basic type (without any extension)
Message --> My message type (without any message code or msg. function)
Object --> My object type (subtype of IDOCAPPL)
Direction --> "2" (Inbound)
- I created a process code for this interface (on WE42):
It is processed with ALE service and by a function module (my function).
On "Module(Inboud)" part I put my function and maximun number of repeats "0". On IDOC part I put my Object type with start event "INPUTERROROCURRED" and end event "INPUTFINISHED".
On application objet I put my Object type.
Rests of fields are blank.
- I defined a partner (WE20) with this new message type and process code.
- Also I created a Task (PFTC) for handle exceptions in inbound process. It has a rule for agent determinate.
I think it is all.
My problem is: when I process an IDOC (from WE19 for example) and it gets 51 status (error), it has to launch an event that trigger my task, is this way? Well I'm not getting any event.
I have all Workflow customizations OK (in this systems are running some Workflows).
In my function code, when I detect any error I put an error in the status table and put in WORKFLOW_RESULT the number '99999'.
Why I'm not getting any event? What I'm doing wrong?
Thanks in advance. Regards.

Hello again,
finally I've solved the problem. The solution for me, was a config on tx. WE42 and some missing code in the function, I only fill WORKFLOW_RESULT with '9999', but I didn't add any register to RETURN_VARIABLES table.
Regards.

M73 start problems and corrupted registry after windows updates

Hi,
we are a Lenovo reseller, having had not a lot troubles so far with M72 models in the past.
Since M73 the problems have dramatically exploded. We had so far 5 machines, on which we had to run the Factory Recovery as the OS won't start or was corrupted. It appears that especially after a windows updates the chances of a not starting Windows is very high - Windows repair mostly fails.
Is this a known issue? Does others have the same troubles? Any chance to fix this?
We are currently reviewing all Lenovo installations and will decide whether we still want to sell them or not. Our business clients are not happy about such an instable installation.

andreascis wrote:
Hi,
we are a Lenovo reseller, having had not a lot troubles so far with M72 models in the past.
Since M73 the problems have dramatically exploded. We had so far 5 machines, on which we had to run the Factory Recovery as the OS won't start or was corrupted. It appears that especially after a windows updates the chances of a not starting Windows is very high - Windows repair mostly fails.
Is this a known issue? Does others have the same troubles? Any chance to fix this?
We are currently reviewing all Lenovo installations and will decide whether we still want to sell them or not. Our business clients are not happy about such an instable installation.
We purchased many M72e's and recently appx 100 m73 standard builds and 100 recent custom M73 ax builds, we are regretting this right now. We are scrambling to try to keep these machines functioning properly. At first they seem good but they have tons of issues we are discovering, out fo our new 100, so far we have 10 dead machines, another bunch that have usb issues even after doing bios updates. Many pc's have issues with usb devices not working in one port but will in another. I believe lenovo has a serous problem on their hands with these machines they don't realize or want to admit.
Being the reseller puts you in a bad spot with a product like this. I believe this is a huge liability to anyone at this point in time, I will be going back to our reseller to deal with lenovo b/c I didn't get the help I was looking for with them directly. GOOD LUCK!

How do I forces FF 23 to open maximized, not full screen, but maximized, both on start up and when opening new windows?

Firefox 23 does not open maximized nor does it open new windows maximized. As such I have to manually maximize each window.
Run is set to maximized in the shortcut properties, yet it still opens in a normal or less than normal size window.
Older versions open maximized with no problem. I have Profile manager configured so that I can run multiple versions at the same time and everything opens maximized except FF 23.
is there some setting in the about:config interface or is this a genuine BUG in the latest version? Any help would be appreciated greatly.
Also can you tell me how to modify the title bar text/icon/etc as well as where to find the icon or portable network graphic (png) file for the main-window.ico or direct me to appropriate knowledge base articles for modifying both.

