Start - stop with two daq counters

I have the following problem:
I have two channels. One channel consist of one ttl pulse, repeated with a frequency nu1. The other channel consist of two ttl pulses (with a certain distance in time deltat1= (B-C)), repeated with a frequency nu1.
The scheme below should help to visualize
......][......A....................][.....
......][............B....C........][......
I would like to measure the time difference B-A, and C-A.
Is there a simple way to do that using the counters? I have a DAQ card of NI with two counters on it and LV 6.0. Any suggestion would be greatly appreciated.
Thanks you a lot
-Claudio

Hi,
What you need is 'Two Edge Seperation Measurment', and this is only available on a NI-TIO based devices (660x family). This can not be achieved with the card you have - I assume it is an E-Series card. There is a shipping example that ships with LabVIEW 6.0 that would measure edge seperation (Two Edge Seperation Measurement (NI-TIO).vi).
Regards,
RamziH.

Similar Messages

  • DB start & Stop With Multiple Homes

    I have four instances on my box in total. Two instances(orcl & prod) run on a file system, One instance (+Asm) is ASM storage and the last instance(test) uses the asm storage.
    Following are the contents of my oratab file in /etc/oratab
    orcl:/u01/oracle/software:Y
    +ASM:/home/oracle/oracle/product/10.2.0/db_2:Y
    test:/u01/oracle/software:Y
    Prod:/u01/oracle/software:Y
    Following is my db startup and shutdown script:-
    ORACLE_HOME=/u01/oracle/software
    ORA_OWNER=oracle
    case $1 in
    'start')
    #If the system is starting, then .
    su - $ORA_OWNER -c $ORACLE_HOME/bin/dbstart #Start the database
    'stop')
    #If the system is stops, that is we.re shutting down our OS, then
    su - $ORA_OWNER -c $ORACLE_HOME/bin/dbshut
    esac
    When i hash out # the instances using asm in /etc/oratab (+ASM & test) the script works fine as usual i.e it will show me orcl and prod when i do a ps -ef | grep pmon , but once i un-hash all the instances in the oratab it doesnt bring up any instance on startup.
    And what's funny is when i run the script manually like this su - $ORA_OWNER -c $ORACLE_HOME/bin/dbstart, it would bring up all the instances.
    Not sure what the problem is, can you point it out please.

    Hi sb97025,
    Here are the results after doing as you asked me.
    The First result below is in interactive mode
    _=/bin/env
    G_BROKEN_FILENAMES=1
    HISTSIZE=1000
    HOME=/home/oracle
    HOSTNAME=localhost.localdomain
    INPUTRC=/etc/inputrc
    KDEDIR=/usr
    LANG=en_US.UTF-8
    LD_LIBRARY_PATH=:/u01/oracle/software/lib
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    LOGNAME=oracle
    LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    MAIL=/var/spool/mail/oracle
    ORACLE_HOME=/u01/oracle/software
    ORACLE_SID=Texas
    PATH=/u01/oracle/software/bin:/bin:/usr/bin:/etc
    PWD=/tmp
    SHELL=/bin/bash
    SHLVL=2
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SSH_CLIENT=::ffff:192.168.1.100 3063 22
    SSH_CONNECTION=::ffff:192.168.1.100 3063 ::ffff:192.168.1.102 22
    SSH_TTY=/dev/pts/2
    TERM=xterm
    USER=oracle
    VER10LIST=10
    The second one is the output on system reboot
    _=/bin/env
    G_BROKEN_FILENAMES=1
    HISTSIZE=1000
    HOME=/home/oracle
    HOSTNAME=localhost.localdomain
    INPUTRC=/etc/inputrc
    KDEDIR=/usr
    LANG=en_US.UTF-8
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    LOGNAME=oracle
    LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    MAIL=/var/spool/mail/oracle
    ORACLE_HOME=/u01/oracle/software
    ORACLE_SID=orcl
    PATH=/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin:/u01/oracle/software/bin
    PWD=/home/oracle
    SHELL=/bin/bash
    SHLVL=1
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SSH_CLIENT=::ffff:192.168.1.100 3063 22
    SSH_CONNECTION=::ffff:192.168.1.100 3063 ::ffff:192.168.1.102 22
    SSH_TTY=/dev/pts/2
    TERM=xterm
    USER=oracle

  • Help with getting Web Start working with two-way SSL

    I have successfully transferred data (myclient.jnlp) utilizing web browsers (IE and Mozilla) from my web server (which is set up for two-way SSL "CLIENT-CERT" required) after using the browser's utility to "import" my client-side cert (in .p12 format).
    After the browser connects and downloads the "myclient.jnlp" contents and places it in a temporary file, it then kicks off the javaws process with the temporary file as a parameter. The first thing javaws does is utilize the codebase and href values (found in the temporary file) to make a "GET" call to the server for the "myclient.jnlp" file (again).
    However, this fails (with a SSL handshake error) since javaws uses a different keystore than IE - the server does not receive the client-side cert. I have imported the root CA and the client cert (in .pem format) into the $JAVA_HOME/jre/lib/security/cacerts file using the keytool command but alas my server still indicates a lack of a client-side cert.
    Has anyone else tried this and got it working?

