Start Tx Iview from URL works only in current IE Window.

Hello,
We would like to send an URL via e-mail to link directly the user to a given SAP transaction (IW33), prefilled with the work order number.
The users are always logged on and authentified against the SAP Portal.
From the Portal window, I start a new IE window (CTRL+N) and paste the URL it works fine. But If I open a brand new IE window from the windows start menu, it doesn't work. Any Clue.
Here is the URL I use:
https://<portalserver>.<companydomain>.com:50101/irj/servlet/prt/portal/prtroot/com.sap.portal.appintegrator.sap.Transaction?System=SAP_R3&GuiType=WinGui&WinGui_Type=Shortcut&TCode=*IW33%20CAUFVD-AUFNR=000053071319;DYNP_OKCODE=/08

The error is the following
Portal Execution Error
Exception id: 02:51_16/12/08_0012_13576551
See the details for the exception ID in the log file.
and the details from the defaultTrace.2.trc file:
#1.#528C8000E0020027000000050004007800045E2F47AADBBB#1229457065696#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#Guest#0##n/a##e02d58d0cbaa11dda442528c8000e002#SAPEngine_Application_Thread[impl:3]_11##0#0#Error##Java###02:51_16/12/08_0012_13576551
[EXCEPTION]
#1#com.sapportals.portal.pcd.gl.PermissionControlException: Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/low_safety/com.sap.portal.appintegrator.sap/components/Transaction)
        at com.sapportals.portal.pcd.gl.PcdFilterContext.filterLookup(PcdFilterContext.java:422)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1248)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.basicContextLookup(PcdProxyContext.java:1254)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookupLink(PcdProxyContext.java:1353)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.proxyLookup(PcdProxyContext.java:1300)
        at com.sapportals.portal.pcd.gl.PcdProxyContext.lookup(PcdProxyContext.java:1067)
        at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:68)
        at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
        at javax.naming.InitialContext.lookup(InitialContext.java:361)
        at com.sapportals.portal.prt.deployment.DeploymentManager.checkPermissions(DeploymentManager.java:2000)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:251)
        at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:316)
        at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:387)
        at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:488)
        at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
        at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
        at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
        at java.security.AccessController.doPrivileged(AccessController.java:246)
        at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:219)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Similar Messages

Start an iView from a WAD?

Hello to you all,
I have a question.
Is it possible to start an IView from a WAD Application by pressing a button?
Regards
Jörg

Hi Jörg,
You can call a VIEW, pressing a button. However, this is not a standard SAP functionality.
Well, you have to create a HTML code.
I'm creating an example:
Put this on your WAD code after
Of course, on the parenthesis ( ), you have to remove and put the value required. Remove the parenthesis, as well.
This will create a button on the top of your template.
Click on this button and the VIEW selected on ACTION url will be called.
This is the only way I know. I've tested on my system and works.
I hope you find this information useful...
Best Regards,
Edward John

How do I keep a page as my home page when dragging icon to left of URL to house image & confirming that I want it as home page works only for current session, so when Firefox next opened, I end up with some stupid search page which McAfee doesn't like?

A couple of days ago, I connected to the Internet as usual & opened Firefox, only to be greeted by an almost blank screen with a Google-type search box in the middle & this message from McAfee:
"Your default search settings have changed. This may pose a security risk. Would you like to restore them to McAfee Secure Search to provide a safer searching experience?"
instead of my usual home page (BT Yahoo). I naturally clicked on the "Yes" option in the message, but rather than restoring my BT Yahoo home page, all that did was to insert the McAfee logo to the left of the search box in the top right-hand corner of the screen. The first time it happened, I had to search for the BT Yahoo page & then followed the standard procedure for setting it again as my home page. It worked only for that session: each time I shut down Firefox or restarted my computer after that, all I got was the blank "search page" & restoring the previous session was the only way to get back to BY Yahoo. How on earth do I make the home page setting permanent?
As far as I'm aware, I have done nothing to alter my search settings. However, I am anything but computer-literate, so I may have done/pressed something without realising it, but trying to understand what is now happening is far beyond my limited IT skills.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

Won't start OS X from regular account; only secondary account...

Let me try to rephrase my question...the only way my G4 will start is in safe boot; it will not start OSX from my regular account, only from a second account I created some time ago. Can anyone help at all?

