Start routine..where RECORDMODE=blank i the psa.

Hi Friends,
while loading data from PSA to DSO,i am getting an error in the dso, saying that got duplicate records in the psa, but we don't have any duplicate records.
my question is to load the data in to the DSO, i need to write a start routine where it should pick from PSA only the records whcih RECORDMODE=blank.
could u guide me how to write it pls.
Thanks in advance.

Hi follow this code
this will work surely.
Loop at DATA_PACKAGE.
If DATA_PACKAGE-RECORDMODE NE ' '.
DELETE DATA_PACKAGE WHERE RECORDMODE NE ' '.
ENDIF.
ENDLOOP.
Regards
Ram

Similar Messages

HT4061 Hello. My iphone is dead and doesn´t start. Where can I find the serial number?

My iphone doesn´t start so I can not find my serial number? I need to replace it. How do I do?

All the numbers are either on the back of the phone or on the original box..
Your Carrier will have the info..
If you bought it from a Carrier return it to them.
If you bought it direct from Apple Call Them.
I presume it is a new iPhone and under warranty or Applecare+
With a New iPhone you have 90days Free Help via Apple..

ABAP Help at start routine of Update rule

Good After Noon All,
My requirement is that cube ZAPO_C24M theres an UPDR flowing from 8ZAPO_C24M back to itself so to speak.The request is to change the data in the cube from Fiscal Year Variant Z3 to Z4.
But in start routine i have to take the existing record and reverse all of the key figures, and also change the RECORDMODE of the record to indicate it is a reversal record. This for specific Country KR and for these country the Fiscal variant is Z3. Again in the start routine, create a new record identical to the existing record that has Fiscal Year Variant Z4 instead of Z3.
So the idea is wed load from the cube and send back to the cube one record that reverses out the existing data, and another record that contains the same data but with Fiscal Variant Z4 instead of Z3.
Please Help me.
Points will be awarded for the right answer

Hi Vaishali,
In the start routine copy the DATA_PACKAGE to a local table.
Select the records where the specific country is KR.
Delete all other records.
Then read the records in loop, Keep one record same and just change the fiscal year variant.
And for the same multiply all the key figures by -1.
Transfer the content of the local table back to DATA_PACKAGE.
maintain one to one mapping in the update rule.
I am sure it will update, but you need to be sure that if you change Fiscal year variant then probably your fiscal period value should change. In that case you have to update it accordingly in the start routine.
Regards.

Start routine and update rules

Hi,
What is accessed first:-
Start Routines or Update Rules?
What is the use of global variables in start routine?
Please reply.
Thanks.

Hi......
You have different types of Routines in BW .
1) Start Routine in Transfer Rules
2) Transfer Routine in Transfer Rules.
3)Start Routine in Update Rules
4)Update Routine in Update Rules.
The routines that you write in transfer rules are applicable to all the Data targets that get the data from that particular Infosource, when you are going to write some code in Transfer rules, you have to understand that you are going to manupilate the data that is going to get into BW .
If you are going to write in Update Rules , then that logic is going to apply only for that particular Data target .
Eg : Let suppose I have a Flat file that gets data from 3 countries, US, Canada and Mexico.
Now I have prepared the data source for the same . But I dont want to have the data of Mexico in to BW itself.
So I will write a Start routine at TR to eliminate the data of Mexico.
My Next step is I want the data of US into one ODS and Canada data in to another ODS.
For this I handle the dataflow at Start routine in Update rules, to eliminate Canada data for US ODS and Vice Versa.
Global variables in Start routine
You can have global variables, internal tables populated by the
startup routine. This data will be available to the field
routines. Create yourself a start routine, declare some
variables in the global section, and then create a field
routine. You will be able to use the globally declared objects
in the field routine
Please check below help link for routines in sap netweaver 2004s
http://help.sap.com/saphelp_sem60/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/frameset.htm
How to guide "How to transformations routines".Please check the below link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/dc1d9990-0201-0010-16aa-db3c4eb8b642
start routine in transfer rules
Look up to load master data
excluding
Start Routine in Transfer Rules
Sample code in Update Rule to restrict data selection?
Append Datapak - transfer start routine
Excluding Blank field in Infopackage Filter
Trans Routine ABAP help ..
transfer routine
Date key figure: Convert DATS format to DEC format
Date Conversion in Flat File
Transfer Routine ABAP
conversion exit
Date Conversion
Problem with conversion char to numc in transference rules
conversion routine..?
update routine
How to call a function in Update Rules to reverse a key figure sign
Need Sample Code for Update Rules
Date calculation
Difference between data in PSA and Data in Infocube
No RETURNCODE <> 0 allowed in update routines in transfer mode
the diffrerece between DEC and (yyyymmdd) 8 char in Time defination
Access master data in update rules
Date key figure: Convert DATS format to DEC format
start routine in update rules
Is it possible to read a third ODS in update rules between two ODS?
update rule coding while loading data from ODS to CUBE
Start Routine in Update Rules to populate additional fields from ODS
Coding in Update Rules accessing a Z-Table
Start routine
Hope this helps you..........
Regards,
Debjani.........
Edited by: Debjani Mukherjee on Oct 1, 2008 4:58 PM