    Hi Richard,
    Indeed it appears that the 1.5 version will have more built-in capability for client certs. It has the look of the IE browser import capability. Unfortunately, I am stuck with having to utilize 1.4.2 for the time being. Since I have posted my original message I have found more information but have yet to get it all working. The truststore in javaws 1.4.2 does have a default (the 1.4.2 jre's cacert file - stragely enough not the same one that gets updated when you import the root CA! - but this has been noted in many other threads). The javaws keystore does not have a default and I have tried, to no avail yet, to utilize some command line parameters, see http://java.sun.com/j2se/1.4.2/docs/guide/security/jsse/JSSERefGuide.html#Customization - to get my client cert "available" and recognized by javaws.
    With the help of some debug flags here is the output on my javaws "output" log - all seems to go well up to the point of the client's Certificate chain (which appears to be empty), after the ServerHelloDone :
    trustStore is: C:\j2sdk1.4.2_04\jre\lib\security\cacerts
    trustStore type is : jks
    init truststore
    adding as trusted cert:
    snipped all the regular trusted certs, left my root CA as proof it is recognized...
    adding as trusted cert:
    Subject: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    Issuer: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    Algorithm: RSA; Serial number: 0x0
    Valid from Wed May 26 16:38:59 EDT 2004 until Fri Jun 25 16:38:59 EDT 2004
    trigger seeding of SecureRandom
    done seeding SecureRandom
    %% No cached client session
    *** ClientHello, TLSv1
    RandomCookie: GMT: 1070211537 bytes = { 205, 211, 129, 234, 88, 129, 152, 176, 223, 180, 161, 138, 246, 183, 181, 89, 61, 252, 63, 35, 21, 34, 253, 32, 254, 124, 38, 198 }
    Session ID: {}
    Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA]
    Compression Methods: { 0 }
    [write] MD5 and SHA1 hashes: len = 73
    0000: 01 00 00 45 03 01 40 CA 22 D1 CD D3 81 EA 58 81 ...E..@.".....X.
    0010: 98 B0 DF B4 A1 8A F6 B7 B5 59 3D FC 3F 23 15 22 .........Y=.?#."
    0020: FD 20 FE 7C 26 C6 00 00 1E 00 04 00 05 00 2F 00 . ..&........./.
    0030: 33 00 32 00 0A 00 16 00 13 00 09 00 15 00 12 00 3.2.............
    0040: 03 00 08 00 14 00 11 01 00 .........
    Thread-3, WRITE: TLSv1 Handshake, length = 73
    [write] MD5 and SHA1 hashes: len = 98
    0000: 01 03 01 00 39 00 00 00 20 00 00 04 01 00 80 00 ....9... .......
    0010: 00 05 00 00 2F 00 00 33 00 00 32 00 00 0A 07 00 ..../..3..2.....
    0020: C0 00 00 16 00 00 13 00 00 09 06 00 40 00 00 15 ............@...
    0030: 00 00 12 00 00 03 02 00 80 00 00 08 00 00 14 00 ................
    0040: 00 11 40 CA 22 D1 CD D3 81 EA 58 81 98 B0 DF B4 ..@.".....X.....
    0050: A1 8A F6 B7 B5 59 3D FC 3F 23 15 22 FD 20 FE 7C .....Y=.?#.". ..
    0060: 26 C6 &.
    Thread-3, WRITE: SSLv2 client hello message, length = 98
    Thread-3, READ: TLSv1 Handshake, length = 58
    *** ServerHello, TLSv1
    RandomCookie: GMT: 1070211539 bytes = { 81, 106, 82, 45, 233, 226, 89, 6, 38, 240, 71, 122, 90, 226, 255, 207, 9, 102, 205, 127, 223, 211, 4, 84, 79, 16, 101, 89 }
    Session ID: {34, 167, 132, 174, 141, 4, 57, 197, 190, 207, 105, 117, 241, 9, 97, 81}
    Cipher Suite: SSL_RSA_WITH_DES_CBC_SHA
    Compression Method: 0
    %% Created: [Session-1, SSL_RSA_WITH_DES_CBC_SHA]
    ** SSL_RSA_WITH_DES_CBC_SHA
    [read] MD5 and SHA1 hashes: len = 58
    0000: 02 00 00 36 03 01 40 CA 22 D3 51 6A 52 2D E9 E2 ...6..@.".QjR-..
    0010: 59 06 26 F0 47 7A 5A E2 FF CF 09 66 CD 7F DF D3 Y.&.GzZ....f....
