Starting OCFS2 cluster fails

Hi All,
Trying to start cluster fails with:
[root@odlx01 init.d]# ./o2cb start raccls
Starting cluster raccls: Failed
Cluster raccls created
o2cb_ctl: Internal logic failure while adding node odlx01
Stopping cluster raccls: OK
OCFS2 is installed on a RedHat server:
Linux odlx01 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux
The cluster.conf contains this:
node:
ip_port = 7777
ip_address = 10.91.3.2
number = 0
name = odlx01
cluster = raccls
cluster:
node_count = 1
name = raccls
Any ideas as to what is wrong, or where I could look to get a more detailed explanation of the error?
Thanks
Gary

How are you starting the managed servers. try running the command
from /MW_HOME/user_projects/domains/bifoundation_domain/bin
nohup sh ./startManagedWebLogic.sh bi_server1 http://localhost:7001> start_bi_server1.log &
and see how it goes. make sure you have set the boot.properties files under security folder so that it wont get failed looking for username and password.
hope it helps

Similar Messages

Start managed server in a cluster fail

Hi,
I'm new in Oracle Weblogic, and I'm testing Weblogic 10.3.
I setup multiple IP in my laptop as follows:
10.0.0.183 devpc
10.0.2.183 node1
10.0.3.183 node2
And I configured a domain with Configuration Wizard as follows:
AdminServer
Listen Address:10.0.0.183
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.2.183
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:10.0.3.183
Listen Port:7001
When I started ManagedServer_1 with the command "*startManagedWebLogic.cmd ManagedServer_1 http://10.0.0.183:7001*",
managed server started to RUNNING state successfully, and after few seconds, I got these error.
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000365> <Server state changed to RUNNING>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <Main Thread> <<WLS Kernel>> <> <> <1239098617688> <BEA-000360> <Server started in RUNNING mode>+
+<Info> <J2EE> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098617703> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>+
+<Error> <Cluster> <devpc> <ManagedServer_1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-000170> <Server ManagedServer_1 did not receive the multicast packets that were sent by itself>+
+<Critical> <Health> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635062> <BEA-310006> <Critical Subsystem Cluster has failed. Setting server state to FAILED. Reason: Unable to receive self generated multicast messages>+
+<Critical> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000385> <Server health failed. Reason: health of critical service 'Cluster' failed>+
+<Notice> <WebLogicServer> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635078> <BEA-000365> <Server state changed to FAILED>+
+<Error> <> <devpc> <ManagedServer_1> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239098635234> <BEA-000000> <+
+===== FULL THREAD DUMP ===============+
Tue Apr 07 18:03:55 2009
BEA JRockit(R) R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32
+"Main Thread" id=1 idx=0x4 tid=2208 prio=5 alive, in native, waiting+
+-- Waiting for notification on: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at jrockit/vm/Threads.waitForNotifySignal(JLjava/lang/Object;)Z(Native Method)
at java/lang/Object.wait(J)V(Native Method)
at java/lang/Object.wait(Object.java:485)
at weblogic/t3/srvr/T3Srvr.waitForDeath(T3Srvr.java:811)
+^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr@0x09E9E9E8[fat lock]+
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:459)
at weblogic/Server.main(Server.java:67)
at jrockit/vm/RNI.c2java(IIIII)V(Native Method)
-- end of trace
+.+
+.+
+.+
How to fix it?
Thanks in advance.

Hi,
I changed the settings as follows:
AdminServer
Listen Address:devpc
Listen Port:7001
ManagedServer_1
Machine:(none)
Cluster:Cluster_1
Listen Address:node1
Listen Port:7001
ManagedServer_2
Machine:(none)
Cluster:Cluster_1
Listen Address:node2
Listen Port:7001
Cluster_1
Cluster Address:node1:7001,node2:7001
The exceptions still remained, any suggestions would be appreciated.