My localstore.rdf file was fine. The problem was caused by two plug-ins that Mozilla shows as being compatible with Firefox 23, when in fact they both cause undesired side effects.
Maybe the employees of Mozilla should actually test plug-ins before they allow them to be available for download or worse yet, recommend them.
And if any of the in-house developers had a clue they would stop removing old lines of code from Mozilla products so that new versions of Firefox would still be compatible with older plug-ins and extensions people would still like to use.
I had to remove recommended extensions and copy code from older versions of FF and NS and modify settings in about:config to allow older extensions to work to correct the problems and get Firefox to work the way I need it to. All in all I have over forty hours invested in modding FF at this point just to have it function the way it used to.
Unfortunately, since I still can't get buttons designed to open .URL links from the toolbar to work as they did in the past I have a feeling I'll be returning to older code sources to find more answers.
Lucky for me that I have every browser going back to NCSA Mosaic available to me, so every bit of code from the present till back before Mozilla existed is include in my knowledge base. It's a shame Mozilla doesn't keep such a reference available for it's users or apparently it's in house developers and staff.
Maybe I'll even re-enable the splash screen for Firefox since the only available plug-in for that doesn't appear to work with Version 23 either, even though once again the compatibility adviser says it does
It's truly sad that the result of Marc Andreessen's and James Clark's work and Netscape in general became the spawning Mozilla. What used to be a great browser and an acceptable replacement for Netscape, has become a joke. So much for all the hard work and effort made by Dave Hyatt and Blake Ross as well.
I guess that's what one should expect from the developers that are a part of generations X, Y, and Me. The attitudes associated with those generations show in the lack of thought, consideration, and ingenuity that have been a part the last several versions of FF, not to mention, the copying of features from Chrome.
When the only original idea to come out of Mozilla of late is to remove or disable features people have used and counted on for decades, the I don't care, I don't know, and me, me, me attitudes of so many from the aforementioned generations is truly evident in the last twenty incarnations of Firefox. Not to mention the attitudes and unhelpful nature of the responses users encounter when asking for help.

Concept of Sub Process and Starter Process in BPEL

Hi Forum -
With my limited understanding of BPEL I have found that if a process has to interact with another process it has to be exposed as a service however that is not good in all cases.
Is there a way in BPEL where once can create a process and do not expose it as service and still be able to call it from another BPEL process.
For example there can be a process called sendNotification and all the other processes if they want to send a notification can call this process.
In TIBCO there is a concept of Starter Process and Sub Process. A Starter Process is a process which will wait for an event to take place, like a web service request or a JMS message or a database adapter event and then this main process can call a sub process, just like the main program calling a function. This sub process need not be defined as a service in TIBCO and it can still accept an xml schema type as input.
Is this possible in BPEL?
Thanks!

10g -> Every process is a service.
11g -> Create a Composite, You could wire multiple BPEL Components and expose only the desired ones as a service through a mediator or directly the bpel. Mediator provide one more layer of virtualization and hides even the first master bpel component.
But if the send notification have to be reused outside the composite, it has to be an exposed service. Although it is exposed as a web service, it uses only WSIF binding to interact between bpel processes and not a soap binding(unless specifically instructed).
If you are looking for function kind of construct, you could create custom xpath functions (like logging etc.)
-Sridhar

Need to start process without SAP_BPM_SuperAdmin

We would like to give a class of users the ability to launch BPM processes without giving them SAP_BPM_SuperAdmin.
The problem with doing that, is that they could access NWA and change the process repository, if they found there way there.
Is there a way to just assign the role temporarily to the application?
Any thoughts?

Hi Jim,
Try this:
Create a wsdl in your bpm dc and assign it as an interface to the 'Start' of your bpm process. Build and depoy the bpm dc. Now create a small webdynpro dc with a button say Start Process and call the web-service which you have assigned to the Start of the process. Assign this wd dc to a page/role and assign it to the reqd users.
Hope it helps.
Regards

Stoping Start Process in Process Chain ...

Hi Guys,
We are working in BI 7.0 Planing and Forecasting System.
Here we are using one Meta chain which has a program that triggers 6 sub process chains.
Out of those subprocess chains 1 chain is running with green colour at Start Process stage only for the last 3 days.
We have checked the function module RSPC_PROCESS_FINISH, but we all have no authorization to execute that.
Please let me know is there any other approach to rectify this issue.
Points are awarded to ASAP replys.......
Thanks in advance
Peter

hi,
is the color of the start process is green? if so it might have triggerred the next process.
right click the start process then chk the chain option end time, is the satsus shows any time of completion? if so this process is completed. chk what is the next process .
chk the table RSPCPROCESSLOG by giving the instance of the start process and variant of the start process.
there you can find the status - chk if it is G, then the process is completed successfully. else if the status is F then it is just finished and will not trigger the next process and you have to trigger the next process manually if you dont have access to run the RSPC_PROCESS_FINISH.
chk this works or not - goto se38/se37 you have an option of information click on it and there you can specify the FM RSPC_PROCESS_FINIsh and search in FM, then surely it will take u to the FM and have the option to run it. give the instance,variant and logid of start process then give the status as G and execute it.
Ramesh

How to pass Employee number of MSS - Employee Search to Start Process

Hi All,
Just like HR admin role, Employee Information number is getting passed in Display Processes, Start Processes, and Personnel File, we have to make same scenario working for MSS also.
In MSS, General Information Page, when manager selects the Employee, then that Employee Number should get passed in Display Personnel File and also in Start Process.
I am new to HR module so I have not explined the requirement properlly, but Experts may be knowing this. Please help.
Regards,
Nikesh

Hi Siddharth Rajora,
I have actually 2 doubts..
1. You mean to say this can be done and is already implemented, but I think it will only work if we put "Display Personnel File and Start Process" under "Related Activities" area right ?
2. But user wants these views in the Detailed Navigation, so if he selects PERNER from general Information Page, and then if he clicks on "Start Process (under Detailed Navigation)" , then it shud show list of processes for that Employee.
Can you please guide me properly.