    0020: 04 54 4F 10 65 59 10 22 A7 84 AE 8D 04 39 C5 BE .TO.eY.".....9..
    0030: CF 69 75 F1 09 61 51 00 09 00 .iu..aQ...
    Thread-3, READ: TLSv1 Handshake, length = 607
    *** Certificate chain
    chain [0] = [
    Version: V3
    Subject: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    e2bd8de9 598e0735 2bed2057 3800c83d 348550e2 93a017c7 9845f35f cd7b4ada
    6ef0c70f 7a033e69 a97ccd15 46f0d1c8 7a0ae909 ddb76f5b cd8029e6 3a6a4965
    Validity: [From: Wed May 26 16:38:59 EDT 2004,
                   To: Fri Jun 25 16:38:59 EDT 2004]
    Issuer: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    SerialNumber: [    00]
    Certificate Extensions: 3
    [1]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: 3F A7 DF 1F FA 90 1F 98 4F BA 42 9F 21 7D B4 C4 ?.......O.B.!...
    0010: 88 76 14 DA .v..
    [2]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: 3F A7 DF 1F FA 90 1F 98 4F BA 42 9F 21 7D B4 C4 ?.......O.B.!...
    0010: 88 76 14 DA .v..
    [CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US]
    SerialNumber: [    00]
    [3]: ObjectId: 2.5.29.19 Criticality=false
    BasicConstraints:[
    CA:true
    PathLen:2147483647
    Algorithm: [SHA1withRSA]
    Signature:
    0000: 29 CB D0 48 E2 89 2F 8D 4A A6 73 11 71 EB 58 9D )..H../.J.s.q.X.
    0010: 9E 0C 44 1F 87 C2 A3 3C C0 E7 9A E3 C4 BC A7 DD ..D....<........
    0020: C4 FC 52 F1 A9 72 65 14 99 C1 A7 62 61 35 91 D8 ..R..re....ba5..
    0030: AE FF FB FF 82 D8 1C EE 03 02 77 03 19 6A B0 06 ..........w..j..
    Found trusted certificate:
    Version: V3
    Subject: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
    Key: SunJSSE RSA public key:
    public exponent:
    010001
    modulus:
    e2bd8de9 598e0735 2bed2057 3800c83d 348550e2 93a017c7 9845f35f cd7b4ada
    6ef0c70f 7a033e69 a97ccd15 46f0d1c8 7a0ae909 ddb76f5b cd8029e6 3a6a4965
    Validity: [From: Wed May 26 16:38:59 EDT 2004,
                   To: Fri Jun 25 16:38:59 EDT 2004]
    Issuer: CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US
    SerialNumber: [    00]
    Certificate Extensions: 3
    [1]: ObjectId: 2.5.29.14 Criticality=false
    SubjectKeyIdentifier [
    KeyIdentifier [
    0000: 3F A7 DF 1F FA 90 1F 98 4F BA 42 9F 21 7D B4 C4 ?.......O.B.!...
    0010: 88 76 14 DA .v..
    [2]: ObjectId: 2.5.29.35 Criticality=false
    AuthorityKeyIdentifier [
    KeyIdentifier [
    0000: 3F A7 DF 1F FA 90 1F 98 4F BA 42 9F 21 7D B4 C4 ?.......O.B.!...
    0010: 88 76 14 DA .v..
    [CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US]
    SerialNumber: [    00]
    [3]: ObjectId: 2.5.29.19 Criticality=false
    BasicConstraints:[
    CA:true
    PathLen:2147483647
    Algorithm: [SHA1withRSA]
    Signature:
    0000: 29 CB D0 48 E2 89 2F 8D 4A A6 73 11 71 EB 58 9D )..H../.J.s.q.X.
    0010: 9E 0C 44 1F 87 C2 A3 3C C0 E7 9A E3 C4 BC A7 DD ..D....<........
    0020: C4 FC 52 F1 A9 72 65 14 99 C1 A7 62 61 35 91 D8 ..R..re....ba5..
    0030: AE FF FB FF 82 D8 1C EE 03 02 77 03 19 6A B0 06 ..........w..j..
    [read] MD5 and SHA1 hashes: len = 607
    0000: 0B 00 02 5B 00 02 58 00 02 55 30 82 02 51 30 82 ...[..X..U0..Q0.
    0010: 01 FB A0 03 02 01 02 02 01 00 30 0D 06 09 2A 86 ..........0...*.
    0020: 48 86 F7 0D 01 01 05 05 00 30 57 31 0B 30 09 06 H........0W1.0..
    0030: 03 55 04 06 13 02 55 53 31 11 30 0F 06 03 55 04 .U....US1.0...U.
    0040: 08 13 08 56 69 72 67 69 6E 69 61 31 10 30 0E 06 ...Virginia1.0..
    0050: 03 55 04 07 13 07 46 61 69 72 66 61 78 31 11 30 .U....Fairfax1.0
    0060: 0F 06 03 55 04 0A 13 08 5A 6F 72 6B 2E 6F 72 67 ...U....Zork.org
    0070: 31 10 30 0E 06 03 55 04 03 13 07 52 6F 6F 74 20 1.0...U....Root