Unable to start ocfs2

Hi
I have configured the nodes for ocfs2. I am encountering the following error when trying to enable OCFS2 to start at system boot: :
[root@rac1 oracle]# /etc/init.d/o2cb enable
Writing O2CB configuration: OK
Starting O2CB cluster ocfs2: Failed
Cluster ocfs2 created
Node rac1.oracle.com added
Node rac2.oracle.com added
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration matches this machine's host name.
Stopping O2CB cluster ocfs2: OK
Can anyone kindly advice what could be wrong please?
Thanks in advance!
Message was edited by:
user553646

What is the contents of /etc/ocfs2/cluster.conf on BOTH nodes?
Make sure the entries in this file has the actual hostname of the servers with the ip address of your private interconnect.
Then copy it around your cluster.
It certainly sounds like this file is setup wrong.

Having issue with start weblogic cluster with tangosol cluster

Hi,
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
We are using Weblogic 8.1.5 with Tangosol 3.3.1 on Linux servers.
And we added the initializing logic in the servlet's init() method to get all NamedCaches and put into the ServletContext.
When we start weblogic cluster, the first weblogic member will startup successfully with following messages :
<Nov 7, 2007 10:12:30 AM EST> <Info> <HTTP> <BEA-101047> <[2007-11-07 10ServletContext(id=259640596,name=clusterqa,context-path=)] initObjects: init>:12:31.565 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational configuration from resource "zip:/home/server/clusterqa/wls81/DOCVIEW/docqa1/.wlnotdelete/extract/docqa1_DOC_clusterqa/jarfiles/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
2007-11-07 10:12:31.598 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational overrides from file "/home/www/WEB-INF/lib/tangosol-coherence-override.xml"
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
Copyright (c) 2000-2007 Oracle. All rights reserved.
2007-11-07 10:12:31.938 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from file "/home/www/WEB-INF/lib/pub-search-cache-config.xml"
2007-11-07 10:12:31.983 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): sun.misc.AtomicLong is not supported on this JVM; using a synchronized counter. Though safe to ignore, you may upgrade to BEA's 1.5 JVM to fix this issue.
2007-11-07 10:12:33.267 Oracle Coherence GE 3.3.1/389p1 <Warning> (thread=Main Thread, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2007-11-07 10:12:34.118 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2007-11-07 10:12:37.508 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Created a new cluster with Member(Id=1, Timestamp=2007-11-07 10:12:33.323, Address=10.5.176.86:8088, MachineId=48982, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2) UID=0x0A05B056000001161AAB782BBF561F98
2007-11-07 10:12:37.736 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2007-11-07 10:12:38.168 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=DistributedCache, member=1): Service DistributedCache joined the cluster with senior service member 1
<Nov 7, 2007 10:12:38 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=259640596,name=clusterqa,context-path=)] xslProcessor: init>
But trying to start the second weblogic member server, the startup process is stucked after tangosol cache initialization and the second weblogic member server never up running. Please see following messages :
<Nov 7, 2007 9:49:38 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=153019550,name=clusterqa,context-path=)] initDSNames: init>
<Nov 7, 2007 9:49:42 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=153019550,name=clusterqa,context-path=)] initObjects: init>
2007-11-07 09:49:43.156 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational configuration from resource "zip:/home/server/clusterqa/wls81/DOCVIEW/docqa2/.wlnotdelete/extract/docqa2_DOC_clusterqa/jarfiles/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
2007-11-07 09:49:43.188 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational overrides from file "/home/www/WEB-INF/lib/tangosol-coherence-override.xml"
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
Copyright (c) 2000-2007 Oracle. All rights reserved.
2007-11-07 09:49:43.528 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from file "/home/www/WEB-INF/lib/pub-search-cache-config.xml"
2007-11-07 09:49:43.571 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): sun.misc.AtomicLong is not supported on this JVM; using a synchronized counter. Though safe to ignore, you may upgrade to BEA's 1.5 JVM to fix this issue.
2007-11-07 09:49:44.829 Oracle Coherence GE 3.3.1/389p1 <Warning> (thread=Main Thread, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2007-11-07 09:49:45.419 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2007-11-07 09:49:45.555 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=47
2007-11-07 09:49:45.555 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 19
2007-11-07 09:49:46.040 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2007-11-07 09:49:45.69, Address=10.5.176.85:8088, MachineId=48981, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2) joined cluster with senior Member(Id=1, Timestamp=2007-11-07 09:45:10.205, Address=10.5.176.86:8088, MachineId=48982, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2)
Could you please explain why it happens, and what should I do to resolve this issues ?
Many Thanks,
Bing