Start routine internal table data is inaccessible.

Hi Guru,
I have written a small code in start routine using internal tables. The internal table has 4 fields. Intially first 3 fields are populated from ods for only the records in the data package. Then the 4th field is modified using loop on internal table. Then a sort is done on internal table and deleting the adjacent records. Now the data is read from internal table in updates rules. But data is not populating for the fields in listcube. I guess the loop on internal table is not modifying the internal table, below is the code.
Types: BEGIN OF ITAB1,
doc_no LIKE /BIC/AZFGLO10100-AC_DOC_NO,
item_no LIKE /BIC/AZFGLO10100-ITEM_NUM,
taxjur LIKE /BIC/AZFGLO10100-TAXJURCODE,
z_len TYPE I,
END OF ITAB1.
DATA ITAB_01 TYPE TABLE OF ITAB1 WITH HEADER LINE.
DATA LEN TYPE I.
DATA: str1 TYPE string,
str2 TYPE string,
doc like /BIC/AZFGLO10100-AC_DOC_NO,
item like /BIC/AZFGLO10100-ITEM_NUM,
jur like /BIC/AZFGLO10100-TAXJURCODE.
***filling the internal table with the contents of
select AC_DOC_NO ITEM_NUM TAXJURCODE into
corresponding fields of itab_01
from /BIC/AZFGLO10100
FOR ALL ENTRIES IN DATA_PACKAGE
WHERE AC_DOC_NO = DATA_PACKAGE-AC_DOC_NO
AND ITEM_NUM = DATA_PACKAGE-ITEM_NUM.
endselect.
SORT ITAB_01 ASCENDING BY doc_no ITEM_NO ASCENDING.
loop at itab_01.
doc = itab_01-doc_no.
item = itab_01-item_no.
TAX = itab_01-taxjur.
len = STRLEN(tax).
itab_01-z_len = len.
modify itab_01 transporting z_len where
doc_no = doc and item_no = item.
ENDLOOP.
***what I am doing here I am keep only the records in itab which has minimum
tax jurisdiction length for a line item in a document*****
SORT ITAB_01 DESCENDING BY doc_no z_len ASCENDING.
DELETE ADJACENT DUPLICATES FROM itab_01 comparing doc_no.
and for zlenght object I am writing the followoing code in update rules.
read table itab_01 with key doc_no = COMM_STRUCTURE-AC_DOC_NO
BINARY SEARCH.
if sy-subrc = 0.
RESULT = itab_01-z_len.
endif.
But the field z_len field is blank for all fields.
Any help is really appreciated.
Thanks,
Raj

hi Ravi,
try to give same field name in internal table and /BIC/AZFGLO10100, change the code accordingly
Types: BEGIN OF ITAB1,
AC_DOC_NO LIKE /BIC/AZFGLO10100-AC_DOC_NO,
ITEM_NUM LIKE /BIC/AZFGLO10100-ITEM_NUM,
TAXJURCODE LIKE /BIC/AZFGLO10100-TAXJURCODE,
z_len TYPE I,
END OF ITAB1.
DATA ITAB_01 TYPE TABLE OF ITAB1 WITH HEADER LINE.
***filling the internal table with the contents of
select AC_DOC_NO ITEM_NUM TAXJURCODE into
corresponding fields of itab_01
from /BIC/AZFGLO10100
FOR ALL ENTRIES IN DATA_PACKAGE
WHERE AC_DOC_NO = DATA_PACKAGE-AC_DOC_NO
AND ITEM_NUM = DATA_PACKAGE-ITEM_NUM.
endselect.