Hey man--thanks for responding. You know what--I wound up reinstalling OS X, and it solved the problem. Not sure at this point what was going on, but the PB runs like new again. FYI--I also trashed a music sharing software that, well, we won't name names but it starts with a well-known member of the citrus family...we sometimes put them into our Coronas...anyway, this software had embedded itself deeply into my computer. I HAD noticed that this sharing software ran differently than anything else; left on it's own, it would just run and run all the time; and it was time consuming to quit the application entirely. Took awhile to get it out of the computer; without spotlight, I could not have done it. Anyway, all's well that ends well. 'Preciate more than you know you're responding and trying to help. --Regards, Mark

Call iView from URL

Dear Expert,
I have create an iView contains BSP Page.
I want to call it by defining URL to the perspective iView.
I've add this link but still can't access the BSP Page on e-Portal
http://xxx.xxx.com/irj/portal?navigationtarget=roles://portal_content/FLD.ObjetLibrary/FLD.Roles/FLD.CRM/ROL.ALL_MillHead/FLD.Z_EP_ACCT_MANAGEMENT/FLD.ACCT_MANAGEMENT/IVU.CRM.ZCRM_SRV_001
This information, I got from iView PCD
portal_content/FLD.ObjetLibrary/FLD.Roles/FLD.CRM/ROL.ALL_MillHead/FLD.Z_EP_ACCT_MANAGEMENT/FLD.ACCT_MANAGEMENT/IVU.CRM.ZCRM_SRV_001
How to define the URL link so user can access directly to the iView in e-Portal?
Need your help experts...
BR,
Robin

Hello,
after NavigationTarget=ROLES://
try replacing the slashes for !2f and colon for !3a
/ = !2f
: = !3a
if you still get errors try the following URL:
~~/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2f~~~~
regards,
Rafael

Executable from vi works only on PC's with LV

I have a vi that communicate with the Printerport as digital output. It works very good, so I make a executable from it (with the last version of app.builder)and it still works very good, but if I run this exe on a PC without Labview (but with the runtime engine for LV7.1) it doesn't work anymore (nothing on the PP)and no messages or errors.
Attachments:
VMCA.exe ‏145 KB
cviVXDWrapper.dll ‏265 KB

I can't open your VI because I don't have 7.1 yet but if you are using the Port I/O functions, did you include support for them when you created your installer? You have to click the Advanced button on the Installer Settings tab and check the box Port I/O Support.

Unable to start obiee services from "Services"

I am not able to start obiee services from services.msc on my local. (Windows XP)
I get the following error while trying to start Oracle BI Java Host:
The Oracle BI Java Host service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts service.
Error while starting Oracle BI Presentation Service:
Windows could not start the Oracle BI Presentation Service on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code -1.
Error Description from System Event Log:
The Oracle BI Presentation Server service terminated with service-specific error 4294967295 (0xFFFFFFFF).
Error while starting Oracle BI Server:
Could not start the Oracle BI Server service on Local Computer.
Error 1067: The process terminated unexpectedly.
Can somebody please help me with this.
Thanks,
Swetha

Hi,
Regarding the Java Service have you installed the Java JDK (can be found here ) in a directory that contains no spaces?
Installing it in Program Files will cause issues so perhaps reinstall it into a location like C:/Java/jdk1.6/
After installing it to the new location you will need to update the instanceconfig.xml file (mine is located C:\OracleBIData\web\config\instanceconfig.xml).
Change the location of the Java Home between these tags to the root of your newly installed Java sdk. eg <JavaHome>C:/Java/jdk1.6</JavaHome>
Try launching the service again.
Let me know if this works or doesn't,
J
Edited by: J Kremer on 05-Apr-2011 00:18

NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working

Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.".   Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
      Application Host: myr3.mydomain.com
      SAP Client: 600
      SAP System ID:   DEV
      SAP System Number: 00
      Server Port: <leave it blank>
      System Type: SAP_R3
      Logon Method: UIDPW
      User Mapping Type: admin,user
      ICM Host: myr3.mydomain.com:8000
      ICM Protocol: http
      ICM URL prefix: <leave it blank>
      SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM

Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful

"Create links from URLs" preference no longer working in sticky notes

I work with reading other people's sticky notes in Adobe Acrobat X Pro (now version 10.1.1). When they wrote URLs in the sticky notes it used to recognize them as links; now they're just plain text. My Preferences > General > "Create links from URLs" option is checked ON. I aso tried View > Tools > Document Processing > "create Links from URLs" and it added two links but only outside of the sticky notes. I am on Windows 7 Professional 64-bit. Thanks.

AFAIK, URLs inside annotations were never converted into actual links. I'm not even sure it's technically possible to do so.
It might have happened if the annotations were flattened and the text in them became a part of the static text of the PDF. Then the URLs in it could have been converted into "live" links, but not before.