Hi, Gene
Thank you for the response. I will send you our full log files and thread dumps.
I just want to give you more details about our cases :
1. This only happened without starting cache servers (com.tangosol.net.DefaultCacheServer).
2. And our application which are running on weblogic cluster will just call "CacheFactory.getCache("XXX")", and running as the Tangosol DataClient.
3. All weblogic member servers will be up running successfully if our cache servers are up running.
Also I tried to test another case :
Suppose all weblogic instances and cache server instances are up running. Now I trying to restart (kill weblogic instance process and restart) one of the weblogic member, It will up running successfully only if add some sleep times after killing weblogic processes and restarting it. Looks like tangosol cluster need certain time to aware the member has left cluster, then the restart process will be successful.
Questions :
1. Should we start our weblogic cluster only after cache server cluster is up running ?
2. How do we decide how many time we should wait before start new process to join the cache cluster ?
Could you please help to explain this one for me and let us if there anyway we can do to avoid the problem.
Many Thanks !!!
Bing

Ocfs2 config failed! = Exception: Obsolete nodes found

Hi,
I try to add a new node to a POOL and it failed with this error
ovs_operation.log:
"2011-07-27 09:40:36" ERROR=> cluster_check_prerequisite: faild. => <Exception: ha_check_ocfs2_config
failed:<Exception: check srv('ovm-rac-exp01') ocfs2 config failed! => <Exception: Obsolete nodes found: >
What is the problem ?
My host file and cluster.conf seem to be correct!
Thanks

Ok finaly my problem was with host file !
I have removed 127.0.0.1 localhost.localdomain localhost from my host file and now I'm able to add a new node.
hope this can help someone

Start up script fails; Unable to boot...Please, Help.

This is my first major problem that I have had with this computer. It has been running fine until this past Sunday night. I was running AOL, Firefox & iTunes. The computer was running slow and iTunes was skipping frequently. I rebooted and resumed my activities only to have the same problems and the computer booted slower than usual. I closed all my applications and rebooted once again. Then, I ran Disk Utility had used Verify Disk. It found an error on my system volume stating an incorrect block count in one sector and referenced a file cache_003, all other volumes passed. Disk Utility was unable to repair the volume. Repair Disk ran slow. I did a search for the file cache_003 and discovered that it was part of a Netscape profile back up on a different partition. I deleted the profile and used Disk Utility again. This time, the system volume passed and a different volume failed due to incorrect block size, Repair Disk failed. The next time I tried to boot the computer the gray screen with apple and loading indicator came up and stayed for several minutes followed by a blue screen with loading indicator for several minutes and stayed blue for nearly 40 minutes. Eventually, the screen went black and displayed that the start up script failed. Here is some of what was displayed.
Darwin/BSD(Computer Name-Computer.local)(console)
System Starter[35]
login date&time Internet Sharing[96]:Libinfo[Socket_open():2318]connect():2318]connect:()connection refused (This line repeated continuously)
I am able to input commands at this stage but I am not knowledgeable enough to know what to do.
When I push the power button to turn it off the computer beeps once and the led light flashes three times and turns off.
Each time when I attempt to boot either into Safe Mode or from the Software Install DVD I encounter the same problem.
Now, Monday night by chance on another boot attempt the computer started up although it took about 20-30 minutes. It was missing one volume which showed up in Disk Utility under a different name. While I had the computer up I backed up what I could on the volumes that mounted. One file I was unable to burn using Toast 9 due to a data fork error. The computer eventually froze during my activities and since I have had no luck at my start up attempts and have had the same problem. Luckily, I was able to back up everything I needed with the exception of what was on the AWOL volume.
The last thing I had installed recently was the latest Security Update which went fine and was two days before the trouble started.
I am at a loss for what to do next. I would like to retrieve the files on that one volume but at this point if I can start up I would just like to reformat and install the OS.
Any help with this problem would be much appreciated. Thank you.