BW 3.5 Start Routine Start Routine Code

Hi,
I am writing a Start Routine in BW 3.5 and the logic we have seems to be working but not updating the target ods. We are adding a date field to the target ODS and need to source it from another ODS. The key structures for each ods is different
Taget ODS:
Header
Line ITem
Schedule Line
Source ODS:
Header
Line Item
When we run the start routine the date field will not update for the schedule lines, it will create a new record in the target ods with the Header Line ITem and Date.
Has anyone had to code this logic before in a 3.5 Start Routine, where you needed to update a date field with ODS with different key strucutures.
Thanks for any help on this issue.

Its difficult in BW 3.5 to include this logic in START_ROUTINE as you cannot add the extra to_date field to the DATA_PACKAGE table.
You need to create a new global internal table with the same structure of DATA_PACKAGE with additional field to_date. then use the logic to fill in the global internal table
define a internal table new_data_package with the required structure like (docno, eventtype, fromdate todate)
data: l_w_datapkg_001 type data_package,
data: l_w_newdatapkg type new_data_package,
data: l_w_datapkg_011 type data_package
LOOP AT DATA_PACKAGE INTO l_w_datapkg_001 WHERE event_type = '001'.
l_w_newdatapkg-docno = l_w_datapkg_001-docno.
l_w_newdatapkg-event_type = l_w_datapkg_001-event_type.
l_w_newdatapkg-fromdate = l_w_datapkg_001-date.
MOVE CORRESPONDING FIELDS OF l_w_datapkg_001 INTO l_w_newdatapkg.
READ TABLE data_package INTO l_w_datapkg_011
WITH KEY docno = l_w_datapkg_001-docno
event_type = '011'.
l_w_newdatapkg-to_date = l_w_datapkg_011-date.
APPEND l_w_newdatapkg TO new_data_package
ENDLOOP.
Now the new datapackage contains the ODS2 data that u needed

Index used or not for selecting data from ODS in a start routine

Dear friends,
In the start routine of the update rules to a cube, I am reading some data of an ODS in to an internal table .
The ODS is indexed. But, I am not sure if the index is at all used in the Select statement (that gets the data from ODS to the internal table in the start routine) while loading data to the cube.
Any help is highly appreciated.
regards,
atlaj

Hi Atlaj
You can findout this is display execution plan for SQL statement in DB02.
Goto DB02. and under diagnostic, you find explain. Select that and enter your query. Make sure that everything here is in capital format. Below is a sample query which I have entered.
SELECT "CRM_SALORG" "SALESORG" FROM "/BI0/QORGUNIT"
WHERE "SALESORG" = ? AND "OBJVERS" = ? AND "DATETO" >= ?
AND "DATEFROM" <= ?
The select parameters should be inside qoutes and in caps and even the from table. Once you enter your query in this format, click on explain. It will show the index scan if the index is present. the output for my query will be something like
0 SELECT STATEMENT ( Estimated Costs = 1,348E+01 [timerons] )
 1 (COOR) RETURN
 2 ( 0) TQ
 3 ( 0) FETCH /BI0/QORGUNIT
 4 ( 0) IXSCAN /BI0/QORGUNIT~Z1
Where my last statement (line 4) is showing index scan and the name of index read is Z1.
Hope this helps.
Please let me know if you have any problems entering the query in the specified format and u get any error.
Regards
Sriram

Getting Error In the Routine - While writing Code for the Cross Reference.

Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
 ZMDES type /BIC/TZMDES-/BIC/ZMDES,
 TXT type /BIC/TZMDES-TXTSH,
 end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
 InfoObject: 0LOGSYS.
 LOGSYS TYPE RSDLOGSYS,
 InfoObject: ZPRJ3.
 /BIC/ZPRJ3 TYPE /BIC/OIZPRJ3,
 InfoObject: ZDOM3.
 /BIC/ZDOM3 TYPE /BIC/OIZDOM3,
 Field: RECORD.
 RECORD TYPE RSARECORD,
 END OF tys_SC_1.
 TYPES:
 tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
 WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in Advance

I have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name>

Execute ABAP code in Start Routine only once

I have ABAP code in a start routine that I only want to execute once. Is there a way to tell this is first execution of the start routine?
Also can I find out these value in the start routine ABAP:
1. How many data packets there are?
2. What data packet I am processing?
Regards,
Mike...

Hi,
I've just setup a little test:
TRules, Start Routine Global Decl:
DATA: GVI TYPE I, GVN(5) TYPE N.
Start Routine:
IF GVI IS INITIAL.
GVI = 1.
ELSE.
ADD 1 TO GVI.
ENDIF.
MOVE GVI TO GVN.
This is basically counting the times the start routine is executed and populating the var GVN; I am posting GVN in a char ZTESTGV in the target cube. I am posting as well the datapakID in my cube.
I have loaded two requests (each 4 packets)
the first one first to PSA and then from the PSA to the target: this is Serially using one single process. Here's the result in the cube:
Request________________________________DATAPAKID_____ZTESTGV
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________1____________1
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________2____________2
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________3____________3
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________4____________4
In this case the global variable is persistent accross packets.
the second request is loaded in paralell: this is, multiple processes are executed at the time. Here's the result in the cube:
Request________________________________DATAPAKID_____ZTESTGV
REQU_14QVH21BSVH44FAJW94BD7N2H____________1____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________2____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________3____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________4____________1
In this case the global variable is always1 !!
This is logic since several a process cannot access the internal memory used by another one...
Conclusion; the global variable will work only if the load is serial...
hope this helps...
Olivier.

Filter data in transfer rules using start routine

Hi all!
I am an absolute newbie here, but I have a question regarding start routines and I noticed many questions get solved around here. My situation is the following: I have to create a start routine where the data to be transferred is filtered on an attribute "DESTINAT" in info object "0BILL_TYPE". DESTINAT can be 'M' or 'D' and depending on that letter, data must flow to a separate ODS.
Well,I came up with the following:
somewhere in my start routing I guess I'll have to put:
loop at data_pak.
DELETE DATAPAK Where DESTINAT = 'D'
endloop.
When I place this in my start routine of my transfer rules leading to the ODS where data must be of DESTINAT type 'M', will this do the trick?
I want to put the following code in the transfer rules leading to my other ODS, where data must be of type DESTINAT = 'D':
loop at data_pak.
DELETE DATAPAK Where DESTINAT = 'M'
endloop.
I'm sorry that this is a very basic question, but like I said: I'm a newbie in SAP...

hi Joris,
have a lok at the foll help docs.:
http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/732c42be6fde2ce10000000a1550b0/content.htm
cheers
shameem

DTP selection criteria in start routine

Hi,
I have a code in the start routine where a variable lv_date gets the date from the DTP selections...
DATA : i_filter TYPE rsbk_th_range,
            wa_filter TYPE rsbk_s_range.
READ TABLE i_filter INTO wa_filter WITH KEY
      fieldnm = 'ACT_GI_DTE '.
    IF sy-subrc EQ 0.
      lv_date = wa_filter-low.
   ELSE.
But now my problem is that we are no more giving the range, instead we are giving the single value. so now my code should read the single value ( lv_date = wa_filter-low) instead of the low value of the range. So how can I achieve this?
I mean my lv_date should get the single value populated in the DTP selections instead of the low value of the range values.
How can i achieve this??
Regards,
Shreesh.

Hi,
When you give range in any variable, it lower value is captured in low whereas upper value is captured in high of the variable.
Now that you are no more giving range but only single values, it would be enough if your code reads the data from low of the variable.

Calculate working dates - start routine or characteristic routine?