"Place video from URL" not working in InDesign CC 9.1

Has anyone come across why an H.264 encoded mp4 file won't embed into InDesign CC, but will in CS6? Last week I upgraded from Indesign 9.0 (where it was working) to Indesign 9.1 (where it no longer works). Specifically, I'm using the "Place video from URL" option.
* I've tried several different servers to host the mp4 file (the servers do work). The mp4 URLs on each server do work in a browser, but not in Indesign CC.
* I've tried placing the mp4 URL in CS6 and that works fine.
* I've tried a coworker's Indesign CC, that didn't work.
* I've tried making a brand new file in Indesign CC, that didn't work.
I'm running InDesign 9.1 on Mac OS 10.8.5. It looks like Indesign 9.1 broke the "Place video from URL" Does anybody have a fix?
matt

Salah, thank you for the suggestion. However, when trying to paste the embed code into the "Place video from URL" field gets the following error, "The URL must start with 'http://' or 'rtmp://' and must end with a valid file extension."
Using the embed code never worked with Indesign--even before I was having the problems with the URL placement.

Each time I try to start iTunes after it was closed, it wouldn't start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong?

Each time I try to start iTunes after it was closed, it wouldn’t start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong

Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!

Url Iview from SAP Portal to Infoview encounters "Access is denied"

Hi
We are using URL Iview to point to Business Objects Infoview from SAP Portal. Our requirement is to launch the Infoview within the portal content area. We are able to preview the iview, but encounter "Access is denied" error when we add the iview to page, we realised that we are only able to launch infoview when it is setup to open in a new window.
Is there a way where we can show the Infoview in portal content frame.
Regards
Kamal

Hi experts,
i got the same problem how to integrate the InfoView Appl into the "Portal Content Area" and not only as an new Window.
When i try to analyse the problems, the error stacks say some thin about that an Java Script is trying to change the browser size and the portal is not allowing this... thats my assumptions.
Has anybody how we could solve this tricky topic ?
For details to to customize the URL iView please refer to this thread: Integration of InfoView into SAP Portal using SSO
kind regards
Stefan

EM DB console works only from one node?

In my 2 node RAC the enterprise manager database console works only from one node i.e the url shows login page only from one node.
http://NODE2:5500/em------>WORKS, SHOWS LOGIN PAGE AND CAN MANAGE ALL INSTANCES FROM HERE
http://NODE1:5500/em------>DOES NOT WORK, DOES NOT SHOW THE LOGIN PAGE.
Please clarify.
Kadhim

I have to guess ... (because you tell neither OS nor database version). Assuming it's 10gR2 or higher, that's expected behaviour, dbconsole runs on one node only, the so-called master node. You can change that, see the documentation or this metalink note:
How to manage DB Control 10.2 for RAC Database with emca
Doc ID: NOTE:395162.1
Werner

Launch Adobe Flex iView from Specific URL

I was wondering if there was a way to launch a BSP iView from a direct URL, rather than having to log in to the portal and navigate to the iView. For example, if I create an Adobe Flex application called SamplePortal, I want users to be able to click on and bookmark a link that takes them directly to the application, while still taking advantage of the NetWeaver user authentication.
I see 2 options available:
1. Create a Quick Link (http://<servername>:50000/irj/portal/SamplePortal) - I can;t seem to get this one to work
2. Directly Access the iView (http://<servername>:50000/irj/servlet/prt/portal/prtroot/pcd!3?&NavigationTarget=SamplePortal) - I also can't seem to get this method to work
Which is best?

1. QuickLink option
You can assign a value to the quick link property of an iView or a Page and then you can navigate to that quick link using a direct URL like:
http://myServer:50000/irj/portal/myQuickLink
However, the iview/page should be assigned to the user via a Role assignment for it to work.
http://help.sap.com/saphelp_nw04s/helpdata/en/97/b0ef8b24a64ae884f0ab246e54cae5/content.htm
2. Navigation Target
The navigation target specifies the location of an iView or a page in the current user role. The target can be obtained from the portal catalog as a value that is concatenated by folder id s, roles or other objects.
http://myportal.wdf.sap.com:8100/irj/index.htm ?
NavigationTarget=ROLES%3A//portal_content/MyRole/MyRole/MyTest/MyIView
You should be mentioning the PCD path in your Navigation Target.
http://help.sap.com/saphelp_nw70/helpdata/en/18/3fb84033a8b533e10000000a155106/content.htm
Thanks,
Shanti

Passing parameters from URL to multiple iViews on a page.

Hi Everyone,
Could you please point me to a guide or howto, which explains on passing parameters from URL to multiple iViews on a page. I already know how to pass parameters from URL to a single iView (wiki).
Thanks!
Indy

Hi Indy,
Currently, passing parameters to the page which contains VC iViews is not supported, only directly in the iView's URL.
Regards,
Natty

Start Tx Iview from URL works only in current IE Window.

Similar Messages

Maybe you are looking for