    0080: 43 41 30 1E 17 0D 30 34 30 35 32 36 32 30 33 38 CA0...0405262038
    0090: 35 39 5A 17 0D 30 34 30 36 32 35 32 30 33 38 35 59Z..04062520385
    00A0: 39 5A 30 57 31 0B 30 09 06 03 55 04 06 13 02 55 9Z0W1.0...U....U
    00B0: 53 31 11 30 0F 06 03 55 04 08 13 08 56 69 72 67 S1.0...U....Virg
    00C0: 69 6E 69 61 31 10 30 0E 06 03 55 04 07 13 07 46 inia1.0...U....F
    00D0: 61 69 72 66 61 78 31 11 30 0F 06 03 55 04 0A 13 airfax1.0...U...
    00E0: 08 5A 6F 72 6B 2E 6F 72 67 31 10 30 0E 06 03 55 .Zork.org1.0...U
    00F0: 04 03 13 07 52 6F 6F 74 20 43 41 30 5C 30 0D 06 ....Root CA0\0..
    0100: 09 2A 86 48 86 F7 0D 01 01 01 05 00 03 4B 00 30 .*.H.........K.0
    0110: 48 02 41 00 E2 BD 8D E9 59 8E 07 35 2B ED 20 57 H.A.....Y..5+. W
    0120: 38 00 C8 3D 34 85 50 E2 93 A0 17 C7 98 45 F3 5F 8..=4.P......E._
    0130: CD 7B 4A DA 6E F0 C7 0F 7A 03 3E 69 A9 7C CD 15 ..J.n...z.>i....
    0140: 46 F0 D1 C8 7A 0A E9 09 DD B7 6F 5B CD 80 29 E6 F...z.....o[..).
    0150: 3A 6A 49 65 02 03 01 00 01 A3 81 B1 30 81 AE 30 :jIe........0..0
    0160: 0C 06 03 55 1D 13 04 05 30 03 01 01 FF 30 1D 06 ...U....0....0..
    0170: 03 55 1D 0E 04 16 04 14 3F A7 DF 1F FA 90 1F 98 .U......?.......
    0180: 4F BA 42 9F 21 7D B4 C4 88 76 14 DA 30 7F 06 03 O.B.!....v..0...
    0190: 55 1D 23 04 78 30 76 80 14 3F A7 DF 1F FA 90 1F U.#.x0v..?......
    01A0: 98 4F BA 42 9F 21 7D B4 C4 88 76 14 DA A1 5B A4 .O.B.!....v...[.
    01B0: 59 30 57 31 0B 30 09 06 03 55 04 06 13 02 55 53 Y0W1.0...U....US
    01C0: 31 11 30 0F 06 03 55 04 08 13 08 56 69 72 67 69 1.0...U....Virgi
    01D0: 6E 69 61 31 10 30 0E 06 03 55 04 07 13 07 46 61 nia1.0...U....Fa
    01E0: 69 72 66 61 78 31 11 30 0F 06 03 55 04 0A 13 08 irfax1.0...U....
    01F0: 5A 6F 72 6B 2E 6F 72 67 31 10 30 0E 06 03 55 04 Zork.org1.0...U.
    0200: 03 13 07 52 6F 6F 74 20 43 41 82 01 00 30 0D 06 ...Root CA...0..
    0210: 09 2A 86 48 86 F7 0D 01 01 05 05 00 03 41 00 29 .*.H.........A.)
    0220: CB D0 48 E2 89 2F 8D 4A A6 73 11 71 EB 58 9D 9E ..H../.J.s.q.X..
    0230: 0C 44 1F 87 C2 A3 3C C0 E7 9A E3 C4 BC A7 DD C4 .D....<.........
    0240: FC 52 F1 A9 72 65 14 99 C1 A7 62 61 35 91 D8 AE .R..re....ba5...
    0250: FF FB FF 82 D8 1C EE 03 02 77 03 19 6A B0 06 .........w..j..
    Thread-3, READ: TLSv1 Handshake, length = 220
    *** CertificateRequest
    Cert Types: RSA, DSS, Ephemeral DH (RSA sig),
    Cert Authorities:
    <CN=Root CA, O=Zork.org, L=Fairfax, ST=Virginia, C=US>
    <CN=Server CA, OU=Server Division, O=Zork.org, L=Fairfax, ST=Virginia, C=US>
    [read] MD5 and SHA1 hashes: len = 220
    0000: 0D 00 00 D8 03 01 02 05 00 D2 00 59 30 57 31 0B ...........Y0W1.
    0010: 30 09 06 03 55 04 06 13 02 55 53 31 11 30 0F 06 0...U....US1.0..
    0020: 03 55 04 08 13 08 56 69 72 67 69 6E 69 61 31 10 .U....Virginia1.
    0030: 30 0E 06 03 55 04 07 13 07 46 61 69 72 66 61 78 0...U....Fairfax
    0040: 31 11 30 0F 06 03 55 04 0A 13 08 5A 6F 72 6B 2E 1.0...U....Zork.
    0050: 6F 72 67 31 10 30 0E 06 03 55 04 03 13 07 52 6F org1.0...U....Ro
    0060: 6F 74 20 43 41 00 75 30 73 31 0B 30 09 06 03 55 ot CA.u0s1.0...U
    0070: 04 06 13 02 55 53 31 11 30 0F 06 03 55 04 08 13 ....US1.0...U...
    0080: 08 56 69 72 67 69 6E 69 61 31 10 30 0E 06 03 55 .Virginia1.0...U
    0090: 04 07 13 07 46 61 69 72 66 61 78 31 11 30 0F 06 ....Fairfax1.0..
    00A0: 03 55 04 0A 13 08 5A 6F 72 6B 2E 6F 72 67 31 18 .U....Zork.org1.
    00B0: 30 16 06 03 55 04 0B 13 0F 53 65 72 76 65 72 20 0...U....Server
    00C0: 44 69 76 69 73 69 6F 6E 31 12 30 10 06 03 55 04 Division1.0...U.
    00D0: 03 13 09 53 65 72 76 65 72 20 43 41 ...Server CA