Dear all
I need to fill key figure with number of working dates in transformation
There is a key figure START_DATE in and I need to populate WORK_DAYS like CURRENT_DATE - START_DATE excluding holidays and weekends
I checked this thread and read some sample code:
/message/10006808#10006808 [original link is broken]
But where I need to add sample code of working days calculation - in start routine and characteristics routine or only at characteristic routine?

Hello there,
In the characteristic routine.
start routine will be executed before the characteristic assignment, and is better for instance to add records or remove records, etc. The characteristic assignment comes after with characteristic routines, and for each record this assignment and characteristic routine is done. If you have already the START_DATE and CURRENT_DATE you can proceed with the calculation on each record (with the characteristic routine assignment).
Hope this helps,
Regards,
Diogo

Defining a customer method in start routine and using in char-routines

Hi,
can I define an own method in start routine and use this method in several routines for characteristics or key-figures?
If yes, can anybody give me a short description where to define the new method (e.g. in wich section of the start routine), where to implement the new method and how to use the new method in transformation of char or key-figures.
Thanks for your help
Thomas

Hi,
If you are looking for something like global method it is not possible. But you can create a function module in SE37 and you can use the same wherever you want.
Regards
Githen

Syntax error in Start Routine routine 9998 in transformation

Hi Guyz,
I am getting the below error while doinf the syntax check in start routine in one of the transformation in BW production after the failed TR movement
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
but for the same transformation in quality its showing no syntax errors found.
its an odd behaviour.
please guide with ur expertise.
cheerz,
raps.

Hi,
Check the note 1052648. it says that:
Start routine:
           In the start routine, all the fields from the source are always available.
During the migration, a type '_ty_t_SC_1_full' is generated in '2nd part global'. Since Note 1325124, this type has been adjusted when the field list is changed. In the past, a change to the field list caused syntax errors of the type:
For update rules:
                    E: For PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATA_PACKAGE".
For transfer rules:
                    E:For PERFORM or CALL FUNCTION "STARTROUTINE", the actual parameter "SOURCE_PACKAGE" is not compatible with the formal parameter "DATAPAK".
           If this error continues to occur, go to the solution section to correct it.
           Solution:
           This error should now be automatically corrected with Note 1325124. Access the incorrect start routine in change mode. The type '_ty_s_SC_1_full' is then automatically adjusted to the source structure. If this does not work, you should use the tool 'RSTRAN_MIGRATION_CHECK' (described in Note 1369395) to check and possibly repair the transformation in question.
           If this error still occurs, you can correct it manually as follows:
           Copy the field list of the type     '_ty_s_SC_1' from the 'private section' of the CLASS lcl_transform DEFINITION (you can find this when you scroll up in the routine editor of the start routine) to the type '_ty_s_SC_1_full' of '2nd part global'.
Regards,
Anil Kumar Sharma .P

Guide me write Start Routine

Dear One's -
I have a scenario to be implements in my ODS update rules,
The code has to check if all available LEAD PROGRAM DEFINITION of particular LEAD NUMBER (as available in ODS) are also present in the corresponding data_package or not.
If it does not find particular LEAD PROGRAM DEFINITION in the data_package (but it is there is ODS) then it has to creat one record in data_package for that LEAD NUMBER and LEAD PROGRAM DEFINITION making all Key figures as "zero". It then overwrite existing value in ODs with zero value.
This start routine has to written because the deleted record in source system is not transfered to BW system.
Can any one kindly take a moment in writing the code.
Thank you so much in advance,
Raj

Dear Edwin,
We are using Generic Data Source and the situation is we must write the start routine because there was already a routine written under other Invoice Moment ODS that is happening successfully. But this is new requirement for Resource ODS.
I have written a similar routine to Resource ODS like Invoice Moment ODS but this not giving expected result.
So, can you kindly write a routine in your own logic?
We have given with Lead Number, Lead Program definition as characteristics and key fingure as Lead Estimated Resources that's all only 3 infoobjects were used.
Thanks for your concern and extend the same in writing the code.

Start routine..where RECORDMODE=blank i the psa.

Similar Messages

Maybe you are looking for