Well, originally when I ran Disk Utility, although it performed slower than usaual it found the error as previously mentioned and was unable to Repair Volume. As to using the Hardware Disc & Install Discs(original & Tiger) the computer failed to boot although you could hear the disc spinnning for awhile. In both and every instance regardless of any or no disc, the computer starts the boot process and you see the gray screen with white apple and loading indicator for about 3 minutes then it switches to the blue screen with loading indicator. After quite some time the loading indicator goes away and it's just a blue screen for nearly a half-hour followed by a black screen which starts the above prompt. I can post all of what that said later as I have written all of it down at home, a portion of it is in my original post. The start up chime doesn't sound at all. I do get a tone and flashing LED lights when I hold the power button down to turn it off after the above described boot process. There is not much I can do except try and try again. I may need to get a new hard drive but I would like to resolve it without doing so if possible. When trying to boot from both discs I was holding down the C key as directed and I have tried just letting the computer boot with disc in drive without any key interaction.

Lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

lightroom 5 on a Mac os 10.8.5 will not start. It fails to open. And it worked fine the other day.

Reh... Doesn't work on my 2012 Mac mini. A function key set in Sys Prefs worked in Leopard and Lion on my MB but I cannot get any key to work using SysPref Dictation & Speech. It is befuddling and now I have to go to Edit-Speech to turn on and turn off speech to selected text.
I have used Macs and Apple 2es since cave man days and Apple is becoming so befuddling I am wondering if there is even an advantage to it over Windows XP. I spent a lot on this little box, it looks good (the first one had to be exchanged as it wouldn't link to my keyboard ???) but Apple intuitive does no longer seem meaningful.
If speech to text no longer is accessible by short cuts using Fkeys, why bother to have it in Syst Prefs?
Apple is losing its way. The pleasure is gone and no one at Apple seems to care.

My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

I purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

i purchased i phone 3GS from San francisco thro my brother, when i brought to oman, i want to update ios 5 to ios 6 for that from itunes to start update , finally failed and i could not able to configure in oman wifi network, i dont have backup..help me..

Has your phone ever been hacked or jailbroken. This error message is what usually shows up for that. Are you using a supported carrier for the iPhone, or did someone hack the phone to unlock it to be used on another carrier. If that is the case, then there is no help you can get here as discussing hacked/jailbroken devices is not allowed.

Errors Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.

Hi There,
I'm getting the errors below and but I have not got any BSOD.
The errors I'm getting in eventviewer are Pku2ulog failed to start 0xC--35, Negolog failed to start, IDListenLog failed to start, P2PLog failed to start and HomegroupLog failed to start, all with the same failure code 0xC-- 35.
This is what the logs files says about each error.
Pku2ulog:
Unknown( 10): GUID=c36a26fb-03a9-d591-3984-dc17e4a48527 (No Format Information found).
p2plog:
Unknown( 89): GUID=fc9d5ca5-e6c8-627c-be74-e6e0a98bbf57 (No Format Information found).
negolog:
Unknown( 37): GUID=2553184f-6f2a-3198-ddb7-93ab1ad2d125 (No Format Information found).
idlistenlog:
Unknown( 10): GUID=418a567f-b393-1423-26aa-123149ef8882 (No Format Information found).
homegrouplog:
Unknown( 12): GUID=96f7a94a-4343-6ede-ff2b-dd1dafeed500 (No Format Information found).
However, the 'Unknown(xx)' number changes times to times.
Could you help me please?
Thank you very much for your attention.
Best Regards.