    Thread-3, READ: TLSv1 Handshake, length = 4
    *** ServerHelloDone
    [read] MD5 and SHA1 hashes: len = 4
    0000: 0E 00 00 00 ....
    *** Certificate chain
    JsseJCE: Using JSSE internal implementation for cipher RSA/ECB/PKCS1Padding
    *** ClientKeyExchange, RSA PreMasterSecret, TLSv1
    Random Secret: { 3, 1, 175, 38, 47, 77, 131, 125, 209, 147, 174, 228, 183, 99, 34, 2, 100, 186, 77, 47, 65, 233, 82, 133, 183, 113, 8, 193, 51, 241, 167, 105, 4, 187, 57, 130, 161, 11, 178, 11, 134, 84, 96, 106, 203, 11, 195, 51 }
    [write] MD5 and SHA1 hashes: len = 77
    0000: 0B 00 00 03 00 00 00 10 00 00 42 00 40 39 9F EC ..........B.@9..
    0010: 5F 92 FA 3D 5E 3D 0C 19 10 72 DA BE B6 14 76 62 _..=^=...r....vb
    0020: AE 39 75 0B 74 10 C7 B1 42 D7 A1 22 C0 0E B8 A2 .9u.t...B.."....
    0030: 22 80 73 20 36 A2 FD BB F9 3E F4 F0 91 CE 95 F8 ".s 6....>......
    0040: 05 D7 22 FC 2C CF 1B AB 19 82 03 D2 F5 ..".,........
    Thread-3, WRITE: TLSv1 Handshake, length = 77
    SESSION KEYGEN:
    PreMaster Secret:
    0000: 03 01 AF 26 2F 4D 83 7D D1 93 AE E4 B7 63 22 02 ...&/M.......c".
    0010: 64 BA 4D 2F 41 E9 52 85 B7 71 08 C1 33 F1 A7 69 d.M/A.R..q..3..i
    0020: 04 BB 39 82 A1 0B B2 0B 86 54 60 6A CB 0B C3 33 ..9......T`j...3
    CONNECTION KEYGEN:
    Client Nonce:
    0000: 40 CA 22 D1 CD D3 81 EA 58 81 98 B0 DF B4 A1 8A @.".....X.......
    0010: F6 B7 B5 59 3D FC 3F 23 15 22 FD 20 FE 7C 26 C6 ...Y=.?#.". ..&.
    Server Nonce:
    0000: 40 CA 22 D3 51 6A 52 2D E9 E2 59 06 26 F0 47 7A @.".QjR-..Y.&.Gz
    0010: 5A E2 FF CF 09 66 CD 7F DF D3 04 54 4F 10 65 59 Z....f.....TO.eY
    Master Secret:
    0000: 67 B9 58 74 69 18 0B 2E 00 EB AC 9B 77 15 B4 65 g.Xti.......w..e
    0010: 61 A1 AC D0 F1 D5 4C CA 0E 51 FC 58 A0 11 B7 87 a.....L..Q.X....
    0020: EC 72 26 D0 83 18 27 49 8F B6 32 FF E3 89 1D E4 .r&...'I..2.....
    Client MAC write Secret:
    0000: D5 96 AB F7 1E 46 5F 46 8A E9 3E DF A0 5E 32 5E .....F_F..>..^2^
    0010: 00 FB B8 D8 ....
    Server MAC write Secret:
    0000: E6 7D 8E F5 6A 4C 94 4C D6 2A 3A 4D FC C1 94 A3 ....jL.L.*:M....
    0010: C5 6C 5F B6 .l_.
    Client write key:
    0000: 18 1D 51 8C 74 6D 18 57 ..Q.tm.W
    Server write key:
    0000: 0D 4E 7A F1 5A D6 5F 5B .Nz.Z._[
    Client write IV:
    0000: 4C BB 4D FA 4F EB CB 4E L.M.O..N
    Server write IV:
    0000: B7 6A CA E9 66 7D 25 88 .j..f.%.
    Thread-3, WRITE: TLSv1 Change Cipher Spec, length = 1
    JsseJCE: Using JSSE internal implementation for cipher DES/CBC/NoPadding
    *** Finished
    verify_data: { 20, 20, 38, 13, 43, 235, 102, 72, 75, 212, 21, 21 }
    [write] MD5 and SHA1 hashes: len = 16
    0000: 14 00 00 0C 14 14 26 0D 2B EB 66 48 4B D4 15 15 ......&.+.fHK...
    Padded plaintext before ENCRYPTION: len = 40
    0000: 14 00 00 0C 14 14 26 0D 2B EB 66 48 4B D4 15 15 ......&.+.fHK...
    0010: 90 9C E9 09 F4 48 96 A6 8F AA 04 DF E9 36 72 F0 .....H.......6r.
    0020: 42 F0 60 78 03 03 03 03 B.`x....
    Thread-3, WRITE: TLSv1 Handshake, length = 40
    Thread-3, READ: TLSv1 Alert, length = 2
    Thread-3, RECV TLSv1 ALERT: fatal, handshake_failure
    Thread-3, called closeSocket()
    Thread-3, handling exception: javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
    Finalizer, called close()
    Finalizer, called closeInternal(true)
    So I'll toil away trying to get *right* combination of settings - please let me know if you have any ideas! FYI here are the command line settings I am using for the keystore:
    -Djavax.net.ssl.keyStore=c:\myClientIdKeyStore -Djavax.net.ssl.keyStoreType=jks -Djavax.net.ssl.keyStorePassword=myClientIdKeyStorePass
    Thanks,
    Paul