How to pass Employee number of MSS - General Information to Start Process.

Hi All,
Just like HR admin role, Employee Information number is getting passed in Display Processes, Start Processes, and Personnel File, we have to make same scenario working for MSS also.
In MSS, General Information Page, when manager selects the Employee, then that Employee Number should get passed in Display Personnel File and also in Start Process.
I am new to HR module so I have not explined the requirement properlly, but Experts may be knowing this. Please help.
Regards,
Nikesh

Hi Siddharth Rajora,
I have actually 2 doubts..
1. You mean to say this can be done and is already implemented, but I think it will only work if we put "Display Personnel File and Start Process" under "Related Activities" area right ?
2. But user wants these views in the Detailed Navigation, so if he selects PERNER from general Information Page, and then if he clicks on "Start Process (under Detailed Navigation)" , then it shud show list of processes for that Employee.
Can you please guide me properly.

Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
1. Shut down the computer
2. Reboot and open firefox
3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
6. Once it finally opens, backup your bookmarks,
7. Download a copy of firefox from there website
8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
9. install the new copy and BOOM! it works
If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

Adobe HCM Processes and Forms Start processes iView error

Hi,
We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
    at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
    at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
    ... 40 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
J2EE Engine 7.00 patchlevel 109044.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Session & Other
Session Locale en
Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
     ... 31 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
     at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
     at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
     at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
     ... 38 more
Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
Any help will be appreciated and rewarded accordingly.
Regards,
Thomas

hello,
how did you solve it ?
Regards,
Dimitry Haritonov

Start Excel and get workbook handle

Hi,
I would like to build a launcher which would start Excel 2013, and then register my xll file using "RegisterXLL".
One of my prototypes is starting the process, using the path to Excel.exe, and then it gets the window handle (the ultimate goal is to reach the COM application object in order to invoke RegisterXLL).
Thus I must find the child window whose name is "EXCEL7". I can get the main window handle from the process I have created, that's fine. But in order to get the child handle, I have tried 2 functions : EnumChildWindows and FindWindowExA,
which both are part of "user32.dll".
Unfortunately, I have to wait for a certain amount of time before calling these functions, otherwise they don't work. Basically, I wait for 1 or 2 seconds, then I call EnumChildWindows or FindWindowExA, and it works fine.
But if I don't wait, then EnumChildWindows does not enumerate anything, and FindWindowExA return 0. And once I have called one of them, I can retry even 10 seconds later, they will still not work.
Then I have no idea what I must wait for, or how long I must wait.
I would gratefully appreciate some help !
Thanks
Ron

Going back to my first approach using Windows apis, I noticed that if I refresh the process after a while, then I get a different value for the MainWindowHandle. From that value, I can do the work.
Then here is my final solution :
1) Get the MainWindowHandle
2) Enumerate the child windows (using FindWindowExA or EnumChildWindows)
3) If the child window called "EXCEL7" is not found then refresh the process and go to 1). If the window was found then continue.
It works !
ProcessStartInfo info = new ProcessStartInfo(excelPath, "/x")
UseShellExecute = false,
CreateNoWindow = true
Process process = new Process
StartInfo = info
process.Start();
IntPtr hWndChild = IntPtr.Zero;
do
process.WaitForInputIdle();
StringBuilder cname = new StringBuilder(256);
EnumChildWindows(process.MainWindowHandle, delegate(IntPtr hWndEnum, IntPtr param)
GetClassNameW(hWndEnum, cname, cname.Capacity);
if (cname.ToString() == "EXCEL7")
hWndChild = hWndEnum;
return false;
return true;
}, IntPtr.Zero);
if (hWndChild == IntPtr.Zero)
Thread.Sleep(100);
process.Refresh();
} while (hWndChild == IntPtr.Zero);
IntPtr pUnk = IntPtr.Zero;
int hr = AccessibleObjectFromWindow(hWndChild, OBJID_NATIVEOM, IID_IDispatchBytes, ref pUnk);
if (hr >= 0)
dynamic obj = Marshal.GetObjectForIUnknown(pUnk);
dynamic app = obj.Application;
app.RegisterXLL(xllPath);

Start Process and inherited handles on Windows

Similar Messages

Maybe you are looking for