Hi,
If you have Home group set up, please go to Control Panel – Network and Sharing Center. Choose homegroup and sharing options and click “Leave the homegroup”.
Juke Chou
TechNet Community Support

Starting weblogic cluster and admin server on Win 2000 platform

Hi! Here's my problem scenario:
I'm running my WLS 8.1 application as WLS cluster on Win 2000 platform. I have
3 replicated WLS servers in my cluster and of course one WLS server as admin server
(4 WLS servers all together). I'm starting my WLS application using Win services
which behind a scene call win 2000 comand interpreter batch-file to start the
servers. Currently I have 4 different win 2000 services each calling different
batch-files to start a WLS server (4 all together). Here's my question:
Is there any way to start my cluster (3 managed WLS servers) and WLS admin server
from single win 2000 command file (using single win 2000 service). Using win 2000
AT-command interpreter command I can start executables and command(s) and command-files
at background at specific date and time, but I want to start my WLS application
on every win 2000 platform boot, is there any way to achieve this ???
Best Regards!
Jami

hi,
Thanks for stepping up!
But I wasn't using any clustering or loadbalancing.
Just a simple Admin server, Managed server set up.
256 Meg, Pentium box running Win 2000 premium edition.
I tried tweeking around the heap size too.... coz' the operations were slogging
like anything...
Bal
"Raja Mukherjee" <[email protected]> wrote:
It seems like network issue....do you have Windows Clustering/Load Balancing
service turned on by any chance? I would also use netmon to see the traffic
between the ips....
..raja
"Bala" <[email protected]> wrote in message
news:3b3a6c00$[email protected]..
hi,
I am looking at a strange behaviour with WLS6.0SP1 installed on WINDOWS2000 Premium.
I brought up the Admin server and a Managed server. After a while theAdmin Server
is compeletely
losing the control of the managed server (for no reason).
when I tried monitoring the managed server from the console, I couldnot
access
the manager server
and the status down (red ball). I tried restarting the Admin Server
in the discover mode - NO LUCK.
But when I restart the Managed server and go to the Web Based Admin
Console and refresh, it worked. But I dont think we should be doingthat
in a
production environment.
Did anybody come across such a problem before ???
Is this a problem with Win 2000 ???
coz' it never happened with NT workstation
thanks in advance

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; I download; I start installer; installation fails unexpectedly; installer rolls back installation; hardware seems PC capable;

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
I can consult Gateway; device drivers web sites; hardware drivers;
Please Email Deanallen@ a*l.com
< Email Edited By Host >

Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support

Time Machine starts backup then fails

I'm trying to use Time Machine to backup wirelessly to Time Capsule. It starts but then fails after about 40 Mb, telling me an error occurred.
I've browsed these forums and tried reading Console Messages, but they don't mean much to me.
This is the first of 6 similar messages.
07/03/08 7:11:02 com.apple.backupd[49744] 2008-03-07 07:11:02.298 diskimages-helper[49755:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
Does anyone have any suggestions ? Am I on the right track ?

I'm trying to use Time Machine to backup wirelessly to Time Capsule. It starts but then fails after about 40 Mb, telling me an error occurred.
I've browsed these forums and tried reading Console Messages, but they don't mean much to me.
This is the first of 6 similar messages.
07/03/08 7:11:02 com.apple.backupd[49744] 2008-03-07 07:11:02.298 diskimages-helper[49755:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
Does anyone have any suggestions ? Am I on the right track ?

Start a cluster locally with 2 nodes

Hi,
I just want to ask that how to start a cluster locally with 2 nodes?
By default i think that it starts only 1.
Thanks

Hi,
Just start another instance of the same process using the same coherence configuration and they will form a cluster.
mark

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Starting OCFS2 cluster fails

Similar Messages

Maybe you are looking for