  • How can i control when my animation starts/stops with external JS

    I am making a web app that will allow you to go through "pages" by clicking and dragging or sliding your finger (touch devices).
    I am wanting to make a seperate animation on Edge for each page and play it when the current page is on witht the relevant edge comp.
    So far my code allows me to know what page is being viewed and that the animation should be played, however I can not figure out how to play the comp.
    ie.
    WHEN page = 1, play composition "page1".
         If currentPage is not currentPage, stop composition "page 1".
    Please could you help me as I've been racking my brain all day to figure this out.

    Hi,
    You'll find a tutoriel here.
    Then, example #1 and example #2.

  • Which is the best structure for start/stop data logging?

    Hi everybody,
    hope I can explain my problem good enough that anyone can help me:
    I have a VI which continuely shows on a graph the voltage of a Analog Input of a DAQ device. Now I want to allow the user to start/stop with a click on a button data logging. Means that a second loop writes to a selected path every ms the data to a spreadsheet file.
    At the moment my VI works like this:
    You run the VI and Labview asks you one time for the file path, then you can start and stop the data logging. But you can do it only one time. If you want to log a certain time later another file, you have to close and open the whole VI again which is not very professional...
    My target is:
    It is onlyl necessary to start the VI one time. Then you can select a new file path, log data, select another file path, logging data again....and so on...
    Which programm structure is necessary, can anyone help me as a labview beginner with that issue? I attached the VI if someone just wants to edit that...
    Thank you for your help!! Markus
    Attachments:
    Logging voltage.vi ‏93 KB
    screenshot.JPG ‏98 KB

    @NaruF1 and GerdW
    you are right, there is a mistake, both loop rates should be the same (10 ms) :-)
    @NaruF1
    yes you understood correctly that the file dialog should appear every time the user wants to start writing a new log-file. The voltage we measure is a analog signal, so there will be several interesting periods we want to save for a later analysis in Excel.
    To your 2nd point: if it works with a array it will be fine. But it must be possible to log data for lets say 5 minutes, so the array won´t be too large? (5 min @ 10  ms loop rate will be 30000 rows..
    attached is the VI, saved as LV2009..
    Thanx a lot!
    @GerdW
    ..you ask why I didn´t create a structure like you recommended with notifiers or queues? The simple answer would be that I am not familiar with all this.. just began to write my first Labview programm. I will have al look to the LV help with all that stuff... Thank you a lot
    Attachments:
    Logging voltage.vi ‏80 KB

  • What means the nomber of starts/stops?

    I bought my ipod classic about a couple of weeks ago. I bought it in a shop, so it was new. But on the second day of using i have done the S.M.A.R.T disk test and it showed the 32 nomber of reallocs. I decided, that it's a kind of a software mistake, becouse it works very good. But there is another problem - hard drive has 1253 start/stops with just 11 poweron hours. all smartData looks like this
    retracts:0
    reallocs:32
    Pending sectors:0
    start/stops:1253
    Temp: current 25C
    Temp: min 20C
    Temp: max 52C
    Please tell me how bad is it and what can I do with this?

    !http://i46.tinypic.com/2nvn6f.gif!
    Check out the following thread............
    http://discussions.apple.com/thread.jspa?threadID=2396328&tstart=0
    !http://i50.tinypic.com/izvwo1.gif!

  • Firefox start with two pages. One says welcome to Firefox etc. And the other is my homepage (google). I want to stop the first page. How can I do this??

    Firofx (5.0) starts with two pages. One is the welcome to Firofox and also that there are Add-ons available. The other one is my homepage (google). I want to stop the first page. How can I do this?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • PCI6601 - Start and Stop of all 4 counters individually in LabView 5.0

    Hi!
    I work with the PCI6601 card and I want to start and stop each of the 4 counters independent from the others.
    To start only one counter is quite easy, but two or more won't work.
    I have 4 external devices and want to know the counts of each device that means there are four sources.
    The Vi's in LabView 5.0 supports only the AM9513/8254/and the DAQ-STC. Perhaps there is no possibility to work with all features of the 6601 in LV5.0.
    I tried it with the counter list and with group# and the listed counters started with the internal frequency. But this is not what I want.
    Please give me some hints to "rescue the next nights".
    Thanks for your answers!
    Markus

    A couple comments that will hopefully let you sleep well tonight...
    1. If possible, use the counter functions whose icon show a "CTR" in the lower right rather than a "123". Do you have these in LV 5.0? I know they were available by 5.1.1, but am not certain about 5.0
    2. The 6601 doesn't support multiple counters in a group. To program 4 counters requires 4 config chains with 4 separate calls to "Counter Group Config". Note that each call must input a unique group #.
    You'll end up with 4 unique task id's which you can then start & stop independently of the others.
    -Kevin P.

  • "Accounting-Start" and "Accounting-Stop" with same "user name" and "session Id" recorded in different RADIUS servers.

    Hi,
    I have questions about "Accounting-Start" and "Accounting-Stop".
    1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
    2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
    To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it  an issue for RADIUS application ?
    Cheers,
    1.If a NAS configured to have a primary and a backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the primary server goes down (Primary server won’t tell the NAS?). When sessions stop, the NAS sends the “Accounting-Stop” to the secondary. I understand the “Start-Stop” record with the same “user name” and “session-id” ideally should be recorded in the same server. If this situation happens what should both the NAS and RADIUS server do?
    2.A NAS configured to have a primary and backup RADIUS server. To start with all the “Accounting-Start” records will be in the primary RADIUS server. Later on the administrator decided to change the primary server (as there are problems with the previous primary). sessions stop, the NAS sends the “Accounting-Stop” to the new primary. This ends up the “Accounting-Start” and “Accounting-Stop” with the same “user name” and “session Id” in two RADIUS servers.
    To summarize, how to avoid the ”start-stop” pair ends up in different servers ? If it does, is it  an issue for RADIUS application ?
    Cheers,

    vignesh and BalusC,
    following is the code in front controller's doFilter method. is this not thread safe?
            HttpServletRequest req = (HttpServletRequest) request;
            HttpServletResponse res = (HttpServletResponse) response;
            HttpSession session = req.getSession();
            somepackage.User user;
            if(session.getAttribute("user") == null){
                user = new somepackage.User();
                session.setAttribute("user", user);
            }else{           
                user = (somepackage.User) session.getAttribute("user");
            }user object maintains all information about a user. if it is in session scope, everything should work fine.
    another observation is after some time of usage, both people in different systems are getting same session.getId()
    in my logout page i am using
    session.invalidate();
    thanks,
    moses

  • Book Module: Export to PDF and Blurb stops with error at two page spread

    I have a 66 page book created in the book module..
    When exporting to PDF the export stops with the error:
    "An error occurred while saving the book.
    There was an error creating the PDF file. "
    The same occurs (at the same book page) when exporting to BLURB
    "An error occurred while creating the book."
    The creation or export always stops at the same page which is a two page spread. Interestingly there is a two-page spread before that didn't throw an error. I tried to move the problem page to the end of the book. That didn't help because the next two page spread in the book throws an error.
    Any ideas or help?
    Lightroom version: 4.0
    Computer: Windows 7, Quadcore, 8 GB RAM

    Hi, sorry I do not have a solution but I too have a very similar issue in that the book is the same size but the export to PDF does not start at all
    I have tried reducing the image dpi settings. Jpg quality and still nothing
    The only success I have had is if I duplicate the book, delete all but 8 pages and then export at full dpi settings of 300 and 100 percent jpg quality
    Any more pages and nothing
    It's a great tool and would buy it if this feature actually worked. Oh yeah I only have the trial version at the minute to give it a good thorough test
    I have looked for solutions but like your query they are all unanswered
    Does adobe actually offer any support or is this all user solutions?
    Did you find a solution by the way?

  • Problems with DV Start/Stop detect with XL1s

    Hello,
    As the topic eludes to, I capture footage with a Canon XL1s (which I hate more and more with each passing day). This footage is then input through a Firewire 400(mini) to 800. When I select the footage in FCE, and select DV Start/Stop detect, a moment passes (where a load bar calculates), but then a small info box says the following:
    *This movie does not have any breaks in the time/date information. No markers were added.*
    What's strange is that I've got another clip that does creates two subclips - however - there should be more along the lines of 80 subclips. In fact, all the clips I'm trying to use DV Start/Stop Detect on have anywhere from 50 to 150 shots in each...
    Anyone know why FCE isn't detecting the start/stops, and - furthermore - if there is anything else I can utilize to accomplish this?
    Thank you.

    Are you saying that because the clock settings were not set while recording, FCE cannot detect the DV >start/stops?
    Yup.
    You can add markers manually and then make sub-clips if you wish to break up a large clip .
    Al

  • I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation."  I am the sole user- please help.

    I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

    I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

    <http://support.apple.com/kb/HT6337>
    "To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

  • Hi! when starting my computer the background went gray with two hard drives in the middle. One is named macintosh HD and the other recovery 10.9. I have my whole life on my computer, and i don't know which of them i should start up? Please i need help!

    Hey!
    when starting my computer the screen is gray with two harddrives. One is named Macintosh HD and the other Recovery 10.9. My computer has never done this before! I am really worrid that my files will be lost if i choose to start the wrong harddrive. Which one should i choose? HELP!!

    You probably held down the Option or Command R keys when you heard the startup tone. Simply choose the HD. To learn what the Recovery partition is please read OS X: About OS X Recovery

  • I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

    Good work, thanks for the report.

Maybe you are looking for

  • Adding Forwarding Agent to Partner details in a Sales Order.

    Hi Experts,   Below is the detailed scenario :   We have inbound orders been created by Idocs Orders04 using the Idoc_Input_orders function module. the requirement is that if the partner forwarding agent is not been populated in Idoc then we need to

  • Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0

    Hi All, I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps: 1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the

  • Desktop icons disappear (and don't return) if switch halfway to a new desktop.

    If I only swipe halfway to a new desktop (using the trackpad) and then let go to return to the original, my desktop icons disappear. To get them back i have to either killall finder, or switch to another desktop then switch back.

  • Does xqj suport sort(order by )function

    hi Geoff I just use xqj to do some test.But I face some problems.Can u give me some advices. Indeed I want to sort a xml file like sql did by order by,and I read the xquery Specification and I know it suports this fuction.But it seems that xqj does n

  • Why am I unable to log in to iMessage on my new iPhone 5?

    "After updating my Apple ID info. FaceTime & iMessage logged out of my Apple ID account on both my iPad and iPhone and are not logging back using the same Apple ID claiming that my user name or password was incorrect?! Surprisingly, it's logged in on